Archipelago » qemu

/*

 * ARM RealView Baseboard System emulation.

 *

 * Copyright (c) 2006-2007 CodeSourcery.

 * Written by Paul Brook

 *

 * This code is licensed under the GPL.

 */

#include "sysbus.h"

#include "arm-misc.h"

#include "primecell.h"

#include "devices.h"

#include "pci/pci.h"

#include "net/net.h"

#include "sysemu/sysemu.h"

#include "boards.h"

#include "i2c.h"

#include "sysemu/blockdev.h"

#include "exec/address-spaces.h"

#define SMP_BOOT_ADDR 0xe0000000

#define SMP_BOOTREG_ADDR 0x10000030

/* Board init.  */

static struct arm_boot_info realview_binfo = {

    .smp_loader_start = SMP_BOOT_ADDR,

    .smp_bootreg_addr = SMP_BOOTREG_ADDR,

};

/* The following two lists must be consistent.  */

enum realview_board_type {

    BOARD_EB,

    BOARD_EB_MPCORE,

    BOARD_PB_A8,

    BOARD_PBX_A9,

};

static const int realview_board_id[] = {

    0x33b,

    0x33b,

    0x769,

    0x76d

};

static void realview_init(QEMUMachineInitArgs *args,

                          enum realview_board_type board_type)

{

    ARMCPU *cpu = NULL;

    CPUARMState *env;

    MemoryRegion *sysmem = get_system_memory();

    MemoryRegion *ram_lo = g_new(MemoryRegion, 1);

    MemoryRegion *ram_hi = g_new(MemoryRegion, 1);

    MemoryRegion *ram_alias = g_new(MemoryRegion, 1);

    MemoryRegion *ram_hack = g_new(MemoryRegion, 1);

    DeviceState *dev, *sysctl, *gpio2, *pl041;

    SysBusDevice *busdev;

    qemu_irq *irqp;

    qemu_irq pic[64];

    qemu_irq mmc_irq[2];

    PCIBus *pci_bus;

    NICInfo *nd;

    i2c_bus *i2c;

    int n;

    int done_nic = 0;

    qemu_irq cpu_irq[4];

    int is_mpcore = 0;

    int is_pb = 0;

    uint32_t proc_id = 0;

    uint32_t sys_id;

    ram_addr_t low_ram_size;

    ram_addr_t ram_size = args->ram_size;

    switch (board_type) {

    case BOARD_EB:

        break;

    case BOARD_EB_MPCORE:

        is_mpcore = 1;

        break;

    case BOARD_PB_A8:

        is_pb = 1;

        break;

    case BOARD_PBX_A9:

        is_mpcore = 1;

        is_pb = 1;

        break;

    }

    for (n = 0; n < smp_cpus; n++) {

        cpu = cpu_arm_init(args->cpu_model);

        if (!cpu) {

            fprintf(stderr, "Unable to find CPU definition\n");

            exit(1);

        }

        irqp = arm_pic_init_cpu(cpu);

        cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];

    }

    env = &cpu->env;

    if (arm_feature(env, ARM_FEATURE_V7)) {

        if (is_mpcore) {

            proc_id = 0x0c000000;

        } else {

            proc_id = 0x0e000000;

        }

    } else if (arm_feature(env, ARM_FEATURE_V6K)) {

        proc_id = 0x06000000;

    } else if (arm_feature(env, ARM_FEATURE_V6)) {

        proc_id = 0x04000000;

    } else {

        proc_id = 0x02000000;

    }

    if (is_pb && ram_size > 0x20000000) {

        /* Core tile RAM.  */

        low_ram_size = ram_size - 0x20000000;

        ram_size = 0x20000000;

        memory_region_init_ram(ram_lo, "realview.lowmem", low_ram_size);

        vmstate_register_ram_global(ram_lo);

        memory_region_add_subregion(sysmem, 0x20000000, ram_lo);

    }

    memory_region_init_ram(ram_hi, "realview.highmem", ram_size);

    vmstate_register_ram_global(ram_hi);

    low_ram_size = ram_size;

    if (low_ram_size > 0x10000000)

      low_ram_size = 0x10000000;

    /* SDRAM at address zero.  */

    memory_region_init_alias(ram_alias, "realview.alias",

                             ram_hi, 0, low_ram_size);

    memory_region_add_subregion(sysmem, 0, ram_alias);

    if (is_pb) {

        /* And again at a high address.  */

        memory_region_add_subregion(sysmem, 0x70000000, ram_hi);

    } else {

        ram_size = low_ram_size;

    }

    sys_id = is_pb ? 0x01780500 : 0xc1400400;

    sysctl = qdev_create(NULL, "realview_sysctl");

    qdev_prop_set_uint32(sysctl, "sys_id", sys_id);

    qdev_prop_set_uint32(sysctl, "proc_id", proc_id);

    qdev_init_nofail(sysctl);

    sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000);

    if (is_mpcore) {

        hwaddr periphbase;

        dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");

        qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);

        qdev_init_nofail(dev);

        busdev = SYS_BUS_DEVICE(dev);

        if (is_pb) {

            periphbase = 0x1f000000;

        } else {

            periphbase = 0x10100000;

        }

        sysbus_mmio_map(busdev, 0, periphbase);

        for (n = 0; n < smp_cpus; n++) {

            sysbus_connect_irq(busdev, n, cpu_irq[n]);

        }

        sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);

        /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */

        realview_binfo.gic_cpu_if_addr = periphbase + 0x100;

    } else {

        uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;

        /* For now just create the nIRQ GIC, and ignore the others.  */

        dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);

    }

    for (n = 0; n < 64; n++) {

        pic[n] = qdev_get_gpio_in(dev, n);

    }

    pl041 = qdev_create(NULL, "pl041");

    qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);

    qdev_init_nofail(pl041);

    sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000);

    sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]);

    sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);

    sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);

    sysbus_create_simple("pl011", 0x10009000, pic[12]);

    sysbus_create_simple("pl011", 0x1000a000, pic[13]);

    sysbus_create_simple("pl011", 0x1000b000, pic[14]);

    sysbus_create_simple("pl011", 0x1000c000, pic[15]);

    /* DMA controller is optional, apparently.  */

    sysbus_create_simple("pl081", 0x10030000, pic[24]);

    sysbus_create_simple("sp804", 0x10011000, pic[4]);

    sysbus_create_simple("sp804", 0x10012000, pic[5]);

    sysbus_create_simple("pl061", 0x10013000, pic[6]);

    sysbus_create_simple("pl061", 0x10014000, pic[7]);

    gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);

    sysbus_create_simple("pl111", 0x10020000, pic[23]);

    dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);

    /* Wire up MMC card detect and read-only signals. These have

     * to go to both the PL061 GPIO and the sysctl register.

     * Note that the PL181 orders these lines (readonly,inserted)

     * and the PL061 has them the other way about. Also the card

     * detect line is inverted.

     */

    mmc_irq[0] = qemu_irq_split(

        qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),

        qdev_get_gpio_in(gpio2, 1));

    mmc_irq[1] = qemu_irq_split(

        qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),

        qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));

    qdev_connect_gpio_out(dev, 0, mmc_irq[0]);

    qdev_connect_gpio_out(dev, 1, mmc_irq[1]);

    sysbus_create_simple("pl031", 0x10017000, pic[10]);

    if (!is_pb) {

        dev = qdev_create(NULL, "realview_pci");

        busdev = SYS_BUS_DEVICE(dev);

        qdev_init_nofail(dev);

        sysbus_mmio_map(busdev, 0, 0x61000000); /* PCI self-config */

        sysbus_mmio_map(busdev, 1, 0x62000000); /* PCI config */

        sysbus_mmio_map(busdev, 2, 0x63000000); /* PCI I/O */

        sysbus_connect_irq(busdev, 0, pic[48]);

        sysbus_connect_irq(busdev, 1, pic[49]);

        sysbus_connect_irq(busdev, 2, pic[50]);

        sysbus_connect_irq(busdev, 3, pic[51]);

        pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");

        if (usb_enabled(false)) {

            pci_create_simple(pci_bus, -1, "pci-ohci");

        }

        n = drive_get_max_bus(IF_SCSI);

        while (n >= 0) {

            pci_create_simple(pci_bus, -1, "lsi53c895a");

            n--;

        }

    }

    for(n = 0; n < nb_nics; n++) {

        nd = &nd_table[n];

        if (!done_nic && (!nd->model ||

                    strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {

            if (is_pb) {

                lan9118_init(nd, 0x4e000000, pic[28]);

            } else {

                smc91c111_init(nd, 0x4e000000, pic[28]);

            }

            done_nic = 1;

        } else {

            pci_nic_init_nofail(nd, "rtl8139", NULL);

        }

    }

    dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);

    i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");

    i2c_create_slave(i2c, "ds1338", 0x68);

    /* Memory map for RealView Emulation Baseboard:  */

    /* 0x10000000 System registers.  */

    /*  0x10001000 System controller.  */

    /* 0x10002000 Two-Wire Serial Bus.  */

    /* 0x10003000 Reserved.  */

    /*  0x10004000 AACI.  */

    /*  0x10005000 MCI.  */

    /* 0x10006000 KMI0.  */

    /* 0x10007000 KMI1.  */

    /*  0x10008000 Character LCD. (EB) */

    /* 0x10009000 UART0.  */

    /* 0x1000a000 UART1.  */

    /* 0x1000b000 UART2.  */

    /* 0x1000c000 UART3.  */

    /*  0x1000d000 SSPI.  */

    /*  0x1000e000 SCI.  */

    /* 0x1000f000 Reserved.  */

    /*  0x10010000 Watchdog.  */

    /* 0x10011000 Timer 0+1.  */

    /* 0x10012000 Timer 2+3.  */

    /*  0x10013000 GPIO 0.  */

    /*  0x10014000 GPIO 1.  */

    /*  0x10015000 GPIO 2.  */

    /*  0x10002000 Two-Wire Serial Bus - DVI. (PB) */

    /* 0x10017000 RTC.  */

    /*  0x10018000 DMC.  */

    /*  0x10019000 PCI controller config.  */

    /*  0x10020000 CLCD.  */

    /* 0x10030000 DMA Controller.  */

    /* 0x10040000 GIC1. (EB) */

    /*  0x10050000 GIC2. (EB) */

    /*  0x10060000 GIC3. (EB) */

    /*  0x10070000 GIC4. (EB) */

    /*  0x10080000 SMC.  */

    /* 0x1e000000 GIC1. (PB) */

    /*  0x1e001000 GIC2. (PB) */

    /*  0x1e002000 GIC3. (PB) */

    /*  0x1e003000 GIC4. (PB) */

    /*  0x40000000 NOR flash.  */

    /*  0x44000000 DoC flash.  */

    /*  0x48000000 SRAM.  */

    /*  0x4c000000 Configuration flash.  */

    /* 0x4e000000 Ethernet.  */

    /*  0x4f000000 USB.  */

    /*  0x50000000 PISMO.  */

    /*  0x54000000 PISMO.  */

    /*  0x58000000 PISMO.  */

    /*  0x5c000000 PISMO.  */

    /* 0x60000000 PCI.  */

    /* 0x61000000 PCI Self Config.  */

    /* 0x62000000 PCI Config.  */

    /* 0x63000000 PCI IO.  */

    /* 0x64000000 PCI mem 0.  */

    /* 0x68000000 PCI mem 1.  */

    /* 0x6c000000 PCI mem 2.  */

    /* ??? Hack to map an additional page of ram for the secondary CPU

       startup code.  I guess this works on real hardware because the

       BootROM happens to be in ROM/flash or in memory that isn't clobbered

       until after Linux boots the secondary CPUs.  */

    memory_region_init_ram(ram_hack, "realview.hack", 0x1000);

    vmstate_register_ram_global(ram_hack);

    memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack);

    realview_binfo.ram_size = ram_size;

    realview_binfo.kernel_filename = args->kernel_filename;

    realview_binfo.kernel_cmdline = args->kernel_cmdline;

    realview_binfo.initrd_filename = args->initrd_filename;

    realview_binfo.nb_cpus = smp_cpus;

    realview_binfo.board_id = realview_board_id[board_type];

    realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);

    arm_load_kernel(arm_env_get_cpu(first_cpu), &realview_binfo);

}

static void realview_eb_init(QEMUMachineInitArgs *args)

{

    if (!args->cpu_model) {

        args->cpu_model = "arm926";

    }

    realview_init(args, BOARD_EB);

}

static void realview_eb_mpcore_init(QEMUMachineInitArgs *args)

{

    if (!args->cpu_model) {

        args->cpu_model = "arm11mpcore";

    }

    realview_init(args, BOARD_EB_MPCORE);

}

static void realview_pb_a8_init(QEMUMachineInitArgs *args)

{

    if (!args->cpu_model) {

        args->cpu_model = "cortex-a8";

    }

    realview_init(args, BOARD_PB_A8);

}

static void realview_pbx_a9_init(QEMUMachineInitArgs *args)

{

    if (!args->cpu_model) {

        args->cpu_model = "cortex-a9";

    }

    realview_init(args, BOARD_PBX_A9);

}

static QEMUMachine realview_eb_machine = {

    .name = "realview-eb",

    .desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)",

    .init = realview_eb_init,

    .block_default_type = IF_SCSI,

    DEFAULT_MACHINE_OPTIONS,

};

static QEMUMachine realview_eb_mpcore_machine = {

    .name = "realview-eb-mpcore",

    .desc = "ARM RealView Emulation Baseboard (ARM11MPCore)",

    .init = realview_eb_mpcore_init,

    .block_default_type = IF_SCSI,

    .max_cpus = 4,

    DEFAULT_MACHINE_OPTIONS,

};

static QEMUMachine realview_pb_a8_machine = {

    .name = "realview-pb-a8",

    .desc = "ARM RealView Platform Baseboard for Cortex-A8",

    .init = realview_pb_a8_init,

    DEFAULT_MACHINE_OPTIONS,

};

static QEMUMachine realview_pbx_a9_machine = {

    .name = "realview-pbx-a9",

    .desc = "ARM RealView Platform Baseboard Explore for Cortex-A9",

    .init = realview_pbx_a9_init,

    .block_default_type = IF_SCSI,

    .max_cpus = 4,

    DEFAULT_MACHINE_OPTIONS,

};

static void realview_machine_init(void)

{

    qemu_register_machine(&realview_eb_machine);

    qemu_register_machine(&realview_eb_mpcore_machine);

    qemu_register_machine(&realview_pb_a8_machine);

    qemu_register_machine(&realview_pbx_a9_machine);

}

machine_init(realview_machine_init);