root / hw / pflash_cfi02.c @ a8a358bf
History | View | Annotate | Download (19.1 kB)
1 |
/*
|
---|---|
2 |
* CFI parallel flash with AMD command set emulation
|
3 |
*
|
4 |
* Copyright (c) 2005 Jocelyn Mayer
|
5 |
*
|
6 |
* This library is free software; you can redistribute it and/or
|
7 |
* modify it under the terms of the GNU Lesser General Public
|
8 |
* License as published by the Free Software Foundation; either
|
9 |
* version 2 of the License, or (at your option) any later version.
|
10 |
*
|
11 |
* This library is distributed in the hope that it will be useful,
|
12 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
13 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
14 |
* Lesser General Public License for more details.
|
15 |
*
|
16 |
* You should have received a copy of the GNU Lesser General Public
|
17 |
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
|
18 |
*/
|
19 |
|
20 |
/*
|
21 |
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
22 |
* Supported commands/modes are:
|
23 |
* - flash read
|
24 |
* - flash write
|
25 |
* - flash ID read
|
26 |
* - sector erase
|
27 |
* - chip erase
|
28 |
* - unlock bypass command
|
29 |
* - CFI queries
|
30 |
*
|
31 |
* It does not support flash interleaving.
|
32 |
* It does not implement boot blocs with reduced size
|
33 |
* It does not implement software data protection as found in many real chips
|
34 |
* It does not implement erase suspend/resume commands
|
35 |
* It does not implement multiple sectors erase
|
36 |
*/
|
37 |
|
38 |
#include "hw.h" |
39 |
#include "flash.h" |
40 |
#include "qemu-timer.h" |
41 |
#include "block.h" |
42 |
|
43 |
//#define PFLASH_DEBUG
|
44 |
#ifdef PFLASH_DEBUG
|
45 |
#define DPRINTF(fmt, ...) \
|
46 |
do { \
|
47 |
printf("PFLASH: " fmt , ## __VA_ARGS__); \ |
48 |
} while (0) |
49 |
#else
|
50 |
#define DPRINTF(fmt, ...) do { } while (0) |
51 |
#endif
|
52 |
|
53 |
struct pflash_t {
|
54 |
BlockDriverState *bs; |
55 |
target_phys_addr_t base; |
56 |
uint32_t sector_len; |
57 |
uint32_t chip_len; |
58 |
int mappings;
|
59 |
int width;
|
60 |
int wcycle; /* if 0, the flash is read normally */ |
61 |
int bypass;
|
62 |
int ro;
|
63 |
uint8_t cmd; |
64 |
uint8_t status; |
65 |
uint16_t ident[4];
|
66 |
uint16_t unlock_addr[2];
|
67 |
uint8_t cfi_len; |
68 |
uint8_t cfi_table[0x52];
|
69 |
QEMUTimer *timer; |
70 |
ram_addr_t off; |
71 |
int fl_mem;
|
72 |
int rom_mode;
|
73 |
void *storage;
|
74 |
}; |
75 |
|
76 |
static void pflash_register_memory(pflash_t *pfl, int rom_mode) |
77 |
{ |
78 |
unsigned long phys_offset = pfl->fl_mem; |
79 |
int i;
|
80 |
|
81 |
if (rom_mode)
|
82 |
phys_offset |= pfl->off | IO_MEM_ROMD; |
83 |
pfl->rom_mode = rom_mode; |
84 |
|
85 |
for (i = 0; i < pfl->mappings; i++) |
86 |
cpu_register_physical_memory(pfl->base + i * pfl->chip_len, |
87 |
pfl->chip_len, phys_offset); |
88 |
} |
89 |
|
90 |
static void pflash_timer (void *opaque) |
91 |
{ |
92 |
pflash_t *pfl = opaque; |
93 |
|
94 |
DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
|
95 |
/* Reset flash */
|
96 |
pfl->status ^= 0x80;
|
97 |
if (pfl->bypass) {
|
98 |
pfl->wcycle = 2;
|
99 |
} else {
|
100 |
pflash_register_memory(pfl, 1);
|
101 |
pfl->wcycle = 0;
|
102 |
} |
103 |
pfl->cmd = 0;
|
104 |
} |
105 |
|
106 |
static uint32_t pflash_read (pflash_t *pfl, uint32_t offset, int width) |
107 |
{ |
108 |
uint32_t boff; |
109 |
uint32_t ret; |
110 |
uint8_t *p; |
111 |
|
112 |
DPRINTF("%s: offset " TARGET_FMT_lx "\n", __func__, offset); |
113 |
ret = -1;
|
114 |
if (pfl->rom_mode) {
|
115 |
/* Lazy reset of to ROMD mode */
|
116 |
if (pfl->wcycle == 0) |
117 |
pflash_register_memory(pfl, 1);
|
118 |
} |
119 |
offset &= pfl->chip_len - 1;
|
120 |
boff = offset & 0xFF;
|
121 |
if (pfl->width == 2) |
122 |
boff = boff >> 1;
|
123 |
else if (pfl->width == 4) |
124 |
boff = boff >> 2;
|
125 |
switch (pfl->cmd) {
|
126 |
default:
|
127 |
/* This should never happen : reset state & treat it as a read*/
|
128 |
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
129 |
pfl->wcycle = 0;
|
130 |
pfl->cmd = 0;
|
131 |
case 0x80: |
132 |
/* We accept reads during second unlock sequence... */
|
133 |
case 0x00: |
134 |
flash_read:
|
135 |
/* Flash area read */
|
136 |
p = pfl->storage; |
137 |
switch (width) {
|
138 |
case 1: |
139 |
ret = p[offset]; |
140 |
// DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
|
141 |
break;
|
142 |
case 2: |
143 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
144 |
ret = p[offset] << 8;
|
145 |
ret |= p[offset + 1];
|
146 |
#else
|
147 |
ret = p[offset]; |
148 |
ret |= p[offset + 1] << 8; |
149 |
#endif
|
150 |
// DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
|
151 |
break;
|
152 |
case 4: |
153 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
154 |
ret = p[offset] << 24;
|
155 |
ret |= p[offset + 1] << 16; |
156 |
ret |= p[offset + 2] << 8; |
157 |
ret |= p[offset + 3];
|
158 |
#else
|
159 |
ret = p[offset]; |
160 |
ret |= p[offset + 1] << 8; |
161 |
ret |= p[offset + 2] << 16; |
162 |
ret |= p[offset + 3] << 24; |
163 |
#endif
|
164 |
// DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
|
165 |
break;
|
166 |
} |
167 |
break;
|
168 |
case 0x90: |
169 |
/* flash ID read */
|
170 |
switch (boff) {
|
171 |
case 0x00: |
172 |
case 0x01: |
173 |
ret = pfl->ident[boff & 0x01];
|
174 |
break;
|
175 |
case 0x02: |
176 |
ret = 0x00; /* Pretend all sectors are unprotected */ |
177 |
break;
|
178 |
case 0x0E: |
179 |
case 0x0F: |
180 |
if (pfl->ident[2 + (boff & 0x01)] == (uint8_t)-1) |
181 |
goto flash_read;
|
182 |
ret = pfl->ident[2 + (boff & 0x01)]; |
183 |
break;
|
184 |
default:
|
185 |
goto flash_read;
|
186 |
} |
187 |
DPRINTF("%s: ID " TARGET_FMT_ld " %x\n", __func__, boff, ret); |
188 |
break;
|
189 |
case 0xA0: |
190 |
case 0x10: |
191 |
case 0x30: |
192 |
/* Status register read */
|
193 |
ret = pfl->status; |
194 |
DPRINTF("%s: status %x\n", __func__, ret);
|
195 |
/* Toggle bit 6 */
|
196 |
pfl->status ^= 0x40;
|
197 |
break;
|
198 |
case 0x98: |
199 |
/* CFI query mode */
|
200 |
if (boff > pfl->cfi_len)
|
201 |
ret = 0;
|
202 |
else
|
203 |
ret = pfl->cfi_table[boff]; |
204 |
break;
|
205 |
} |
206 |
|
207 |
return ret;
|
208 |
} |
209 |
|
210 |
/* update flash content on disk */
|
211 |
static void pflash_update(pflash_t *pfl, int offset, |
212 |
int size)
|
213 |
{ |
214 |
int offset_end;
|
215 |
if (pfl->bs) {
|
216 |
offset_end = offset + size; |
217 |
/* round to sectors */
|
218 |
offset = offset >> 9;
|
219 |
offset_end = (offset_end + 511) >> 9; |
220 |
bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
|
221 |
offset_end - offset); |
222 |
} |
223 |
} |
224 |
|
225 |
static void pflash_write (pflash_t *pfl, uint32_t offset, uint32_t value, |
226 |
int width)
|
227 |
{ |
228 |
uint32_t boff; |
229 |
uint8_t *p; |
230 |
uint8_t cmd; |
231 |
|
232 |
cmd = value; |
233 |
if (pfl->cmd != 0xA0 && cmd == 0xF0) { |
234 |
#if 0
|
235 |
DPRINTF("%s: flash reset asked (%02x %02x)\n",
|
236 |
__func__, pfl->cmd, cmd);
|
237 |
#endif
|
238 |
goto reset_flash;
|
239 |
} |
240 |
DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d %d\n", __func__, |
241 |
offset, value, width, pfl->wcycle); |
242 |
offset &= pfl->chip_len - 1;
|
243 |
|
244 |
DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d\n", __func__, |
245 |
offset, value, width); |
246 |
boff = offset & (pfl->sector_len - 1);
|
247 |
if (pfl->width == 2) |
248 |
boff = boff >> 1;
|
249 |
else if (pfl->width == 4) |
250 |
boff = boff >> 2;
|
251 |
switch (pfl->wcycle) {
|
252 |
case 0: |
253 |
/* Set the device in I/O access mode if required */
|
254 |
if (pfl->rom_mode)
|
255 |
pflash_register_memory(pfl, 0);
|
256 |
/* We're in read mode */
|
257 |
check_unlock0:
|
258 |
if (boff == 0x55 && cmd == 0x98) { |
259 |
enter_CFI_mode:
|
260 |
/* Enter CFI query mode */
|
261 |
pfl->wcycle = 7;
|
262 |
pfl->cmd = 0x98;
|
263 |
return;
|
264 |
} |
265 |
if (boff != pfl->unlock_addr[0] || cmd != 0xAA) { |
266 |
DPRINTF("%s: unlock0 failed " TARGET_FMT_lx " %02x %04x\n", |
267 |
__func__, boff, cmd, pfl->unlock_addr[0]);
|
268 |
goto reset_flash;
|
269 |
} |
270 |
DPRINTF("%s: unlock sequence started\n", __func__);
|
271 |
break;
|
272 |
case 1: |
273 |
/* We started an unlock sequence */
|
274 |
check_unlock1:
|
275 |
if (boff != pfl->unlock_addr[1] || cmd != 0x55) { |
276 |
DPRINTF("%s: unlock1 failed " TARGET_FMT_lx " %02x\n", __func__, |
277 |
boff, cmd); |
278 |
goto reset_flash;
|
279 |
} |
280 |
DPRINTF("%s: unlock sequence done\n", __func__);
|
281 |
break;
|
282 |
case 2: |
283 |
/* We finished an unlock sequence */
|
284 |
if (!pfl->bypass && boff != pfl->unlock_addr[0]) { |
285 |
DPRINTF("%s: command failed " TARGET_FMT_lx " %02x\n", __func__, |
286 |
boff, cmd); |
287 |
goto reset_flash;
|
288 |
} |
289 |
switch (cmd) {
|
290 |
case 0x20: |
291 |
pfl->bypass = 1;
|
292 |
goto do_bypass;
|
293 |
case 0x80: |
294 |
case 0x90: |
295 |
case 0xA0: |
296 |
pfl->cmd = cmd; |
297 |
DPRINTF("%s: starting command %02x\n", __func__, cmd);
|
298 |
break;
|
299 |
default:
|
300 |
DPRINTF("%s: unknown command %02x\n", __func__, cmd);
|
301 |
goto reset_flash;
|
302 |
} |
303 |
break;
|
304 |
case 3: |
305 |
switch (pfl->cmd) {
|
306 |
case 0x80: |
307 |
/* We need another unlock sequence */
|
308 |
goto check_unlock0;
|
309 |
case 0xA0: |
310 |
DPRINTF("%s: write data offset " TARGET_FMT_lx " %08x %d\n", |
311 |
__func__, offset, value, width); |
312 |
p = pfl->storage; |
313 |
switch (width) {
|
314 |
case 1: |
315 |
p[offset] &= value; |
316 |
pflash_update(pfl, offset, 1);
|
317 |
break;
|
318 |
case 2: |
319 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
320 |
p[offset] &= value >> 8;
|
321 |
p[offset + 1] &= value;
|
322 |
#else
|
323 |
p[offset] &= value; |
324 |
p[offset + 1] &= value >> 8; |
325 |
#endif
|
326 |
pflash_update(pfl, offset, 2);
|
327 |
break;
|
328 |
case 4: |
329 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
330 |
p[offset] &= value >> 24;
|
331 |
p[offset + 1] &= value >> 16; |
332 |
p[offset + 2] &= value >> 8; |
333 |
p[offset + 3] &= value;
|
334 |
#else
|
335 |
p[offset] &= value; |
336 |
p[offset + 1] &= value >> 8; |
337 |
p[offset + 2] &= value >> 16; |
338 |
p[offset + 3] &= value >> 24; |
339 |
#endif
|
340 |
pflash_update(pfl, offset, 4);
|
341 |
break;
|
342 |
} |
343 |
pfl->status = 0x00 | ~(value & 0x80); |
344 |
/* Let's pretend write is immediate */
|
345 |
if (pfl->bypass)
|
346 |
goto do_bypass;
|
347 |
goto reset_flash;
|
348 |
case 0x90: |
349 |
if (pfl->bypass && cmd == 0x00) { |
350 |
/* Unlock bypass reset */
|
351 |
goto reset_flash;
|
352 |
} |
353 |
/* We can enter CFI query mode from autoselect mode */
|
354 |
if (boff == 0x55 && cmd == 0x98) |
355 |
goto enter_CFI_mode;
|
356 |
/* No break here */
|
357 |
default:
|
358 |
DPRINTF("%s: invalid write for command %02x\n",
|
359 |
__func__, pfl->cmd); |
360 |
goto reset_flash;
|
361 |
} |
362 |
case 4: |
363 |
switch (pfl->cmd) {
|
364 |
case 0xA0: |
365 |
/* Ignore writes while flash data write is occuring */
|
366 |
/* As we suppose write is immediate, this should never happen */
|
367 |
return;
|
368 |
case 0x80: |
369 |
goto check_unlock1;
|
370 |
default:
|
371 |
/* Should never happen */
|
372 |
DPRINTF("%s: invalid command state %02x (wc 4)\n",
|
373 |
__func__, pfl->cmd); |
374 |
goto reset_flash;
|
375 |
} |
376 |
break;
|
377 |
case 5: |
378 |
switch (cmd) {
|
379 |
case 0x10: |
380 |
if (boff != pfl->unlock_addr[0]) { |
381 |
DPRINTF("%s: chip erase: invalid address " TARGET_FMT_lx "\n", |
382 |
__func__, offset); |
383 |
goto reset_flash;
|
384 |
} |
385 |
/* Chip erase */
|
386 |
DPRINTF("%s: start chip erase\n", __func__);
|
387 |
memset(pfl->storage, 0xFF, pfl->chip_len);
|
388 |
pfl->status = 0x00;
|
389 |
pflash_update(pfl, 0, pfl->chip_len);
|
390 |
/* Let's wait 5 seconds before chip erase is done */
|
391 |
qemu_mod_timer(pfl->timer, |
392 |
qemu_get_clock(vm_clock) + (ticks_per_sec * 5));
|
393 |
break;
|
394 |
case 0x30: |
395 |
/* Sector erase */
|
396 |
p = pfl->storage; |
397 |
offset &= ~(pfl->sector_len - 1);
|
398 |
DPRINTF("%s: start sector erase at " TARGET_FMT_lx "\n", __func__, |
399 |
offset); |
400 |
memset(p + offset, 0xFF, pfl->sector_len);
|
401 |
pflash_update(pfl, offset, pfl->sector_len); |
402 |
pfl->status = 0x00;
|
403 |
/* Let's wait 1/2 second before sector erase is done */
|
404 |
qemu_mod_timer(pfl->timer, |
405 |
qemu_get_clock(vm_clock) + (ticks_per_sec / 2));
|
406 |
break;
|
407 |
default:
|
408 |
DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
|
409 |
goto reset_flash;
|
410 |
} |
411 |
pfl->cmd = cmd; |
412 |
break;
|
413 |
case 6: |
414 |
switch (pfl->cmd) {
|
415 |
case 0x10: |
416 |
/* Ignore writes during chip erase */
|
417 |
return;
|
418 |
case 0x30: |
419 |
/* Ignore writes during sector erase */
|
420 |
return;
|
421 |
default:
|
422 |
/* Should never happen */
|
423 |
DPRINTF("%s: invalid command state %02x (wc 6)\n",
|
424 |
__func__, pfl->cmd); |
425 |
goto reset_flash;
|
426 |
} |
427 |
break;
|
428 |
case 7: /* Special value for CFI queries */ |
429 |
DPRINTF("%s: invalid write in CFI query mode\n", __func__);
|
430 |
goto reset_flash;
|
431 |
default:
|
432 |
/* Should never happen */
|
433 |
DPRINTF("%s: invalid write state (wc 7)\n", __func__);
|
434 |
goto reset_flash;
|
435 |
} |
436 |
pfl->wcycle++; |
437 |
|
438 |
return;
|
439 |
|
440 |
/* Reset flash */
|
441 |
reset_flash:
|
442 |
pfl->bypass = 0;
|
443 |
pfl->wcycle = 0;
|
444 |
pfl->cmd = 0;
|
445 |
return;
|
446 |
|
447 |
do_bypass:
|
448 |
pfl->wcycle = 2;
|
449 |
pfl->cmd = 0;
|
450 |
return;
|
451 |
} |
452 |
|
453 |
|
454 |
static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr) |
455 |
{ |
456 |
return pflash_read(opaque, addr, 1); |
457 |
} |
458 |
|
459 |
static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr) |
460 |
{ |
461 |
pflash_t *pfl = opaque; |
462 |
|
463 |
return pflash_read(pfl, addr, 2); |
464 |
} |
465 |
|
466 |
static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr) |
467 |
{ |
468 |
pflash_t *pfl = opaque; |
469 |
|
470 |
return pflash_read(pfl, addr, 4); |
471 |
} |
472 |
|
473 |
static void pflash_writeb (void *opaque, target_phys_addr_t addr, |
474 |
uint32_t value) |
475 |
{ |
476 |
pflash_write(opaque, addr, value, 1);
|
477 |
} |
478 |
|
479 |
static void pflash_writew (void *opaque, target_phys_addr_t addr, |
480 |
uint32_t value) |
481 |
{ |
482 |
pflash_t *pfl = opaque; |
483 |
|
484 |
pflash_write(pfl, addr, value, 2);
|
485 |
} |
486 |
|
487 |
static void pflash_writel (void *opaque, target_phys_addr_t addr, |
488 |
uint32_t value) |
489 |
{ |
490 |
pflash_t *pfl = opaque; |
491 |
|
492 |
pflash_write(pfl, addr, value, 4);
|
493 |
} |
494 |
|
495 |
static CPUWriteMemoryFunc * const pflash_write_ops[] = { |
496 |
&pflash_writeb, |
497 |
&pflash_writew, |
498 |
&pflash_writel, |
499 |
}; |
500 |
|
501 |
static CPUReadMemoryFunc * const pflash_read_ops[] = { |
502 |
&pflash_readb, |
503 |
&pflash_readw, |
504 |
&pflash_readl, |
505 |
}; |
506 |
|
507 |
/* Count trailing zeroes of a 32 bits quantity */
|
508 |
static int ctz32 (uint32_t n) |
509 |
{ |
510 |
int ret;
|
511 |
|
512 |
ret = 0;
|
513 |
if (!(n & 0xFFFF)) { |
514 |
ret += 16;
|
515 |
n = n >> 16;
|
516 |
} |
517 |
if (!(n & 0xFF)) { |
518 |
ret += 8;
|
519 |
n = n >> 8;
|
520 |
} |
521 |
if (!(n & 0xF)) { |
522 |
ret += 4;
|
523 |
n = n >> 4;
|
524 |
} |
525 |
if (!(n & 0x3)) { |
526 |
ret += 2;
|
527 |
n = n >> 2;
|
528 |
} |
529 |
if (!(n & 0x1)) { |
530 |
ret++; |
531 |
n = n >> 1;
|
532 |
} |
533 |
#if 0 /* This is not necessary as n is never 0 */
|
534 |
if (!n)
|
535 |
ret++;
|
536 |
#endif
|
537 |
|
538 |
return ret;
|
539 |
} |
540 |
|
541 |
pflash_t *pflash_cfi02_register(target_phys_addr_t base, ram_addr_t off, |
542 |
BlockDriverState *bs, uint32_t sector_len, |
543 |
int nb_blocs, int nb_mappings, int width, |
544 |
uint16_t id0, uint16_t id1, |
545 |
uint16_t id2, uint16_t id3, |
546 |
uint16_t unlock_addr0, uint16_t unlock_addr1) |
547 |
{ |
548 |
pflash_t *pfl; |
549 |
int32_t chip_len; |
550 |
|
551 |
chip_len = sector_len * nb_blocs; |
552 |
/* XXX: to be fixed */
|
553 |
#if 0
|
554 |
if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
|
555 |
total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
|
556 |
return NULL;
|
557 |
#endif
|
558 |
pfl = qemu_mallocz(sizeof(pflash_t));
|
559 |
/* FIXME: Allocate ram ourselves. */
|
560 |
pfl->storage = qemu_get_ram_ptr(off); |
561 |
pfl->fl_mem = cpu_register_io_memory(pflash_read_ops, pflash_write_ops, |
562 |
pfl); |
563 |
pfl->off = off; |
564 |
pfl->base = base; |
565 |
pfl->chip_len = chip_len; |
566 |
pfl->mappings = nb_mappings; |
567 |
pflash_register_memory(pfl, 1);
|
568 |
pfl->bs = bs; |
569 |
if (pfl->bs) {
|
570 |
/* read the initial flash content */
|
571 |
bdrv_read(pfl->bs, 0, pfl->storage, chip_len >> 9); |
572 |
} |
573 |
#if 0 /* XXX: there should be a bit to set up read-only,
|
574 |
* the same way the hardware does (with WP pin).
|
575 |
*/
|
576 |
pfl->ro = 1;
|
577 |
#else
|
578 |
pfl->ro = 0;
|
579 |
#endif
|
580 |
pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl); |
581 |
pfl->sector_len = sector_len; |
582 |
pfl->width = width; |
583 |
pfl->wcycle = 0;
|
584 |
pfl->cmd = 0;
|
585 |
pfl->status = 0;
|
586 |
pfl->ident[0] = id0;
|
587 |
pfl->ident[1] = id1;
|
588 |
pfl->ident[2] = id2;
|
589 |
pfl->ident[3] = id3;
|
590 |
pfl->unlock_addr[0] = unlock_addr0;
|
591 |
pfl->unlock_addr[1] = unlock_addr1;
|
592 |
/* Hardcoded CFI table (mostly from SG29 Spansion flash) */
|
593 |
pfl->cfi_len = 0x52;
|
594 |
/* Standard "QRY" string */
|
595 |
pfl->cfi_table[0x10] = 'Q'; |
596 |
pfl->cfi_table[0x11] = 'R'; |
597 |
pfl->cfi_table[0x12] = 'Y'; |
598 |
/* Command set (AMD/Fujitsu) */
|
599 |
pfl->cfi_table[0x13] = 0x02; |
600 |
pfl->cfi_table[0x14] = 0x00; |
601 |
/* Primary extended table address */
|
602 |
pfl->cfi_table[0x15] = 0x31; |
603 |
pfl->cfi_table[0x16] = 0x00; |
604 |
/* Alternate command set (none) */
|
605 |
pfl->cfi_table[0x17] = 0x00; |
606 |
pfl->cfi_table[0x18] = 0x00; |
607 |
/* Alternate extended table (none) */
|
608 |
pfl->cfi_table[0x19] = 0x00; |
609 |
pfl->cfi_table[0x1A] = 0x00; |
610 |
/* Vcc min */
|
611 |
pfl->cfi_table[0x1B] = 0x27; |
612 |
/* Vcc max */
|
613 |
pfl->cfi_table[0x1C] = 0x36; |
614 |
/* Vpp min (no Vpp pin) */
|
615 |
pfl->cfi_table[0x1D] = 0x00; |
616 |
/* Vpp max (no Vpp pin) */
|
617 |
pfl->cfi_table[0x1E] = 0x00; |
618 |
/* Reserved */
|
619 |
pfl->cfi_table[0x1F] = 0x07; |
620 |
/* Timeout for min size buffer write (NA) */
|
621 |
pfl->cfi_table[0x20] = 0x00; |
622 |
/* Typical timeout for block erase (512 ms) */
|
623 |
pfl->cfi_table[0x21] = 0x09; |
624 |
/* Typical timeout for full chip erase (4096 ms) */
|
625 |
pfl->cfi_table[0x22] = 0x0C; |
626 |
/* Reserved */
|
627 |
pfl->cfi_table[0x23] = 0x01; |
628 |
/* Max timeout for buffer write (NA) */
|
629 |
pfl->cfi_table[0x24] = 0x00; |
630 |
/* Max timeout for block erase */
|
631 |
pfl->cfi_table[0x25] = 0x0A; |
632 |
/* Max timeout for chip erase */
|
633 |
pfl->cfi_table[0x26] = 0x0D; |
634 |
/* Device size */
|
635 |
pfl->cfi_table[0x27] = ctz32(chip_len);
|
636 |
/* Flash device interface (8 & 16 bits) */
|
637 |
pfl->cfi_table[0x28] = 0x02; |
638 |
pfl->cfi_table[0x29] = 0x00; |
639 |
/* Max number of bytes in multi-bytes write */
|
640 |
/* XXX: disable buffered write as it's not supported */
|
641 |
// pfl->cfi_table[0x2A] = 0x05;
|
642 |
pfl->cfi_table[0x2A] = 0x00; |
643 |
pfl->cfi_table[0x2B] = 0x00; |
644 |
/* Number of erase block regions (uniform) */
|
645 |
pfl->cfi_table[0x2C] = 0x01; |
646 |
/* Erase block region 1 */
|
647 |
pfl->cfi_table[0x2D] = nb_blocs - 1; |
648 |
pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8; |
649 |
pfl->cfi_table[0x2F] = sector_len >> 8; |
650 |
pfl->cfi_table[0x30] = sector_len >> 16; |
651 |
|
652 |
/* Extended */
|
653 |
pfl->cfi_table[0x31] = 'P'; |
654 |
pfl->cfi_table[0x32] = 'R'; |
655 |
pfl->cfi_table[0x33] = 'I'; |
656 |
|
657 |
pfl->cfi_table[0x34] = '1'; |
658 |
pfl->cfi_table[0x35] = '0'; |
659 |
|
660 |
pfl->cfi_table[0x36] = 0x00; |
661 |
pfl->cfi_table[0x37] = 0x00; |
662 |
pfl->cfi_table[0x38] = 0x00; |
663 |
pfl->cfi_table[0x39] = 0x00; |
664 |
|
665 |
pfl->cfi_table[0x3a] = 0x00; |
666 |
|
667 |
pfl->cfi_table[0x3b] = 0x00; |
668 |
pfl->cfi_table[0x3c] = 0x00; |
669 |
|
670 |
return pfl;
|
671 |
} |