root / hw / tc6393xb.c @ 8114e9e8
History | View | Annotate | Download (9.5 kB)
1 |
/*
|
---|---|
2 |
* Toshiba TC6393XB I/O Controller.
|
3 |
* Found in Sharp Zaurus SL-6000 (tosa) or some
|
4 |
* Toshiba e-Series PDAs.
|
5 |
*
|
6 |
* Most features are currently unsupported!!!
|
7 |
*
|
8 |
* This code is licensed under the GNU GPL v2.
|
9 |
*/
|
10 |
#include "hw.h" |
11 |
#include "pxa.h" |
12 |
#include "devices.h" |
13 |
|
14 |
#define TC6393XB_GPIOS 16 |
15 |
|
16 |
#define SCR_REVID 0x08 /* b Revision ID */ |
17 |
#define SCR_ISR 0x50 /* b Interrupt Status */ |
18 |
#define SCR_IMR 0x52 /* b Interrupt Mask */ |
19 |
#define SCR_IRR 0x54 /* b Interrupt Routing */ |
20 |
#define SCR_GPER 0x60 /* w GP Enable */ |
21 |
#define SCR_GPI_SR(i) (0x64 + (i)) /* b3 GPI Status */ |
22 |
#define SCR_GPI_IMR(i) (0x68 + (i)) /* b3 GPI INT Mask */ |
23 |
#define SCR_GPI_EDER(i) (0x6c + (i)) /* b3 GPI Edge Detect Enable */ |
24 |
#define SCR_GPI_LIR(i) (0x70 + (i)) /* b3 GPI Level Invert */ |
25 |
#define SCR_GPO_DSR(i) (0x78 + (i)) /* b3 GPO Data Set */ |
26 |
#define SCR_GPO_DOECR(i) (0x7c + (i)) /* b3 GPO Data OE Control */ |
27 |
#define SCR_GP_IARCR(i) (0x80 + (i)) /* b3 GP Internal Active Register Control */ |
28 |
#define SCR_GP_IARLCR(i) (0x84 + (i)) /* b3 GP INTERNAL Active Register Level Control */ |
29 |
#define SCR_GPI_BCR(i) (0x88 + (i)) /* b3 GPI Buffer Control */ |
30 |
#define SCR_GPA_IARCR 0x8c /* w GPa Internal Active Register Control */ |
31 |
#define SCR_GPA_IARLCR 0x90 /* w GPa Internal Active Register Level Control */ |
32 |
#define SCR_GPA_BCR 0x94 /* w GPa Buffer Control */ |
33 |
#define SCR_CCR 0x98 /* w Clock Control */ |
34 |
#define SCR_PLL2CR 0x9a /* w PLL2 Control */ |
35 |
#define SCR_PLL1CR 0x9c /* l PLL1 Control */ |
36 |
#define SCR_DIARCR 0xa0 /* b Device Internal Active Register Control */ |
37 |
#define SCR_DBOCR 0xa1 /* b Device Buffer Off Control */ |
38 |
#define SCR_FER 0xe0 /* b Function Enable */ |
39 |
#define SCR_MCR 0xe4 /* w Mode Control */ |
40 |
#define SCR_CONFIG 0xfc /* b Configuration Control */ |
41 |
#define SCR_DEBUG 0xff /* b Debug */ |
42 |
|
43 |
struct tc6393xb_s {
|
44 |
target_phys_addr_t target_base; |
45 |
struct {
|
46 |
uint8_t ISR; |
47 |
uint8_t IMR; |
48 |
uint8_t IRR; |
49 |
uint16_t GPER; |
50 |
uint8_t GPI_SR[3];
|
51 |
uint8_t GPI_IMR[3];
|
52 |
uint8_t GPI_EDER[3];
|
53 |
uint8_t GPI_LIR[3];
|
54 |
uint8_t GP_IARCR[3];
|
55 |
uint8_t GP_IARLCR[3];
|
56 |
uint8_t GPI_BCR[3];
|
57 |
uint16_t GPA_IARCR; |
58 |
uint16_t GPA_IARLCR; |
59 |
uint16_t CCR; |
60 |
uint16_t PLL2CR; |
61 |
uint32_t PLL1CR; |
62 |
uint8_t DIARCR; |
63 |
uint8_t DBOCR; |
64 |
uint8_t FER; |
65 |
uint16_t MCR; |
66 |
uint8_t CONFIG; |
67 |
uint8_t DEBUG; |
68 |
} scr; |
69 |
uint32_t gpio_dir; |
70 |
uint32_t gpio_level; |
71 |
uint32_t prev_level; |
72 |
qemu_irq handler[TC6393XB_GPIOS]; |
73 |
qemu_irq *gpio_in; |
74 |
}; |
75 |
|
76 |
qemu_irq *tc6393xb_gpio_in_get(struct tc6393xb_s *s)
|
77 |
{ |
78 |
return s->gpio_in;
|
79 |
} |
80 |
|
81 |
static void tc6393xb_gpio_set(void *opaque, int line, int level) |
82 |
{ |
83 |
// struct tc6393xb_s *s = opaque;
|
84 |
|
85 |
if (line > TC6393XB_GPIOS) {
|
86 |
printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
|
87 |
return;
|
88 |
} |
89 |
|
90 |
// FIXME: how does the chip reflect the GPIO input level change?
|
91 |
} |
92 |
|
93 |
void tc6393xb_gpio_out_set(struct tc6393xb_s *s, int line, |
94 |
qemu_irq handler) |
95 |
{ |
96 |
if (line >= TC6393XB_GPIOS) {
|
97 |
fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line);
|
98 |
return;
|
99 |
} |
100 |
|
101 |
s->handler[line] = handler; |
102 |
} |
103 |
|
104 |
static void tc6393xb_gpio_handler_update(struct tc6393xb_s *s) |
105 |
{ |
106 |
uint32_t level, diff; |
107 |
int bit;
|
108 |
|
109 |
level = s->gpio_level & s->gpio_dir; |
110 |
|
111 |
for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) { |
112 |
bit = ffs(diff) - 1;
|
113 |
qemu_set_irq(s->handler[bit], (level >> bit) & 1);
|
114 |
} |
115 |
|
116 |
s->prev_level = level; |
117 |
} |
118 |
|
119 |
#define SCR_REG_B(N) \
|
120 |
case SCR_ ##N: return s->scr.N |
121 |
#define SCR_REG_W(N) \
|
122 |
case SCR_ ##N: return s->scr.N; \ |
123 |
case SCR_ ##N + 1: return s->scr.N >> 8; |
124 |
#define SCR_REG_L(N) \
|
125 |
case SCR_ ##N: return s->scr.N; \ |
126 |
case SCR_ ##N + 1: return s->scr.N >> 8; \ |
127 |
case SCR_ ##N + 2: return s->scr.N >> 16; \ |
128 |
case SCR_ ##N + 3: return s->scr.N >> 24; |
129 |
#define SCR_REG_A(N) \
|
130 |
case SCR_ ##N(0): return s->scr.N[0]; \ |
131 |
case SCR_ ##N(1): return s->scr.N[1]; \ |
132 |
case SCR_ ##N(2): return s->scr.N[2] |
133 |
|
134 |
static uint32_t tc6393xb_readb(void *opaque, target_phys_addr_t addr) |
135 |
{ |
136 |
struct tc6393xb_s *s = opaque;
|
137 |
addr -= s->target_base; |
138 |
switch (addr) {
|
139 |
case SCR_REVID:
|
140 |
return 3; |
141 |
case SCR_REVID+1: |
142 |
return 0; |
143 |
SCR_REG_B(ISR); |
144 |
SCR_REG_B(IMR); |
145 |
SCR_REG_B(IRR); |
146 |
SCR_REG_W(GPER); |
147 |
SCR_REG_A(GPI_SR); |
148 |
SCR_REG_A(GPI_IMR); |
149 |
SCR_REG_A(GPI_EDER); |
150 |
SCR_REG_A(GPI_LIR); |
151 |
case SCR_GPO_DSR(0): |
152 |
case SCR_GPO_DSR(1): |
153 |
case SCR_GPO_DSR(2): |
154 |
return (s->gpio_level >> ((addr - SCR_GPO_DSR(0)) * 8)) & 0xff; |
155 |
case SCR_GPO_DOECR(0): |
156 |
case SCR_GPO_DOECR(1): |
157 |
case SCR_GPO_DOECR(2): |
158 |
return (s->gpio_dir >> ((addr - SCR_GPO_DOECR(0)) * 8)) & 0xff; |
159 |
SCR_REG_A(GP_IARCR); |
160 |
SCR_REG_A(GP_IARLCR); |
161 |
SCR_REG_A(GPI_BCR); |
162 |
SCR_REG_W(GPA_IARCR); |
163 |
SCR_REG_W(GPA_IARLCR); |
164 |
SCR_REG_W(CCR); |
165 |
SCR_REG_W(PLL2CR); |
166 |
SCR_REG_L(PLL1CR); |
167 |
SCR_REG_B(DIARCR); |
168 |
SCR_REG_B(DBOCR); |
169 |
SCR_REG_B(FER); |
170 |
SCR_REG_W(MCR); |
171 |
SCR_REG_B(CONFIG); |
172 |
SCR_REG_B(DEBUG); |
173 |
} |
174 |
fprintf(stderr, "tc6393xb: unhandled read at %08x\n", (uint32_t) addr);
|
175 |
return 0; |
176 |
} |
177 |
#undef SCR_REG_B
|
178 |
#undef SCR_REG_W
|
179 |
#undef SCR_REG_L
|
180 |
#undef SCR_REG_A
|
181 |
|
182 |
#define SCR_REG_B(N) \
|
183 |
case SCR_ ##N: s->scr.N = value; break; |
184 |
#define SCR_REG_W(N) \
|
185 |
case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); break; \ |
186 |
case SCR_ ##N + 1: s->scr.N = (s->scr.N & 0xff) | (value << 8); break |
187 |
#define SCR_REG_L(N) \
|
188 |
case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); break; \ |
189 |
case SCR_ ##N + 1: s->scr.N = (s->scr.N & ~(0xff << 8)) | (value & (0xff << 8)); break; \ |
190 |
case SCR_ ##N + 2: s->scr.N = (s->scr.N & ~(0xff << 16)) | (value & (0xff << 16)); break; \ |
191 |
case SCR_ ##N + 3: s->scr.N = (s->scr.N & ~(0xff << 24)) | (value & (0xff << 24)); break; |
192 |
#define SCR_REG_A(N) \
|
193 |
case SCR_ ##N(0): s->scr.N[0] = value; break; \ |
194 |
case SCR_ ##N(1): s->scr.N[1] = value; break; \ |
195 |
case SCR_ ##N(2): s->scr.N[2] = value; break |
196 |
|
197 |
static void tc6393xb_writeb(void *opaque, target_phys_addr_t addr, uint32_t value) |
198 |
{ |
199 |
struct tc6393xb_s *s = opaque;
|
200 |
addr -= s->target_base; |
201 |
switch (addr) {
|
202 |
SCR_REG_B(ISR); |
203 |
SCR_REG_B(IMR); |
204 |
SCR_REG_B(IRR); |
205 |
SCR_REG_W(GPER); |
206 |
SCR_REG_A(GPI_SR); |
207 |
SCR_REG_A(GPI_IMR); |
208 |
SCR_REG_A(GPI_EDER); |
209 |
SCR_REG_A(GPI_LIR); |
210 |
case SCR_GPO_DSR(0): |
211 |
case SCR_GPO_DSR(1): |
212 |
case SCR_GPO_DSR(2): |
213 |
s->gpio_level = (s->gpio_level & ~(0xff << ((addr - SCR_GPO_DSR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DSR(0))*8)); |
214 |
tc6393xb_gpio_handler_update(s); |
215 |
break;
|
216 |
case SCR_GPO_DOECR(0): |
217 |
case SCR_GPO_DOECR(1): |
218 |
case SCR_GPO_DOECR(2): |
219 |
s->gpio_dir = (s->gpio_dir & ~(0xff << ((addr - SCR_GPO_DOECR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DOECR(0))*8)); |
220 |
tc6393xb_gpio_handler_update(s); |
221 |
break;
|
222 |
SCR_REG_A(GP_IARCR); |
223 |
SCR_REG_A(GP_IARLCR); |
224 |
SCR_REG_A(GPI_BCR); |
225 |
SCR_REG_W(GPA_IARCR); |
226 |
SCR_REG_W(GPA_IARLCR); |
227 |
SCR_REG_W(CCR); |
228 |
SCR_REG_W(PLL2CR); |
229 |
SCR_REG_L(PLL1CR); |
230 |
SCR_REG_B(DIARCR); |
231 |
SCR_REG_B(DBOCR); |
232 |
SCR_REG_B(FER); |
233 |
SCR_REG_W(MCR); |
234 |
SCR_REG_B(CONFIG); |
235 |
SCR_REG_B(DEBUG); |
236 |
default:
|
237 |
fprintf(stderr, "tc6393xb: unhandled write at %08x: %02x\n",
|
238 |
(uint32_t) addr, value & 0xff);
|
239 |
break;
|
240 |
} |
241 |
} |
242 |
#undef SCR_REG_B
|
243 |
#undef SCR_REG_W
|
244 |
#undef SCR_REG_L
|
245 |
#undef SCR_REG_A
|
246 |
|
247 |
static uint32_t tc6393xb_readw(void *opaque, target_phys_addr_t addr) |
248 |
{ |
249 |
return (tc6393xb_readb(opaque, addr) & 0xff) | |
250 |
(tc6393xb_readb(opaque, addr + 1) << 8); |
251 |
} |
252 |
|
253 |
static uint32_t tc6393xb_readl(void *opaque, target_phys_addr_t addr) |
254 |
{ |
255 |
return (tc6393xb_readb(opaque, addr) & 0xff) | |
256 |
((tc6393xb_readb(opaque, addr + 1) & 0xff) << 8) | |
257 |
((tc6393xb_readb(opaque, addr + 2) & 0xff) << 16) | |
258 |
((tc6393xb_readb(opaque, addr + 3) & 0xff) << 24); |
259 |
} |
260 |
|
261 |
static void tc6393xb_writew(void *opaque, target_phys_addr_t addr, uint32_t value) |
262 |
{ |
263 |
tc6393xb_writeb(opaque, addr, value); |
264 |
tc6393xb_writeb(opaque, addr + 1, value >> 8); |
265 |
} |
266 |
|
267 |
static void tc6393xb_writel(void *opaque, target_phys_addr_t addr, uint32_t value) |
268 |
{ |
269 |
tc6393xb_writeb(opaque, addr, value); |
270 |
tc6393xb_writeb(opaque, addr + 1, value >> 8); |
271 |
tc6393xb_writeb(opaque, addr + 2, value >> 16); |
272 |
tc6393xb_writeb(opaque, addr + 3, value >> 24); |
273 |
} |
274 |
|
275 |
struct tc6393xb_s *tc6393xb_init(uint32_t base, qemu_irq irq)
|
276 |
{ |
277 |
int iomemtype;
|
278 |
struct tc6393xb_s *s;
|
279 |
CPUReadMemoryFunc *tc6393xb_readfn[] = { |
280 |
tc6393xb_readb, |
281 |
tc6393xb_readw, |
282 |
tc6393xb_readl, |
283 |
}; |
284 |
CPUWriteMemoryFunc *tc6393xb_writefn[] = { |
285 |
tc6393xb_writeb, |
286 |
tc6393xb_writew, |
287 |
tc6393xb_writel, |
288 |
}; |
289 |
|
290 |
s = (struct tc6393xb_s *) qemu_mallocz(sizeof(struct tc6393xb_s)); |
291 |
s->target_base = base; |
292 |
s->gpio_in = qemu_allocate_irqs(tc6393xb_gpio_set, s, TC6393XB_GPIOS); |
293 |
|
294 |
iomemtype = cpu_register_io_memory(0, tc6393xb_readfn,
|
295 |
tc6393xb_writefn, s); |
296 |
cpu_register_physical_memory(s->target_base, 0x200000, iomemtype);
|
297 |
|
298 |
return s;
|
299 |
} |