root / hw / scsi-disk.c @ b4b784fe
History | View | Annotate | Download (30.8 kB)
1 |
/*
|
---|---|
2 |
* SCSI Device emulation
|
3 |
*
|
4 |
* Copyright (c) 2006 CodeSourcery.
|
5 |
* Based on code by Fabrice Bellard
|
6 |
*
|
7 |
* Written by Paul Brook
|
8 |
* Modifications:
|
9 |
* 2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case
|
10 |
* when the allocation length of CDB is smaller
|
11 |
* than 36.
|
12 |
* 2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the
|
13 |
* MODE SENSE response.
|
14 |
*
|
15 |
* This code is licenced under the LGPL.
|
16 |
*
|
17 |
* Note that this file only handles the SCSI architecture model and device
|
18 |
* commands. Emulation of interface/link layer protocols is handled by
|
19 |
* the host adapter emulator.
|
20 |
*/
|
21 |
|
22 |
#include <qemu-common.h> |
23 |
#include <sysemu.h> |
24 |
//#define DEBUG_SCSI
|
25 |
|
26 |
#ifdef DEBUG_SCSI
|
27 |
#define DPRINTF(fmt, ...) \
|
28 |
do { printf("scsi-disk: " fmt , ## __VA_ARGS__); } while (0) |
29 |
#else
|
30 |
#define DPRINTF(fmt, ...) do {} while(0) |
31 |
#endif
|
32 |
|
33 |
#define BADF(fmt, ...) \
|
34 |
do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0) |
35 |
|
36 |
#include "qemu-common.h" |
37 |
#include "block.h" |
38 |
#include "scsi.h" |
39 |
#include "scsi-defs.h" |
40 |
|
41 |
#define SCSI_DMA_BUF_SIZE 131072 |
42 |
#define SCSI_MAX_INQUIRY_LEN 256 |
43 |
|
44 |
#define SCSI_REQ_STATUS_RETRY 0x01 |
45 |
|
46 |
typedef struct SCSIDiskState SCSIDiskState; |
47 |
|
48 |
typedef struct SCSIDiskReq { |
49 |
SCSIRequest req; |
50 |
/* ??? We should probably keep track of whether the data transfer is
|
51 |
a read or a write. Currently we rely on the host getting it right. */
|
52 |
/* Both sector and sector_count are in terms of qemu 512 byte blocks. */
|
53 |
uint64_t sector; |
54 |
uint32_t sector_count; |
55 |
struct iovec iov;
|
56 |
QEMUIOVector qiov; |
57 |
uint32_t status; |
58 |
} SCSIDiskReq; |
59 |
|
60 |
struct SCSIDiskState
|
61 |
{ |
62 |
SCSIDevice qdev; |
63 |
/* The qemu block layer uses a fixed 512 byte sector size.
|
64 |
This is the number of 512 byte blocks in a single scsi sector. */
|
65 |
int cluster_size;
|
66 |
uint64_t max_lba; |
67 |
QEMUBH *bh; |
68 |
}; |
69 |
|
70 |
static SCSIDiskReq *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun)
|
71 |
{ |
72 |
SCSIRequest *req; |
73 |
SCSIDiskReq *r; |
74 |
|
75 |
req = scsi_req_alloc(sizeof(SCSIDiskReq), d, tag, lun);
|
76 |
r = DO_UPCAST(SCSIDiskReq, req, req); |
77 |
r->iov.iov_base = qemu_memalign(512, SCSI_DMA_BUF_SIZE);
|
78 |
return r;
|
79 |
} |
80 |
|
81 |
static void scsi_remove_request(SCSIDiskReq *r) |
82 |
{ |
83 |
qemu_free(r->iov.iov_base); |
84 |
scsi_req_free(&r->req); |
85 |
} |
86 |
|
87 |
static SCSIDiskReq *scsi_find_request(SCSIDiskState *s, uint32_t tag)
|
88 |
{ |
89 |
return DO_UPCAST(SCSIDiskReq, req, scsi_req_find(&s->qdev, tag));
|
90 |
} |
91 |
|
92 |
static void scsi_req_set_status(SCSIRequest *req, int status, int sense_code) |
93 |
{ |
94 |
req->status = status; |
95 |
scsi_dev_set_sense(req->dev, sense_code); |
96 |
} |
97 |
|
98 |
/* Helper function for command completion. */
|
99 |
static void scsi_command_complete(SCSIDiskReq *r, int status, int sense) |
100 |
{ |
101 |
DPRINTF("Command complete tag=0x%x status=%d sense=%d\n",
|
102 |
r->req.tag, status, sense); |
103 |
scsi_req_set_status(&r->req, status, sense); |
104 |
scsi_req_complete(&r->req); |
105 |
scsi_remove_request(r); |
106 |
} |
107 |
|
108 |
/* Cancel a pending data transfer. */
|
109 |
static void scsi_cancel_io(SCSIDevice *d, uint32_t tag) |
110 |
{ |
111 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); |
112 |
SCSIDiskReq *r; |
113 |
DPRINTF("Cancel tag=0x%x\n", tag);
|
114 |
r = scsi_find_request(s, tag); |
115 |
if (r) {
|
116 |
if (r->req.aiocb)
|
117 |
bdrv_aio_cancel(r->req.aiocb); |
118 |
r->req.aiocb = NULL;
|
119 |
scsi_remove_request(r); |
120 |
} |
121 |
} |
122 |
|
123 |
static void scsi_read_complete(void * opaque, int ret) |
124 |
{ |
125 |
SCSIDiskReq *r = (SCSIDiskReq *)opaque; |
126 |
|
127 |
if (ret) {
|
128 |
DPRINTF("IO error\n");
|
129 |
r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, 0);
|
130 |
scsi_command_complete(r, CHECK_CONDITION, NO_SENSE); |
131 |
return;
|
132 |
} |
133 |
DPRINTF("Data ready tag=0x%x len=%" PRId64 "\n", r->req.tag, r->iov.iov_len); |
134 |
|
135 |
r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len); |
136 |
} |
137 |
|
138 |
/* Read more data from scsi device into buffer. */
|
139 |
static void scsi_read_data(SCSIDevice *d, uint32_t tag) |
140 |
{ |
141 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); |
142 |
SCSIDiskReq *r; |
143 |
uint32_t n; |
144 |
|
145 |
r = scsi_find_request(s, tag); |
146 |
if (!r) {
|
147 |
BADF("Bad read tag 0x%x\n", tag);
|
148 |
/* ??? This is the wrong error. */
|
149 |
scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR); |
150 |
return;
|
151 |
} |
152 |
if (r->sector_count == (uint32_t)-1) { |
153 |
DPRINTF("Read buf_len=%" PRId64 "\n", r->iov.iov_len); |
154 |
r->sector_count = 0;
|
155 |
r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len); |
156 |
return;
|
157 |
} |
158 |
DPRINTF("Read sector_count=%d\n", r->sector_count);
|
159 |
if (r->sector_count == 0) { |
160 |
scsi_command_complete(r, GOOD, NO_SENSE); |
161 |
return;
|
162 |
} |
163 |
|
164 |
n = r->sector_count; |
165 |
if (n > SCSI_DMA_BUF_SIZE / 512) |
166 |
n = SCSI_DMA_BUF_SIZE / 512;
|
167 |
|
168 |
r->iov.iov_len = n * 512;
|
169 |
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
|
170 |
r->req.aiocb = bdrv_aio_readv(s->qdev.dinfo->bdrv, r->sector, &r->qiov, n, |
171 |
scsi_read_complete, r); |
172 |
if (r->req.aiocb == NULL) |
173 |
scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR); |
174 |
r->sector += n; |
175 |
r->sector_count -= n; |
176 |
} |
177 |
|
178 |
static int scsi_handle_write_error(SCSIDiskReq *r, int error) |
179 |
{ |
180 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
181 |
BlockInterfaceErrorAction action = |
182 |
drive_get_on_error(s->qdev.dinfo->bdrv, 0);
|
183 |
|
184 |
if (action == BLOCK_ERR_IGNORE)
|
185 |
return 0; |
186 |
|
187 |
if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
|
188 |
|| action == BLOCK_ERR_STOP_ANY) { |
189 |
r->status |= SCSI_REQ_STATUS_RETRY; |
190 |
vm_stop(0);
|
191 |
} else {
|
192 |
scsi_command_complete(r, CHECK_CONDITION, |
193 |
HARDWARE_ERROR); |
194 |
} |
195 |
|
196 |
return 1; |
197 |
} |
198 |
|
199 |
static void scsi_write_complete(void * opaque, int ret) |
200 |
{ |
201 |
SCSIDiskReq *r = (SCSIDiskReq *)opaque; |
202 |
uint32_t len; |
203 |
uint32_t n; |
204 |
|
205 |
r->req.aiocb = NULL;
|
206 |
|
207 |
if (ret) {
|
208 |
if (scsi_handle_write_error(r, -ret))
|
209 |
return;
|
210 |
} |
211 |
|
212 |
n = r->iov.iov_len / 512;
|
213 |
r->sector += n; |
214 |
r->sector_count -= n; |
215 |
if (r->sector_count == 0) { |
216 |
scsi_command_complete(r, GOOD, NO_SENSE); |
217 |
} else {
|
218 |
len = r->sector_count * 512;
|
219 |
if (len > SCSI_DMA_BUF_SIZE) {
|
220 |
len = SCSI_DMA_BUF_SIZE; |
221 |
} |
222 |
r->iov.iov_len = len; |
223 |
DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, len);
|
224 |
r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, len); |
225 |
} |
226 |
} |
227 |
|
228 |
static void scsi_write_request(SCSIDiskReq *r) |
229 |
{ |
230 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); |
231 |
uint32_t n; |
232 |
|
233 |
n = r->iov.iov_len / 512;
|
234 |
if (n) {
|
235 |
qemu_iovec_init_external(&r->qiov, &r->iov, 1);
|
236 |
r->req.aiocb = bdrv_aio_writev(s->qdev.dinfo->bdrv, r->sector, &r->qiov, n, |
237 |
scsi_write_complete, r); |
238 |
if (r->req.aiocb == NULL) |
239 |
scsi_command_complete(r, CHECK_CONDITION, |
240 |
HARDWARE_ERROR); |
241 |
} else {
|
242 |
/* Invoke completion routine to fetch data from host. */
|
243 |
scsi_write_complete(r, 0);
|
244 |
} |
245 |
} |
246 |
|
247 |
/* Write data to a scsi device. Returns nonzero on failure.
|
248 |
The transfer may complete asynchronously. */
|
249 |
static int scsi_write_data(SCSIDevice *d, uint32_t tag) |
250 |
{ |
251 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); |
252 |
SCSIDiskReq *r; |
253 |
|
254 |
DPRINTF("Write data tag=0x%x\n", tag);
|
255 |
r = scsi_find_request(s, tag); |
256 |
if (!r) {
|
257 |
BADF("Bad write tag 0x%x\n", tag);
|
258 |
scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR); |
259 |
return 1; |
260 |
} |
261 |
|
262 |
if (r->req.aiocb)
|
263 |
BADF("Data transfer already in progress\n");
|
264 |
|
265 |
scsi_write_request(r); |
266 |
|
267 |
return 0; |
268 |
} |
269 |
|
270 |
static void scsi_dma_restart_bh(void *opaque) |
271 |
{ |
272 |
SCSIDiskState *s = opaque; |
273 |
SCSIRequest *req; |
274 |
SCSIDiskReq *r; |
275 |
|
276 |
qemu_bh_delete(s->bh); |
277 |
s->bh = NULL;
|
278 |
|
279 |
QTAILQ_FOREACH(req, &s->qdev.requests, next) { |
280 |
r = DO_UPCAST(SCSIDiskReq, req, req); |
281 |
if (r->status & SCSI_REQ_STATUS_RETRY) {
|
282 |
r->status &= ~SCSI_REQ_STATUS_RETRY; |
283 |
scsi_write_request(r); |
284 |
} |
285 |
} |
286 |
} |
287 |
|
288 |
static void scsi_dma_restart_cb(void *opaque, int running, int reason) |
289 |
{ |
290 |
SCSIDiskState *s = opaque; |
291 |
|
292 |
if (!running)
|
293 |
return;
|
294 |
|
295 |
if (!s->bh) {
|
296 |
s->bh = qemu_bh_new(scsi_dma_restart_bh, s); |
297 |
qemu_bh_schedule(s->bh); |
298 |
} |
299 |
} |
300 |
|
301 |
/* Return a pointer to the data buffer. */
|
302 |
static uint8_t *scsi_get_buf(SCSIDevice *d, uint32_t tag)
|
303 |
{ |
304 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); |
305 |
SCSIDiskReq *r; |
306 |
|
307 |
r = scsi_find_request(s, tag); |
308 |
if (!r) {
|
309 |
BADF("Bad buffer tag 0x%x\n", tag);
|
310 |
return NULL; |
311 |
} |
312 |
return (uint8_t *)r->iov.iov_base;
|
313 |
} |
314 |
|
315 |
static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) |
316 |
{ |
317 |
BlockDriverState *bdrv = req->dev->dinfo->bdrv; |
318 |
int buflen = 0; |
319 |
|
320 |
if (req->cmd.buf[1] & 0x2) { |
321 |
/* Command support data - optional, not implemented */
|
322 |
BADF("optional INQUIRY command support request not implemented\n");
|
323 |
return -1; |
324 |
} |
325 |
|
326 |
if (req->cmd.buf[1] & 0x1) { |
327 |
/* Vital product data */
|
328 |
uint8_t page_code = req->cmd.buf[2];
|
329 |
if (req->cmd.xfer < 4) { |
330 |
BADF("Error: Inquiry (EVPD[%02X]) buffer size %zd is "
|
331 |
"less than 4\n", page_code, req->cmd.xfer);
|
332 |
return -1; |
333 |
} |
334 |
|
335 |
if (bdrv_get_type_hint(bdrv) == BDRV_TYPE_CDROM) {
|
336 |
outbuf[buflen++] = 5;
|
337 |
} else {
|
338 |
outbuf[buflen++] = 0;
|
339 |
} |
340 |
outbuf[buflen++] = page_code ; // this page
|
341 |
outbuf[buflen++] = 0x00;
|
342 |
|
343 |
switch (page_code) {
|
344 |
case 0x00: /* Supported page codes, mandatory */ |
345 |
DPRINTF("Inquiry EVPD[Supported pages] "
|
346 |
"buffer size %zd\n", req->cmd.xfer);
|
347 |
outbuf[buflen++] = 3; // number of pages |
348 |
outbuf[buflen++] = 0x00; // list of supported pages (this page) |
349 |
outbuf[buflen++] = 0x80; // unit serial number |
350 |
outbuf[buflen++] = 0x83; // device identification |
351 |
break;
|
352 |
|
353 |
case 0x80: /* Device serial number, optional */ |
354 |
{ |
355 |
const char *serial = req->dev->dinfo->serial ? |
356 |
req->dev->dinfo->serial : "0";
|
357 |
int l = strlen(serial);
|
358 |
|
359 |
if (l > req->cmd.xfer)
|
360 |
l = req->cmd.xfer; |
361 |
if (l > 20) |
362 |
l = 20;
|
363 |
|
364 |
DPRINTF("Inquiry EVPD[Serial number] "
|
365 |
"buffer size %zd\n", req->cmd.xfer);
|
366 |
outbuf[buflen++] = l; |
367 |
memcpy(outbuf+buflen, serial, l); |
368 |
buflen += l; |
369 |
break;
|
370 |
} |
371 |
|
372 |
case 0x83: /* Device identification page, mandatory */ |
373 |
{ |
374 |
int max_len = 255 - 8; |
375 |
int id_len = strlen(bdrv_get_device_name(bdrv));
|
376 |
|
377 |
if (id_len > max_len)
|
378 |
id_len = max_len; |
379 |
DPRINTF("Inquiry EVPD[Device identification] "
|
380 |
"buffer size %zd\n", req->cmd.xfer);
|
381 |
|
382 |
outbuf[buflen++] = 3 + id_len;
|
383 |
outbuf[buflen++] = 0x2; // ASCII |
384 |
outbuf[buflen++] = 0; // not officially assigned |
385 |
outbuf[buflen++] = 0; // reserved |
386 |
outbuf[buflen++] = id_len; // length of data following
|
387 |
|
388 |
memcpy(outbuf+buflen, bdrv_get_device_name(bdrv), id_len); |
389 |
buflen += id_len; |
390 |
break;
|
391 |
} |
392 |
default:
|
393 |
BADF("Error: unsupported Inquiry (EVPD[%02X]) "
|
394 |
"buffer size %zd\n", page_code, req->cmd.xfer);
|
395 |
return -1; |
396 |
} |
397 |
/* done with EVPD */
|
398 |
return buflen;
|
399 |
} |
400 |
|
401 |
/* Standard INQUIRY data */
|
402 |
if (req->cmd.buf[2] != 0) { |
403 |
BADF("Error: Inquiry (STANDARD) page or code "
|
404 |
"is non-zero [%02X]\n", req->cmd.buf[2]); |
405 |
return -1; |
406 |
} |
407 |
|
408 |
/* PAGE CODE == 0 */
|
409 |
if (req->cmd.xfer < 5) { |
410 |
BADF("Error: Inquiry (STANDARD) buffer size %zd "
|
411 |
"is less than 5\n", req->cmd.xfer);
|
412 |
return -1; |
413 |
} |
414 |
|
415 |
buflen = req->cmd.xfer; |
416 |
if (buflen > SCSI_MAX_INQUIRY_LEN)
|
417 |
buflen = SCSI_MAX_INQUIRY_LEN; |
418 |
|
419 |
memset(outbuf, 0, buflen);
|
420 |
|
421 |
if (req->lun || req->cmd.buf[1] >> 5) { |
422 |
outbuf[0] = 0x7f; /* LUN not supported */ |
423 |
return buflen;
|
424 |
} |
425 |
|
426 |
if (bdrv_get_type_hint(bdrv) == BDRV_TYPE_CDROM) {
|
427 |
outbuf[0] = 5; |
428 |
outbuf[1] = 0x80; |
429 |
memcpy(&outbuf[16], "QEMU CD-ROM ", 16); |
430 |
} else {
|
431 |
outbuf[0] = 0; |
432 |
memcpy(&outbuf[16], "QEMU HARDDISK ", 16); |
433 |
} |
434 |
memcpy(&outbuf[8], "QEMU ", 8); |
435 |
memcpy(&outbuf[32], QEMU_VERSION, 4); |
436 |
/* Identify device as SCSI-3 rev 1.
|
437 |
Some later commands are also implemented. */
|
438 |
outbuf[2] = 3; |
439 |
outbuf[3] = 2; /* Format 2 */ |
440 |
|
441 |
if (buflen > 36) { |
442 |
outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */ |
443 |
} else {
|
444 |
/* If the allocation length of CDB is too small,
|
445 |
the additional length is not adjusted */
|
446 |
outbuf[4] = 36 - 5; |
447 |
} |
448 |
|
449 |
/* Sync data transfer and TCQ. */
|
450 |
outbuf[7] = 0x10 | (req->bus->tcq ? 0x02 : 0); |
451 |
return buflen;
|
452 |
} |
453 |
|
454 |
static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p) |
455 |
{ |
456 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
457 |
BlockDriverState *bdrv = req->dev->dinfo->bdrv; |
458 |
int cylinders, heads, secs;
|
459 |
|
460 |
switch (page) {
|
461 |
case 4: /* Rigid disk device geometry page. */ |
462 |
p[0] = 4; |
463 |
p[1] = 0x16; |
464 |
/* if a geometry hint is available, use it */
|
465 |
bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs); |
466 |
p[2] = (cylinders >> 16) & 0xff; |
467 |
p[3] = (cylinders >> 8) & 0xff; |
468 |
p[4] = cylinders & 0xff; |
469 |
p[5] = heads & 0xff; |
470 |
/* Write precomp start cylinder, disabled */
|
471 |
p[6] = (cylinders >> 16) & 0xff; |
472 |
p[7] = (cylinders >> 8) & 0xff; |
473 |
p[8] = cylinders & 0xff; |
474 |
/* Reduced current start cylinder, disabled */
|
475 |
p[9] = (cylinders >> 16) & 0xff; |
476 |
p[10] = (cylinders >> 8) & 0xff; |
477 |
p[11] = cylinders & 0xff; |
478 |
/* Device step rate [ns], 200ns */
|
479 |
p[12] = 0; |
480 |
p[13] = 200; |
481 |
/* Landing zone cylinder */
|
482 |
p[14] = 0xff; |
483 |
p[15] = 0xff; |
484 |
p[16] = 0xff; |
485 |
/* Medium rotation rate [rpm], 5400 rpm */
|
486 |
p[20] = (5400 >> 8) & 0xff; |
487 |
p[21] = 5400 & 0xff; |
488 |
return 0x16; |
489 |
|
490 |
case 5: /* Flexible disk device geometry page. */ |
491 |
p[0] = 5; |
492 |
p[1] = 0x1e; |
493 |
/* Transfer rate [kbit/s], 5Mbit/s */
|
494 |
p[2] = 5000 >> 8; |
495 |
p[3] = 5000 & 0xff; |
496 |
/* if a geometry hint is available, use it */
|
497 |
bdrv_get_geometry_hint(bdrv, &cylinders, &heads, &secs); |
498 |
p[4] = heads & 0xff; |
499 |
p[5] = secs & 0xff; |
500 |
p[6] = s->cluster_size * 2; |
501 |
p[8] = (cylinders >> 8) & 0xff; |
502 |
p[9] = cylinders & 0xff; |
503 |
/* Write precomp start cylinder, disabled */
|
504 |
p[10] = (cylinders >> 8) & 0xff; |
505 |
p[11] = cylinders & 0xff; |
506 |
/* Reduced current start cylinder, disabled */
|
507 |
p[12] = (cylinders >> 8) & 0xff; |
508 |
p[13] = cylinders & 0xff; |
509 |
/* Device step rate [100us], 100us */
|
510 |
p[14] = 0; |
511 |
p[15] = 1; |
512 |
/* Device step pulse width [us], 1us */
|
513 |
p[16] = 1; |
514 |
/* Device head settle delay [100us], 100us */
|
515 |
p[17] = 0; |
516 |
p[18] = 1; |
517 |
/* Motor on delay [0.1s], 0.1s */
|
518 |
p[19] = 1; |
519 |
/* Motor off delay [0.1s], 0.1s */
|
520 |
p[20] = 1; |
521 |
/* Medium rotation rate [rpm], 5400 rpm */
|
522 |
p[28] = (5400 >> 8) & 0xff; |
523 |
p[29] = 5400 & 0xff; |
524 |
return 0x1e; |
525 |
|
526 |
case 8: /* Caching page. */ |
527 |
p[0] = 8; |
528 |
p[1] = 0x12; |
529 |
if (bdrv_enable_write_cache(s->qdev.dinfo->bdrv)) {
|
530 |
p[2] = 4; /* WCE */ |
531 |
} |
532 |
return 20; |
533 |
|
534 |
case 0x2a: /* CD Capabilities and Mechanical Status page. */ |
535 |
if (bdrv_get_type_hint(bdrv) != BDRV_TYPE_CDROM)
|
536 |
return 0; |
537 |
p[0] = 0x2a; |
538 |
p[1] = 0x14; |
539 |
p[2] = 3; // CD-R & CD-RW read |
540 |
p[3] = 0; // Writing not supported |
541 |
p[4] = 0x7f; /* Audio, composite, digital out, |
542 |
mode 2 form 1&2, multi session */
|
543 |
p[5] = 0xff; /* CD DA, DA accurate, RW supported, |
544 |
RW corrected, C2 errors, ISRC,
|
545 |
UPC, Bar code */
|
546 |
p[6] = 0x2d | (bdrv_is_locked(s->qdev.dinfo->bdrv)? 2 : 0); |
547 |
/* Locking supported, jumper present, eject, tray */
|
548 |
p[7] = 0; /* no volume & mute control, no |
549 |
changer */
|
550 |
p[8] = (50 * 176) >> 8; // 50x read speed |
551 |
p[9] = (50 * 176) & 0xff; |
552 |
p[10] = 0 >> 8; // No volume |
553 |
p[11] = 0 & 0xff; |
554 |
p[12] = 2048 >> 8; // 2M buffer |
555 |
p[13] = 2048 & 0xff; |
556 |
p[14] = (16 * 176) >> 8; // 16x read speed current |
557 |
p[15] = (16 * 176) & 0xff; |
558 |
p[18] = (16 * 176) >> 8; // 16x write speed |
559 |
p[19] = (16 * 176) & 0xff; |
560 |
p[20] = (16 * 176) >> 8; // 16x write speed current |
561 |
p[21] = (16 * 176) & 0xff; |
562 |
return 22; |
563 |
|
564 |
default:
|
565 |
return 0; |
566 |
} |
567 |
} |
568 |
|
569 |
static int scsi_disk_emulate_mode_sense(SCSIRequest *req, uint8_t *outbuf) |
570 |
{ |
571 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
572 |
BlockDriverState *bdrv = req->dev->dinfo->bdrv; |
573 |
uint64_t nb_sectors; |
574 |
int page, dbd, buflen;
|
575 |
uint8_t *p; |
576 |
|
577 |
dbd = req->cmd.buf[1] & 0x8; |
578 |
page = req->cmd.buf[2] & 0x3f; |
579 |
DPRINTF("Mode Sense (page %d, len %zd)\n", page, req->cmd.xfer);
|
580 |
memset(outbuf, 0, req->cmd.xfer);
|
581 |
p = outbuf; |
582 |
|
583 |
p[1] = 0; /* Default media type. */ |
584 |
p[3] = 0; /* Block descriptor length. */ |
585 |
if (bdrv_get_type_hint(bdrv) == BDRV_TYPE_CDROM ||
|
586 |
bdrv_is_read_only(bdrv)) { |
587 |
p[2] = 0x80; /* Readonly. */ |
588 |
} |
589 |
p += 4;
|
590 |
|
591 |
bdrv_get_geometry(bdrv, &nb_sectors); |
592 |
if ((~dbd) & nb_sectors) {
|
593 |
outbuf[3] = 8; /* Block descriptor length */ |
594 |
nb_sectors /= s->cluster_size; |
595 |
nb_sectors--; |
596 |
if (nb_sectors > 0xffffff) |
597 |
nb_sectors = 0xffffff;
|
598 |
p[0] = 0; /* media density code */ |
599 |
p[1] = (nb_sectors >> 16) & 0xff; |
600 |
p[2] = (nb_sectors >> 8) & 0xff; |
601 |
p[3] = nb_sectors & 0xff; |
602 |
p[4] = 0; /* reserved */ |
603 |
p[5] = 0; /* bytes 5-7 are the sector size in bytes */ |
604 |
p[6] = s->cluster_size * 2; |
605 |
p[7] = 0; |
606 |
p += 8;
|
607 |
} |
608 |
|
609 |
switch (page) {
|
610 |
case 0x04: |
611 |
case 0x05: |
612 |
case 0x08: |
613 |
case 0x2a: |
614 |
p += mode_sense_page(req, page, p); |
615 |
break;
|
616 |
case 0x3f: |
617 |
p += mode_sense_page(req, 0x08, p);
|
618 |
p += mode_sense_page(req, 0x2a, p);
|
619 |
break;
|
620 |
} |
621 |
|
622 |
buflen = p - outbuf; |
623 |
outbuf[0] = buflen - 4; |
624 |
if (buflen > req->cmd.xfer)
|
625 |
buflen = req->cmd.xfer; |
626 |
return buflen;
|
627 |
} |
628 |
|
629 |
static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf) |
630 |
{ |
631 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
632 |
BlockDriverState *bdrv = req->dev->dinfo->bdrv; |
633 |
int start_track, format, msf, toclen;
|
634 |
uint64_t nb_sectors; |
635 |
|
636 |
msf = req->cmd.buf[1] & 2; |
637 |
format = req->cmd.buf[2] & 0xf; |
638 |
start_track = req->cmd.buf[6];
|
639 |
bdrv_get_geometry(bdrv, &nb_sectors); |
640 |
DPRINTF("Read TOC (track %d format %d msf %d)\n", start_track, format, msf >> 1); |
641 |
nb_sectors /= s->cluster_size; |
642 |
switch (format) {
|
643 |
case 0: |
644 |
toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track); |
645 |
break;
|
646 |
case 1: |
647 |
/* multi session : only a single session defined */
|
648 |
toclen = 12;
|
649 |
memset(outbuf, 0, 12); |
650 |
outbuf[1] = 0x0a; |
651 |
outbuf[2] = 0x01; |
652 |
outbuf[3] = 0x01; |
653 |
break;
|
654 |
case 2: |
655 |
toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track); |
656 |
break;
|
657 |
default:
|
658 |
return -1; |
659 |
} |
660 |
if (toclen > req->cmd.xfer)
|
661 |
toclen = req->cmd.xfer; |
662 |
return toclen;
|
663 |
} |
664 |
|
665 |
static int scsi_disk_emulate_command(SCSIRequest *req, uint8_t *outbuf) |
666 |
{ |
667 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); |
668 |
BlockDriverState *bdrv = req->dev->dinfo->bdrv; |
669 |
uint64_t nb_sectors; |
670 |
int buflen = 0; |
671 |
|
672 |
switch (req->cmd.buf[0]) { |
673 |
case TEST_UNIT_READY:
|
674 |
if (!bdrv_is_inserted(bdrv))
|
675 |
goto not_ready;
|
676 |
break;
|
677 |
case REQUEST_SENSE:
|
678 |
if (req->cmd.xfer < 4) |
679 |
goto illegal_request;
|
680 |
memset(outbuf, 0, 4); |
681 |
buflen = 4;
|
682 |
if (req->dev->sense.key == NOT_READY && req->cmd.xfer >= 18) { |
683 |
memset(outbuf, 0, 18); |
684 |
buflen = 18;
|
685 |
outbuf[7] = 10; |
686 |
/* asc 0x3a, ascq 0: Medium not present */
|
687 |
outbuf[12] = 0x3a; |
688 |
outbuf[13] = 0; |
689 |
} |
690 |
outbuf[0] = 0xf0; |
691 |
outbuf[1] = 0; |
692 |
outbuf[2] = req->dev->sense.key;
|
693 |
scsi_dev_clear_sense(req->dev); |
694 |
break;
|
695 |
case INQUIRY:
|
696 |
buflen = scsi_disk_emulate_inquiry(req, outbuf); |
697 |
if (buflen < 0) |
698 |
goto illegal_request;
|
699 |
break;
|
700 |
case MODE_SENSE:
|
701 |
case MODE_SENSE_10:
|
702 |
buflen = scsi_disk_emulate_mode_sense(req, outbuf); |
703 |
if (buflen < 0) |
704 |
goto illegal_request;
|
705 |
break;
|
706 |
case READ_TOC:
|
707 |
buflen = scsi_disk_emulate_read_toc(req, outbuf); |
708 |
if (buflen < 0) |
709 |
goto illegal_request;
|
710 |
break;
|
711 |
case RESERVE:
|
712 |
if (req->cmd.buf[1] & 1) |
713 |
goto illegal_request;
|
714 |
break;
|
715 |
case RESERVE_10:
|
716 |
if (req->cmd.buf[1] & 3) |
717 |
goto illegal_request;
|
718 |
break;
|
719 |
case RELEASE:
|
720 |
if (req->cmd.buf[1] & 1) |
721 |
goto illegal_request;
|
722 |
break;
|
723 |
case RELEASE_10:
|
724 |
if (req->cmd.buf[1] & 3) |
725 |
goto illegal_request;
|
726 |
break;
|
727 |
case START_STOP:
|
728 |
if (bdrv_get_type_hint(bdrv) == BDRV_TYPE_CDROM && (req->cmd.buf[4] & 2)) { |
729 |
/* load/eject medium */
|
730 |
bdrv_eject(bdrv, !(req->cmd.buf[4] & 1)); |
731 |
} |
732 |
break;
|
733 |
case ALLOW_MEDIUM_REMOVAL:
|
734 |
bdrv_set_locked(bdrv, req->cmd.buf[4] & 1); |
735 |
break;
|
736 |
case READ_CAPACITY:
|
737 |
/* The normal LEN field for this command is zero. */
|
738 |
memset(outbuf, 0, 8); |
739 |
bdrv_get_geometry(bdrv, &nb_sectors); |
740 |
if (!nb_sectors)
|
741 |
goto not_ready;
|
742 |
nb_sectors /= s->cluster_size; |
743 |
/* Returned value is the address of the last sector. */
|
744 |
nb_sectors--; |
745 |
/* Remember the new size for read/write sanity checking. */
|
746 |
s->max_lba = nb_sectors; |
747 |
/* Clip to 2TB, instead of returning capacity modulo 2TB. */
|
748 |
if (nb_sectors > UINT32_MAX)
|
749 |
nb_sectors = UINT32_MAX; |
750 |
outbuf[0] = (nb_sectors >> 24) & 0xff; |
751 |
outbuf[1] = (nb_sectors >> 16) & 0xff; |
752 |
outbuf[2] = (nb_sectors >> 8) & 0xff; |
753 |
outbuf[3] = nb_sectors & 0xff; |
754 |
outbuf[4] = 0; |
755 |
outbuf[5] = 0; |
756 |
outbuf[6] = s->cluster_size * 2; |
757 |
outbuf[7] = 0; |
758 |
buflen = 8;
|
759 |
break;
|
760 |
case SYNCHRONIZE_CACHE:
|
761 |
bdrv_flush(bdrv); |
762 |
break;
|
763 |
case GET_CONFIGURATION:
|
764 |
memset(outbuf, 0, 8); |
765 |
/* ??? This should probably return much more information. For now
|
766 |
just return the basic header indicating the CD-ROM profile. */
|
767 |
outbuf[7] = 8; // CD-ROM |
768 |
buflen = 8;
|
769 |
break;
|
770 |
case SERVICE_ACTION_IN:
|
771 |
/* Service Action In subcommands. */
|
772 |
if ((req->cmd.buf[1] & 31) == 0x10) { |
773 |
DPRINTF("SAI READ CAPACITY(16)\n");
|
774 |
memset(outbuf, 0, req->cmd.xfer);
|
775 |
bdrv_get_geometry(bdrv, &nb_sectors); |
776 |
if (!nb_sectors)
|
777 |
goto not_ready;
|
778 |
nb_sectors /= s->cluster_size; |
779 |
/* Returned value is the address of the last sector. */
|
780 |
nb_sectors--; |
781 |
/* Remember the new size for read/write sanity checking. */
|
782 |
s->max_lba = nb_sectors; |
783 |
outbuf[0] = (nb_sectors >> 56) & 0xff; |
784 |
outbuf[1] = (nb_sectors >> 48) & 0xff; |
785 |
outbuf[2] = (nb_sectors >> 40) & 0xff; |
786 |
outbuf[3] = (nb_sectors >> 32) & 0xff; |
787 |
outbuf[4] = (nb_sectors >> 24) & 0xff; |
788 |
outbuf[5] = (nb_sectors >> 16) & 0xff; |
789 |
outbuf[6] = (nb_sectors >> 8) & 0xff; |
790 |
outbuf[7] = nb_sectors & 0xff; |
791 |
outbuf[8] = 0; |
792 |
outbuf[9] = 0; |
793 |
outbuf[10] = s->cluster_size * 2; |
794 |
outbuf[11] = 0; |
795 |
/* Protection, exponent and lowest lba field left blank. */
|
796 |
buflen = req->cmd.xfer; |
797 |
break;
|
798 |
} |
799 |
DPRINTF("Unsupported Service Action In\n");
|
800 |
goto illegal_request;
|
801 |
case REPORT_LUNS:
|
802 |
if (req->cmd.xfer < 16) |
803 |
goto illegal_request;
|
804 |
memset(outbuf, 0, 16); |
805 |
outbuf[3] = 8; |
806 |
buflen = 16;
|
807 |
break;
|
808 |
case VERIFY:
|
809 |
break;
|
810 |
default:
|
811 |
goto illegal_request;
|
812 |
} |
813 |
scsi_req_set_status(req, GOOD, NO_SENSE); |
814 |
return buflen;
|
815 |
|
816 |
not_ready:
|
817 |
scsi_req_set_status(req, CHECK_CONDITION, NOT_READY); |
818 |
return 0; |
819 |
|
820 |
illegal_request:
|
821 |
scsi_req_set_status(req, CHECK_CONDITION, ILLEGAL_REQUEST); |
822 |
return 0; |
823 |
} |
824 |
|
825 |
/* Execute a scsi command. Returns the length of the data expected by the
|
826 |
command. This will be Positive for data transfers from the device
|
827 |
(eg. disk reads), negative for transfers to the device (eg. disk writes),
|
828 |
and zero if the command does not transfer any data. */
|
829 |
|
830 |
static int32_t scsi_send_command(SCSIDevice *d, uint32_t tag,
|
831 |
uint8_t *buf, int lun)
|
832 |
{ |
833 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); |
834 |
uint64_t lba; |
835 |
uint32_t len; |
836 |
int cmdlen;
|
837 |
int is_write;
|
838 |
uint8_t command; |
839 |
uint8_t *outbuf; |
840 |
SCSIDiskReq *r; |
841 |
int rc;
|
842 |
|
843 |
command = buf[0];
|
844 |
r = scsi_find_request(s, tag); |
845 |
if (r) {
|
846 |
BADF("Tag 0x%x already in use\n", tag);
|
847 |
scsi_cancel_io(d, tag); |
848 |
} |
849 |
/* ??? Tags are not unique for different luns. We only implement a
|
850 |
single lun, so this should not matter. */
|
851 |
r = scsi_new_request(d, tag, lun); |
852 |
outbuf = (uint8_t *)r->iov.iov_base; |
853 |
is_write = 0;
|
854 |
DPRINTF("Command: lun=%d tag=0x%x data=0x%02x", lun, tag, buf[0]); |
855 |
switch (command >> 5) { |
856 |
case 0: |
857 |
lba = (uint64_t) buf[3] | ((uint64_t) buf[2] << 8) | |
858 |
(((uint64_t) buf[1] & 0x1f) << 16); |
859 |
len = buf[4];
|
860 |
cmdlen = 6;
|
861 |
break;
|
862 |
case 1: |
863 |
case 2: |
864 |
lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) | |
865 |
((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24); |
866 |
len = buf[8] | (buf[7] << 8); |
867 |
cmdlen = 10;
|
868 |
break;
|
869 |
case 4: |
870 |
lba = (uint64_t) buf[9] | ((uint64_t) buf[8] << 8) | |
871 |
((uint64_t) buf[7] << 16) | ((uint64_t) buf[6] << 24) | |
872 |
((uint64_t) buf[5] << 32) | ((uint64_t) buf[4] << 40) | |
873 |
((uint64_t) buf[3] << 48) | ((uint64_t) buf[2] << 56); |
874 |
len = buf[13] | (buf[12] << 8) | (buf[11] << 16) | (buf[10] << 24); |
875 |
cmdlen = 16;
|
876 |
break;
|
877 |
case 5: |
878 |
lba = (uint64_t) buf[5] | ((uint64_t) buf[4] << 8) | |
879 |
((uint64_t) buf[3] << 16) | ((uint64_t) buf[2] << 24); |
880 |
len = buf[9] | (buf[8] << 8) | (buf[7] << 16) | (buf[6] << 24); |
881 |
cmdlen = 12;
|
882 |
break;
|
883 |
default:
|
884 |
BADF("Unsupported command length, command %x\n", command);
|
885 |
goto fail;
|
886 |
} |
887 |
#ifdef DEBUG_SCSI
|
888 |
{ |
889 |
int i;
|
890 |
for (i = 1; i < cmdlen; i++) { |
891 |
printf(" 0x%02x", buf[i]);
|
892 |
} |
893 |
printf("\n");
|
894 |
} |
895 |
#endif
|
896 |
|
897 |
if (scsi_req_parse(&r->req, buf) != 0) { |
898 |
BADF("Unsupported command length, command %x\n", command);
|
899 |
goto fail;
|
900 |
} |
901 |
assert(r->req.cmd.len == cmdlen); |
902 |
assert(r->req.cmd.lba == lba); |
903 |
|
904 |
if (lun || buf[1] >> 5) { |
905 |
/* Only LUN 0 supported. */
|
906 |
DPRINTF("Unimplemented LUN %d\n", lun ? lun : buf[1] >> 5); |
907 |
if (command != REQUEST_SENSE && command != INQUIRY)
|
908 |
goto fail;
|
909 |
} |
910 |
switch (command) {
|
911 |
case TEST_UNIT_READY:
|
912 |
case REQUEST_SENSE:
|
913 |
case INQUIRY:
|
914 |
case MODE_SENSE:
|
915 |
case MODE_SENSE_10:
|
916 |
case RESERVE:
|
917 |
case RESERVE_10:
|
918 |
case RELEASE:
|
919 |
case RELEASE_10:
|
920 |
case START_STOP:
|
921 |
case ALLOW_MEDIUM_REMOVAL:
|
922 |
case READ_CAPACITY:
|
923 |
case SYNCHRONIZE_CACHE:
|
924 |
case READ_TOC:
|
925 |
case GET_CONFIGURATION:
|
926 |
case SERVICE_ACTION_IN:
|
927 |
case REPORT_LUNS:
|
928 |
case VERIFY:
|
929 |
rc = scsi_disk_emulate_command(&r->req, outbuf); |
930 |
if (rc > 0) { |
931 |
r->iov.iov_len = rc; |
932 |
} else {
|
933 |
scsi_req_complete(&r->req); |
934 |
scsi_remove_request(r); |
935 |
return 0; |
936 |
} |
937 |
break;
|
938 |
case READ_6:
|
939 |
case READ_10:
|
940 |
case READ_12:
|
941 |
case READ_16:
|
942 |
DPRINTF("Read (sector %" PRId64 ", count %d)\n", lba, len); |
943 |
if (lba > s->max_lba)
|
944 |
goto illegal_lba;
|
945 |
r->sector = lba * s->cluster_size; |
946 |
r->sector_count = len * s->cluster_size; |
947 |
break;
|
948 |
case WRITE_6:
|
949 |
case WRITE_10:
|
950 |
case WRITE_12:
|
951 |
case WRITE_16:
|
952 |
DPRINTF("Write (sector %" PRId64 ", count %d)\n", lba, len); |
953 |
if (lba > s->max_lba)
|
954 |
goto illegal_lba;
|
955 |
r->sector = lba * s->cluster_size; |
956 |
r->sector_count = len * s->cluster_size; |
957 |
is_write = 1;
|
958 |
break;
|
959 |
default:
|
960 |
DPRINTF("Unknown SCSI command (%2.2x)\n", buf[0]); |
961 |
fail:
|
962 |
scsi_command_complete(r, CHECK_CONDITION, ILLEGAL_REQUEST); |
963 |
return 0; |
964 |
illegal_lba:
|
965 |
scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR); |
966 |
return 0; |
967 |
} |
968 |
if (r->sector_count == 0 && r->iov.iov_len == 0) { |
969 |
scsi_command_complete(r, GOOD, NO_SENSE); |
970 |
} |
971 |
len = r->sector_count * 512 + r->iov.iov_len;
|
972 |
if (is_write) {
|
973 |
return -len;
|
974 |
} else {
|
975 |
if (!r->sector_count)
|
976 |
r->sector_count = -1;
|
977 |
return len;
|
978 |
} |
979 |
} |
980 |
|
981 |
static void scsi_destroy(SCSIDevice *dev) |
982 |
{ |
983 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); |
984 |
SCSIDiskReq *r; |
985 |
|
986 |
while (!QTAILQ_EMPTY(&s->qdev.requests)) {
|
987 |
r = DO_UPCAST(SCSIDiskReq, req, QTAILQ_FIRST(&s->qdev.requests)); |
988 |
scsi_remove_request(r); |
989 |
} |
990 |
drive_uninit(s->qdev.dinfo); |
991 |
} |
992 |
|
993 |
static int scsi_disk_initfn(SCSIDevice *dev) |
994 |
{ |
995 |
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); |
996 |
uint64_t nb_sectors; |
997 |
|
998 |
if (!s->qdev.dinfo || !s->qdev.dinfo->bdrv) {
|
999 |
qemu_error("scsi-disk: drive property not set\n");
|
1000 |
return -1; |
1001 |
} |
1002 |
|
1003 |
if (bdrv_get_type_hint(s->qdev.dinfo->bdrv) == BDRV_TYPE_CDROM) {
|
1004 |
s->cluster_size = 4;
|
1005 |
} else {
|
1006 |
s->cluster_size = 1;
|
1007 |
} |
1008 |
s->qdev.blocksize = 512 * s->cluster_size;
|
1009 |
s->qdev.type = TYPE_DISK; |
1010 |
bdrv_get_geometry(s->qdev.dinfo->bdrv, &nb_sectors); |
1011 |
nb_sectors /= s->cluster_size; |
1012 |
if (nb_sectors)
|
1013 |
nb_sectors--; |
1014 |
s->max_lba = nb_sectors; |
1015 |
qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s); |
1016 |
return 0; |
1017 |
} |
1018 |
|
1019 |
static SCSIDeviceInfo scsi_disk_info = {
|
1020 |
.qdev.name = "scsi-disk",
|
1021 |
.qdev.desc = "virtual scsi disk or cdrom",
|
1022 |
.qdev.size = sizeof(SCSIDiskState),
|
1023 |
.init = scsi_disk_initfn, |
1024 |
.destroy = scsi_destroy, |
1025 |
.send_command = scsi_send_command, |
1026 |
.read_data = scsi_read_data, |
1027 |
.write_data = scsi_write_data, |
1028 |
.cancel_io = scsi_cancel_io, |
1029 |
.get_buf = scsi_get_buf, |
1030 |
.qdev.props = (Property[]) { |
1031 |
DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.dinfo),
|
1032 |
DEFINE_PROP_END_OF_LIST(), |
1033 |
}, |
1034 |
}; |
1035 |
|
1036 |
static void scsi_disk_register_devices(void) |
1037 |
{ |
1038 |
scsi_qdev_register(&scsi_disk_info); |
1039 |
} |
1040 |
device_init(scsi_disk_register_devices) |