root / hw / pflash_cfi01.c @ 505da599
History | View | Annotate | Download (17.5 kB)
1 |
/*
|
---|---|
2 |
* CFI parallel flash with Intel command set emulation
|
3 |
*
|
4 |
* Copyright (c) 2006 Thorsten Zitterell
|
5 |
* Copyright (c) 2005 Jocelyn Mayer
|
6 |
*
|
7 |
* This library is free software; you can redistribute it and/or
|
8 |
* modify it under the terms of the GNU Lesser General Public
|
9 |
* License as published by the Free Software Foundation; either
|
10 |
* version 2 of the License, or (at your option) any later version.
|
11 |
*
|
12 |
* This library is distributed in the hope that it will be useful,
|
13 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
14 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
15 |
* Lesser General Public License for more details.
|
16 |
*
|
17 |
* You should have received a copy of the GNU Lesser General Public
|
18 |
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
|
19 |
*/
|
20 |
|
21 |
/*
|
22 |
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
23 |
* Supported commands/modes are:
|
24 |
* - flash read
|
25 |
* - flash write
|
26 |
* - flash ID read
|
27 |
* - sector erase
|
28 |
* - CFI queries
|
29 |
*
|
30 |
* It does not support timings
|
31 |
* It does not support flash interleaving
|
32 |
* It does not implement software data protection as found in many real chips
|
33 |
* It does not implement erase suspend/resume commands
|
34 |
* It does not implement multiple sectors erase
|
35 |
*
|
36 |
* It does not implement much more ...
|
37 |
*/
|
38 |
|
39 |
#include "hw.h" |
40 |
#include "flash.h" |
41 |
#include "block.h" |
42 |
#include "qemu-timer.h" |
43 |
|
44 |
#define PFLASH_BUG(fmt, ...) \
|
45 |
do { \
|
46 |
printf("PFLASH: Possible BUG - " fmt, ## __VA_ARGS__); \ |
47 |
exit(1); \
|
48 |
} while(0) |
49 |
|
50 |
/* #define PFLASH_DEBUG */
|
51 |
#ifdef PFLASH_DEBUG
|
52 |
#define DPRINTF(fmt, ...) \
|
53 |
do { \
|
54 |
printf("PFLASH: " fmt , ## __VA_ARGS__); \ |
55 |
} while (0) |
56 |
#else
|
57 |
#define DPRINTF(fmt, ...) do { } while (0) |
58 |
#endif
|
59 |
|
60 |
struct pflash_t {
|
61 |
BlockDriverState *bs; |
62 |
target_phys_addr_t base; |
63 |
target_phys_addr_t sector_len; |
64 |
target_phys_addr_t total_len; |
65 |
int width;
|
66 |
int wcycle; /* if 0, the flash is read normally */ |
67 |
int bypass;
|
68 |
int ro;
|
69 |
uint8_t cmd; |
70 |
uint8_t status; |
71 |
uint16_t ident[4];
|
72 |
uint8_t cfi_len; |
73 |
uint8_t cfi_table[0x52];
|
74 |
target_phys_addr_t counter; |
75 |
QEMUTimer *timer; |
76 |
ram_addr_t off; |
77 |
int fl_mem;
|
78 |
void *storage;
|
79 |
}; |
80 |
|
81 |
static void pflash_timer (void *opaque) |
82 |
{ |
83 |
pflash_t *pfl = opaque; |
84 |
|
85 |
DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
|
86 |
/* Reset flash */
|
87 |
pfl->status ^= 0x80;
|
88 |
if (pfl->bypass) {
|
89 |
pfl->wcycle = 2;
|
90 |
} else {
|
91 |
cpu_register_physical_memory(pfl->base, pfl->total_len, |
92 |
pfl->off | IO_MEM_ROMD | pfl->fl_mem); |
93 |
pfl->wcycle = 0;
|
94 |
} |
95 |
pfl->cmd = 0;
|
96 |
} |
97 |
|
98 |
static uint32_t pflash_read (pflash_t *pfl, target_phys_addr_t offset,
|
99 |
int width)
|
100 |
{ |
101 |
target_phys_addr_t boff; |
102 |
uint32_t ret; |
103 |
uint8_t *p; |
104 |
|
105 |
ret = -1;
|
106 |
boff = offset & 0xFF; /* why this here ?? */ |
107 |
|
108 |
if (pfl->width == 2) |
109 |
boff = boff >> 1;
|
110 |
else if (pfl->width == 4) |
111 |
boff = boff >> 2;
|
112 |
|
113 |
DPRINTF("%s: reading offset " TARGET_FMT_lx " under cmd %02x width %d\n", |
114 |
__func__, offset, pfl->cmd, width); |
115 |
|
116 |
switch (pfl->cmd) {
|
117 |
case 0x00: |
118 |
/* Flash area read */
|
119 |
p = pfl->storage; |
120 |
switch (width) {
|
121 |
case 1: |
122 |
ret = p[offset]; |
123 |
DPRINTF("%s: data offset " TARGET_FMT_lx " %02x\n", |
124 |
__func__, offset, ret); |
125 |
break;
|
126 |
case 2: |
127 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
128 |
ret = p[offset] << 8;
|
129 |
ret |= p[offset + 1];
|
130 |
#else
|
131 |
ret = p[offset]; |
132 |
ret |= p[offset + 1] << 8; |
133 |
#endif
|
134 |
DPRINTF("%s: data offset " TARGET_FMT_lx " %04x\n", |
135 |
__func__, offset, ret); |
136 |
break;
|
137 |
case 4: |
138 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
139 |
ret = p[offset] << 24;
|
140 |
ret |= p[offset + 1] << 16; |
141 |
ret |= p[offset + 2] << 8; |
142 |
ret |= p[offset + 3];
|
143 |
#else
|
144 |
ret = p[offset]; |
145 |
ret |= p[offset + 1] << 8; |
146 |
ret |= p[offset + 1] << 8; |
147 |
ret |= p[offset + 2] << 16; |
148 |
ret |= p[offset + 3] << 24; |
149 |
#endif
|
150 |
DPRINTF("%s: data offset " TARGET_FMT_lx " %08x\n", |
151 |
__func__, offset, ret); |
152 |
break;
|
153 |
default:
|
154 |
DPRINTF("BUG in %s\n", __func__);
|
155 |
} |
156 |
|
157 |
break;
|
158 |
case 0x20: /* Block erase */ |
159 |
case 0x50: /* Clear status register */ |
160 |
case 0x60: /* Block /un)lock */ |
161 |
case 0x70: /* Status Register */ |
162 |
case 0xe8: /* Write block */ |
163 |
/* Status register read */
|
164 |
ret = pfl->status; |
165 |
DPRINTF("%s: status %x\n", __func__, ret);
|
166 |
break;
|
167 |
case 0x98: /* Query mode */ |
168 |
if (boff > pfl->cfi_len)
|
169 |
ret = 0;
|
170 |
else
|
171 |
ret = pfl->cfi_table[boff]; |
172 |
break;
|
173 |
default:
|
174 |
/* This should never happen : reset state & treat it as a read */
|
175 |
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
176 |
pfl->wcycle = 0;
|
177 |
pfl->cmd = 0;
|
178 |
} |
179 |
return ret;
|
180 |
} |
181 |
|
182 |
/* update flash content on disk */
|
183 |
static void pflash_update(pflash_t *pfl, int offset, |
184 |
int size)
|
185 |
{ |
186 |
int offset_end;
|
187 |
if (pfl->bs) {
|
188 |
offset_end = offset + size; |
189 |
/* round to sectors */
|
190 |
offset = offset >> 9;
|
191 |
offset_end = (offset_end + 511) >> 9; |
192 |
bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
|
193 |
offset_end - offset); |
194 |
} |
195 |
} |
196 |
|
197 |
static void inline pflash_data_write(pflash_t *pfl, target_phys_addr_t offset, |
198 |
uint32_t value, int width)
|
199 |
{ |
200 |
uint8_t *p = pfl->storage; |
201 |
|
202 |
DPRINTF("%s: block write offset " TARGET_FMT_lx
|
203 |
" value %x counter " TARGET_FMT_lx "\n", |
204 |
__func__, offset, value, pfl->counter); |
205 |
switch (width) {
|
206 |
case 1: |
207 |
p[offset] = value; |
208 |
pflash_update(pfl, offset, 1);
|
209 |
break;
|
210 |
case 2: |
211 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
212 |
p[offset] = value >> 8;
|
213 |
p[offset + 1] = value;
|
214 |
#else
|
215 |
p[offset] = value; |
216 |
p[offset + 1] = value >> 8; |
217 |
#endif
|
218 |
pflash_update(pfl, offset, 2);
|
219 |
break;
|
220 |
case 4: |
221 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
222 |
p[offset] = value >> 24;
|
223 |
p[offset + 1] = value >> 16; |
224 |
p[offset + 2] = value >> 8; |
225 |
p[offset + 3] = value;
|
226 |
#else
|
227 |
p[offset] = value; |
228 |
p[offset + 1] = value >> 8; |
229 |
p[offset + 2] = value >> 16; |
230 |
p[offset + 3] = value >> 24; |
231 |
#endif
|
232 |
pflash_update(pfl, offset, 4);
|
233 |
break;
|
234 |
} |
235 |
|
236 |
} |
237 |
|
238 |
static void pflash_write(pflash_t *pfl, target_phys_addr_t offset, |
239 |
uint32_t value, int width)
|
240 |
{ |
241 |
target_phys_addr_t boff; |
242 |
uint8_t *p; |
243 |
uint8_t cmd; |
244 |
|
245 |
cmd = value; |
246 |
|
247 |
DPRINTF("%s: writing offset " TARGET_FMT_lx " value %08x width %d wcycle 0x%x\n", |
248 |
__func__, offset, value, width, pfl->wcycle); |
249 |
|
250 |
/* Set the device in I/O access mode */
|
251 |
cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem); |
252 |
boff = offset & (pfl->sector_len - 1);
|
253 |
|
254 |
if (pfl->width == 2) |
255 |
boff = boff >> 1;
|
256 |
else if (pfl->width == 4) |
257 |
boff = boff >> 2;
|
258 |
|
259 |
switch (pfl->wcycle) {
|
260 |
case 0: |
261 |
/* read mode */
|
262 |
switch (cmd) {
|
263 |
case 0x00: /* ??? */ |
264 |
goto reset_flash;
|
265 |
case 0x10: /* Single Byte Program */ |
266 |
case 0x40: /* Single Byte Program */ |
267 |
DPRINTF(stderr, "%s: Single Byte Program\n", __func__);
|
268 |
break;
|
269 |
case 0x20: /* Block erase */ |
270 |
p = pfl->storage; |
271 |
offset &= ~(pfl->sector_len - 1);
|
272 |
|
273 |
DPRINTF("%s: block erase at " TARGET_FMT_lx " bytes " |
274 |
TARGET_FMT_lx "\n",
|
275 |
__func__, offset, pfl->sector_len); |
276 |
|
277 |
memset(p + offset, 0xff, pfl->sector_len);
|
278 |
pflash_update(pfl, offset, pfl->sector_len); |
279 |
pfl->status |= 0x80; /* Ready! */ |
280 |
break;
|
281 |
case 0x50: /* Clear status bits */ |
282 |
DPRINTF("%s: Clear status bits\n", __func__);
|
283 |
pfl->status = 0x0;
|
284 |
goto reset_flash;
|
285 |
case 0x60: /* Block (un)lock */ |
286 |
DPRINTF("%s: Block unlock\n", __func__);
|
287 |
break;
|
288 |
case 0x70: /* Status Register */ |
289 |
DPRINTF("%s: Read status register\n", __func__);
|
290 |
pfl->cmd = cmd; |
291 |
return;
|
292 |
case 0x98: /* CFI query */ |
293 |
DPRINTF("%s: CFI query\n", __func__);
|
294 |
break;
|
295 |
case 0xe8: /* Write to buffer */ |
296 |
DPRINTF("%s: Write to buffer\n", __func__);
|
297 |
pfl->status |= 0x80; /* Ready! */ |
298 |
break;
|
299 |
case 0xff: /* Read array mode */ |
300 |
DPRINTF("%s: Read array mode\n", __func__);
|
301 |
goto reset_flash;
|
302 |
default:
|
303 |
goto error_flash;
|
304 |
} |
305 |
pfl->wcycle++; |
306 |
pfl->cmd = cmd; |
307 |
return;
|
308 |
case 1: |
309 |
switch (pfl->cmd) {
|
310 |
case 0x10: /* Single Byte Program */ |
311 |
case 0x40: /* Single Byte Program */ |
312 |
DPRINTF("%s: Single Byte Program\n", __func__);
|
313 |
pflash_data_write(pfl, offset, value, width); |
314 |
pfl->status |= 0x80; /* Ready! */ |
315 |
pfl->wcycle = 0;
|
316 |
break;
|
317 |
case 0x20: /* Block erase */ |
318 |
case 0x28: |
319 |
if (cmd == 0xd0) { /* confirm */ |
320 |
pfl->wcycle = 0;
|
321 |
pfl->status |= 0x80;
|
322 |
} else if (cmd == 0xff) { /* read array mode */ |
323 |
goto reset_flash;
|
324 |
} else
|
325 |
goto error_flash;
|
326 |
|
327 |
break;
|
328 |
case 0xe8: |
329 |
DPRINTF("%s: block write of %x bytes\n", __func__, value);
|
330 |
pfl->counter = value; |
331 |
pfl->wcycle++; |
332 |
break;
|
333 |
case 0x60: |
334 |
if (cmd == 0xd0) { |
335 |
pfl->wcycle = 0;
|
336 |
pfl->status |= 0x80;
|
337 |
} else if (cmd == 0x01) { |
338 |
pfl->wcycle = 0;
|
339 |
pfl->status |= 0x80;
|
340 |
} else if (cmd == 0xff) { |
341 |
goto reset_flash;
|
342 |
} else {
|
343 |
DPRINTF("%s: Unknown (un)locking command\n", __func__);
|
344 |
goto reset_flash;
|
345 |
} |
346 |
break;
|
347 |
case 0x98: |
348 |
if (cmd == 0xff) { |
349 |
goto reset_flash;
|
350 |
} else {
|
351 |
DPRINTF("%s: leaving query mode\n", __func__);
|
352 |
} |
353 |
break;
|
354 |
default:
|
355 |
goto error_flash;
|
356 |
} |
357 |
return;
|
358 |
case 2: |
359 |
switch (pfl->cmd) {
|
360 |
case 0xe8: /* Block write */ |
361 |
pflash_data_write(pfl, offset, value, width); |
362 |
|
363 |
pfl->status |= 0x80;
|
364 |
|
365 |
if (!pfl->counter) {
|
366 |
DPRINTF("%s: block write finished\n", __func__);
|
367 |
pfl->wcycle++; |
368 |
} |
369 |
|
370 |
pfl->counter--; |
371 |
break;
|
372 |
default:
|
373 |
goto error_flash;
|
374 |
} |
375 |
return;
|
376 |
case 3: /* Confirm mode */ |
377 |
switch (pfl->cmd) {
|
378 |
case 0xe8: /* Block write */ |
379 |
if (cmd == 0xd0) { |
380 |
pfl->wcycle = 0;
|
381 |
pfl->status |= 0x80;
|
382 |
} else {
|
383 |
DPRINTF("%s: unknown command for \"write block\"\n", __func__);
|
384 |
PFLASH_BUG("Write block confirm");
|
385 |
goto reset_flash;
|
386 |
} |
387 |
break;
|
388 |
default:
|
389 |
goto error_flash;
|
390 |
} |
391 |
return;
|
392 |
default:
|
393 |
/* Should never happen */
|
394 |
DPRINTF("%s: invalid write state\n", __func__);
|
395 |
goto reset_flash;
|
396 |
} |
397 |
return;
|
398 |
|
399 |
error_flash:
|
400 |
printf("%s: Unimplemented flash cmd sequence "
|
401 |
"(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)\n", |
402 |
__func__, offset, pfl->wcycle, pfl->cmd, value); |
403 |
|
404 |
reset_flash:
|
405 |
cpu_register_physical_memory(pfl->base, pfl->total_len, |
406 |
pfl->off | IO_MEM_ROMD | pfl->fl_mem); |
407 |
|
408 |
pfl->bypass = 0;
|
409 |
pfl->wcycle = 0;
|
410 |
pfl->cmd = 0;
|
411 |
return;
|
412 |
} |
413 |
|
414 |
|
415 |
static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr) |
416 |
{ |
417 |
return pflash_read(opaque, addr, 1); |
418 |
} |
419 |
|
420 |
static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr) |
421 |
{ |
422 |
pflash_t *pfl = opaque; |
423 |
|
424 |
return pflash_read(pfl, addr, 2); |
425 |
} |
426 |
|
427 |
static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr) |
428 |
{ |
429 |
pflash_t *pfl = opaque; |
430 |
|
431 |
return pflash_read(pfl, addr, 4); |
432 |
} |
433 |
|
434 |
static void pflash_writeb (void *opaque, target_phys_addr_t addr, |
435 |
uint32_t value) |
436 |
{ |
437 |
pflash_write(opaque, addr, value, 1);
|
438 |
} |
439 |
|
440 |
static void pflash_writew (void *opaque, target_phys_addr_t addr, |
441 |
uint32_t value) |
442 |
{ |
443 |
pflash_t *pfl = opaque; |
444 |
|
445 |
pflash_write(pfl, addr, value, 2);
|
446 |
} |
447 |
|
448 |
static void pflash_writel (void *opaque, target_phys_addr_t addr, |
449 |
uint32_t value) |
450 |
{ |
451 |
pflash_t *pfl = opaque; |
452 |
|
453 |
pflash_write(pfl, addr, value, 4);
|
454 |
} |
455 |
|
456 |
static CPUWriteMemoryFunc * const pflash_write_ops[] = { |
457 |
&pflash_writeb, |
458 |
&pflash_writew, |
459 |
&pflash_writel, |
460 |
}; |
461 |
|
462 |
static CPUReadMemoryFunc * const pflash_read_ops[] = { |
463 |
&pflash_readb, |
464 |
&pflash_readw, |
465 |
&pflash_readl, |
466 |
}; |
467 |
|
468 |
/* Count trailing zeroes of a 32 bits quantity */
|
469 |
static int ctz32 (uint32_t n) |
470 |
{ |
471 |
int ret;
|
472 |
|
473 |
ret = 0;
|
474 |
if (!(n & 0xFFFF)) { |
475 |
ret += 16;
|
476 |
n = n >> 16;
|
477 |
} |
478 |
if (!(n & 0xFF)) { |
479 |
ret += 8;
|
480 |
n = n >> 8;
|
481 |
} |
482 |
if (!(n & 0xF)) { |
483 |
ret += 4;
|
484 |
n = n >> 4;
|
485 |
} |
486 |
if (!(n & 0x3)) { |
487 |
ret += 2;
|
488 |
n = n >> 2;
|
489 |
} |
490 |
if (!(n & 0x1)) { |
491 |
ret++; |
492 |
n = n >> 1;
|
493 |
} |
494 |
#if 0 /* This is not necessary as n is never 0 */
|
495 |
if (!n)
|
496 |
ret++;
|
497 |
#endif
|
498 |
|
499 |
return ret;
|
500 |
} |
501 |
|
502 |
pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off, |
503 |
BlockDriverState *bs, uint32_t sector_len, |
504 |
int nb_blocs, int width, |
505 |
uint16_t id0, uint16_t id1, |
506 |
uint16_t id2, uint16_t id3) |
507 |
{ |
508 |
pflash_t *pfl; |
509 |
target_phys_addr_t total_len; |
510 |
int ret;
|
511 |
|
512 |
total_len = sector_len * nb_blocs; |
513 |
|
514 |
/* XXX: to be fixed */
|
515 |
#if 0
|
516 |
if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
|
517 |
total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
|
518 |
return NULL;
|
519 |
#endif
|
520 |
|
521 |
pfl = qemu_mallocz(sizeof(pflash_t));
|
522 |
|
523 |
/* FIXME: Allocate ram ourselves. */
|
524 |
pfl->storage = qemu_get_ram_ptr(off); |
525 |
pfl->fl_mem = cpu_register_io_memory( |
526 |
pflash_read_ops, pflash_write_ops, pfl); |
527 |
pfl->off = off; |
528 |
cpu_register_physical_memory(base, total_len, |
529 |
off | pfl->fl_mem | IO_MEM_ROMD); |
530 |
|
531 |
pfl->bs = bs; |
532 |
if (pfl->bs) {
|
533 |
/* read the initial flash content */
|
534 |
ret = bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9); |
535 |
if (ret < 0) { |
536 |
cpu_unregister_io_memory(pfl->fl_mem); |
537 |
qemu_free(pfl); |
538 |
return NULL; |
539 |
} |
540 |
} |
541 |
#if 0 /* XXX: there should be a bit to set up read-only,
|
542 |
* the same way the hardware does (with WP pin).
|
543 |
*/
|
544 |
pfl->ro = 1;
|
545 |
#else
|
546 |
pfl->ro = 0;
|
547 |
#endif
|
548 |
pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl); |
549 |
pfl->base = base; |
550 |
pfl->sector_len = sector_len; |
551 |
pfl->total_len = total_len; |
552 |
pfl->width = width; |
553 |
pfl->wcycle = 0;
|
554 |
pfl->cmd = 0;
|
555 |
pfl->status = 0;
|
556 |
pfl->ident[0] = id0;
|
557 |
pfl->ident[1] = id1;
|
558 |
pfl->ident[2] = id2;
|
559 |
pfl->ident[3] = id3;
|
560 |
/* Hardcoded CFI table */
|
561 |
pfl->cfi_len = 0x52;
|
562 |
/* Standard "QRY" string */
|
563 |
pfl->cfi_table[0x10] = 'Q'; |
564 |
pfl->cfi_table[0x11] = 'R'; |
565 |
pfl->cfi_table[0x12] = 'Y'; |
566 |
/* Command set (Intel) */
|
567 |
pfl->cfi_table[0x13] = 0x01; |
568 |
pfl->cfi_table[0x14] = 0x00; |
569 |
/* Primary extended table address (none) */
|
570 |
pfl->cfi_table[0x15] = 0x31; |
571 |
pfl->cfi_table[0x16] = 0x00; |
572 |
/* Alternate command set (none) */
|
573 |
pfl->cfi_table[0x17] = 0x00; |
574 |
pfl->cfi_table[0x18] = 0x00; |
575 |
/* Alternate extended table (none) */
|
576 |
pfl->cfi_table[0x19] = 0x00; |
577 |
pfl->cfi_table[0x1A] = 0x00; |
578 |
/* Vcc min */
|
579 |
pfl->cfi_table[0x1B] = 0x45; |
580 |
/* Vcc max */
|
581 |
pfl->cfi_table[0x1C] = 0x55; |
582 |
/* Vpp min (no Vpp pin) */
|
583 |
pfl->cfi_table[0x1D] = 0x00; |
584 |
/* Vpp max (no Vpp pin) */
|
585 |
pfl->cfi_table[0x1E] = 0x00; |
586 |
/* Reserved */
|
587 |
pfl->cfi_table[0x1F] = 0x07; |
588 |
/* Timeout for min size buffer write */
|
589 |
pfl->cfi_table[0x20] = 0x07; |
590 |
/* Typical timeout for block erase */
|
591 |
pfl->cfi_table[0x21] = 0x0a; |
592 |
/* Typical timeout for full chip erase (4096 ms) */
|
593 |
pfl->cfi_table[0x22] = 0x00; |
594 |
/* Reserved */
|
595 |
pfl->cfi_table[0x23] = 0x04; |
596 |
/* Max timeout for buffer write */
|
597 |
pfl->cfi_table[0x24] = 0x04; |
598 |
/* Max timeout for block erase */
|
599 |
pfl->cfi_table[0x25] = 0x04; |
600 |
/* Max timeout for chip erase */
|
601 |
pfl->cfi_table[0x26] = 0x00; |
602 |
/* Device size */
|
603 |
pfl->cfi_table[0x27] = ctz32(total_len); // + 1; |
604 |
/* Flash device interface (8 & 16 bits) */
|
605 |
pfl->cfi_table[0x28] = 0x02; |
606 |
pfl->cfi_table[0x29] = 0x00; |
607 |
/* Max number of bytes in multi-bytes write */
|
608 |
pfl->cfi_table[0x2A] = 0x0B; |
609 |
pfl->cfi_table[0x2B] = 0x00; |
610 |
/* Number of erase block regions (uniform) */
|
611 |
pfl->cfi_table[0x2C] = 0x01; |
612 |
/* Erase block region 1 */
|
613 |
pfl->cfi_table[0x2D] = nb_blocs - 1; |
614 |
pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8; |
615 |
pfl->cfi_table[0x2F] = sector_len >> 8; |
616 |
pfl->cfi_table[0x30] = sector_len >> 16; |
617 |
|
618 |
/* Extended */
|
619 |
pfl->cfi_table[0x31] = 'P'; |
620 |
pfl->cfi_table[0x32] = 'R'; |
621 |
pfl->cfi_table[0x33] = 'I'; |
622 |
|
623 |
pfl->cfi_table[0x34] = '1'; |
624 |
pfl->cfi_table[0x35] = '1'; |
625 |
|
626 |
pfl->cfi_table[0x36] = 0x00; |
627 |
pfl->cfi_table[0x37] = 0x00; |
628 |
pfl->cfi_table[0x38] = 0x00; |
629 |
pfl->cfi_table[0x39] = 0x00; |
630 |
|
631 |
pfl->cfi_table[0x3a] = 0x00; |
632 |
|
633 |
pfl->cfi_table[0x3b] = 0x00; |
634 |
pfl->cfi_table[0x3c] = 0x00; |
635 |
|
636 |
return pfl;
|
637 |
} |