Archipelago » qemu

/*

 * ARM PrimeCell Timer modules.

 *

 * Copyright (c) 2005-2006 CodeSourcery.

 * Written by Paul Brook

 *

 * This code is licenced under the GPL.

 */

#include "sysbus.h"

#include "qemu-timer.h"

/* Common timer implementation.  */

#define TIMER_CTRL_ONESHOT      (1 << 0)

#define TIMER_CTRL_32BIT        (1 << 1)

#define TIMER_CTRL_DIV1         (0 << 2)

#define TIMER_CTRL_DIV16        (1 << 2)

#define TIMER_CTRL_DIV256       (2 << 2)

#define TIMER_CTRL_IE           (1 << 5)

#define TIMER_CTRL_PERIODIC     (1 << 6)

#define TIMER_CTRL_ENABLE       (1 << 7)

typedef struct {

    ptimer_state *timer;

    uint32_t control;

    uint32_t limit;

    int freq;

    int int_level;

    qemu_irq irq;

} arm_timer_state;

/* Check all active timers, and schedule the next timer interrupt.  */

static void arm_timer_update(arm_timer_state *s)

{

    /* Update interrupts.  */

    if (s->int_level && (s->control & TIMER_CTRL_IE)) {

        qemu_irq_raise(s->irq);

    } else {

        qemu_irq_lower(s->irq);

    }

}

static uint32_t arm_timer_read(void *opaque, target_phys_addr_t offset)

{

    arm_timer_state *s = (arm_timer_state *)opaque;

    switch (offset >> 2) {

    case 0: /* TimerLoad */

    case 6: /* TimerBGLoad */

        return s->limit;

    case 1: /* TimerValue */

        return ptimer_get_count(s->timer);

    case 2: /* TimerControl */

        return s->control;

    case 4: /* TimerRIS */

        return s->int_level;

    case 5: /* TimerMIS */

        if ((s->control & TIMER_CTRL_IE) == 0)

            return 0;

        return s->int_level;

    default:

        hw_error("arm_timer_read: Bad offset %x\n", (int)offset);

        return 0;

    }

}

/* Reset the timer limit after settings have changed.  */

static void arm_timer_recalibrate(arm_timer_state *s, int reload)

{

    uint32_t limit;

    if ((s->control & (TIMER_CTRL_PERIODIC | TIMER_CTRL_ONESHOT)) == 0) {

        /* Free running.  */

        if (s->control & TIMER_CTRL_32BIT)

            limit = 0xffffffff;

        else

            limit = 0xffff;

    } else {

          /* Periodic.  */

          limit = s->limit;

    }

    ptimer_set_limit(s->timer, limit, reload);

}

static void arm_timer_write(void *opaque, target_phys_addr_t offset,

                            uint32_t value)

{

    arm_timer_state *s = (arm_timer_state *)opaque;

    int freq;

    switch (offset >> 2) {

    case 0: /* TimerLoad */

        s->limit = value;

        arm_timer_recalibrate(s, 1);

        break;

    case 1: /* TimerValue */

        /* ??? Linux seems to want to write to this readonly register.

           Ignore it.  */

        break;

    case 2: /* TimerControl */

        if (s->control & TIMER_CTRL_ENABLE) {

            /* Pause the timer if it is running.  This may cause some

               inaccuracy dure to rounding, but avoids a whole lot of other

               messyness.  */

            ptimer_stop(s->timer);

        }

        s->control = value;

        freq = s->freq;

        /* ??? Need to recalculate expiry time after changing divisor.  */

        switch ((value >> 2) & 3) {

        case 1: freq >>= 4; break;

        case 2: freq >>= 8; break;

        }

        arm_timer_recalibrate(s, s->control & TIMER_CTRL_ENABLE);

        ptimer_set_freq(s->timer, freq);

        if (s->control & TIMER_CTRL_ENABLE) {

            /* Restart the timer if still enabled.  */

            ptimer_run(s->timer, (s->control & TIMER_CTRL_ONESHOT) != 0);

        }

        break;

    case 3: /* TimerIntClr */

        s->int_level = 0;

        break;

    case 6: /* TimerBGLoad */

        s->limit = value;

        arm_timer_recalibrate(s, 0);

        break;

    default:

        hw_error("arm_timer_write: Bad offset %x\n", (int)offset);

    }

    arm_timer_update(s);

}

static void arm_timer_tick(void *opaque)

{

    arm_timer_state *s = (arm_timer_state *)opaque;

    s->int_level = 1;

    arm_timer_update(s);

}

static void arm_timer_save(QEMUFile *f, void *opaque)

{

    arm_timer_state *s = (arm_timer_state *)opaque;

    qemu_put_be32(f, s->control);

    qemu_put_be32(f, s->limit);

    qemu_put_be32(f, s->int_level);

    qemu_put_ptimer(f, s->timer);

}

static int arm_timer_load(QEMUFile *f, void *opaque, int version_id)

{

    arm_timer_state *s = (arm_timer_state *)opaque;

    if (version_id != 1)

        return -EINVAL;

    s->control = qemu_get_be32(f);

    s->limit = qemu_get_be32(f);

    s->int_level = qemu_get_be32(f);

    qemu_get_ptimer(f, s->timer);

    return 0;

}

static arm_timer_state *arm_timer_init(uint32_t freq)

{

    arm_timer_state *s;

    QEMUBH *bh;

    s = (arm_timer_state *)qemu_mallocz(sizeof(arm_timer_state));

    s->freq = freq;

    s->control = TIMER_CTRL_IE;

    bh = qemu_bh_new(arm_timer_tick, s);

    s->timer = ptimer_init(bh);

    register_savevm(NULL, "arm_timer", -1, 1, arm_timer_save, arm_timer_load, s);

    return s;

}

/* ARM PrimeCell SP804 dual timer module.

   Docs for this device don't seem to be publicly available.  This

   implementation is based on guesswork, the linux kernel sources and the

   Integrator/CP timer modules.  */

typedef struct {

    SysBusDevice busdev;

    arm_timer_state *timer[2];

    int level[2];

    qemu_irq irq;

} sp804_state;

/* Merge the IRQs from the two component devices.  */

static void sp804_set_irq(void *opaque, int irq, int level)

{

    sp804_state *s = (sp804_state *)opaque;

    s->level[irq] = level;

    qemu_set_irq(s->irq, s->level[0] || s->level[1]);

}

static uint32_t sp804_read(void *opaque, target_phys_addr_t offset)

{

    sp804_state *s = (sp804_state *)opaque;

    /* ??? Don't know the PrimeCell ID for this device.  */

    if (offset < 0x20) {

        return arm_timer_read(s->timer[0], offset);

    } else {

        return arm_timer_read(s->timer[1], offset - 0x20);

    }

}

static void sp804_write(void *opaque, target_phys_addr_t offset,

                        uint32_t value)

{

    sp804_state *s = (sp804_state *)opaque;

    if (offset < 0x20) {

        arm_timer_write(s->timer[0], offset, value);

    } else {

        arm_timer_write(s->timer[1], offset - 0x20, value);

    }

}

static CPUReadMemoryFunc * const sp804_readfn[] = {

   sp804_read,

   sp804_read,

   sp804_read

};

static CPUWriteMemoryFunc * const sp804_writefn[] = {

   sp804_write,

   sp804_write,

   sp804_write

};

static void sp804_save(QEMUFile *f, void *opaque)

{

    sp804_state *s = (sp804_state *)opaque;

    qemu_put_be32(f, s->level[0]);

    qemu_put_be32(f, s->level[1]);

}

static int sp804_load(QEMUFile *f, void *opaque, int version_id)

{

    sp804_state *s = (sp804_state *)opaque;

    if (version_id != 1)

        return -EINVAL;

    s->level[0] = qemu_get_be32(f);

    s->level[1] = qemu_get_be32(f);

    return 0;

}

static int sp804_init(SysBusDevice *dev)

{

    int iomemtype;

    sp804_state *s = FROM_SYSBUS(sp804_state, dev);

    qemu_irq *qi;

    qi = qemu_allocate_irqs(sp804_set_irq, s, 2);

    sysbus_init_irq(dev, &s->irq);

    /* ??? The timers are actually configurable between 32kHz and 1MHz, but

       we don't implement that.  */

    s->timer[0] = arm_timer_init(1000000);

    s->timer[1] = arm_timer_init(1000000);

    s->timer[0]->irq = qi[0];

    s->timer[1]->irq = qi[1];

    iomemtype = cpu_register_io_memory(sp804_readfn,

                                       sp804_writefn, s);

    sysbus_init_mmio(dev, 0x1000, iomemtype);

    register_savevm(&dev->qdev, "sp804", -1, 1, sp804_save, sp804_load, s);

    return 0;

}

/* Integrator/CP timer module.  */

typedef struct {

    SysBusDevice busdev;

    arm_timer_state *timer[3];

} icp_pit_state;

static uint32_t icp_pit_read(void *opaque, target_phys_addr_t offset)

{

    icp_pit_state *s = (icp_pit_state *)opaque;

    int n;

    /* ??? Don't know the PrimeCell ID for this device.  */

    n = offset >> 8;

    if (n > 3) {

        hw_error("sp804_read: Bad timer %d\n", n);

    }

    return arm_timer_read(s->timer[n], offset & 0xff);

}

static void icp_pit_write(void *opaque, target_phys_addr_t offset,

                          uint32_t value)

{

    icp_pit_state *s = (icp_pit_state *)opaque;

    int n;

    n = offset >> 8;

    if (n > 3) {

        hw_error("sp804_write: Bad timer %d\n", n);

    }

    arm_timer_write(s->timer[n], offset & 0xff, value);

}

static CPUReadMemoryFunc * const icp_pit_readfn[] = {

   icp_pit_read,

   icp_pit_read,

   icp_pit_read

};

static CPUWriteMemoryFunc * const icp_pit_writefn[] = {

   icp_pit_write,

   icp_pit_write,

   icp_pit_write

};

static int icp_pit_init(SysBusDevice *dev)

{

    int iomemtype;

    icp_pit_state *s = FROM_SYSBUS(icp_pit_state, dev);

    /* Timer 0 runs at the system clock speed (40MHz).  */

    s->timer[0] = arm_timer_init(40000000);

    /* The other two timers run at 1MHz.  */

    s->timer[1] = arm_timer_init(1000000);

    s->timer[2] = arm_timer_init(1000000);

    sysbus_init_irq(dev, &s->timer[0]->irq);

    sysbus_init_irq(dev, &s->timer[1]->irq);

    sysbus_init_irq(dev, &s->timer[2]->irq);

    iomemtype = cpu_register_io_memory(icp_pit_readfn,

                                       icp_pit_writefn, s);

    sysbus_init_mmio(dev, 0x1000, iomemtype);

    /* This device has no state to save/restore.  The component timers will

       save themselves.  */

    return 0;

}

static void arm_timer_register_devices(void)

{

    sysbus_register_dev("integrator_pit", sizeof(icp_pit_state), icp_pit_init);

    sysbus_register_dev("sp804", sizeof(sp804_state), sp804_init);

}

device_init(arm_timer_register_devices)