root / hw / pl011.c @ 7e0a9247
History | View | Annotate | Download (8.4 kB)
1 |
/*
|
---|---|
2 |
* Arm PrimeCell PL011 UART
|
3 |
*
|
4 |
* Copyright (c) 2006 CodeSourcery.
|
5 |
* Written by Paul Brook
|
6 |
*
|
7 |
* This code is licensed under the GPL.
|
8 |
*/
|
9 |
|
10 |
#include "sysbus.h" |
11 |
#include "qemu-char.h" |
12 |
|
13 |
typedef struct { |
14 |
SysBusDevice busdev; |
15 |
MemoryRegion iomem; |
16 |
uint32_t readbuff; |
17 |
uint32_t flags; |
18 |
uint32_t lcr; |
19 |
uint32_t cr; |
20 |
uint32_t dmacr; |
21 |
uint32_t int_enabled; |
22 |
uint32_t int_level; |
23 |
uint32_t read_fifo[16];
|
24 |
uint32_t ilpr; |
25 |
uint32_t ibrd; |
26 |
uint32_t fbrd; |
27 |
uint32_t ifl; |
28 |
int read_pos;
|
29 |
int read_count;
|
30 |
int read_trigger;
|
31 |
CharDriverState *chr; |
32 |
qemu_irq irq; |
33 |
const unsigned char *id; |
34 |
} pl011_state; |
35 |
|
36 |
#define PL011_INT_TX 0x20 |
37 |
#define PL011_INT_RX 0x10 |
38 |
|
39 |
#define PL011_FLAG_TXFE 0x80 |
40 |
#define PL011_FLAG_RXFF 0x40 |
41 |
#define PL011_FLAG_TXFF 0x20 |
42 |
#define PL011_FLAG_RXFE 0x10 |
43 |
|
44 |
static const unsigned char pl011_id_arm[8] = |
45 |
{ 0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; |
46 |
static const unsigned char pl011_id_luminary[8] = |
47 |
{ 0x11, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 }; |
48 |
|
49 |
static void pl011_update(pl011_state *s) |
50 |
{ |
51 |
uint32_t flags; |
52 |
|
53 |
flags = s->int_level & s->int_enabled; |
54 |
qemu_set_irq(s->irq, flags != 0);
|
55 |
} |
56 |
|
57 |
static uint64_t pl011_read(void *opaque, hwaddr offset, |
58 |
unsigned size)
|
59 |
{ |
60 |
pl011_state *s = (pl011_state *)opaque; |
61 |
uint32_t c; |
62 |
|
63 |
if (offset >= 0xfe0 && offset < 0x1000) { |
64 |
return s->id[(offset - 0xfe0) >> 2]; |
65 |
} |
66 |
switch (offset >> 2) { |
67 |
case 0: /* UARTDR */ |
68 |
s->flags &= ~PL011_FLAG_RXFF; |
69 |
c = s->read_fifo[s->read_pos]; |
70 |
if (s->read_count > 0) { |
71 |
s->read_count--; |
72 |
if (++s->read_pos == 16) |
73 |
s->read_pos = 0;
|
74 |
} |
75 |
if (s->read_count == 0) { |
76 |
s->flags |= PL011_FLAG_RXFE; |
77 |
} |
78 |
if (s->read_count == s->read_trigger - 1) |
79 |
s->int_level &= ~ PL011_INT_RX; |
80 |
pl011_update(s); |
81 |
if (s->chr) {
|
82 |
qemu_chr_accept_input(s->chr); |
83 |
} |
84 |
return c;
|
85 |
case 1: /* UARTCR */ |
86 |
return 0; |
87 |
case 6: /* UARTFR */ |
88 |
return s->flags;
|
89 |
case 8: /* UARTILPR */ |
90 |
return s->ilpr;
|
91 |
case 9: /* UARTIBRD */ |
92 |
return s->ibrd;
|
93 |
case 10: /* UARTFBRD */ |
94 |
return s->fbrd;
|
95 |
case 11: /* UARTLCR_H */ |
96 |
return s->lcr;
|
97 |
case 12: /* UARTCR */ |
98 |
return s->cr;
|
99 |
case 13: /* UARTIFLS */ |
100 |
return s->ifl;
|
101 |
case 14: /* UARTIMSC */ |
102 |
return s->int_enabled;
|
103 |
case 15: /* UARTRIS */ |
104 |
return s->int_level;
|
105 |
case 16: /* UARTMIS */ |
106 |
return s->int_level & s->int_enabled;
|
107 |
case 18: /* UARTDMACR */ |
108 |
return s->dmacr;
|
109 |
default:
|
110 |
qemu_log_mask(LOG_GUEST_ERROR, |
111 |
"pl011_read: Bad offset %x\n", (int)offset); |
112 |
return 0; |
113 |
} |
114 |
} |
115 |
|
116 |
static void pl011_set_read_trigger(pl011_state *s) |
117 |
{ |
118 |
#if 0
|
119 |
/* The docs say the RX interrupt is triggered when the FIFO exceeds
|
120 |
the threshold. However linux only reads the FIFO in response to an
|
121 |
interrupt. Triggering the interrupt when the FIFO is non-empty seems
|
122 |
to make things work. */
|
123 |
if (s->lcr & 0x10)
|
124 |
s->read_trigger = (s->ifl >> 1) & 0x1c;
|
125 |
else
|
126 |
#endif
|
127 |
s->read_trigger = 1;
|
128 |
} |
129 |
|
130 |
static void pl011_write(void *opaque, hwaddr offset, |
131 |
uint64_t value, unsigned size)
|
132 |
{ |
133 |
pl011_state *s = (pl011_state *)opaque; |
134 |
unsigned char ch; |
135 |
|
136 |
switch (offset >> 2) { |
137 |
case 0: /* UARTDR */ |
138 |
/* ??? Check if transmitter is enabled. */
|
139 |
ch = value; |
140 |
if (s->chr)
|
141 |
qemu_chr_fe_write(s->chr, &ch, 1);
|
142 |
s->int_level |= PL011_INT_TX; |
143 |
pl011_update(s); |
144 |
break;
|
145 |
case 1: /* UARTCR */ |
146 |
s->cr = value; |
147 |
break;
|
148 |
case 6: /* UARTFR */ |
149 |
/* Writes to Flag register are ignored. */
|
150 |
break;
|
151 |
case 8: /* UARTUARTILPR */ |
152 |
s->ilpr = value; |
153 |
break;
|
154 |
case 9: /* UARTIBRD */ |
155 |
s->ibrd = value; |
156 |
break;
|
157 |
case 10: /* UARTFBRD */ |
158 |
s->fbrd = value; |
159 |
break;
|
160 |
case 11: /* UARTLCR_H */ |
161 |
s->lcr = value; |
162 |
pl011_set_read_trigger(s); |
163 |
break;
|
164 |
case 12: /* UARTCR */ |
165 |
/* ??? Need to implement the enable and loopback bits. */
|
166 |
s->cr = value; |
167 |
break;
|
168 |
case 13: /* UARTIFS */ |
169 |
s->ifl = value; |
170 |
pl011_set_read_trigger(s); |
171 |
break;
|
172 |
case 14: /* UARTIMSC */ |
173 |
s->int_enabled = value; |
174 |
pl011_update(s); |
175 |
break;
|
176 |
case 17: /* UARTICR */ |
177 |
s->int_level &= ~value; |
178 |
pl011_update(s); |
179 |
break;
|
180 |
case 18: /* UARTDMACR */ |
181 |
s->dmacr = value; |
182 |
if (value & 3) { |
183 |
qemu_log_mask(LOG_UNIMP, "pl011: DMA not implemented\n");
|
184 |
} |
185 |
break;
|
186 |
default:
|
187 |
qemu_log_mask(LOG_GUEST_ERROR, |
188 |
"pl011_write: Bad offset %x\n", (int)offset); |
189 |
} |
190 |
} |
191 |
|
192 |
static int pl011_can_receive(void *opaque) |
193 |
{ |
194 |
pl011_state *s = (pl011_state *)opaque; |
195 |
|
196 |
if (s->lcr & 0x10) |
197 |
return s->read_count < 16; |
198 |
else
|
199 |
return s->read_count < 1; |
200 |
} |
201 |
|
202 |
static void pl011_put_fifo(void *opaque, uint32_t value) |
203 |
{ |
204 |
pl011_state *s = (pl011_state *)opaque; |
205 |
int slot;
|
206 |
|
207 |
slot = s->read_pos + s->read_count; |
208 |
if (slot >= 16) |
209 |
slot -= 16;
|
210 |
s->read_fifo[slot] = value; |
211 |
s->read_count++; |
212 |
s->flags &= ~PL011_FLAG_RXFE; |
213 |
if (s->cr & 0x10 || s->read_count == 16) { |
214 |
s->flags |= PL011_FLAG_RXFF; |
215 |
} |
216 |
if (s->read_count == s->read_trigger) {
|
217 |
s->int_level |= PL011_INT_RX; |
218 |
pl011_update(s); |
219 |
} |
220 |
} |
221 |
|
222 |
static void pl011_receive(void *opaque, const uint8_t *buf, int size) |
223 |
{ |
224 |
pl011_put_fifo(opaque, *buf); |
225 |
} |
226 |
|
227 |
static void pl011_event(void *opaque, int event) |
228 |
{ |
229 |
if (event == CHR_EVENT_BREAK)
|
230 |
pl011_put_fifo(opaque, 0x400);
|
231 |
} |
232 |
|
233 |
static const MemoryRegionOps pl011_ops = { |
234 |
.read = pl011_read, |
235 |
.write = pl011_write, |
236 |
.endianness = DEVICE_NATIVE_ENDIAN, |
237 |
}; |
238 |
|
239 |
static const VMStateDescription vmstate_pl011 = { |
240 |
.name = "pl011",
|
241 |
.version_id = 1,
|
242 |
.minimum_version_id = 1,
|
243 |
.minimum_version_id_old = 1,
|
244 |
.fields = (VMStateField[]) { |
245 |
VMSTATE_UINT32(readbuff, pl011_state), |
246 |
VMSTATE_UINT32(flags, pl011_state), |
247 |
VMSTATE_UINT32(lcr, pl011_state), |
248 |
VMSTATE_UINT32(cr, pl011_state), |
249 |
VMSTATE_UINT32(dmacr, pl011_state), |
250 |
VMSTATE_UINT32(int_enabled, pl011_state), |
251 |
VMSTATE_UINT32(int_level, pl011_state), |
252 |
VMSTATE_UINT32_ARRAY(read_fifo, pl011_state, 16),
|
253 |
VMSTATE_UINT32(ilpr, pl011_state), |
254 |
VMSTATE_UINT32(ibrd, pl011_state), |
255 |
VMSTATE_UINT32(fbrd, pl011_state), |
256 |
VMSTATE_UINT32(ifl, pl011_state), |
257 |
VMSTATE_INT32(read_pos, pl011_state), |
258 |
VMSTATE_INT32(read_count, pl011_state), |
259 |
VMSTATE_INT32(read_trigger, pl011_state), |
260 |
VMSTATE_END_OF_LIST() |
261 |
} |
262 |
}; |
263 |
|
264 |
static int pl011_init(SysBusDevice *dev, const unsigned char *id) |
265 |
{ |
266 |
pl011_state *s = FROM_SYSBUS(pl011_state, dev); |
267 |
|
268 |
memory_region_init_io(&s->iomem, &pl011_ops, s, "pl011", 0x1000); |
269 |
sysbus_init_mmio(dev, &s->iomem); |
270 |
sysbus_init_irq(dev, &s->irq); |
271 |
s->id = id; |
272 |
s->chr = qemu_char_get_next_serial(); |
273 |
|
274 |
s->read_trigger = 1;
|
275 |
s->ifl = 0x12;
|
276 |
s->cr = 0x300;
|
277 |
s->flags = 0x90;
|
278 |
if (s->chr) {
|
279 |
qemu_chr_add_handlers(s->chr, pl011_can_receive, pl011_receive, |
280 |
pl011_event, s); |
281 |
} |
282 |
vmstate_register(&dev->qdev, -1, &vmstate_pl011, s);
|
283 |
return 0; |
284 |
} |
285 |
|
286 |
static int pl011_arm_init(SysBusDevice *dev) |
287 |
{ |
288 |
return pl011_init(dev, pl011_id_arm);
|
289 |
} |
290 |
|
291 |
static int pl011_luminary_init(SysBusDevice *dev) |
292 |
{ |
293 |
return pl011_init(dev, pl011_id_luminary);
|
294 |
} |
295 |
|
296 |
static void pl011_arm_class_init(ObjectClass *klass, void *data) |
297 |
{ |
298 |
SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass); |
299 |
|
300 |
sdc->init = pl011_arm_init; |
301 |
} |
302 |
|
303 |
static TypeInfo pl011_arm_info = {
|
304 |
.name = "pl011",
|
305 |
.parent = TYPE_SYS_BUS_DEVICE, |
306 |
.instance_size = sizeof(pl011_state),
|
307 |
.class_init = pl011_arm_class_init, |
308 |
}; |
309 |
|
310 |
static void pl011_luminary_class_init(ObjectClass *klass, void *data) |
311 |
{ |
312 |
SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass); |
313 |
|
314 |
sdc->init = pl011_luminary_init; |
315 |
} |
316 |
|
317 |
static TypeInfo pl011_luminary_info = {
|
318 |
.name = "pl011_luminary",
|
319 |
.parent = TYPE_SYS_BUS_DEVICE, |
320 |
.instance_size = sizeof(pl011_state),
|
321 |
.class_init = pl011_luminary_class_init, |
322 |
}; |
323 |
|
324 |
static void pl011_register_types(void) |
325 |
{ |
326 |
type_register_static(&pl011_arm_info); |
327 |
type_register_static(&pl011_luminary_info); |
328 |
} |
329 |
|
330 |
type_init(pl011_register_types) |