target-alpha: Drop bogus UNIQ initial value on Linux.
Signed-off-by: Richard Henderson <rth@twiddle.net>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-alpha: Fixes for alpha-linux syscalls.
1. Add correct definitions of error numbers.2. Implement SYS_osf_sigprocmask3. Implement SYS_osf_get/setsysinfo for IEEE_FP_CONTROL.
This last requires exposing the FPCR value to do_syscall.Since this value is actually split up into the float_status,...
Fix ARM userspace strex implementation.
Signed-off-by: Paul Brook <paul@codesourcery.com>
linux-user: remove hardcoded value of _NSIG in signal.c
In a bunch of places, 64 is used as value of _NSIG but it's wrongat least on MIPS were _NSIG is 128.
Based on a patch from Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add missing break.
ARM atomic ops rewrite
Implement ARMv6 atomic ops (ldrex/strex) using the same trick as PPC.
target-mips: rename CP0_LLAddr into lladdr
The variable CP0_LLAddr represent the full lladdr, not the actualregister value, which is only part of this value and depends on theCPU.
(x86/Sparc/PPC)-user: fix cpu_copy
b55a37c981914aa8ecd21b9a2a2fb37f39b917c5 moved the call to cpu_resetto user emulators. But cpu_copy also initializes a CPU structure, so add thecall also there.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
user: move CPU reset call to main.c for x86/PPC/Sparc
Re: linux-user/syscall.c - don't add GUEST_BASE to NULL pointer
This patch fixes the mount call. GUEST_BASE shouldn't be added to a NULL pointer on arg5 . failing call:mount("rootfs", "/", 0x47a78, MS_MGC_VAL|MS_REMOUNT, 0x10000) = -1 EFAULT (Bad address)...
linux-user: KD/VT/FB ioctls
everything needed to run SDL on a framebuffer device in the userspace emulator
Signed-off-by: Ulrich Hecht <uli@suse.de>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
linux-user: Update ARM hwcaps
Update ARM hwcaps to match Linux kernel 2.6.31 state
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
linux-user: don't zero a buffer twice
prepare_binprm() zeroes bprm->buf. That buffer is already zeroed inmain() and hasn't been touched since so that is not necessary.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
linux-user: fix ppc target_stat64 st_blocks layout
Swap __pad1 and st_blocks fields location to maintain proper alignment.This fixes incorrect 'du' and 'stat' report on ppc guest.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
implementations of dup3 and fallocate that are good enough to fool LTP
updated fallocate check to new configure, added dup3 check as suggestedby Jan-Simon Möller.
Riku: updated to apply to current git.
linux-user: getpriority errno fix
getpriority returned wrong errno; fixes LTP test getpriority02.
linux-user: fix "#if 0"'d printf()
Make an "#if 0"'d printf() in load_elf_binary(), probably left to aid indebugging, reflect what the actual code does. The current printf() willonly confuse those who "#if 1" it (it certainly confused me enough towrite this trivial patch)....
linux-user: fix up oversealous nitpicking
Looks like linux-user code was correct, just unreadable: what it wantedto do with "-=" was really assign a negative number, not decrement. Fixup accordingly.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>...
Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Somethinglike this must be presented on the list first so people can provide input...
Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the timebeing.
Signed-off-by: malc <av1474@comtv.ru>
linux-user: fix coding style nit
Put space between = and & when taking a pointer,to avoid confusion with old-style "&=".
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
elfload: fix coding style nit
Put space between = and * when dereferencing a pointer,to avoid confusion with old-style "*="
linux-user: fix old style decrement usage
Modern compilers do not parse "=-" as decrement:you must use "-=" for that.
__thread should be before real type
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
static and inline should came before the type of the functions
Export tables properly to avoid a Sparse warning
Fix Sparse warnings about using plain integer as NULL pointer
Compile loader only once
Callers must pass ELF machine, byte swapping and symbol LSB clearinginformation to ELF loader. A.out loader needs page size information, passthat too as a parameter.
Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw....
Revert "Fix Sparc/Linux host breakage by df70204db53e3611af986f434e74a882bce190ca"
This reverts commit 91b40c5be84a478e98c0416325844a7f66d0efae.
Fix Sparc/Linux host breakage by df70204db53e3611af986f434e74a882bce190ca
While i386, x86_64 and Sparc64/OpenBSD still worked afterdf70204db53e3611af986f434e74a882bce190ca, Sparc32 and Sparc64 Linux hostsbroke.
Partially revert the commit: make the restored code conditional to...
Fix text relocations in linux-user targets
There is a link hack in linux-user which produces an executable thatlooks like PIE, but always has text relocations since all object filesisn't position-independent (compiled without -fpic/-fpie). Dynamic loader...
Fix sys-queue.h conflict for good
Problem: Our file sys-queue.h is a copy of the BSD file, but there aresome additions and it's not entirely compatible. Because of that, there havebeen conflicts with system headers on BSD systems. Some hacks have beenintroduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896,...
F_DUPFD_CLOEXEC is not universally available
The same issue (and the same patch to the byte) was experienced/proposedby Vince Weaver.
Fix Sparse warnings: add "static"
linux-user: fadvise64 implementation
good enough to pass all LTP fadvise64 tests
linux-user: zero fstat buffer to initialize nsec fields
The fstat implementation does not initialize the nanosecond fields in thestat buffer; this caused funny values to turn up there, preventing, forinstance, cp -p from preserving timestamps because utimensat rejected...
linux-user: Rewrite mmap_find_vma() to work fine on 64-bit hosts with 32-bit targets
qemu's page table can be incomple if /proc/self/maps is unavailable orhost allocating a memory with mmap(), so we can't use it to find freememory area.
New version mmap_find_vma() uses mmap() without MAP_FIXED to find free...
m68k, linux-user: add setup_rt_frame
This patch implements setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
m68k, linux-user: enable sigaltstack()
As setup_frame() and setup_rt_frame() are now implemented we can nowenable sigaltstack().
linux-user: fix mq_* compilation problems
mqueue.h is only available if _NR_mq_open is defined. So don't includeit unconditionally. Similarly, the mq* family of syscalls depend on_NR_mq_open. Finally, the copy{from,to}_user_mq_attr functions should...
linux-user: fcntl fixes for LTP
Fixes swaps on l_pid which were pretty much of random size. ImplementsF_SETLEASE, F_GETLEASE. Now passes all LTP fcntl tests.
linux-user: enable getdents for > 32-bit systems
works perfectly fine with the example from getdents(2) and passes the LTPtests (tested with s390x on x86_64 emulation)
m68k,linux-user: add setup_frame
This patch adds signals management for linux-user.
It implements setup_frame() which allows to call the user signalhandler.
setup_rt_frame() is always unimplemented.
linux-user: add eventfd support
Straightforward implementation. This syscall is rare enough that wedon't need to support the odder cases, just disable it if host glibcis too old.
Replace local ADDRX/PADDRX macros with TARGET_FMT_lx/plx
linux-user: compile envlist.c only once
user: compile path.c only once
Also merge bsd-user/path.c and linux-user/path.c.
Fix symfind.
this patch fixes an issue in symfind.
Assume you have the following symbols:
Address Size0045bca0 00000080 T s00045bd20 00000112 T s1
You'll notice that s1 is s0 + size.
So the current symfind will find that address 0045bd20 belongs to s0...
Sparc64: replace tsptr with helper routine
tl and tsptr of members sparc64 cpu state must be changedsimultaneously to keep trap state window in sync with currenttrap level. Currently translation of store to tl does not changetsptr, which leads to corrupt trap state on corresponding...
linux-user: make FUTEX_* calls honor timeout parameter
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>Signed-off-by: malc <av1474@comtv.ru>
linux-user: handle POWERPC_EXCP_STCX
We handle conditional stores as an exception so we can ensure that noother thread is changing memory out from underneath us.
More NULL pointer fixes
rename USE_NPTL to CONFIG_USE_NPTL
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
rename HAVE_GPROF to TARGET_GPROF
Use was not consistent, in Makefile was TARGET_GPROF and in *h HAVE_GPROF
rename WORDS_BIGENDIAN to HOST_WORDS_BIGENDIAN
Fix most warnings (errors with -Werror) when debugging is enabled
I used the following command to enable debugging:perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * /* *//*
Use correct byteswap routine for elf_note
All elf64_note structure members are Elf64_Word (which is 32bit value)hence using bswaptls to byteswap it on 64bit platforms is incorrect.
Avoid name clashes with symbols that leak from system headers
ELF codedump build failures
Rename ELF coredump types to avoid conflict with the corresponding host types.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Userspace guest address offsetting
Re-implement GUEST_BASE support.Offset guest ddress space by default if the guest binary containsregions below the host mmap_min_addr.Implement support for i386, x86-64 and arm hosts.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>...
Update to a hopefully more future proof FSF address
Avoid SIGSEGV when dumping cpu state without enabled logging
consolidate user cpu_{in, out}[bwl] into ioport-user.c
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Merge commit 'linux-user/linux-user-for-upstream' into tmp-staging
MIPS signal handling fix
Add explicit padding to MIPS signal frame structures.
MIPS atomic instructions
Implement MIPS ll/sc instructions using atomic compare+exchange.
Fix MIPS sys_clone
The clone syscall takes 6 args.
wrap path for access syscall
getrlimit conversion mix-up
Fixes getrlimit implementation that overwrote the result of the syscallinstead of converting it
pipe argument should not be signed
pipedes is an address, it should not be signed (breaks for addresses
0x80000000)
64-bit clean socketcall syscall
makes socketcall 64-bit clean so it works on 64-bit big-endian systems
linux-user: increment MAX_ARG_PAGES
There's a error When doing something like that :find / -type f -print0 | xargs -0 echo
[ done in a arm chroot with qemu-arm and linux binfmt stuff or withfind / -type f -print0 | qemu-arm -L <path> <path>/usr/bin/xargs -0...
linux-user: check some parameters for some socket syscalls.
This patch is fixing following issues :
- commit 8fea36025b9d6d360ff3b78f88a84ccf221807e8 was applied to do_getsockname instead of do_accept.- Some syscalls were not checking properly the memory addresses passed...
linux-user/syscall.c: remove warning: ‘array’ may be used uninitialized in this function
Removes the following warning
CC i386-linux-user/syscall.occ1: warnings being treated as errors/media/nfs/qemu/linux-user/syscall.c: In function ‘do_syscall’:/media/nfs/qemu/linux-user/syscall.c:2219: warning: ‘array’ may be used uninitialized in this function...
Fix missing strnlen problems
Fix missing strnlen (a GNU extension) problems by using qemu_strnlenused for user emulators also for system emulators.
microblaze: Support the latest mmu-kernel stat64 ABI.
Microblaze recently changed their ABI. The new is not backwards compatibleand there doesn't seem to be a way to distinguish old/new binaries.Let's support the latest ABI for now and hope someone figures out a way to...
linux-user: strace now handles guest stringscorrectly [v2]
On Tue, Jun 16, 2009 at 08:19:23PM -0500, Anthony Liguori wrote:
malc wrote: On my system the above line causes gcc to emit: In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12:...
malc wrote:
On my system the above line causes gcc to emit: In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12:...
On my system the above line causes gcc to emit:
In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12:...
RFC: fix fcntl support in linux-user - new try
Hi,
This is a new try to fix the fcntl support in linux-user. I tried toadress all comments but as the previous version is several weeks old,it's possible that I've missed some.
This patch doesn't handle linux specific fcntl flags. My plan is to get...
linux-user: initialize mmap_mutex properly
We initialize mmap_mutex in any child threads/processes, but we need tocorrectly statically initialize it for the original process.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
linux-user/syscall.c: define _ATFILE_SOURCE
Needed to make sure the xxxat() functions are available.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
linux-user: remove duplicate tswap32() from do_getsockopt()
This issue has been detected with tests/linux-tests.c:
linux-test.c:330: getsockopt
327 len = sizeof(val);328 chk_error(getsockopt(server_fd, SOL_SOCKET, SO_TYPE, &val, &len));329 if (val != SOCK_STREAM)...
linux-user: add tee, splice and vmsplice
Add support for tee, splice and vmsplice.
Originally from: vibi sreenivasan <vibi_sreenivasan@cms.com>
Riku: squashed patches together, added a test to configureand removed compliler warning by picking up correct type for...
linux-user: Added IP_ADD_MEMBERSHIP/IP_DROP_MEMBERSHIP flags to setsockopt
Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
linux-user: Added IP_(UN)BLOCK_SOURCE/IP_(ADD|DROP)_SOURCE_MEMBERSHIP flags to setsockopt
linux-user: include linux/fs.h
defines FIGETBSZ FIBMAP, allowing the respective ioctl's tobe implemented.
From: Martin Mohring <martin.mohring@opensuse.org>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
linux-user: support private futexes
Implemented the same way as in the kernel.
add futex wake op
linux-user: update syscall list
In preparation for supporting pipe2()
linux-user: implement pipe2 [v3]
implement pipe2 syscall.
[v2] fix do_pipe on mips and sh4[v3] use pipe2 to ensure atomicity, but only when it is available.
export mmap_find_vma for shmat
Implement shm* syscalls and fix 64/32bit errors
No regressions were observed on either 64bit or 32bitIA hosts.
Patch based on original patches by: Kirill A. Shutemov <kirill@shutemov.name> - Implement shm* syscalls - Fix and cleanup IPCOP_shm* ipc calls handling...
linux-user: implemented ELF coredump support for ARM target
When target process is killed with signal (such signal thatshould dump core) a coredump file is created. This file issimilar than coredump generated by Linux (there are few exceptionsthough)....
linux-user: added x86 and x86_64 support for ELF coredump
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
linux-user: strace now handles guest strings correctly [v2]
- to not to break strace with GUEST_BASE is set:- Strace now can load and print guest strings correctly.- Added printing support for commonly used flags in some syscalls (e.g open, creat, mmap etc.)...
linux-user: fix utimensat
The glibc function for utimensat glibc returns -EINVAL when the path is nullwhich is a different behaviour with the syscall.
path can be null because internally the glibc is using utimensat withpath null when implmenting futimens. If path is null, call futimes...
Fix struct termios host - target translation
When converting the termios structure between host and target intarget_to_host_termios and host_to_target_termios, the c_cc[] array isnever initialised.Calling memset() before using it allows to run successfully "stty echo /...
Return EOPNOTSUPP instead of ENOSYS for xattr syscalls
In current code, we're sending ENOSYS to target when a syscall for thexattrs is done. This makes applications like ls complain loudly aboutthat and breaks scripts parsing the output. Moreover, iirc, implemented...
fix gdbstub support for multiple threads in usermode, v3
When debugging multi-threaded programs, QEMU's gdb stub would report thecorrect number of threads (the qfThreadInfo and qsThreadInfo packets).However, the stub was unable to actually switch between threads (the T...
microblaze: linux-user support.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
microblaze: Add syscall, signal and termbits defs for linux-user.