root / hw / omap_i2c.c @ a214c598
History | View | Annotate | Download (14.6 kB)
1 |
/*
|
---|---|
2 |
* TI OMAP on-chip I2C controller. Only "new I2C" mode supported.
|
3 |
*
|
4 |
* Copyright (C) 2007 Andrzej Zaborowski <balrog@zabor.org>
|
5 |
*
|
6 |
* This program is free software; you can redistribute it and/or
|
7 |
* modify it under the terms of the GNU General Public License as
|
8 |
* published by the Free Software Foundation; either version 2 of
|
9 |
* the License, or (at your option) any later version.
|
10 |
*
|
11 |
* This program is distributed in the hope that it will be useful,
|
12 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
13 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
14 |
* GNU General Public License for more details.
|
15 |
*
|
16 |
* You should have received a copy of the GNU General Public License
|
17 |
* along with this program; if not, write to the Free Software
|
18 |
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
19 |
* MA 02111-1307 USA
|
20 |
*/
|
21 |
#include "hw.h" |
22 |
#include "i2c.h" |
23 |
#include "omap.h" |
24 |
|
25 |
struct omap_i2c_s {
|
26 |
target_phys_addr_t base; |
27 |
qemu_irq irq; |
28 |
qemu_irq drq[2];
|
29 |
i2c_slave slave; |
30 |
i2c_bus *bus; |
31 |
|
32 |
uint8_t revision; |
33 |
uint8_t mask; |
34 |
uint16_t stat; |
35 |
uint16_t dma; |
36 |
uint16_t count; |
37 |
int count_cur;
|
38 |
uint32_t fifo; |
39 |
int rxlen;
|
40 |
int txlen;
|
41 |
uint16_t control; |
42 |
uint16_t addr[2];
|
43 |
uint8_t divider; |
44 |
uint8_t times[2];
|
45 |
uint16_t test; |
46 |
}; |
47 |
|
48 |
#define OMAP2_INTR_REV 0x34 |
49 |
#define OMAP2_GC_REV 0x34 |
50 |
|
51 |
static void omap_i2c_interrupts_update(struct omap_i2c_s *s) |
52 |
{ |
53 |
qemu_set_irq(s->irq, s->stat & s->mask); |
54 |
if ((s->dma >> 15) & 1) /* RDMA_EN */ |
55 |
qemu_set_irq(s->drq[0], (s->stat >> 3) & 1); /* RRDY */ |
56 |
if ((s->dma >> 7) & 1) /* XDMA_EN */ |
57 |
qemu_set_irq(s->drq[1], (s->stat >> 4) & 1); /* XRDY */ |
58 |
} |
59 |
|
60 |
/* These are only stubs now. */
|
61 |
static void omap_i2c_event(i2c_slave *i2c, enum i2c_event event) |
62 |
{ |
63 |
struct omap_i2c_s *s = (struct omap_i2c_s *) i2c; |
64 |
|
65 |
if ((~s->control >> 15) & 1) /* I2C_EN */ |
66 |
return;
|
67 |
|
68 |
switch (event) {
|
69 |
case I2C_START_SEND:
|
70 |
case I2C_START_RECV:
|
71 |
s->stat |= 1 << 9; /* AAS */ |
72 |
break;
|
73 |
case I2C_FINISH:
|
74 |
s->stat |= 1 << 2; /* ARDY */ |
75 |
break;
|
76 |
case I2C_NACK:
|
77 |
s->stat |= 1 << 1; /* NACK */ |
78 |
break;
|
79 |
} |
80 |
|
81 |
omap_i2c_interrupts_update(s); |
82 |
} |
83 |
|
84 |
static int omap_i2c_rx(i2c_slave *i2c) |
85 |
{ |
86 |
struct omap_i2c_s *s = (struct omap_i2c_s *) i2c; |
87 |
uint8_t ret = 0;
|
88 |
|
89 |
if ((~s->control >> 15) & 1) /* I2C_EN */ |
90 |
return -1; |
91 |
|
92 |
if (s->txlen)
|
93 |
ret = s->fifo >> ((-- s->txlen) << 3) & 0xff; |
94 |
else
|
95 |
s->stat |= 1 << 10; /* XUDF */ |
96 |
s->stat |= 1 << 4; /* XRDY */ |
97 |
|
98 |
omap_i2c_interrupts_update(s); |
99 |
return ret;
|
100 |
} |
101 |
|
102 |
static int omap_i2c_tx(i2c_slave *i2c, uint8_t data) |
103 |
{ |
104 |
struct omap_i2c_s *s = (struct omap_i2c_s *) i2c; |
105 |
|
106 |
if ((~s->control >> 15) & 1) /* I2C_EN */ |
107 |
return 1; |
108 |
|
109 |
if (s->rxlen < 4) |
110 |
s->fifo |= data << ((s->rxlen ++) << 3);
|
111 |
else
|
112 |
s->stat |= 1 << 11; /* ROVR */ |
113 |
s->stat |= 1 << 3; /* RRDY */ |
114 |
|
115 |
omap_i2c_interrupts_update(s); |
116 |
return 1; |
117 |
} |
118 |
|
119 |
static void omap_i2c_fifo_run(struct omap_i2c_s *s) |
120 |
{ |
121 |
int ack = 1; |
122 |
|
123 |
if (!i2c_bus_busy(s->bus))
|
124 |
return;
|
125 |
|
126 |
if ((s->control >> 2) & 1) { /* RM */ |
127 |
if ((s->control >> 1) & 1) { /* STP */ |
128 |
i2c_end_transfer(s->bus); |
129 |
s->control &= ~(1 << 1); /* STP */ |
130 |
s->count_cur = s->count; |
131 |
s->txlen = 0;
|
132 |
} else if ((s->control >> 9) & 1) { /* TRX */ |
133 |
while (ack && s->txlen)
|
134 |
ack = (i2c_send(s->bus, |
135 |
(s->fifo >> ((-- s->txlen) << 3)) &
|
136 |
0xff) >= 0); |
137 |
s->stat |= 1 << 4; /* XRDY */ |
138 |
} else {
|
139 |
while (s->rxlen < 4) |
140 |
s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
|
141 |
s->stat |= 1 << 3; /* RRDY */ |
142 |
} |
143 |
} else {
|
144 |
if ((s->control >> 9) & 1) { /* TRX */ |
145 |
while (ack && s->count_cur && s->txlen) {
|
146 |
ack = (i2c_send(s->bus, |
147 |
(s->fifo >> ((-- s->txlen) << 3)) &
|
148 |
0xff) >= 0); |
149 |
s->count_cur --; |
150 |
} |
151 |
if (ack && s->count_cur)
|
152 |
s->stat |= 1 << 4; /* XRDY */ |
153 |
else
|
154 |
s->stat &= ~(1 << 4); /* XRDY */ |
155 |
if (!s->count_cur) {
|
156 |
s->stat |= 1 << 2; /* ARDY */ |
157 |
s->control &= ~(1 << 10); /* MST */ |
158 |
} |
159 |
} else {
|
160 |
while (s->count_cur && s->rxlen < 4) { |
161 |
s->fifo |= i2c_recv(s->bus) << ((s->rxlen ++) << 3);
|
162 |
s->count_cur --; |
163 |
} |
164 |
if (s->rxlen)
|
165 |
s->stat |= 1 << 3; /* RRDY */ |
166 |
else
|
167 |
s->stat &= ~(1 << 3); /* RRDY */ |
168 |
} |
169 |
if (!s->count_cur) {
|
170 |
if ((s->control >> 1) & 1) { /* STP */ |
171 |
i2c_end_transfer(s->bus); |
172 |
s->control &= ~(1 << 1); /* STP */ |
173 |
s->count_cur = s->count; |
174 |
s->txlen = 0;
|
175 |
} else {
|
176 |
s->stat |= 1 << 2; /* ARDY */ |
177 |
s->control &= ~(1 << 10); /* MST */ |
178 |
} |
179 |
} |
180 |
} |
181 |
|
182 |
s->stat |= (!ack) << 1; /* NACK */ |
183 |
if (!ack)
|
184 |
s->control &= ~(1 << 1); /* STP */ |
185 |
} |
186 |
|
187 |
void omap_i2c_reset(struct omap_i2c_s *s) |
188 |
{ |
189 |
s->mask = 0;
|
190 |
s->stat = 0;
|
191 |
s->dma = 0;
|
192 |
s->count = 0;
|
193 |
s->count_cur = 0;
|
194 |
s->fifo = 0;
|
195 |
s->rxlen = 0;
|
196 |
s->txlen = 0;
|
197 |
s->control = 0;
|
198 |
s->addr[0] = 0; |
199 |
s->addr[1] = 0; |
200 |
s->divider = 0;
|
201 |
s->times[0] = 0; |
202 |
s->times[1] = 0; |
203 |
s->test = 0;
|
204 |
} |
205 |
|
206 |
static uint32_t omap_i2c_read(void *opaque, target_phys_addr_t addr) |
207 |
{ |
208 |
struct omap_i2c_s *s = (struct omap_i2c_s *) opaque; |
209 |
int offset = addr & OMAP_MPUI_REG_MASK;
|
210 |
uint16_t ret; |
211 |
|
212 |
switch (offset) {
|
213 |
case 0x00: /* I2C_REV */ |
214 |
return s->revision; /* REV */ |
215 |
|
216 |
case 0x04: /* I2C_IE */ |
217 |
return s->mask;
|
218 |
|
219 |
case 0x08: /* I2C_STAT */ |
220 |
return s->stat | (i2c_bus_busy(s->bus) << 12); |
221 |
|
222 |
case 0x0c: /* I2C_IV */ |
223 |
if (s->revision >= OMAP2_INTR_REV)
|
224 |
break;
|
225 |
ret = ffs(s->stat & s->mask); |
226 |
if (ret)
|
227 |
s->stat ^= 1 << (ret - 1); |
228 |
omap_i2c_interrupts_update(s); |
229 |
return ret;
|
230 |
|
231 |
case 0x10: /* I2C_SYSS */ |
232 |
return (s->control >> 15) & 1; /* I2C_EN */ |
233 |
|
234 |
case 0x14: /* I2C_BUF */ |
235 |
return s->dma;
|
236 |
|
237 |
case 0x18: /* I2C_CNT */ |
238 |
return s->count_cur; /* DCOUNT */ |
239 |
|
240 |
case 0x1c: /* I2C_DATA */ |
241 |
ret = 0;
|
242 |
if (s->control & (1 << 14)) { /* BE */ |
243 |
ret |= ((s->fifo >> 0) & 0xff) << 8; |
244 |
ret |= ((s->fifo >> 8) & 0xff) << 0; |
245 |
} else {
|
246 |
ret |= ((s->fifo >> 8) & 0xff) << 8; |
247 |
ret |= ((s->fifo >> 0) & 0xff) << 0; |
248 |
} |
249 |
if (s->rxlen == 1) { |
250 |
s->stat |= 1 << 15; /* SBD */ |
251 |
s->rxlen = 0;
|
252 |
} else if (s->rxlen > 1) { |
253 |
if (s->rxlen > 2) |
254 |
s->fifo >>= 16;
|
255 |
s->rxlen -= 2;
|
256 |
} else
|
257 |
/* XXX: remote access (qualifier) error - what's that? */;
|
258 |
if (!s->rxlen) {
|
259 |
s->stat &= ~(1 << 3); /* RRDY */ |
260 |
if (((s->control >> 10) & 1) && /* MST */ |
261 |
((~s->control >> 9) & 1)) { /* TRX */ |
262 |
s->stat |= 1 << 2; /* ARDY */ |
263 |
s->control &= ~(1 << 10); /* MST */ |
264 |
} |
265 |
} |
266 |
s->stat &= ~(1 << 11); /* ROVR */ |
267 |
omap_i2c_fifo_run(s); |
268 |
omap_i2c_interrupts_update(s); |
269 |
return ret;
|
270 |
|
271 |
case 0x20: /* I2C_SYSC */ |
272 |
return 0; |
273 |
|
274 |
case 0x24: /* I2C_CON */ |
275 |
return s->control;
|
276 |
|
277 |
case 0x28: /* I2C_OA */ |
278 |
return s->addr[0]; |
279 |
|
280 |
case 0x2c: /* I2C_SA */ |
281 |
return s->addr[1]; |
282 |
|
283 |
case 0x30: /* I2C_PSC */ |
284 |
return s->divider;
|
285 |
|
286 |
case 0x34: /* I2C_SCLL */ |
287 |
return s->times[0]; |
288 |
|
289 |
case 0x38: /* I2C_SCLH */ |
290 |
return s->times[1]; |
291 |
|
292 |
case 0x3c: /* I2C_SYSTEST */ |
293 |
if (s->test & (1 << 15)) { /* ST_EN */ |
294 |
s->test ^= 0xa;
|
295 |
return s->test;
|
296 |
} else
|
297 |
return s->test & ~0x300f; |
298 |
} |
299 |
|
300 |
OMAP_BAD_REG(addr); |
301 |
return 0; |
302 |
} |
303 |
|
304 |
static void omap_i2c_write(void *opaque, target_phys_addr_t addr, |
305 |
uint32_t value) |
306 |
{ |
307 |
struct omap_i2c_s *s = (struct omap_i2c_s *) opaque; |
308 |
int offset = addr & OMAP_MPUI_REG_MASK;
|
309 |
int nack;
|
310 |
|
311 |
switch (offset) {
|
312 |
case 0x00: /* I2C_REV */ |
313 |
case 0x0c: /* I2C_IV */ |
314 |
case 0x10: /* I2C_SYSS */ |
315 |
OMAP_RO_REG(addr); |
316 |
return;
|
317 |
|
318 |
case 0x04: /* I2C_IE */ |
319 |
s->mask = value & (s->revision < OMAP2_GC_REV ? 0x1f : 0x3f); |
320 |
break;
|
321 |
|
322 |
case 0x08: /* I2C_STAT */ |
323 |
if (s->revision < OMAP2_INTR_REV) {
|
324 |
OMAP_RO_REG(addr); |
325 |
return;
|
326 |
} |
327 |
|
328 |
/* RRDY and XRDY are reset by hardware. (in all versions???) */
|
329 |
s->stat &= ~(value & 0x27);
|
330 |
omap_i2c_interrupts_update(s); |
331 |
break;
|
332 |
|
333 |
case 0x14: /* I2C_BUF */ |
334 |
s->dma = value & 0x8080;
|
335 |
if (value & (1 << 15)) /* RDMA_EN */ |
336 |
s->mask &= ~(1 << 3); /* RRDY_IE */ |
337 |
if (value & (1 << 7)) /* XDMA_EN */ |
338 |
s->mask &= ~(1 << 4); /* XRDY_IE */ |
339 |
break;
|
340 |
|
341 |
case 0x18: /* I2C_CNT */ |
342 |
s->count = value; /* DCOUNT */
|
343 |
break;
|
344 |
|
345 |
case 0x1c: /* I2C_DATA */ |
346 |
if (s->txlen > 2) { |
347 |
/* XXX: remote access (qualifier) error - what's that? */
|
348 |
break;
|
349 |
} |
350 |
s->fifo <<= 16;
|
351 |
s->txlen += 2;
|
352 |
if (s->control & (1 << 14)) { /* BE */ |
353 |
s->fifo |= ((value >> 8) & 0xff) << 8; |
354 |
s->fifo |= ((value >> 0) & 0xff) << 0; |
355 |
} else {
|
356 |
s->fifo |= ((value >> 0) & 0xff) << 8; |
357 |
s->fifo |= ((value >> 8) & 0xff) << 0; |
358 |
} |
359 |
s->stat &= ~(1 << 10); /* XUDF */ |
360 |
if (s->txlen > 2) |
361 |
s->stat &= ~(1 << 4); /* XRDY */ |
362 |
omap_i2c_fifo_run(s); |
363 |
omap_i2c_interrupts_update(s); |
364 |
break;
|
365 |
|
366 |
case 0x20: /* I2C_SYSC */ |
367 |
if (s->revision < OMAP2_INTR_REV) {
|
368 |
OMAP_BAD_REG(addr); |
369 |
return;
|
370 |
} |
371 |
|
372 |
if (value & 2) |
373 |
omap_i2c_reset(s); |
374 |
break;
|
375 |
|
376 |
case 0x24: /* I2C_CON */ |
377 |
s->control = value & 0xcf87;
|
378 |
if (~value & (1 << 15)) { /* I2C_EN */ |
379 |
if (s->revision < OMAP2_INTR_REV)
|
380 |
omap_i2c_reset(s); |
381 |
break;
|
382 |
} |
383 |
if ((value & (1 << 15)) && !(value & (1 << 10))) { /* MST */ |
384 |
fprintf(stderr, "%s: I^2C slave mode not supported\n",
|
385 |
__FUNCTION__); |
386 |
break;
|
387 |
} |
388 |
if ((value & (1 << 15)) && value & (1 << 8)) { /* XA */ |
389 |
fprintf(stderr, "%s: 10-bit addressing mode not supported\n",
|
390 |
__FUNCTION__); |
391 |
break;
|
392 |
} |
393 |
if ((value & (1 << 15)) && value & (1 << 0)) { /* STT */ |
394 |
nack = !!i2c_start_transfer(s->bus, s->addr[1], /* SA */ |
395 |
(~value >> 9) & 1); /* TRX */ |
396 |
s->stat |= nack << 1; /* NACK */ |
397 |
s->control &= ~(1 << 0); /* STT */ |
398 |
if (nack)
|
399 |
s->control &= ~(1 << 1); /* STP */ |
400 |
else {
|
401 |
s->count_cur = s->count; |
402 |
omap_i2c_fifo_run(s); |
403 |
} |
404 |
omap_i2c_interrupts_update(s); |
405 |
} |
406 |
break;
|
407 |
|
408 |
case 0x28: /* I2C_OA */ |
409 |
s->addr[0] = value & 0x3ff; |
410 |
i2c_set_slave_address(&s->slave, value & 0x7f);
|
411 |
break;
|
412 |
|
413 |
case 0x2c: /* I2C_SA */ |
414 |
s->addr[1] = value & 0x3ff; |
415 |
break;
|
416 |
|
417 |
case 0x30: /* I2C_PSC */ |
418 |
s->divider = value; |
419 |
break;
|
420 |
|
421 |
case 0x34: /* I2C_SCLL */ |
422 |
s->times[0] = value;
|
423 |
break;
|
424 |
|
425 |
case 0x38: /* I2C_SCLH */ |
426 |
s->times[1] = value;
|
427 |
break;
|
428 |
|
429 |
case 0x3c: /* I2C_SYSTEST */ |
430 |
s->test = value & 0xf80f;
|
431 |
if (value & (1 << 11)) /* SBB */ |
432 |
if (s->revision >= OMAP2_INTR_REV) {
|
433 |
s->stat |= 0x3f;
|
434 |
omap_i2c_interrupts_update(s); |
435 |
} |
436 |
if (value & (1 << 15)) /* ST_EN */ |
437 |
fprintf(stderr, "%s: System Test not supported\n", __FUNCTION__);
|
438 |
break;
|
439 |
|
440 |
default:
|
441 |
OMAP_BAD_REG(addr); |
442 |
return;
|
443 |
} |
444 |
} |
445 |
|
446 |
static void omap_i2c_writeb(void *opaque, target_phys_addr_t addr, |
447 |
uint32_t value) |
448 |
{ |
449 |
struct omap_i2c_s *s = (struct omap_i2c_s *) opaque; |
450 |
int offset = addr & OMAP_MPUI_REG_MASK;
|
451 |
|
452 |
switch (offset) {
|
453 |
case 0x1c: /* I2C_DATA */ |
454 |
if (s->txlen > 2) { |
455 |
/* XXX: remote access (qualifier) error - what's that? */
|
456 |
break;
|
457 |
} |
458 |
s->fifo <<= 8;
|
459 |
s->txlen += 1;
|
460 |
s->fifo |= value & 0xff;
|
461 |
s->stat &= ~(1 << 10); /* XUDF */ |
462 |
if (s->txlen > 2) |
463 |
s->stat &= ~(1 << 4); /* XRDY */ |
464 |
omap_i2c_fifo_run(s); |
465 |
omap_i2c_interrupts_update(s); |
466 |
break;
|
467 |
|
468 |
default:
|
469 |
OMAP_BAD_REG(addr); |
470 |
return;
|
471 |
} |
472 |
} |
473 |
|
474 |
static CPUReadMemoryFunc *omap_i2c_readfn[] = {
|
475 |
omap_badwidth_read16, |
476 |
omap_i2c_read, |
477 |
omap_badwidth_read16, |
478 |
}; |
479 |
|
480 |
static CPUWriteMemoryFunc *omap_i2c_writefn[] = {
|
481 |
omap_i2c_writeb, /* Only the last fifo write can be 8 bit. */
|
482 |
omap_i2c_write, |
483 |
omap_badwidth_write16, |
484 |
}; |
485 |
|
486 |
struct omap_i2c_s *omap_i2c_init(target_phys_addr_t base,
|
487 |
qemu_irq irq, qemu_irq *dma, omap_clk clk) |
488 |
{ |
489 |
int iomemtype;
|
490 |
struct omap_i2c_s *s = (struct omap_i2c_s *) |
491 |
qemu_mallocz(sizeof(struct omap_i2c_s)); |
492 |
|
493 |
/* TODO: set a value greater or equal to real hardware */
|
494 |
s->revision = 0x11;
|
495 |
s->base = base; |
496 |
s->irq = irq; |
497 |
s->drq[0] = dma[0]; |
498 |
s->drq[1] = dma[1]; |
499 |
s->slave.event = omap_i2c_event; |
500 |
s->slave.recv = omap_i2c_rx; |
501 |
s->slave.send = omap_i2c_tx; |
502 |
s->bus = i2c_init_bus(); |
503 |
omap_i2c_reset(s); |
504 |
|
505 |
iomemtype = cpu_register_io_memory(0, omap_i2c_readfn,
|
506 |
omap_i2c_writefn, s); |
507 |
cpu_register_physical_memory(s->base, 0x800, iomemtype);
|
508 |
|
509 |
return s;
|
510 |
} |
511 |
|
512 |
struct omap_i2c_s *omap2_i2c_init(struct omap_target_agent_s *ta, |
513 |
qemu_irq irq, qemu_irq *dma, omap_clk fclk, omap_clk iclk) |
514 |
{ |
515 |
int iomemtype;
|
516 |
struct omap_i2c_s *s = (struct omap_i2c_s *) |
517 |
qemu_mallocz(sizeof(struct omap_i2c_s)); |
518 |
|
519 |
s->revision = 0x34;
|
520 |
s->irq = irq; |
521 |
s->drq[0] = dma[0]; |
522 |
s->drq[1] = dma[1]; |
523 |
s->slave.event = omap_i2c_event; |
524 |
s->slave.recv = omap_i2c_rx; |
525 |
s->slave.send = omap_i2c_tx; |
526 |
s->bus = i2c_init_bus(); |
527 |
omap_i2c_reset(s); |
528 |
|
529 |
iomemtype = l4_register_io_memory(0, omap_i2c_readfn,
|
530 |
omap_i2c_writefn, s); |
531 |
s->base = omap_l4_attach(ta, 0, iomemtype);
|
532 |
|
533 |
return s;
|
534 |
} |
535 |
|
536 |
i2c_bus *omap_i2c_bus(struct omap_i2c_s *s)
|
537 |
{ |
538 |
return s->bus;
|
539 |
} |