root / hw / wm8750.c @ 64d50b8b
History | View | Annotate | Download (21.1 kB)
1 |
/*
|
---|---|
2 |
* WM8750 audio CODEC.
|
3 |
*
|
4 |
* Copyright (c) 2006 Openedhand Ltd.
|
5 |
* Written by Andrzej Zaborowski <balrog@zabor.org>
|
6 |
*
|
7 |
* This file is licensed under GNU GPL.
|
8 |
*/
|
9 |
|
10 |
#include "hw.h" |
11 |
#include "i2c.h" |
12 |
#include "audio/audio.h" |
13 |
|
14 |
#define IN_PORT_N 3 |
15 |
#define OUT_PORT_N 3 |
16 |
|
17 |
#define CODEC "wm8750" |
18 |
|
19 |
typedef struct { |
20 |
int adc;
|
21 |
int adc_hz;
|
22 |
int dac;
|
23 |
int dac_hz;
|
24 |
} WMRate; |
25 |
|
26 |
typedef struct { |
27 |
i2c_slave i2c; |
28 |
uint8_t i2c_data[2];
|
29 |
int i2c_len;
|
30 |
QEMUSoundCard card; |
31 |
SWVoiceIn *adc_voice[IN_PORT_N]; |
32 |
SWVoiceOut *dac_voice[OUT_PORT_N]; |
33 |
int enable;
|
34 |
void (*data_req)(void *, int, int); |
35 |
void *opaque;
|
36 |
uint8_t data_in[4096];
|
37 |
uint8_t data_out[4096];
|
38 |
int idx_in, req_in;
|
39 |
int idx_out, req_out;
|
40 |
|
41 |
SWVoiceOut **out[2];
|
42 |
uint8_t outvol[7], outmute[2]; |
43 |
SWVoiceIn **in[2];
|
44 |
uint8_t invol[4], inmute[2]; |
45 |
|
46 |
uint8_t diff[2], pol, ds, monomix[2], alc, mute; |
47 |
uint8_t path[4], mpath[2], power, format; |
48 |
const WMRate *rate;
|
49 |
int adc_hz, dac_hz, ext_adc_hz, ext_dac_hz, master;
|
50 |
} WM8750State; |
51 |
|
52 |
/* pow(10.0, -i / 20.0) * 255, i = 0..42 */
|
53 |
static const uint8_t wm8750_vol_db_table[] = { |
54 |
255, 227, 203, 181, 161, 143, 128, 114, 102, 90, 81, 72, 64, 57, 51, 45, |
55 |
40, 36, 32, 29, 26, 23, 20, 18, 16, 14, 13, 11, 10, 9, 8, 7, 6, 6, 5, 5, |
56 |
4, 4, 3, 3, 3, 2, 2 |
57 |
}; |
58 |
|
59 |
#define WM8750_OUTVOL_TRANSFORM(x) wm8750_vol_db_table[(0x7f - x) / 3] |
60 |
#define WM8750_INVOL_TRANSFORM(x) (x << 2) |
61 |
|
62 |
static inline void wm8750_in_load(WM8750State *s) |
63 |
{ |
64 |
int acquired;
|
65 |
if (s->idx_in + s->req_in <= sizeof(s->data_in)) |
66 |
return;
|
67 |
s->idx_in = audio_MAX(0, (int) sizeof(s->data_in) - s->req_in); |
68 |
acquired = AUD_read(*s->in[0], s->data_in + s->idx_in,
|
69 |
sizeof(s->data_in) - s->idx_in);
|
70 |
} |
71 |
|
72 |
static inline void wm8750_out_flush(WM8750State *s) |
73 |
{ |
74 |
int sent = 0; |
75 |
while (sent < s->idx_out)
|
76 |
sent += AUD_write(*s->out[0], s->data_out + sent, s->idx_out - sent)
|
77 |
?: s->idx_out; |
78 |
s->idx_out = 0;
|
79 |
} |
80 |
|
81 |
static void wm8750_audio_in_cb(void *opaque, int avail_b) |
82 |
{ |
83 |
WM8750State *s = (WM8750State *) opaque; |
84 |
s->req_in = avail_b; |
85 |
s->data_req(s->opaque, s->req_out >> 2, avail_b >> 2); |
86 |
} |
87 |
|
88 |
static void wm8750_audio_out_cb(void *opaque, int free_b) |
89 |
{ |
90 |
WM8750State *s = (WM8750State *) opaque; |
91 |
|
92 |
if (s->idx_out >= free_b) {
|
93 |
s->idx_out = free_b; |
94 |
s->req_out = 0;
|
95 |
wm8750_out_flush(s); |
96 |
} else
|
97 |
s->req_out = free_b - s->idx_out; |
98 |
|
99 |
s->data_req(s->opaque, s->req_out >> 2, s->req_in >> 2); |
100 |
} |
101 |
|
102 |
static const WMRate wm_rate_table[] = { |
103 |
{ 256, 48000, 256, 48000 }, /* SR: 00000 */ |
104 |
{ 384, 48000, 384, 48000 }, /* SR: 00001 */ |
105 |
{ 256, 48000, 1536, 8000 }, /* SR: 00010 */ |
106 |
{ 384, 48000, 2304, 8000 }, /* SR: 00011 */ |
107 |
{ 1536, 8000, 256, 48000 }, /* SR: 00100 */ |
108 |
{ 2304, 8000, 384, 48000 }, /* SR: 00101 */ |
109 |
{ 1536, 8000, 1536, 8000 }, /* SR: 00110 */ |
110 |
{ 2304, 8000, 2304, 8000 }, /* SR: 00111 */ |
111 |
{ 1024, 12000, 1024, 12000 }, /* SR: 01000 */ |
112 |
{ 1526, 12000, 1536, 12000 }, /* SR: 01001 */ |
113 |
{ 768, 16000, 768, 16000 }, /* SR: 01010 */ |
114 |
{ 1152, 16000, 1152, 16000 }, /* SR: 01011 */ |
115 |
{ 384, 32000, 384, 32000 }, /* SR: 01100 */ |
116 |
{ 576, 32000, 576, 32000 }, /* SR: 01101 */ |
117 |
{ 128, 96000, 128, 96000 }, /* SR: 01110 */ |
118 |
{ 192, 96000, 192, 96000 }, /* SR: 01111 */ |
119 |
{ 256, 44100, 256, 44100 }, /* SR: 10000 */ |
120 |
{ 384, 44100, 384, 44100 }, /* SR: 10001 */ |
121 |
{ 256, 44100, 1408, 8018 }, /* SR: 10010 */ |
122 |
{ 384, 44100, 2112, 8018 }, /* SR: 10011 */ |
123 |
{ 1408, 8018, 256, 44100 }, /* SR: 10100 */ |
124 |
{ 2112, 8018, 384, 44100 }, /* SR: 10101 */ |
125 |
{ 1408, 8018, 1408, 8018 }, /* SR: 10110 */ |
126 |
{ 2112, 8018, 2112, 8018 }, /* SR: 10111 */ |
127 |
{ 1024, 11025, 1024, 11025 }, /* SR: 11000 */ |
128 |
{ 1536, 11025, 1536, 11025 }, /* SR: 11001 */ |
129 |
{ 512, 22050, 512, 22050 }, /* SR: 11010 */ |
130 |
{ 768, 22050, 768, 22050 }, /* SR: 11011 */ |
131 |
{ 512, 24000, 512, 24000 }, /* SR: 11100 */ |
132 |
{ 768, 24000, 768, 24000 }, /* SR: 11101 */ |
133 |
{ 128, 88200, 128, 88200 }, /* SR: 11110 */ |
134 |
{ 192, 88200, 192, 88200 }, /* SR: 11111 */ |
135 |
}; |
136 |
|
137 |
static void wm8750_vol_update(WM8750State *s) |
138 |
{ |
139 |
/* FIXME: multiply all volumes by s->invol[2], s->invol[3] */
|
140 |
|
141 |
AUD_set_volume_in(s->adc_voice[0], s->mute,
|
142 |
s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]), |
143 |
s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1])); |
144 |
AUD_set_volume_in(s->adc_voice[1], s->mute,
|
145 |
s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]), |
146 |
s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1])); |
147 |
AUD_set_volume_in(s->adc_voice[2], s->mute,
|
148 |
s->inmute[0] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[0]), |
149 |
s->inmute[1] ? 0 : WM8750_INVOL_TRANSFORM(s->invol[1])); |
150 |
|
151 |
/* FIXME: multiply all volumes by s->outvol[0], s->outvol[1] */
|
152 |
|
153 |
/* Speaker: LOUT2VOL ROUT2VOL */
|
154 |
AUD_set_volume_out(s->dac_voice[0], s->mute,
|
155 |
s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[4]), |
156 |
s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[5])); |
157 |
|
158 |
/* Headphone: LOUT1VOL ROUT1VOL */
|
159 |
AUD_set_volume_out(s->dac_voice[1], s->mute,
|
160 |
s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[2]), |
161 |
s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[3])); |
162 |
|
163 |
/* MONOOUT: MONOVOL MONOVOL */
|
164 |
AUD_set_volume_out(s->dac_voice[2], s->mute,
|
165 |
s->outmute[0] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[6]), |
166 |
s->outmute[1] ? 0 : WM8750_OUTVOL_TRANSFORM(s->outvol[6])); |
167 |
} |
168 |
|
169 |
static void wm8750_set_format(WM8750State *s) |
170 |
{ |
171 |
int i;
|
172 |
struct audsettings in_fmt;
|
173 |
struct audsettings out_fmt;
|
174 |
struct audsettings monoout_fmt;
|
175 |
|
176 |
wm8750_out_flush(s); |
177 |
|
178 |
if (s->in[0] && *s->in[0]) |
179 |
AUD_set_active_in(*s->in[0], 0); |
180 |
if (s->out[0] && *s->out[0]) |
181 |
AUD_set_active_out(*s->out[0], 0); |
182 |
|
183 |
for (i = 0; i < IN_PORT_N; i ++) |
184 |
if (s->adc_voice[i]) {
|
185 |
AUD_close_in(&s->card, s->adc_voice[i]); |
186 |
s->adc_voice[i] = NULL;
|
187 |
} |
188 |
for (i = 0; i < OUT_PORT_N; i ++) |
189 |
if (s->dac_voice[i]) {
|
190 |
AUD_close_out(&s->card, s->dac_voice[i]); |
191 |
s->dac_voice[i] = NULL;
|
192 |
} |
193 |
|
194 |
if (!s->enable)
|
195 |
return;
|
196 |
|
197 |
/* Setup input */
|
198 |
in_fmt.endianness = 0;
|
199 |
in_fmt.nchannels = 2;
|
200 |
in_fmt.freq = s->adc_hz; |
201 |
in_fmt.fmt = AUD_FMT_S16; |
202 |
|
203 |
s->adc_voice[0] = AUD_open_in(&s->card, s->adc_voice[0], |
204 |
CODEC ".input1", s, wm8750_audio_in_cb, &in_fmt);
|
205 |
s->adc_voice[1] = AUD_open_in(&s->card, s->adc_voice[1], |
206 |
CODEC ".input2", s, wm8750_audio_in_cb, &in_fmt);
|
207 |
s->adc_voice[2] = AUD_open_in(&s->card, s->adc_voice[2], |
208 |
CODEC ".input3", s, wm8750_audio_in_cb, &in_fmt);
|
209 |
|
210 |
/* Setup output */
|
211 |
out_fmt.endianness = 0;
|
212 |
out_fmt.nchannels = 2;
|
213 |
out_fmt.freq = s->dac_hz; |
214 |
out_fmt.fmt = AUD_FMT_S16; |
215 |
monoout_fmt.endianness = 0;
|
216 |
monoout_fmt.nchannels = 1;
|
217 |
monoout_fmt.freq = s->rate->dac_hz; |
218 |
monoout_fmt.fmt = AUD_FMT_S16; |
219 |
|
220 |
s->dac_voice[0] = AUD_open_out(&s->card, s->dac_voice[0], |
221 |
CODEC ".speaker", s, wm8750_audio_out_cb, &out_fmt);
|
222 |
s->dac_voice[1] = AUD_open_out(&s->card, s->dac_voice[1], |
223 |
CODEC ".headphone", s, wm8750_audio_out_cb, &out_fmt);
|
224 |
/* MONOMIX is also in stereo for simplicity */
|
225 |
s->dac_voice[2] = AUD_open_out(&s->card, s->dac_voice[2], |
226 |
CODEC ".monomix", s, wm8750_audio_out_cb, &out_fmt);
|
227 |
/* no sense emulating OUT3 which is a mix of other outputs */
|
228 |
|
229 |
wm8750_vol_update(s); |
230 |
|
231 |
/* We should connect the left and right channels to their
|
232 |
* respective inputs/outputs but we have completely no need
|
233 |
* for mixing or combining paths to different ports, so we
|
234 |
* connect both channels to where the left channel is routed. */
|
235 |
if (s->in[0] && *s->in[0]) |
236 |
AUD_set_active_in(*s->in[0], 1); |
237 |
if (s->out[0] && *s->out[0]) |
238 |
AUD_set_active_out(*s->out[0], 1); |
239 |
} |
240 |
|
241 |
static void wm8750_clk_update(WM8750State *s, int ext) |
242 |
{ |
243 |
if (s->master || !s->ext_dac_hz)
|
244 |
s->dac_hz = s->rate->dac_hz; |
245 |
else
|
246 |
s->dac_hz = s->ext_dac_hz; |
247 |
|
248 |
if (s->master || !s->ext_adc_hz)
|
249 |
s->adc_hz = s->rate->adc_hz; |
250 |
else
|
251 |
s->adc_hz = s->ext_adc_hz; |
252 |
|
253 |
if (s->master || (!s->ext_dac_hz && !s->ext_adc_hz)) {
|
254 |
if (!ext)
|
255 |
wm8750_set_format(s); |
256 |
} else {
|
257 |
if (ext)
|
258 |
wm8750_set_format(s); |
259 |
} |
260 |
} |
261 |
|
262 |
static void wm8750_reset(i2c_slave *i2c) |
263 |
{ |
264 |
WM8750State *s = (WM8750State *) i2c; |
265 |
s->rate = &wm_rate_table[0];
|
266 |
s->enable = 0;
|
267 |
wm8750_clk_update(s, 1);
|
268 |
s->diff[0] = 0; |
269 |
s->diff[1] = 0; |
270 |
s->ds = 0;
|
271 |
s->alc = 0;
|
272 |
s->in[0] = &s->adc_voice[0]; |
273 |
s->invol[0] = 0x17; |
274 |
s->invol[1] = 0x17; |
275 |
s->invol[2] = 0xc3; |
276 |
s->invol[3] = 0xc3; |
277 |
s->out[0] = &s->dac_voice[0]; |
278 |
s->outvol[0] = 0xff; |
279 |
s->outvol[1] = 0xff; |
280 |
s->outvol[2] = 0x79; |
281 |
s->outvol[3] = 0x79; |
282 |
s->outvol[4] = 0x79; |
283 |
s->outvol[5] = 0x79; |
284 |
s->outvol[6] = 0x79; |
285 |
s->inmute[0] = 0; |
286 |
s->inmute[1] = 0; |
287 |
s->outmute[0] = 0; |
288 |
s->outmute[1] = 0; |
289 |
s->mute = 1;
|
290 |
s->path[0] = 0; |
291 |
s->path[1] = 0; |
292 |
s->path[2] = 0; |
293 |
s->path[3] = 0; |
294 |
s->mpath[0] = 0; |
295 |
s->mpath[1] = 0; |
296 |
s->format = 0x0a;
|
297 |
s->idx_in = sizeof(s->data_in);
|
298 |
s->req_in = 0;
|
299 |
s->idx_out = 0;
|
300 |
s->req_out = 0;
|
301 |
wm8750_vol_update(s); |
302 |
s->i2c_len = 0;
|
303 |
} |
304 |
|
305 |
static void wm8750_event(i2c_slave *i2c, enum i2c_event event) |
306 |
{ |
307 |
WM8750State *s = (WM8750State *) i2c; |
308 |
|
309 |
switch (event) {
|
310 |
case I2C_START_SEND:
|
311 |
s->i2c_len = 0;
|
312 |
break;
|
313 |
case I2C_FINISH:
|
314 |
#ifdef VERBOSE
|
315 |
if (s->i2c_len < 2) |
316 |
printf("%s: message too short (%i bytes)\n",
|
317 |
__FUNCTION__, s->i2c_len); |
318 |
#endif
|
319 |
break;
|
320 |
default:
|
321 |
break;
|
322 |
} |
323 |
} |
324 |
|
325 |
#define WM8750_LINVOL 0x00 |
326 |
#define WM8750_RINVOL 0x01 |
327 |
#define WM8750_LOUT1V 0x02 |
328 |
#define WM8750_ROUT1V 0x03 |
329 |
#define WM8750_ADCDAC 0x05 |
330 |
#define WM8750_IFACE 0x07 |
331 |
#define WM8750_SRATE 0x08 |
332 |
#define WM8750_LDAC 0x0a |
333 |
#define WM8750_RDAC 0x0b |
334 |
#define WM8750_BASS 0x0c |
335 |
#define WM8750_TREBLE 0x0d |
336 |
#define WM8750_RESET 0x0f |
337 |
#define WM8750_3D 0x10 |
338 |
#define WM8750_ALC1 0x11 |
339 |
#define WM8750_ALC2 0x12 |
340 |
#define WM8750_ALC3 0x13 |
341 |
#define WM8750_NGATE 0x14 |
342 |
#define WM8750_LADC 0x15 |
343 |
#define WM8750_RADC 0x16 |
344 |
#define WM8750_ADCTL1 0x17 |
345 |
#define WM8750_ADCTL2 0x18 |
346 |
#define WM8750_PWR1 0x19 |
347 |
#define WM8750_PWR2 0x1a |
348 |
#define WM8750_ADCTL3 0x1b |
349 |
#define WM8750_ADCIN 0x1f |
350 |
#define WM8750_LADCIN 0x20 |
351 |
#define WM8750_RADCIN 0x21 |
352 |
#define WM8750_LOUTM1 0x22 |
353 |
#define WM8750_LOUTM2 0x23 |
354 |
#define WM8750_ROUTM1 0x24 |
355 |
#define WM8750_ROUTM2 0x25 |
356 |
#define WM8750_MOUTM1 0x26 |
357 |
#define WM8750_MOUTM2 0x27 |
358 |
#define WM8750_LOUT2V 0x28 |
359 |
#define WM8750_ROUT2V 0x29 |
360 |
#define WM8750_MOUTV 0x2a |
361 |
|
362 |
static int wm8750_tx(i2c_slave *i2c, uint8_t data) |
363 |
{ |
364 |
WM8750State *s = (WM8750State *) i2c; |
365 |
uint8_t cmd; |
366 |
uint16_t value; |
367 |
|
368 |
if (s->i2c_len >= 2) { |
369 |
printf("%s: long message (%i bytes)\n", __FUNCTION__, s->i2c_len);
|
370 |
#ifdef VERBOSE
|
371 |
return 1; |
372 |
#endif
|
373 |
} |
374 |
s->i2c_data[s->i2c_len ++] = data; |
375 |
if (s->i2c_len != 2) |
376 |
return 0; |
377 |
|
378 |
cmd = s->i2c_data[0] >> 1; |
379 |
value = ((s->i2c_data[0] << 8) | s->i2c_data[1]) & 0x1ff; |
380 |
|
381 |
switch (cmd) {
|
382 |
case WM8750_LADCIN: /* ADC Signal Path Control (Left) */ |
383 |
s->diff[0] = (((value >> 6) & 3) == 3); /* LINSEL */ |
384 |
if (s->diff[0]) |
385 |
s->in[0] = &s->adc_voice[0 + s->ds * 1]; |
386 |
else
|
387 |
s->in[0] = &s->adc_voice[((value >> 6) & 3) * 1 + 0]; |
388 |
break;
|
389 |
|
390 |
case WM8750_RADCIN: /* ADC Signal Path Control (Right) */ |
391 |
s->diff[1] = (((value >> 6) & 3) == 3); /* RINSEL */ |
392 |
if (s->diff[1]) |
393 |
s->in[1] = &s->adc_voice[0 + s->ds * 1]; |
394 |
else
|
395 |
s->in[1] = &s->adc_voice[((value >> 6) & 3) * 1 + 0]; |
396 |
break;
|
397 |
|
398 |
case WM8750_ADCIN: /* ADC Input Mode */ |
399 |
s->ds = (value >> 8) & 1; /* DS */ |
400 |
if (s->diff[0]) |
401 |
s->in[0] = &s->adc_voice[0 + s->ds * 1]; |
402 |
if (s->diff[1]) |
403 |
s->in[1] = &s->adc_voice[0 + s->ds * 1]; |
404 |
s->monomix[0] = (value >> 6) & 3; /* MONOMIX */ |
405 |
break;
|
406 |
|
407 |
case WM8750_ADCTL1: /* Additional Control (1) */ |
408 |
s->monomix[1] = (value >> 1) & 1; /* DMONOMIX */ |
409 |
break;
|
410 |
|
411 |
case WM8750_PWR1: /* Power Management (1) */ |
412 |
s->enable = ((value >> 6) & 7) == 3; /* VMIDSEL, VREF */ |
413 |
wm8750_set_format(s); |
414 |
break;
|
415 |
|
416 |
case WM8750_LINVOL: /* Left Channel PGA */ |
417 |
s->invol[0] = value & 0x3f; /* LINVOL */ |
418 |
s->inmute[0] = (value >> 7) & 1; /* LINMUTE */ |
419 |
wm8750_vol_update(s); |
420 |
break;
|
421 |
|
422 |
case WM8750_RINVOL: /* Right Channel PGA */ |
423 |
s->invol[1] = value & 0x3f; /* RINVOL */ |
424 |
s->inmute[1] = (value >> 7) & 1; /* RINMUTE */ |
425 |
wm8750_vol_update(s); |
426 |
break;
|
427 |
|
428 |
case WM8750_ADCDAC: /* ADC and DAC Control */ |
429 |
s->pol = (value >> 5) & 3; /* ADCPOL */ |
430 |
s->mute = (value >> 3) & 1; /* DACMU */ |
431 |
wm8750_vol_update(s); |
432 |
break;
|
433 |
|
434 |
case WM8750_ADCTL3: /* Additional Control (3) */ |
435 |
break;
|
436 |
|
437 |
case WM8750_LADC: /* Left ADC Digital Volume */ |
438 |
s->invol[2] = value & 0xff; /* LADCVOL */ |
439 |
wm8750_vol_update(s); |
440 |
break;
|
441 |
|
442 |
case WM8750_RADC: /* Right ADC Digital Volume */ |
443 |
s->invol[3] = value & 0xff; /* RADCVOL */ |
444 |
wm8750_vol_update(s); |
445 |
break;
|
446 |
|
447 |
case WM8750_ALC1: /* ALC Control (1) */ |
448 |
s->alc = (value >> 7) & 3; /* ALCSEL */ |
449 |
break;
|
450 |
|
451 |
case WM8750_NGATE: /* Noise Gate Control */ |
452 |
case WM8750_3D: /* 3D enhance */ |
453 |
break;
|
454 |
|
455 |
case WM8750_LDAC: /* Left Channel Digital Volume */ |
456 |
s->outvol[0] = value & 0xff; /* LDACVOL */ |
457 |
wm8750_vol_update(s); |
458 |
break;
|
459 |
|
460 |
case WM8750_RDAC: /* Right Channel Digital Volume */ |
461 |
s->outvol[1] = value & 0xff; /* RDACVOL */ |
462 |
wm8750_vol_update(s); |
463 |
break;
|
464 |
|
465 |
case WM8750_BASS: /* Bass Control */ |
466 |
break;
|
467 |
|
468 |
case WM8750_LOUTM1: /* Left Mixer Control (1) */ |
469 |
s->path[0] = (value >> 8) & 1; /* LD2LO */ |
470 |
/* TODO: mute/unmute respective paths */
|
471 |
wm8750_vol_update(s); |
472 |
break;
|
473 |
|
474 |
case WM8750_LOUTM2: /* Left Mixer Control (2) */ |
475 |
s->path[1] = (value >> 8) & 1; /* RD2LO */ |
476 |
/* TODO: mute/unmute respective paths */
|
477 |
wm8750_vol_update(s); |
478 |
break;
|
479 |
|
480 |
case WM8750_ROUTM1: /* Right Mixer Control (1) */ |
481 |
s->path[2] = (value >> 8) & 1; /* LD2RO */ |
482 |
/* TODO: mute/unmute respective paths */
|
483 |
wm8750_vol_update(s); |
484 |
break;
|
485 |
|
486 |
case WM8750_ROUTM2: /* Right Mixer Control (2) */ |
487 |
s->path[3] = (value >> 8) & 1; /* RD2RO */ |
488 |
/* TODO: mute/unmute respective paths */
|
489 |
wm8750_vol_update(s); |
490 |
break;
|
491 |
|
492 |
case WM8750_MOUTM1: /* Mono Mixer Control (1) */ |
493 |
s->mpath[0] = (value >> 8) & 1; /* LD2MO */ |
494 |
/* TODO: mute/unmute respective paths */
|
495 |
wm8750_vol_update(s); |
496 |
break;
|
497 |
|
498 |
case WM8750_MOUTM2: /* Mono Mixer Control (2) */ |
499 |
s->mpath[1] = (value >> 8) & 1; /* RD2MO */ |
500 |
/* TODO: mute/unmute respective paths */
|
501 |
wm8750_vol_update(s); |
502 |
break;
|
503 |
|
504 |
case WM8750_LOUT1V: /* LOUT1 Volume */ |
505 |
s->outvol[2] = value & 0x7f; /* LOUT1VOL */ |
506 |
wm8750_vol_update(s); |
507 |
break;
|
508 |
|
509 |
case WM8750_LOUT2V: /* LOUT2 Volume */ |
510 |
s->outvol[4] = value & 0x7f; /* LOUT2VOL */ |
511 |
wm8750_vol_update(s); |
512 |
break;
|
513 |
|
514 |
case WM8750_ROUT1V: /* ROUT1 Volume */ |
515 |
s->outvol[3] = value & 0x7f; /* ROUT1VOL */ |
516 |
wm8750_vol_update(s); |
517 |
break;
|
518 |
|
519 |
case WM8750_ROUT2V: /* ROUT2 Volume */ |
520 |
s->outvol[5] = value & 0x7f; /* ROUT2VOL */ |
521 |
wm8750_vol_update(s); |
522 |
break;
|
523 |
|
524 |
case WM8750_MOUTV: /* MONOOUT Volume */ |
525 |
s->outvol[6] = value & 0x7f; /* MONOOUTVOL */ |
526 |
wm8750_vol_update(s); |
527 |
break;
|
528 |
|
529 |
case WM8750_ADCTL2: /* Additional Control (2) */ |
530 |
break;
|
531 |
|
532 |
case WM8750_PWR2: /* Power Management (2) */ |
533 |
s->power = value & 0x7e;
|
534 |
/* TODO: mute/unmute respective paths */
|
535 |
wm8750_vol_update(s); |
536 |
break;
|
537 |
|
538 |
case WM8750_IFACE: /* Digital Audio Interface Format */ |
539 |
s->format = value; |
540 |
s->master = (value >> 6) & 1; /* MS */ |
541 |
wm8750_clk_update(s, s->master); |
542 |
break;
|
543 |
|
544 |
case WM8750_SRATE: /* Clocking and Sample Rate Control */ |
545 |
s->rate = &wm_rate_table[(value >> 1) & 0x1f]; |
546 |
wm8750_clk_update(s, 0);
|
547 |
break;
|
548 |
|
549 |
case WM8750_RESET: /* Reset */ |
550 |
wm8750_reset(&s->i2c); |
551 |
break;
|
552 |
|
553 |
#ifdef VERBOSE
|
554 |
default:
|
555 |
printf("%s: unknown register %02x\n", __FUNCTION__, cmd);
|
556 |
#endif
|
557 |
} |
558 |
|
559 |
return 0; |
560 |
} |
561 |
|
562 |
static int wm8750_rx(i2c_slave *i2c) |
563 |
{ |
564 |
return 0x00; |
565 |
} |
566 |
|
567 |
static void wm8750_save(QEMUFile *f, void *opaque) |
568 |
{ |
569 |
WM8750State *s = (WM8750State *) opaque; |
570 |
int i;
|
571 |
qemu_put_8s(f, &s->i2c_data[0]);
|
572 |
qemu_put_8s(f, &s->i2c_data[1]);
|
573 |
qemu_put_be32(f, s->i2c_len); |
574 |
qemu_put_be32(f, s->enable); |
575 |
qemu_put_be32(f, s->idx_in); |
576 |
qemu_put_be32(f, s->req_in); |
577 |
qemu_put_be32(f, s->idx_out); |
578 |
qemu_put_be32(f, s->req_out); |
579 |
|
580 |
for (i = 0; i < 7; i ++) |
581 |
qemu_put_8s(f, &s->outvol[i]); |
582 |
for (i = 0; i < 2; i ++) |
583 |
qemu_put_8s(f, &s->outmute[i]); |
584 |
for (i = 0; i < 4; i ++) |
585 |
qemu_put_8s(f, &s->invol[i]); |
586 |
for (i = 0; i < 2; i ++) |
587 |
qemu_put_8s(f, &s->inmute[i]); |
588 |
|
589 |
for (i = 0; i < 2; i ++) |
590 |
qemu_put_8s(f, &s->diff[i]); |
591 |
qemu_put_8s(f, &s->pol); |
592 |
qemu_put_8s(f, &s->ds); |
593 |
for (i = 0; i < 2; i ++) |
594 |
qemu_put_8s(f, &s->monomix[i]); |
595 |
qemu_put_8s(f, &s->alc); |
596 |
qemu_put_8s(f, &s->mute); |
597 |
for (i = 0; i < 4; i ++) |
598 |
qemu_put_8s(f, &s->path[i]); |
599 |
for (i = 0; i < 2; i ++) |
600 |
qemu_put_8s(f, &s->mpath[i]); |
601 |
qemu_put_8s(f, &s->format); |
602 |
qemu_put_8s(f, &s->power); |
603 |
qemu_put_byte(f, (s->rate - wm_rate_table) / sizeof(*s->rate));
|
604 |
i2c_slave_save(f, &s->i2c); |
605 |
} |
606 |
|
607 |
static int wm8750_load(QEMUFile *f, void *opaque, int version_id) |
608 |
{ |
609 |
WM8750State *s = (WM8750State *) opaque; |
610 |
int i;
|
611 |
qemu_get_8s(f, &s->i2c_data[0]);
|
612 |
qemu_get_8s(f, &s->i2c_data[1]);
|
613 |
s->i2c_len = qemu_get_be32(f); |
614 |
s->enable = qemu_get_be32(f); |
615 |
s->idx_in = qemu_get_be32(f); |
616 |
s->req_in = qemu_get_be32(f); |
617 |
s->idx_out = qemu_get_be32(f); |
618 |
s->req_out = qemu_get_be32(f); |
619 |
|
620 |
for (i = 0; i < 7; i ++) |
621 |
qemu_get_8s(f, &s->outvol[i]); |
622 |
for (i = 0; i < 2; i ++) |
623 |
qemu_get_8s(f, &s->outmute[i]); |
624 |
for (i = 0; i < 4; i ++) |
625 |
qemu_get_8s(f, &s->invol[i]); |
626 |
for (i = 0; i < 2; i ++) |
627 |
qemu_get_8s(f, &s->inmute[i]); |
628 |
|
629 |
for (i = 0; i < 2; i ++) |
630 |
qemu_get_8s(f, &s->diff[i]); |
631 |
qemu_get_8s(f, &s->pol); |
632 |
qemu_get_8s(f, &s->ds); |
633 |
for (i = 0; i < 2; i ++) |
634 |
qemu_get_8s(f, &s->monomix[i]); |
635 |
qemu_get_8s(f, &s->alc); |
636 |
qemu_get_8s(f, &s->mute); |
637 |
for (i = 0; i < 4; i ++) |
638 |
qemu_get_8s(f, &s->path[i]); |
639 |
for (i = 0; i < 2; i ++) |
640 |
qemu_get_8s(f, &s->mpath[i]); |
641 |
qemu_get_8s(f, &s->format); |
642 |
qemu_get_8s(f, &s->power); |
643 |
s->rate = &wm_rate_table[(uint8_t) qemu_get_byte(f) & 0x1f];
|
644 |
i2c_slave_load(f, &s->i2c); |
645 |
return 0; |
646 |
} |
647 |
|
648 |
static void wm8750_init(i2c_slave *i2c) |
649 |
{ |
650 |
WM8750State *s = FROM_I2C_SLAVE(WM8750State, i2c); |
651 |
|
652 |
AUD_register_card(CODEC, &s->card); |
653 |
wm8750_reset(&s->i2c); |
654 |
|
655 |
register_savevm(CODEC, -1, 0, wm8750_save, wm8750_load, s); |
656 |
} |
657 |
|
658 |
#if 0
|
659 |
static void wm8750_fini(i2c_slave *i2c)
|
660 |
{
|
661 |
WM8750State *s = (WM8750State *) i2c;
|
662 |
wm8750_reset(&s->i2c);
|
663 |
AUD_remove_card(&s->card);
|
664 |
qemu_free(s);
|
665 |
}
|
666 |
#endif
|
667 |
|
668 |
void wm8750_data_req_set(DeviceState *dev,
|
669 |
void (*data_req)(void *, int, int), void *opaque) |
670 |
{ |
671 |
WM8750State *s = FROM_I2C_SLAVE(WM8750State, I2C_SLAVE_FROM_QDEV(dev)); |
672 |
s->data_req = data_req; |
673 |
s->opaque = opaque; |
674 |
} |
675 |
|
676 |
void wm8750_dac_dat(void *opaque, uint32_t sample) |
677 |
{ |
678 |
WM8750State *s = (WM8750State *) opaque; |
679 |
|
680 |
*(uint32_t *) &s->data_out[s->idx_out] = sample; |
681 |
s->req_out -= 4;
|
682 |
s->idx_out += 4;
|
683 |
if (s->idx_out >= sizeof(s->data_out) || s->req_out <= 0) |
684 |
wm8750_out_flush(s); |
685 |
} |
686 |
|
687 |
void *wm8750_dac_buffer(void *opaque, int samples) |
688 |
{ |
689 |
WM8750State *s = (WM8750State *) opaque; |
690 |
/* XXX: Should check if there are <i>samples</i> free samples available */
|
691 |
void *ret = s->data_out + s->idx_out;
|
692 |
|
693 |
s->idx_out += samples << 2;
|
694 |
s->req_out -= samples << 2;
|
695 |
return ret;
|
696 |
} |
697 |
|
698 |
void wm8750_dac_commit(void *opaque) |
699 |
{ |
700 |
WM8750State *s = (WM8750State *) opaque; |
701 |
|
702 |
wm8750_out_flush(s); |
703 |
} |
704 |
|
705 |
uint32_t wm8750_adc_dat(void *opaque)
|
706 |
{ |
707 |
WM8750State *s = (WM8750State *) opaque; |
708 |
uint32_t *data; |
709 |
|
710 |
if (s->idx_in >= sizeof(s->data_in)) |
711 |
wm8750_in_load(s); |
712 |
|
713 |
data = (uint32_t *) &s->data_in[s->idx_in]; |
714 |
s->req_in -= 4;
|
715 |
s->idx_in += 4;
|
716 |
return *data;
|
717 |
} |
718 |
|
719 |
void wm8750_set_bclk_in(void *opaque, int new_hz) |
720 |
{ |
721 |
WM8750State *s = (WM8750State *) opaque; |
722 |
|
723 |
s->ext_adc_hz = new_hz; |
724 |
s->ext_dac_hz = new_hz; |
725 |
wm8750_clk_update(s, 1);
|
726 |
} |
727 |
|
728 |
static I2CSlaveInfo wm8750_info = {
|
729 |
.qdev.name = "wm8750",
|
730 |
.qdev.size = sizeof(WM8750State),
|
731 |
.init = wm8750_init, |
732 |
.event = wm8750_event, |
733 |
.recv = wm8750_rx, |
734 |
.send = wm8750_tx |
735 |
}; |
736 |
|
737 |
static void wm8750_register_devices(void) |
738 |
{ |
739 |
i2c_register_slave(&wm8750_info); |
740 |
} |
741 |
|
742 |
device_init(wm8750_register_devices) |