root / hw / pl061.c @ 67f0875e
History | View | Annotate | Download (7.7 kB)
1 |
/*
|
---|---|
2 |
* Arm PrimeCell PL061 General Purpose IO with additional
|
3 |
* Luminary Micro Stellaris bits.
|
4 |
*
|
5 |
* Copyright (c) 2007 CodeSourcery.
|
6 |
* Written by Paul Brook
|
7 |
*
|
8 |
* This code is licenced under the GPL.
|
9 |
*/
|
10 |
|
11 |
#include "sysbus.h" |
12 |
|
13 |
//#define DEBUG_PL061 1
|
14 |
|
15 |
#ifdef DEBUG_PL061
|
16 |
#define DPRINTF(fmt, ...) \
|
17 |
do { printf("pl061: " fmt , ## __VA_ARGS__); } while (0) |
18 |
#define BADF(fmt, ...) \
|
19 |
do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) |
20 |
#else
|
21 |
#define DPRINTF(fmt, ...) do {} while(0) |
22 |
#define BADF(fmt, ...) \
|
23 |
do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__);} while (0) |
24 |
#endif
|
25 |
|
26 |
static const uint8_t pl061_id[12] = |
27 |
{ 0x00, 0x00, 0x00, 0x00, 0x61, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 }; |
28 |
|
29 |
typedef struct { |
30 |
SysBusDevice busdev; |
31 |
int locked;
|
32 |
uint8_t data; |
33 |
uint8_t old_data; |
34 |
uint8_t dir; |
35 |
uint8_t isense; |
36 |
uint8_t ibe; |
37 |
uint8_t iev; |
38 |
uint8_t im; |
39 |
uint8_t istate; |
40 |
uint8_t afsel; |
41 |
uint8_t dr2r; |
42 |
uint8_t dr4r; |
43 |
uint8_t dr8r; |
44 |
uint8_t odr; |
45 |
uint8_t pur; |
46 |
uint8_t pdr; |
47 |
uint8_t slr; |
48 |
uint8_t den; |
49 |
uint8_t cr; |
50 |
uint8_t float_high; |
51 |
qemu_irq irq; |
52 |
qemu_irq out[8];
|
53 |
} pl061_state; |
54 |
|
55 |
static void pl061_update(pl061_state *s) |
56 |
{ |
57 |
uint8_t changed; |
58 |
uint8_t mask; |
59 |
uint8_t out; |
60 |
int i;
|
61 |
|
62 |
/* Outputs float high. */
|
63 |
/* FIXME: This is board dependent. */
|
64 |
out = (s->data & s->dir) | ~s->dir; |
65 |
changed = s->old_data ^ out; |
66 |
if (!changed)
|
67 |
return;
|
68 |
|
69 |
s->old_data = out; |
70 |
for (i = 0; i < 8; i++) { |
71 |
mask = 1 << i;
|
72 |
if ((changed & mask) && s->out) {
|
73 |
DPRINTF("Set output %d = %d\n", i, (out & mask) != 0); |
74 |
qemu_set_irq(s->out[i], (out & mask) != 0);
|
75 |
} |
76 |
} |
77 |
|
78 |
/* FIXME: Implement input interrupts. */
|
79 |
} |
80 |
|
81 |
static uint32_t pl061_read(void *opaque, target_phys_addr_t offset) |
82 |
{ |
83 |
pl061_state *s = (pl061_state *)opaque; |
84 |
|
85 |
if (offset >= 0xfd0 && offset < 0x1000) { |
86 |
return pl061_id[(offset - 0xfd0) >> 2]; |
87 |
} |
88 |
if (offset < 0x400) { |
89 |
return s->data & (offset >> 2); |
90 |
} |
91 |
switch (offset) {
|
92 |
case 0x400: /* Direction */ |
93 |
return s->dir;
|
94 |
case 0x404: /* Interrupt sense */ |
95 |
return s->isense;
|
96 |
case 0x408: /* Interrupt both edges */ |
97 |
return s->ibe;
|
98 |
case 0x40c: /* Interupt event */ |
99 |
return s->iev;
|
100 |
case 0x410: /* Interrupt mask */ |
101 |
return s->im;
|
102 |
case 0x414: /* Raw interrupt status */ |
103 |
return s->istate;
|
104 |
case 0x418: /* Masked interrupt status */ |
105 |
return s->istate | s->im;
|
106 |
case 0x420: /* Alternate function select */ |
107 |
return s->afsel;
|
108 |
case 0x500: /* 2mA drive */ |
109 |
return s->dr2r;
|
110 |
case 0x504: /* 4mA drive */ |
111 |
return s->dr4r;
|
112 |
case 0x508: /* 8mA drive */ |
113 |
return s->dr8r;
|
114 |
case 0x50c: /* Open drain */ |
115 |
return s->odr;
|
116 |
case 0x510: /* Pull-up */ |
117 |
return s->pur;
|
118 |
case 0x514: /* Pull-down */ |
119 |
return s->pdr;
|
120 |
case 0x518: /* Slew rate control */ |
121 |
return s->slr;
|
122 |
case 0x51c: /* Digital enable */ |
123 |
return s->den;
|
124 |
case 0x520: /* Lock */ |
125 |
return s->locked;
|
126 |
case 0x524: /* Commit */ |
127 |
return s->cr;
|
128 |
default:
|
129 |
hw_error("pl061_read: Bad offset %x\n", (int)offset); |
130 |
return 0; |
131 |
} |
132 |
} |
133 |
|
134 |
static void pl061_write(void *opaque, target_phys_addr_t offset, |
135 |
uint32_t value) |
136 |
{ |
137 |
pl061_state *s = (pl061_state *)opaque; |
138 |
uint8_t mask; |
139 |
|
140 |
if (offset < 0x400) { |
141 |
mask = (offset >> 2) & s->dir;
|
142 |
s->data = (s->data & ~mask) | (value & mask); |
143 |
pl061_update(s); |
144 |
return;
|
145 |
} |
146 |
switch (offset) {
|
147 |
case 0x400: /* Direction */ |
148 |
s->dir = value; |
149 |
break;
|
150 |
case 0x404: /* Interrupt sense */ |
151 |
s->isense = value; |
152 |
break;
|
153 |
case 0x408: /* Interrupt both edges */ |
154 |
s->ibe = value; |
155 |
break;
|
156 |
case 0x40c: /* Interupt event */ |
157 |
s->iev = value; |
158 |
break;
|
159 |
case 0x410: /* Interrupt mask */ |
160 |
s->im = value; |
161 |
break;
|
162 |
case 0x41c: /* Interrupt clear */ |
163 |
s->istate &= ~value; |
164 |
break;
|
165 |
case 0x420: /* Alternate function select */ |
166 |
mask = s->cr; |
167 |
s->afsel = (s->afsel & ~mask) | (value & mask); |
168 |
break;
|
169 |
case 0x500: /* 2mA drive */ |
170 |
s->dr2r = value; |
171 |
break;
|
172 |
case 0x504: /* 4mA drive */ |
173 |
s->dr4r = value; |
174 |
break;
|
175 |
case 0x508: /* 8mA drive */ |
176 |
s->dr8r = value; |
177 |
break;
|
178 |
case 0x50c: /* Open drain */ |
179 |
s->odr = value; |
180 |
break;
|
181 |
case 0x510: /* Pull-up */ |
182 |
s->pur = value; |
183 |
break;
|
184 |
case 0x514: /* Pull-down */ |
185 |
s->pdr = value; |
186 |
break;
|
187 |
case 0x518: /* Slew rate control */ |
188 |
s->slr = value; |
189 |
break;
|
190 |
case 0x51c: /* Digital enable */ |
191 |
s->den = value; |
192 |
break;
|
193 |
case 0x520: /* Lock */ |
194 |
s->locked = (value != 0xacce551);
|
195 |
break;
|
196 |
case 0x524: /* Commit */ |
197 |
if (!s->locked)
|
198 |
s->cr = value; |
199 |
break;
|
200 |
default:
|
201 |
hw_error("pl061_write: Bad offset %x\n", (int)offset); |
202 |
} |
203 |
pl061_update(s); |
204 |
} |
205 |
|
206 |
static void pl061_reset(pl061_state *s) |
207 |
{ |
208 |
s->locked = 1;
|
209 |
s->cr = 0xff;
|
210 |
} |
211 |
|
212 |
static void pl061_set_irq(void * opaque, int irq, int level) |
213 |
{ |
214 |
pl061_state *s = (pl061_state *)opaque; |
215 |
uint8_t mask; |
216 |
|
217 |
mask = 1 << irq;
|
218 |
if ((s->dir & mask) == 0) { |
219 |
s->data &= ~mask; |
220 |
if (level)
|
221 |
s->data |= mask; |
222 |
pl061_update(s); |
223 |
} |
224 |
} |
225 |
|
226 |
static CPUReadMemoryFunc * const pl061_readfn[] = { |
227 |
pl061_read, |
228 |
pl061_read, |
229 |
pl061_read |
230 |
}; |
231 |
|
232 |
static CPUWriteMemoryFunc * const pl061_writefn[] = { |
233 |
pl061_write, |
234 |
pl061_write, |
235 |
pl061_write |
236 |
}; |
237 |
|
238 |
static void pl061_save(QEMUFile *f, void *opaque) |
239 |
{ |
240 |
pl061_state *s = (pl061_state *)opaque; |
241 |
|
242 |
qemu_put_be32(f, s->locked); |
243 |
qemu_put_be32(f, s->data); |
244 |
qemu_put_be32(f, s->old_data); |
245 |
qemu_put_be32(f, s->dir); |
246 |
qemu_put_be32(f, s->isense); |
247 |
qemu_put_be32(f, s->ibe); |
248 |
qemu_put_be32(f, s->iev); |
249 |
qemu_put_be32(f, s->im); |
250 |
qemu_put_be32(f, s->istate); |
251 |
qemu_put_be32(f, s->afsel); |
252 |
qemu_put_be32(f, s->dr2r); |
253 |
qemu_put_be32(f, s->dr4r); |
254 |
qemu_put_be32(f, s->dr8r); |
255 |
qemu_put_be32(f, s->odr); |
256 |
qemu_put_be32(f, s->pur); |
257 |
qemu_put_be32(f, s->pdr); |
258 |
qemu_put_be32(f, s->slr); |
259 |
qemu_put_be32(f, s->den); |
260 |
qemu_put_be32(f, s->cr); |
261 |
qemu_put_be32(f, s->float_high); |
262 |
} |
263 |
|
264 |
static int pl061_load(QEMUFile *f, void *opaque, int version_id) |
265 |
{ |
266 |
pl061_state *s = (pl061_state *)opaque; |
267 |
if (version_id != 1) |
268 |
return -EINVAL;
|
269 |
|
270 |
s->locked = qemu_get_be32(f); |
271 |
s->data = qemu_get_be32(f); |
272 |
s->old_data = qemu_get_be32(f); |
273 |
s->dir = qemu_get_be32(f); |
274 |
s->isense = qemu_get_be32(f); |
275 |
s->ibe = qemu_get_be32(f); |
276 |
s->iev = qemu_get_be32(f); |
277 |
s->im = qemu_get_be32(f); |
278 |
s->istate = qemu_get_be32(f); |
279 |
s->afsel = qemu_get_be32(f); |
280 |
s->dr2r = qemu_get_be32(f); |
281 |
s->dr4r = qemu_get_be32(f); |
282 |
s->dr8r = qemu_get_be32(f); |
283 |
s->odr = qemu_get_be32(f); |
284 |
s->pur = qemu_get_be32(f); |
285 |
s->pdr = qemu_get_be32(f); |
286 |
s->slr = qemu_get_be32(f); |
287 |
s->den = qemu_get_be32(f); |
288 |
s->cr = qemu_get_be32(f); |
289 |
s->float_high = qemu_get_be32(f); |
290 |
|
291 |
return 0; |
292 |
} |
293 |
|
294 |
static int pl061_init(SysBusDevice *dev) |
295 |
{ |
296 |
int iomemtype;
|
297 |
pl061_state *s = FROM_SYSBUS(pl061_state, dev); |
298 |
|
299 |
iomemtype = cpu_register_io_memory(pl061_readfn, |
300 |
pl061_writefn, s); |
301 |
sysbus_init_mmio(dev, 0x1000, iomemtype);
|
302 |
sysbus_init_irq(dev, &s->irq); |
303 |
qdev_init_gpio_in(&dev->qdev, pl061_set_irq, 8);
|
304 |
qdev_init_gpio_out(&dev->qdev, s->out, 8);
|
305 |
pl061_reset(s); |
306 |
register_savevm("pl061_gpio", -1, 1, pl061_save, pl061_load, s); |
307 |
return 0; |
308 |
} |
309 |
|
310 |
static void pl061_register_devices(void) |
311 |
{ |
312 |
sysbus_register_dev("pl061", sizeof(pl061_state), |
313 |
pl061_init); |
314 |
} |
315 |
|
316 |
device_init(pl061_register_devices) |