Archipelago » qemu

/* 

 * Arm PrimeCell PL080/PL081 DMA controller

 *

 * Copyright (c) 2006 CodeSourcery.

 * Written by Paul Brook

 *

 * This code is licenced under the GPL.

 */

#include "vl.h"

#define PL080_MAX_CHANNELS 8

#define PL080_CONF_E    0x1

#define PL080_CONF_M1   0x2

#define PL080_CONF_M2   0x4

#define PL080_CCONF_H   0x40000

#define PL080_CCONF_A   0x20000

#define PL080_CCONF_L   0x10000

#define PL080_CCONF_ITC 0x08000

#define PL080_CCONF_IE  0x04000

#define PL080_CCONF_E   0x00001

#define PL080_CCTRL_I   0x80000000

#define PL080_CCTRL_DI  0x08000000

#define PL080_CCTRL_SI  0x04000000

#define PL080_CCTRL_D   0x02000000

#define PL080_CCTRL_S   0x01000000

typedef struct {

    uint32_t src;

    uint32_t dest;

    uint32_t lli;

    uint32_t ctrl;

    uint32_t conf;

} pl080_channel;

typedef struct {

    uint32_t base;

    uint8_t tc_int;

    uint8_t tc_mask;

    uint8_t err_int;

    uint8_t err_mask;

    uint32_t conf;

    uint32_t sync;

    uint32_t req_single;

    uint32_t req_burst;

    pl080_channel chan[PL080_MAX_CHANNELS];

    int nchannels;

    /* Flag to avoid recursive DMA invocations.  */

    int running;

    void *pic;

    int irq;

} pl080_state;

static const unsigned char pl080_id[] =

{ 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };

static const unsigned char pl081_id[] =

{ 0x81, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };

static void pl080_update(pl080_state *s)

{

    if ((s->tc_int & s->tc_mask)

            || (s->err_int & s->err_mask))

        pic_set_irq_new(s->pic, s->irq, 1);

    else

        pic_set_irq_new(s->pic, s->irq, 1);

}

static void pl080_run(pl080_state *s)

{

    int c;

    int flow;

    pl080_channel *ch;

    int swidth;

    int dwidth;

    int xsize;

    int n;

    int src_id;

    int dest_id;

    int size;

    char buff[4];

    uint32_t req;

    s->tc_mask = 0;

    for (c = 0; c < s->nchannels; c++) {

        if (s->chan[c].conf & PL080_CCONF_ITC)

            s->tc_mask |= 1 << c;

        if (s->chan[c].conf & PL080_CCONF_IE)

            s->err_mask |= 1 << c;

    }

    if ((s->conf & PL080_CONF_E) == 0)

        return;

cpu_abort(cpu_single_env, "DMA active\n");

    /* If we are already in the middle of a DMA operation then indicate that

       there may be new DMA requests and return immediately.  */

    if (s->running) {

        s->running++;

        return;

    }

    s->running = 1;

    while (s->running) {

        for (c = 0; c < s->nchannels; c++) {

            ch = &s->chan[c];

again:

            /* Test if thiws channel has any pending DMA requests.  */

            if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E))

                    != PL080_CCONF_E)

                continue;

            flow = (ch->conf >> 11) & 7;

            if (flow >= 4) {

                cpu_abort(cpu_single_env, 

                    "pl080_run: Peripheral flow control not implemented\n");

            }

            src_id = (ch->conf >> 1) & 0x1f;

            dest_id = (ch->conf >> 6) & 0x1f;

            size = ch->ctrl & 0xfff;

            req = s->req_single | s->req_burst;

            switch (flow) {

            case 0:

                break;

            case 1:

                if ((req & (1u << dest_id)) == 0)

                    size = 0;

                break;

            case 2:

                if ((req & (1u << src_id)) == 0)

                    size = 0;

                break;

            case 3:

                if ((req & (1u << src_id)) == 0

                        || (req & (1u << dest_id)) == 0)

                    size = 0;

                break;

            }

            if (!size)

                continue;

            /* Transfer one element.  */

            /* ??? Should transfer multiple elements for a burst request.  */

            /* ??? Unclear what the proper behavior is when source and

               destination widths are different.  */

            swidth = 1 << ((ch->ctrl >> 18) & 7);

            dwidth = 1 << ((ch->ctrl >> 21) & 7);

            for (n = 0; n < dwidth; n+= swidth) {

                cpu_physical_memory_read(ch->src, buff + n, swidth);

                if (ch->ctrl & PL080_CCTRL_SI)

                    ch->src += swidth;

            }

            xsize = (dwidth < swidth) ? swidth : dwidth;

            /* ??? This may pad the value incorrectly for dwidth < 32.  */

            for (n = 0; n < xsize; n += dwidth) {

                cpu_physical_memory_write(ch->dest + n, buff + n, dwidth);

                if (ch->ctrl & PL080_CCTRL_DI)

                    ch->dest += swidth;

            }

            size--;

            ch->ctrl = (ch->ctrl & 0xfffff000) | size;

            if (size == 0) {

                /* Transfer complete.  */

                if (ch->lli) {

                    ch->src = ldl_phys(ch->lli);

                    ch->dest = ldl_phys(ch->lli + 4);

                    ch->ctrl = ldl_phys(ch->lli + 12);

                    ch->lli = ldl_phys(ch->lli + 8);

                } else {

                    ch->conf &= ~PL080_CCONF_E;

                }

                if (ch->ctrl & PL080_CCTRL_I) {

                    s->tc_int |= 1 << c;

                }

            }

            goto again;

        }

        if (--s->running)

            s->running = 1;

    }

}

static uint32_t pl080_read(void *opaque, target_phys_addr_t offset)

{

    pl080_state *s = (pl080_state *)opaque;

    uint32_t i;

    uint32_t mask;

    offset -= s->base;

    if (offset >= 0xfe0 && offset < 0x1000) {

        if (s->nchannels == 8) {

            return pl080_id[(offset - 0xfe0) >> 2];

        } else {

            return pl081_id[(offset - 0xfe0) >> 2];

        }

    }

    if (offset >= 0x100 && offset < 0x200) {

        i = (offset & 0xe0) >> 5;

        if (i >= s->nchannels)

            goto bad_offset;

        switch (offset >> 2) {

        case 0: /* SrcAddr */

            return s->chan[i].src;

        case 1: /* DestAddr */

            return s->chan[i].dest;

        case 2: /* LLI */

            return s->chan[i].lli;

        case 3: /* Control */

            return s->chan[i].ctrl;

        case 4: /* Configuration */

            return s->chan[i].conf;

        default:

            goto bad_offset;

        }

    }

    switch (offset >> 2) {

    case 0: /* IntStatus */

        return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask);

    case 1: /* IntTCStatus */

        return (s->tc_int & s->tc_mask);

    case 3: /* IntErrorStatus */

        return (s->err_int & s->err_mask);

    case 5: /* RawIntTCStatus */

        return s->tc_int;

    case 6: /* RawIntErrorStatus */

        return s->err_int;

    case 7: /* EnbldChns */

        mask = 0;

        for (i = 0; i < s->nchannels; i++) {

            if (s->chan[i].conf & PL080_CCONF_E)

                mask |= 1 << i;

        }

        return mask;

    case 8: /* SoftBReq */

    case 9: /* SoftSReq */

    case 10: /* SoftLBReq */

    case 11: /* SoftLSReq */

        /* ??? Implement these. */

        return 0;

    case 12: /* Configuration */

        return s->conf;

    case 13: /* Sync */

        return s->sync;

    default:

    bad_offset:

        cpu_abort(cpu_single_env, "pl080_read: Bad offset %x\n", offset);

        return 0;

    }

}

static void pl080_write(void *opaque, target_phys_addr_t offset,

                          uint32_t value)

{

    pl080_state *s = (pl080_state *)opaque;

    int i;

    offset -= s->base;

    if (offset >= 0x100 && offset < 0x200) {

        i = (offset & 0xe0) >> 5;

        if (i >= s->nchannels)

            goto bad_offset;

        switch (offset >> 2) {

        case 0: /* SrcAddr */

            s->chan[i].src = value;

            break;

        case 1: /* DestAddr */

            s->chan[i].dest = value;

            break;

        case 2: /* LLI */

            s->chan[i].lli = value;

            break;

        case 3: /* Control */

            s->chan[i].ctrl = value;

            break;

        case 4: /* Configuration */

            s->chan[i].conf = value;

            pl080_run(s);

            break;

        }

    }

    switch (offset >> 2) {

    case 2: /* IntTCClear */

        s->tc_int &= ~value;

        break;

    case 4: /* IntErrorClear */

        s->err_int &= ~value;

        break;

    case 8: /* SoftBReq */

    case 9: /* SoftSReq */

    case 10: /* SoftLBReq */

    case 11: /* SoftLSReq */

        /* ??? Implement these.  */

        cpu_abort(cpu_single_env, "pl080_write: Soft DMA not implemented\n");

        break;

    case 12: /* Configuration */

        s->conf = value;

        if (s->conf & (PL080_CONF_M1 | PL080_CONF_M1)) {

            cpu_abort(cpu_single_env,

                      "pl080_write: Big-endian DMA not implemented\n");

        }

        pl080_run(s);

        break;

    case 13: /* Sync */

        s->sync = value;

        break;

    default:

    bad_offset:

        cpu_abort(cpu_single_env, "pl080_write: Bad offset %x\n", offset);

    }

    pl080_update(s);

}

static CPUReadMemoryFunc *pl080_readfn[] = {

   pl080_read,

   pl080_read,

   pl080_read

};

static CPUWriteMemoryFunc *pl080_writefn[] = {

   pl080_write,

   pl080_write,

   pl080_write

};

/* The PL080 and PL081 are the same except for the number of channels

   they implement (8 and 2 respectively).  */

void *pl080_init(uint32_t base, void *pic, int irq, int nchannels)

{

    int iomemtype;

    pl080_state *s;

    s = (pl080_state *)qemu_mallocz(sizeof(pl080_state));

    iomemtype = cpu_register_io_memory(0, pl080_readfn,

                                       pl080_writefn, s);

    cpu_register_physical_memory(base, 0x00000fff, iomemtype);

    s->base = base;

    s->pic = pic;

    s->irq = irq;

    s->nchannels = nchannels;

    /* ??? Save/restore.  */

    return s;

}