Archipelago » qemu

/*

 * FTDI FT232BM Device emulation

 *

 * Copyright (c) 2006 CodeSourcery.

 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org>

 * Written by Paul Brook, reused for FTDI by Samuel Thibault

 *

 * This code is licensed under the LGPL.

 */

#include "qemu-common.h"

#include "qemu-error.h"

#include "usb.h"

#include "usb-desc.h"

#include "qemu-char.h"

//#define DEBUG_Serial

#ifdef DEBUG_Serial

#define DPRINTF(fmt, ...) \

do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0)

#else

#define DPRINTF(fmt, ...) do {} while(0)

#endif

#define RECV_BUF 384

/* Commands */

#define FTDI_RESET                0

#define FTDI_SET_MDM_CTRL        1

#define FTDI_SET_FLOW_CTRL        2

#define FTDI_SET_BAUD                3

#define FTDI_SET_DATA                4

#define FTDI_GET_MDM_ST                5

#define FTDI_SET_EVENT_CHR        6

#define FTDI_SET_ERROR_CHR        7

#define FTDI_SET_LATENCY        9

#define FTDI_GET_LATENCY        10

#define DeviceOutVendor        ((USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)

#define DeviceInVendor        ((USB_DIR_IN |USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)

/* RESET */

#define FTDI_RESET_SIO        0

#define FTDI_RESET_RX        1

#define FTDI_RESET_TX        2

/* SET_MDM_CTRL */

#define FTDI_DTR        1

#define FTDI_SET_DTR        (FTDI_DTR << 8)

#define FTDI_RTS        2

#define FTDI_SET_RTS        (FTDI_RTS << 8)

/* SET_FLOW_CTRL */

#define FTDI_RTS_CTS_HS                1

#define FTDI_DTR_DSR_HS                2

#define FTDI_XON_XOFF_HS        4

/* SET_DATA */

#define FTDI_PARITY        (0x7 << 8)

#define FTDI_ODD        (0x1 << 8)

#define FTDI_EVEN        (0x2 << 8)

#define FTDI_MARK        (0x3 << 8)

#define FTDI_SPACE        (0x4 << 8)

#define FTDI_STOP        (0x3 << 11)

#define FTDI_STOP1        (0x0 << 11)

#define FTDI_STOP15        (0x1 << 11)

#define FTDI_STOP2        (0x2 << 11)

/* GET_MDM_ST */

/* TODO: should be sent every 40ms */

#define FTDI_CTS  (1<<4)        // CTS line status

#define FTDI_DSR  (1<<5)        // DSR line status

#define FTDI_RI   (1<<6)        // RI line status

#define FTDI_RLSD (1<<7)        // Receive Line Signal Detect

/* Status */

#define FTDI_DR   (1<<0)        // Data Ready

#define FTDI_OE   (1<<1)        // Overrun Err

#define FTDI_PE   (1<<2)        // Parity Err

#define FTDI_FE   (1<<3)        // Framing Err

#define FTDI_BI   (1<<4)        // Break Interrupt

#define FTDI_THRE (1<<5)        // Transmitter Holding Register

#define FTDI_TEMT (1<<6)        // Transmitter Empty

#define FTDI_FIFO (1<<7)        // Error in FIFO

typedef struct {

    USBDevice dev;

    uint8_t recv_buf[RECV_BUF];

    uint16_t recv_ptr;

    uint16_t recv_used;

    uint8_t event_chr;

    uint8_t error_chr;

    uint8_t event_trigger;

    QEMUSerialSetParams params;

    int latency;        /* ms */

    CharDriverState *cs;

} USBSerialState;

enum {

    STR_MANUFACTURER = 1,

    STR_PRODUCT_SERIAL,

    STR_PRODUCT_BRAILLE,

    STR_SERIALNUMBER,

};

static const USBDescStrings desc_strings = {

    [STR_MANUFACTURER]    = "QEMU " QEMU_VERSION,

    [STR_PRODUCT_SERIAL]  = "QEMU USB SERIAL",

    [STR_PRODUCT_BRAILLE] = "QEMU USB BRAILLE",

    [STR_SERIALNUMBER]    = "1",

};

static const USBDescIface desc_iface0 = {

    .bInterfaceNumber              = 0,

    .bNumEndpoints                 = 2,

    .bInterfaceClass               = 0xff,

    .bInterfaceSubClass            = 0xff,

    .bInterfaceProtocol            = 0xff,

    .eps = (USBDescEndpoint[]) {

        {

            .bEndpointAddress      = USB_DIR_IN | 0x01,

            .bmAttributes          = USB_ENDPOINT_XFER_BULK,

            .wMaxPacketSize        = 64,

        },{

            .bEndpointAddress      = USB_DIR_OUT | 0x02,

            .bmAttributes          = USB_ENDPOINT_XFER_BULK,

            .wMaxPacketSize        = 64,

        },

    }

};

static const USBDescDevice desc_device = {

    .bcdUSB                        = 0x0200,

    .bMaxPacketSize0               = 8,

    .bNumConfigurations            = 1,

    .confs = (USBDescConfig[]) {

        {

            .bNumInterfaces        = 1,

            .bConfigurationValue   = 1,

            .bmAttributes          = 0x80,

            .bMaxPower             = 50,

            .nif = 1,

            .ifs = &desc_iface0,

        },

    },

};

static const USBDesc desc_serial = {

    .id = {

        .idVendor          = 0x0403,

        .idProduct         = 0x6001,

        .bcdDevice         = 0x0400,

        .iManufacturer     = STR_MANUFACTURER,

        .iProduct          = STR_PRODUCT_SERIAL,

        .iSerialNumber     = STR_SERIALNUMBER,

    },

    .full = &desc_device,

    .str  = desc_strings,

};

static const USBDesc desc_braille = {

    .id = {

        .idVendor          = 0x0403,

        .idProduct         = 0xfe72,

        .bcdDevice         = 0x0400,

        .iManufacturer     = STR_MANUFACTURER,

        .iProduct          = STR_PRODUCT_BRAILLE,

        .iSerialNumber     = STR_SERIALNUMBER,

    },

    .full = &desc_device,

    .str  = desc_strings,

};

static void usb_serial_reset(USBSerialState *s)

{

    /* TODO: Set flow control to none */

    s->event_chr = 0x0d;

    s->event_trigger = 0;

    s->recv_ptr = 0;

    s->recv_used = 0;

    /* TODO: purge in char driver */

}

static void usb_serial_handle_reset(USBDevice *dev)

{

    USBSerialState *s = (USBSerialState *)dev;

    DPRINTF("Reset\n");

    usb_serial_reset(s);

    /* TODO: Reset char device, send BREAK? */

}

static uint8_t usb_get_modem_lines(USBSerialState *s)

{

    int flags;

    uint8_t ret;

    if (qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP)

        return FTDI_CTS|FTDI_DSR|FTDI_RLSD;

    ret = 0;

    if (flags & CHR_TIOCM_CTS)

        ret |= FTDI_CTS;

    if (flags & CHR_TIOCM_DSR)

        ret |= FTDI_DSR;

    if (flags & CHR_TIOCM_RI)

        ret |= FTDI_RI;

    if (flags & CHR_TIOCM_CAR)

        ret |= FTDI_RLSD;

    return ret;

}

static int usb_serial_handle_control(USBDevice *dev, USBPacket *p,

               int request, int value, int index, int length, uint8_t *data)

{

    USBSerialState *s = (USBSerialState *)dev;

    int ret;

    DPRINTF("got control %x, value %x\n",request, value);

    ret = usb_desc_handle_control(dev, p, request, value, index, length, data);

    if (ret >= 0) {

        return ret;

    }

    ret = 0;

    switch (request) {

    case DeviceRequest | USB_REQ_GET_INTERFACE:

        data[0] = 0;

        ret = 1;

        break;

    case InterfaceOutRequest | USB_REQ_SET_INTERFACE:

        ret = 0;

        break;

    case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:

        ret = 0;

        break;

        /* Class specific requests.  */

    case DeviceOutVendor | FTDI_RESET:

        switch (value) {

        case FTDI_RESET_SIO:

            usb_serial_reset(s);

            break;

        case FTDI_RESET_RX:

            s->recv_ptr = 0;

            s->recv_used = 0;

            /* TODO: purge from char device */

            break;

        case FTDI_RESET_TX:

            /* TODO: purge from char device */

            break;

        }

        break;

    case DeviceOutVendor | FTDI_SET_MDM_CTRL:

    {

        static int flags;

        qemu_chr_fe_ioctl(s->cs,CHR_IOCTL_SERIAL_GET_TIOCM, &flags);

        if (value & FTDI_SET_RTS) {

            if (value & FTDI_RTS)

                flags |= CHR_TIOCM_RTS;

            else

                flags &= ~CHR_TIOCM_RTS;

        }

        if (value & FTDI_SET_DTR) {

            if (value & FTDI_DTR)

                flags |= CHR_TIOCM_DTR;

            else

                flags &= ~CHR_TIOCM_DTR;

        }

        qemu_chr_fe_ioctl(s->cs,CHR_IOCTL_SERIAL_SET_TIOCM, &flags);

        break;

    }

    case DeviceOutVendor | FTDI_SET_FLOW_CTRL:

        /* TODO: ioctl */

        break;

    case DeviceOutVendor | FTDI_SET_BAUD: {

        static const int subdivisors8[8] = { 0, 4, 2, 1, 3, 5, 6, 7 };

        int subdivisor8 = subdivisors8[((value & 0xc000) >> 14)

                                     | ((index & 1) << 2)];

        int divisor = value & 0x3fff;

        /* chip special cases */

        if (divisor == 1 && subdivisor8 == 0)

            subdivisor8 = 4;

        if (divisor == 0 && subdivisor8 == 0)

            divisor = 1;

        s->params.speed = (48000000 / 2) / (8 * divisor + subdivisor8);

        qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);

        break;

    }

    case DeviceOutVendor | FTDI_SET_DATA:

        switch (value & FTDI_PARITY) {

            case 0:

                s->params.parity = 'N';

                break;

            case FTDI_ODD:

                s->params.parity = 'O';

                break;

            case FTDI_EVEN:

                s->params.parity = 'E';

                break;

            default:

                DPRINTF("unsupported parity %d\n", value & FTDI_PARITY);

                goto fail;

        }

        switch (value & FTDI_STOP) {

            case FTDI_STOP1:

                s->params.stop_bits = 1;

                break;

            case FTDI_STOP2:

                s->params.stop_bits = 2;

                break;

            default:

                DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP);

                goto fail;

        }

        qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);

        /* TODO: TX ON/OFF */

        break;

    case DeviceInVendor | FTDI_GET_MDM_ST:

        data[0] = usb_get_modem_lines(s) | 1;

        data[1] = 0;

        ret = 2;

        break;

    case DeviceOutVendor | FTDI_SET_EVENT_CHR:

        /* TODO: handle it */

        s->event_chr = value;

        break;

    case DeviceOutVendor | FTDI_SET_ERROR_CHR:

        /* TODO: handle it */

        s->error_chr = value;

        break;

    case DeviceOutVendor | FTDI_SET_LATENCY:

        s->latency = value;

        break;

    case DeviceInVendor | FTDI_GET_LATENCY:

        data[0] = s->latency;

        ret = 1;

        break;

    default:

    fail:

        DPRINTF("got unsupported/bogus control %x, value %x\n", request, value);

        ret = USB_RET_STALL;

        break;

    }

    return ret;

}

static int usb_serial_handle_data(USBDevice *dev, USBPacket *p)

{

    USBSerialState *s = (USBSerialState *)dev;

    int i, ret = 0;

    uint8_t devep = p->devep;

    struct iovec *iov;

    uint8_t header[2];

    int first_len, len;

    switch (p->pid) {

    case USB_TOKEN_OUT:

        if (devep != 2)

            goto fail;

        for (i = 0; i < p->iov.niov; i++) {

            iov = p->iov.iov + i;

            qemu_chr_fe_write(s->cs, iov->iov_base, iov->iov_len);

        }

        break;

    case USB_TOKEN_IN:

        if (devep != 1)

            goto fail;

        first_len = RECV_BUF - s->recv_ptr;

        len = p->iov.size;

        if (len <= 2) {

            ret = USB_RET_NAK;

            break;

        }

        header[0] = usb_get_modem_lines(s) | 1;

        /* We do not have the uart details */

        /* handle serial break */

        if (s->event_trigger && s->event_trigger & FTDI_BI) {

            s->event_trigger &= ~FTDI_BI;

            header[1] = FTDI_BI;

            usb_packet_copy(p, header, 2);

            ret = 2;

            break;

        } else {

            header[1] = 0;

        }

        len -= 2;

        if (len > s->recv_used)

            len = s->recv_used;

        if (!len) {

            ret = USB_RET_NAK;

            break;

        }

        if (first_len > len)

            first_len = len;

        usb_packet_copy(p, header, 2);

        usb_packet_copy(p, s->recv_buf + s->recv_ptr, first_len);

        if (len > first_len)

            usb_packet_copy(p, s->recv_buf, len - first_len);

        s->recv_used -= len;

        s->recv_ptr = (s->recv_ptr + len) % RECV_BUF;

        ret = len + 2;

        break;

    default:

        DPRINTF("Bad token\n");

    fail:

        ret = USB_RET_STALL;

        break;

    }

    return ret;

}

static void usb_serial_handle_destroy(USBDevice *dev)

{

    USBSerialState *s = (USBSerialState *)dev;

    qemu_chr_delete(s->cs);

}

static int usb_serial_can_read(void *opaque)

{

    USBSerialState *s = opaque;

    return RECV_BUF - s->recv_used;

}

static void usb_serial_read(void *opaque, const uint8_t *buf, int size)

{

    USBSerialState *s = opaque;

    int first_size, start;

    /* room in the buffer? */

    if (size > (RECV_BUF - s->recv_used))

        size = RECV_BUF - s->recv_used;

    start = s->recv_ptr + s->recv_used;

    if (start < RECV_BUF) {

        /* copy data to end of buffer */

        first_size = RECV_BUF - start;

        if (first_size > size)

            first_size = size;

        memcpy(s->recv_buf + start, buf, first_size);

        /* wrap around to front if needed */

        if (size > first_size)

            memcpy(s->recv_buf, buf + first_size, size - first_size);

    } else {

        start -= RECV_BUF;

        memcpy(s->recv_buf + start, buf, size);

    }

    s->recv_used += size;

}

static void usb_serial_event(void *opaque, int event)

{

    USBSerialState *s = opaque;

    switch (event) {

        case CHR_EVENT_BREAK:

            s->event_trigger |= FTDI_BI;

            break;

        case CHR_EVENT_FOCUS:

            break;

        case CHR_EVENT_OPENED:

            usb_serial_reset(s);

            /* TODO: Reset USB port */

            break;

    }

}

static int usb_serial_initfn(USBDevice *dev)

{

    USBSerialState *s = DO_UPCAST(USBSerialState, dev, dev);

    usb_desc_init(dev);

    if (!s->cs) {

        error_report("Property chardev is required");

        return -1;

    }

    qemu_chr_add_handlers(s->cs, usb_serial_can_read, usb_serial_read,

                          usb_serial_event, s);

    usb_serial_handle_reset(dev);

    return 0;

}

static USBDevice *usb_serial_init(const char *filename)

{

    USBDevice *dev;

    CharDriverState *cdrv;

    uint32_t vendorid = 0, productid = 0;

    char label[32];

    static int index;

    while (*filename && *filename != ':') {

        const char *p;

        char *e;

        if (strstart(filename, "vendorid=", &p)) {

            vendorid = strtol(p, &e, 16);

            if (e == p || (*e && *e != ',' && *e != ':')) {

                error_report("bogus vendor ID %s", p);

                return NULL;

            }

            filename = e;

        } else if (strstart(filename, "productid=", &p)) {

            productid = strtol(p, &e, 16);

            if (e == p || (*e && *e != ',' && *e != ':')) {

                error_report("bogus product ID %s", p);

                return NULL;

            }

            filename = e;

        } else {

            error_report("unrecognized serial USB option %s", filename);

            return NULL;

        }

        while(*filename == ',')

            filename++;

    }

    if (!*filename) {

        error_report("character device specification needed");

        return NULL;

    }

    filename++;

    snprintf(label, sizeof(label), "usbserial%d", index++);

    cdrv = qemu_chr_new(label, filename, NULL);

    if (!cdrv)

        return NULL;

    dev = usb_create(NULL /* FIXME */, "usb-serial");

    if (!dev) {

        return NULL;

    }

    qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);

    if (vendorid)

        qdev_prop_set_uint16(&dev->qdev, "vendorid", vendorid);

    if (productid)

        qdev_prop_set_uint16(&dev->qdev, "productid", productid);

    qdev_init_nofail(&dev->qdev);

    return dev;

}

static USBDevice *usb_braille_init(const char *unused)

{

    USBDevice *dev;

    CharDriverState *cdrv;

    cdrv = qemu_chr_new("braille", "braille", NULL);

    if (!cdrv)

        return NULL;

    dev = usb_create(NULL /* FIXME */, "usb-braille");

    qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);

    qdev_init_nofail(&dev->qdev);

    return dev;

}

static const VMStateDescription vmstate_usb_serial = {

    .name = "usb-serial",

    .unmigratable = 1,

};

static struct USBDeviceInfo serial_info = {

    .product_desc   = "QEMU USB Serial",

    .qdev.name      = "usb-serial",

    .qdev.size      = sizeof(USBSerialState),

    .qdev.vmsd      = &vmstate_usb_serial,

    .usb_desc       = &desc_serial,

    .init           = usb_serial_initfn,

    .handle_packet  = usb_generic_handle_packet,

    .handle_reset   = usb_serial_handle_reset,

    .handle_control = usb_serial_handle_control,

    .handle_data    = usb_serial_handle_data,

    .handle_destroy = usb_serial_handle_destroy,

    .usbdevice_name = "serial",

    .usbdevice_init = usb_serial_init,

    .qdev.props     = (Property[]) {

        DEFINE_PROP_CHR("chardev", USBSerialState, cs),

        DEFINE_PROP_END_OF_LIST(),

    },

};

static struct USBDeviceInfo braille_info = {

    .product_desc   = "QEMU USB Braille",

    .qdev.name      = "usb-braille",

    .qdev.size      = sizeof(USBSerialState),

    .qdev.vmsd      = &vmstate_usb_serial,

    .usb_desc       = &desc_braille,

    .init           = usb_serial_initfn,

    .handle_packet  = usb_generic_handle_packet,

    .handle_reset   = usb_serial_handle_reset,

    .handle_control = usb_serial_handle_control,

    .handle_data    = usb_serial_handle_data,

    .handle_destroy = usb_serial_handle_destroy,

    .usbdevice_name = "braille",

    .usbdevice_init = usb_braille_init,

    .qdev.props     = (Property[]) {

        DEFINE_PROP_CHR("chardev", USBSerialState, cs),

        DEFINE_PROP_END_OF_LIST(),

    },

};

static void usb_serial_register_devices(void)

{

    usb_qdev_register(&serial_info);

    usb_qdev_register(&braille_info);

}

device_init(usb_serial_register_devices)