root / hw / serial.c @ b6981cb5
History | View | Annotate | Download (26.9 kB)
1 |
/*
|
---|---|
2 |
* QEMU 16550A UART emulation
|
3 |
*
|
4 |
* Copyright (c) 2003-2004 Fabrice Bellard
|
5 |
* Copyright (c) 2008 Citrix Systems, Inc.
|
6 |
*
|
7 |
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
8 |
* of this software and associated documentation files (the "Software"), to deal
|
9 |
* in the Software without restriction, including without limitation the rights
|
10 |
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
11 |
* copies of the Software, and to permit persons to whom the Software is
|
12 |
* furnished to do so, subject to the following conditions:
|
13 |
*
|
14 |
* The above copyright notice and this permission notice shall be included in
|
15 |
* all copies or substantial portions of the Software.
|
16 |
*
|
17 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
18 |
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
19 |
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
20 |
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
21 |
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
22 |
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
23 |
* THE SOFTWARE.
|
24 |
*/
|
25 |
#include "hw.h" |
26 |
#include "qemu-char.h" |
27 |
#include "isa.h" |
28 |
#include "pc.h" |
29 |
#include "qemu-timer.h" |
30 |
|
31 |
//#define DEBUG_SERIAL
|
32 |
|
33 |
#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ |
34 |
|
35 |
#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ |
36 |
#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ |
37 |
#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ |
38 |
#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ |
39 |
|
40 |
#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ |
41 |
#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ |
42 |
|
43 |
#define UART_IIR_MSI 0x00 /* Modem status interrupt */ |
44 |
#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ |
45 |
#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ |
46 |
#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ |
47 |
#define UART_IIR_CTI 0x0C /* Character Timeout Indication */ |
48 |
|
49 |
#define UART_IIR_FENF 0x80 /* Fifo enabled, but not functionning */ |
50 |
#define UART_IIR_FE 0xC0 /* Fifo enabled */ |
51 |
|
52 |
/*
|
53 |
* These are the definitions for the Modem Control Register
|
54 |
*/
|
55 |
#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ |
56 |
#define UART_MCR_OUT2 0x08 /* Out2 complement */ |
57 |
#define UART_MCR_OUT1 0x04 /* Out1 complement */ |
58 |
#define UART_MCR_RTS 0x02 /* RTS complement */ |
59 |
#define UART_MCR_DTR 0x01 /* DTR complement */ |
60 |
|
61 |
/*
|
62 |
* These are the definitions for the Modem Status Register
|
63 |
*/
|
64 |
#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ |
65 |
#define UART_MSR_RI 0x40 /* Ring Indicator */ |
66 |
#define UART_MSR_DSR 0x20 /* Data Set Ready */ |
67 |
#define UART_MSR_CTS 0x10 /* Clear to Send */ |
68 |
#define UART_MSR_DDCD 0x08 /* Delta DCD */ |
69 |
#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ |
70 |
#define UART_MSR_DDSR 0x02 /* Delta DSR */ |
71 |
#define UART_MSR_DCTS 0x01 /* Delta CTS */ |
72 |
#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ |
73 |
|
74 |
#define UART_LSR_TEMT 0x40 /* Transmitter empty */ |
75 |
#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ |
76 |
#define UART_LSR_BI 0x10 /* Break interrupt indicator */ |
77 |
#define UART_LSR_FE 0x08 /* Frame error indicator */ |
78 |
#define UART_LSR_PE 0x04 /* Parity error indicator */ |
79 |
#define UART_LSR_OE 0x02 /* Overrun error indicator */ |
80 |
#define UART_LSR_DR 0x01 /* Receiver data ready */ |
81 |
#define UART_LSR_INT_ANY 0x1E /* Any of the lsr-interrupt-triggering status bits */ |
82 |
|
83 |
/* Interrupt trigger levels. The byte-counts are for 16550A - in newer UARTs the byte-count for each ITL is higher. */
|
84 |
|
85 |
#define UART_FCR_ITL_1 0x00 /* 1 byte ITL */ |
86 |
#define UART_FCR_ITL_2 0x40 /* 4 bytes ITL */ |
87 |
#define UART_FCR_ITL_3 0x80 /* 8 bytes ITL */ |
88 |
#define UART_FCR_ITL_4 0xC0 /* 14 bytes ITL */ |
89 |
|
90 |
#define UART_FCR_DMS 0x08 /* DMA Mode Select */ |
91 |
#define UART_FCR_XFR 0x04 /* XMIT Fifo Reset */ |
92 |
#define UART_FCR_RFR 0x02 /* RCVR Fifo Reset */ |
93 |
#define UART_FCR_FE 0x01 /* FIFO Enable */ |
94 |
|
95 |
#define UART_FIFO_LENGTH 16 /* 16550A Fifo Length */ |
96 |
|
97 |
#define XMIT_FIFO 0 |
98 |
#define RECV_FIFO 1 |
99 |
#define MAX_XMIT_RETRY 4 |
100 |
|
101 |
typedef struct SerialFIFO { |
102 |
uint8_t data[UART_FIFO_LENGTH]; |
103 |
uint8_t count; |
104 |
uint8_t itl; /* Interrupt Trigger Level */
|
105 |
uint8_t tail; |
106 |
uint8_t head; |
107 |
} SerialFIFO; |
108 |
|
109 |
struct SerialState {
|
110 |
uint16_t divider; |
111 |
uint8_t rbr; /* receive register */
|
112 |
uint8_t thr; /* transmit holding register */
|
113 |
uint8_t tsr; /* transmit shift register */
|
114 |
uint8_t ier; |
115 |
uint8_t iir; /* read only */
|
116 |
uint8_t lcr; |
117 |
uint8_t mcr; |
118 |
uint8_t lsr; /* read only */
|
119 |
uint8_t msr; /* read only */
|
120 |
uint8_t scr; |
121 |
uint8_t fcr; |
122 |
uint8_t fcr_vmstate; /* we can't write directly this value
|
123 |
it has side effects */
|
124 |
/* NOTE: this hidden state is necessary for tx irq generation as
|
125 |
it can be reset while reading iir */
|
126 |
int thr_ipending;
|
127 |
qemu_irq irq; |
128 |
CharDriverState *chr; |
129 |
int last_break_enable;
|
130 |
int it_shift;
|
131 |
int baudbase;
|
132 |
int tsr_retry;
|
133 |
|
134 |
uint64_t last_xmit_ts; /* Time when the last byte was successfully sent out of the tsr */
|
135 |
SerialFIFO recv_fifo; |
136 |
SerialFIFO xmit_fifo; |
137 |
|
138 |
struct QEMUTimer *fifo_timeout_timer;
|
139 |
int timeout_ipending; /* timeout interrupt pending state */ |
140 |
struct QEMUTimer *transmit_timer;
|
141 |
|
142 |
|
143 |
uint64_t char_transmit_time; /* time to transmit a char in ticks*/
|
144 |
int poll_msl;
|
145 |
|
146 |
struct QEMUTimer *modem_status_poll;
|
147 |
}; |
148 |
|
149 |
typedef struct ISASerialState { |
150 |
ISADevice dev; |
151 |
uint32_t index; |
152 |
uint32_t iobase; |
153 |
uint32_t isairq; |
154 |
SerialState state; |
155 |
} ISASerialState; |
156 |
|
157 |
static void serial_receive1(void *opaque, const uint8_t *buf, int size); |
158 |
|
159 |
static void fifo_clear(SerialState *s, int fifo) |
160 |
{ |
161 |
SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; |
162 |
memset(f->data, 0, UART_FIFO_LENGTH);
|
163 |
f->count = 0;
|
164 |
f->head = 0;
|
165 |
f->tail = 0;
|
166 |
} |
167 |
|
168 |
static int fifo_put(SerialState *s, int fifo, uint8_t chr) |
169 |
{ |
170 |
SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; |
171 |
|
172 |
f->data[f->head++] = chr; |
173 |
|
174 |
if (f->head == UART_FIFO_LENGTH)
|
175 |
f->head = 0;
|
176 |
f->count++; |
177 |
|
178 |
return 1; |
179 |
} |
180 |
|
181 |
static uint8_t fifo_get(SerialState *s, int fifo) |
182 |
{ |
183 |
SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo; |
184 |
uint8_t c; |
185 |
|
186 |
if(f->count == 0) |
187 |
return 0; |
188 |
|
189 |
c = f->data[f->tail++]; |
190 |
if (f->tail == UART_FIFO_LENGTH)
|
191 |
f->tail = 0;
|
192 |
f->count--; |
193 |
|
194 |
return c;
|
195 |
} |
196 |
|
197 |
static void serial_update_irq(SerialState *s) |
198 |
{ |
199 |
uint8_t tmp_iir = UART_IIR_NO_INT; |
200 |
|
201 |
if ((s->ier & UART_IER_RLSI) && (s->lsr & UART_LSR_INT_ANY)) {
|
202 |
tmp_iir = UART_IIR_RLSI; |
203 |
} else if ((s->ier & UART_IER_RDI) && s->timeout_ipending) { |
204 |
/* Note that(s->ier & UART_IER_RDI) can mask this interrupt,
|
205 |
* this is not in the specification but is observed on existing
|
206 |
* hardware. */
|
207 |
tmp_iir = UART_IIR_CTI; |
208 |
} else if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR) && |
209 |
(!(s->fcr & UART_FCR_FE) || |
210 |
s->recv_fifo.count >= s->recv_fifo.itl)) { |
211 |
tmp_iir = UART_IIR_RDI; |
212 |
} else if ((s->ier & UART_IER_THRI) && s->thr_ipending) { |
213 |
tmp_iir = UART_IIR_THRI; |
214 |
} else if ((s->ier & UART_IER_MSI) && (s->msr & UART_MSR_ANY_DELTA)) { |
215 |
tmp_iir = UART_IIR_MSI; |
216 |
} |
217 |
|
218 |
s->iir = tmp_iir | (s->iir & 0xF0);
|
219 |
|
220 |
if (tmp_iir != UART_IIR_NO_INT) {
|
221 |
qemu_irq_raise(s->irq); |
222 |
} else {
|
223 |
qemu_irq_lower(s->irq); |
224 |
} |
225 |
} |
226 |
|
227 |
static void serial_update_parameters(SerialState *s) |
228 |
{ |
229 |
int speed, parity, data_bits, stop_bits, frame_size;
|
230 |
QEMUSerialSetParams ssp; |
231 |
|
232 |
if (s->divider == 0) |
233 |
return;
|
234 |
|
235 |
/* Start bit. */
|
236 |
frame_size = 1;
|
237 |
if (s->lcr & 0x08) { |
238 |
/* Parity bit. */
|
239 |
frame_size++; |
240 |
if (s->lcr & 0x10) |
241 |
parity = 'E';
|
242 |
else
|
243 |
parity = 'O';
|
244 |
} else {
|
245 |
parity = 'N';
|
246 |
} |
247 |
if (s->lcr & 0x04) |
248 |
stop_bits = 2;
|
249 |
else
|
250 |
stop_bits = 1;
|
251 |
|
252 |
data_bits = (s->lcr & 0x03) + 5; |
253 |
frame_size += data_bits + stop_bits; |
254 |
speed = s->baudbase / s->divider; |
255 |
ssp.speed = speed; |
256 |
ssp.parity = parity; |
257 |
ssp.data_bits = data_bits; |
258 |
ssp.stop_bits = stop_bits; |
259 |
s->char_transmit_time = (get_ticks_per_sec() / speed) * frame_size; |
260 |
qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); |
261 |
#if 0
|
262 |
printf("speed=%d parity=%c data=%d stop=%d\n",
|
263 |
speed, parity, data_bits, stop_bits);
|
264 |
#endif
|
265 |
} |
266 |
|
267 |
static void serial_update_msl(SerialState *s) |
268 |
{ |
269 |
uint8_t omsr; |
270 |
int flags;
|
271 |
|
272 |
qemu_del_timer(s->modem_status_poll); |
273 |
|
274 |
if (qemu_chr_ioctl(s->chr,CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP) {
|
275 |
s->poll_msl = -1;
|
276 |
return;
|
277 |
} |
278 |
|
279 |
omsr = s->msr; |
280 |
|
281 |
s->msr = (flags & CHR_TIOCM_CTS) ? s->msr | UART_MSR_CTS : s->msr & ~UART_MSR_CTS; |
282 |
s->msr = (flags & CHR_TIOCM_DSR) ? s->msr | UART_MSR_DSR : s->msr & ~UART_MSR_DSR; |
283 |
s->msr = (flags & CHR_TIOCM_CAR) ? s->msr | UART_MSR_DCD : s->msr & ~UART_MSR_DCD; |
284 |
s->msr = (flags & CHR_TIOCM_RI) ? s->msr | UART_MSR_RI : s->msr & ~UART_MSR_RI; |
285 |
|
286 |
if (s->msr != omsr) {
|
287 |
/* Set delta bits */
|
288 |
s->msr = s->msr | ((s->msr >> 4) ^ (omsr >> 4)); |
289 |
/* UART_MSR_TERI only if change was from 1 -> 0 */
|
290 |
if ((s->msr & UART_MSR_TERI) && !(omsr & UART_MSR_RI))
|
291 |
s->msr &= ~UART_MSR_TERI; |
292 |
serial_update_irq(s); |
293 |
} |
294 |
|
295 |
/* The real 16550A apparently has a 250ns response latency to line status changes.
|
296 |
We'll be lazy and poll only every 10ms, and only poll it at all if MSI interrupts are turned on */
|
297 |
|
298 |
if (s->poll_msl)
|
299 |
qemu_mod_timer(s->modem_status_poll, qemu_get_clock(vm_clock) + get_ticks_per_sec() / 100);
|
300 |
} |
301 |
|
302 |
static void serial_xmit(void *opaque) |
303 |
{ |
304 |
SerialState *s = opaque; |
305 |
uint64_t new_xmit_ts = qemu_get_clock(vm_clock); |
306 |
|
307 |
if (s->tsr_retry <= 0) { |
308 |
if (s->fcr & UART_FCR_FE) {
|
309 |
s->tsr = fifo_get(s,XMIT_FIFO); |
310 |
if (!s->xmit_fifo.count)
|
311 |
s->lsr |= UART_LSR_THRE; |
312 |
} else {
|
313 |
s->tsr = s->thr; |
314 |
s->lsr |= UART_LSR_THRE; |
315 |
} |
316 |
} |
317 |
|
318 |
if (s->mcr & UART_MCR_LOOP) {
|
319 |
/* in loopback mode, say that we just received a char */
|
320 |
serial_receive1(s, &s->tsr, 1);
|
321 |
} else if (qemu_chr_write(s->chr, &s->tsr, 1) != 1) { |
322 |
if ((s->tsr_retry > 0) && (s->tsr_retry <= MAX_XMIT_RETRY)) { |
323 |
s->tsr_retry++; |
324 |
qemu_mod_timer(s->transmit_timer, new_xmit_ts + s->char_transmit_time); |
325 |
return;
|
326 |
} else if (s->poll_msl < 0) { |
327 |
/* If we exceed MAX_XMIT_RETRY and the backend is not a real serial port, then
|
328 |
drop any further failed writes instantly, until we get one that goes through.
|
329 |
This is to prevent guests that log to unconnected pipes or pty's from stalling. */
|
330 |
s->tsr_retry = -1;
|
331 |
} |
332 |
} |
333 |
else {
|
334 |
s->tsr_retry = 0;
|
335 |
} |
336 |
|
337 |
s->last_xmit_ts = qemu_get_clock(vm_clock); |
338 |
if (!(s->lsr & UART_LSR_THRE))
|
339 |
qemu_mod_timer(s->transmit_timer, s->last_xmit_ts + s->char_transmit_time); |
340 |
|
341 |
if (s->lsr & UART_LSR_THRE) {
|
342 |
s->lsr |= UART_LSR_TEMT; |
343 |
s->thr_ipending = 1;
|
344 |
serial_update_irq(s); |
345 |
} |
346 |
} |
347 |
|
348 |
|
349 |
static void serial_ioport_write(void *opaque, uint32_t addr, uint32_t val) |
350 |
{ |
351 |
SerialState *s = opaque; |
352 |
|
353 |
addr &= 7;
|
354 |
#ifdef DEBUG_SERIAL
|
355 |
printf("serial: write addr=0x%02x val=0x%02x\n", addr, val);
|
356 |
#endif
|
357 |
switch(addr) {
|
358 |
default:
|
359 |
case 0: |
360 |
if (s->lcr & UART_LCR_DLAB) {
|
361 |
s->divider = (s->divider & 0xff00) | val;
|
362 |
serial_update_parameters(s); |
363 |
} else {
|
364 |
s->thr = (uint8_t) val; |
365 |
if(s->fcr & UART_FCR_FE) {
|
366 |
fifo_put(s, XMIT_FIFO, s->thr); |
367 |
s->thr_ipending = 0;
|
368 |
s->lsr &= ~UART_LSR_TEMT; |
369 |
s->lsr &= ~UART_LSR_THRE; |
370 |
serial_update_irq(s); |
371 |
} else {
|
372 |
s->thr_ipending = 0;
|
373 |
s->lsr &= ~UART_LSR_THRE; |
374 |
serial_update_irq(s); |
375 |
} |
376 |
serial_xmit(s); |
377 |
} |
378 |
break;
|
379 |
case 1: |
380 |
if (s->lcr & UART_LCR_DLAB) {
|
381 |
s->divider = (s->divider & 0x00ff) | (val << 8); |
382 |
serial_update_parameters(s); |
383 |
} else {
|
384 |
s->ier = val & 0x0f;
|
385 |
/* If the backend device is a real serial port, turn polling of the modem
|
386 |
status lines on physical port on or off depending on UART_IER_MSI state */
|
387 |
if (s->poll_msl >= 0) { |
388 |
if (s->ier & UART_IER_MSI) {
|
389 |
s->poll_msl = 1;
|
390 |
serial_update_msl(s); |
391 |
} else {
|
392 |
qemu_del_timer(s->modem_status_poll); |
393 |
s->poll_msl = 0;
|
394 |
} |
395 |
} |
396 |
if (s->lsr & UART_LSR_THRE) {
|
397 |
s->thr_ipending = 1;
|
398 |
serial_update_irq(s); |
399 |
} |
400 |
} |
401 |
break;
|
402 |
case 2: |
403 |
val = val & 0xFF;
|
404 |
|
405 |
if (s->fcr == val)
|
406 |
break;
|
407 |
|
408 |
/* Did the enable/disable flag change? If so, make sure FIFOs get flushed */
|
409 |
if ((val ^ s->fcr) & UART_FCR_FE)
|
410 |
val |= UART_FCR_XFR | UART_FCR_RFR; |
411 |
|
412 |
/* FIFO clear */
|
413 |
|
414 |
if (val & UART_FCR_RFR) {
|
415 |
qemu_del_timer(s->fifo_timeout_timer); |
416 |
s->timeout_ipending=0;
|
417 |
fifo_clear(s,RECV_FIFO); |
418 |
} |
419 |
|
420 |
if (val & UART_FCR_XFR) {
|
421 |
fifo_clear(s,XMIT_FIFO); |
422 |
} |
423 |
|
424 |
if (val & UART_FCR_FE) {
|
425 |
s->iir |= UART_IIR_FE; |
426 |
/* Set RECV_FIFO trigger Level */
|
427 |
switch (val & 0xC0) { |
428 |
case UART_FCR_ITL_1:
|
429 |
s->recv_fifo.itl = 1;
|
430 |
break;
|
431 |
case UART_FCR_ITL_2:
|
432 |
s->recv_fifo.itl = 4;
|
433 |
break;
|
434 |
case UART_FCR_ITL_3:
|
435 |
s->recv_fifo.itl = 8;
|
436 |
break;
|
437 |
case UART_FCR_ITL_4:
|
438 |
s->recv_fifo.itl = 14;
|
439 |
break;
|
440 |
} |
441 |
} else
|
442 |
s->iir &= ~UART_IIR_FE; |
443 |
|
444 |
/* Set fcr - or at least the bits in it that are supposed to "stick" */
|
445 |
s->fcr = val & 0xC9;
|
446 |
serial_update_irq(s); |
447 |
break;
|
448 |
case 3: |
449 |
{ |
450 |
int break_enable;
|
451 |
s->lcr = val; |
452 |
serial_update_parameters(s); |
453 |
break_enable = (val >> 6) & 1; |
454 |
if (break_enable != s->last_break_enable) {
|
455 |
s->last_break_enable = break_enable; |
456 |
qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_BREAK, |
457 |
&break_enable); |
458 |
} |
459 |
} |
460 |
break;
|
461 |
case 4: |
462 |
{ |
463 |
int flags;
|
464 |
int old_mcr = s->mcr;
|
465 |
s->mcr = val & 0x1f;
|
466 |
if (val & UART_MCR_LOOP)
|
467 |
break;
|
468 |
|
469 |
if (s->poll_msl >= 0 && old_mcr != s->mcr) { |
470 |
|
471 |
qemu_chr_ioctl(s->chr,CHR_IOCTL_SERIAL_GET_TIOCM, &flags); |
472 |
|
473 |
flags &= ~(CHR_TIOCM_RTS | CHR_TIOCM_DTR); |
474 |
|
475 |
if (val & UART_MCR_RTS)
|
476 |
flags |= CHR_TIOCM_RTS; |
477 |
if (val & UART_MCR_DTR)
|
478 |
flags |= CHR_TIOCM_DTR; |
479 |
|
480 |
qemu_chr_ioctl(s->chr,CHR_IOCTL_SERIAL_SET_TIOCM, &flags); |
481 |
/* Update the modem status after a one-character-send wait-time, since there may be a response
|
482 |
from the device/computer at the other end of the serial line */
|
483 |
qemu_mod_timer(s->modem_status_poll, qemu_get_clock(vm_clock) + s->char_transmit_time); |
484 |
} |
485 |
} |
486 |
break;
|
487 |
case 5: |
488 |
break;
|
489 |
case 6: |
490 |
break;
|
491 |
case 7: |
492 |
s->scr = val; |
493 |
break;
|
494 |
} |
495 |
} |
496 |
|
497 |
static uint32_t serial_ioport_read(void *opaque, uint32_t addr) |
498 |
{ |
499 |
SerialState *s = opaque; |
500 |
uint32_t ret; |
501 |
|
502 |
addr &= 7;
|
503 |
switch(addr) {
|
504 |
default:
|
505 |
case 0: |
506 |
if (s->lcr & UART_LCR_DLAB) {
|
507 |
ret = s->divider & 0xff;
|
508 |
} else {
|
509 |
if(s->fcr & UART_FCR_FE) {
|
510 |
ret = fifo_get(s,RECV_FIFO); |
511 |
if (s->recv_fifo.count == 0) |
512 |
s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); |
513 |
else
|
514 |
qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock (vm_clock) + s->char_transmit_time * 4);
|
515 |
s->timeout_ipending = 0;
|
516 |
} else {
|
517 |
ret = s->rbr; |
518 |
s->lsr &= ~(UART_LSR_DR | UART_LSR_BI); |
519 |
} |
520 |
serial_update_irq(s); |
521 |
if (!(s->mcr & UART_MCR_LOOP)) {
|
522 |
/* in loopback mode, don't receive any data */
|
523 |
qemu_chr_accept_input(s->chr); |
524 |
} |
525 |
} |
526 |
break;
|
527 |
case 1: |
528 |
if (s->lcr & UART_LCR_DLAB) {
|
529 |
ret = (s->divider >> 8) & 0xff; |
530 |
} else {
|
531 |
ret = s->ier; |
532 |
} |
533 |
break;
|
534 |
case 2: |
535 |
ret = s->iir; |
536 |
s->thr_ipending = 0;
|
537 |
serial_update_irq(s); |
538 |
break;
|
539 |
case 3: |
540 |
ret = s->lcr; |
541 |
break;
|
542 |
case 4: |
543 |
ret = s->mcr; |
544 |
break;
|
545 |
case 5: |
546 |
ret = s->lsr; |
547 |
/* Clear break interrupt */
|
548 |
if (s->lsr & UART_LSR_BI) {
|
549 |
s->lsr &= ~UART_LSR_BI; |
550 |
serial_update_irq(s); |
551 |
} |
552 |
break;
|
553 |
case 6: |
554 |
if (s->mcr & UART_MCR_LOOP) {
|
555 |
/* in loopback, the modem output pins are connected to the
|
556 |
inputs */
|
557 |
ret = (s->mcr & 0x0c) << 4; |
558 |
ret |= (s->mcr & 0x02) << 3; |
559 |
ret |= (s->mcr & 0x01) << 5; |
560 |
} else {
|
561 |
if (s->poll_msl >= 0) |
562 |
serial_update_msl(s); |
563 |
ret = s->msr; |
564 |
/* Clear delta bits & msr int after read, if they were set */
|
565 |
if (s->msr & UART_MSR_ANY_DELTA) {
|
566 |
s->msr &= 0xF0;
|
567 |
serial_update_irq(s); |
568 |
} |
569 |
} |
570 |
break;
|
571 |
case 7: |
572 |
ret = s->scr; |
573 |
break;
|
574 |
} |
575 |
#ifdef DEBUG_SERIAL
|
576 |
printf("serial: read addr=0x%02x val=0x%02x\n", addr, ret);
|
577 |
#endif
|
578 |
return ret;
|
579 |
} |
580 |
|
581 |
static int serial_can_receive(SerialState *s) |
582 |
{ |
583 |
if(s->fcr & UART_FCR_FE) {
|
584 |
if(s->recv_fifo.count < UART_FIFO_LENGTH)
|
585 |
/* Advertise (fifo.itl - fifo.count) bytes when count < ITL, and 1 if above. If UART_FIFO_LENGTH - fifo.count is
|
586 |
advertised the effect will be to almost always fill the fifo completely before the guest has a chance to respond,
|
587 |
effectively overriding the ITL that the guest has set. */
|
588 |
return (s->recv_fifo.count <= s->recv_fifo.itl) ? s->recv_fifo.itl - s->recv_fifo.count : 1; |
589 |
else
|
590 |
return 0; |
591 |
} else {
|
592 |
return !(s->lsr & UART_LSR_DR);
|
593 |
} |
594 |
} |
595 |
|
596 |
static void serial_receive_break(SerialState *s) |
597 |
{ |
598 |
s->rbr = 0;
|
599 |
/* When the LSR_DR is set a null byte is pushed into the fifo */
|
600 |
fifo_put(s, RECV_FIFO, '\0');
|
601 |
s->lsr |= UART_LSR_BI | UART_LSR_DR; |
602 |
serial_update_irq(s); |
603 |
} |
604 |
|
605 |
/* There's data in recv_fifo and s->rbr has not been read for 4 char transmit times */
|
606 |
static void fifo_timeout_int (void *opaque) { |
607 |
SerialState *s = opaque; |
608 |
if (s->recv_fifo.count) {
|
609 |
s->timeout_ipending = 1;
|
610 |
serial_update_irq(s); |
611 |
} |
612 |
} |
613 |
|
614 |
static int serial_can_receive1(void *opaque) |
615 |
{ |
616 |
SerialState *s = opaque; |
617 |
return serial_can_receive(s);
|
618 |
} |
619 |
|
620 |
static void serial_receive1(void *opaque, const uint8_t *buf, int size) |
621 |
{ |
622 |
SerialState *s = opaque; |
623 |
if(s->fcr & UART_FCR_FE) {
|
624 |
int i;
|
625 |
for (i = 0; i < size; i++) { |
626 |
fifo_put(s, RECV_FIFO, buf[i]); |
627 |
} |
628 |
s->lsr |= UART_LSR_DR; |
629 |
/* call the timeout receive callback in 4 char transmit time */
|
630 |
qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock (vm_clock) + s->char_transmit_time * 4);
|
631 |
} else {
|
632 |
s->rbr = buf[0];
|
633 |
s->lsr |= UART_LSR_DR; |
634 |
} |
635 |
serial_update_irq(s); |
636 |
} |
637 |
|
638 |
static void serial_event(void *opaque, int event) |
639 |
{ |
640 |
SerialState *s = opaque; |
641 |
#ifdef DEBUG_SERIAL
|
642 |
printf("serial: event %x\n", event);
|
643 |
#endif
|
644 |
if (event == CHR_EVENT_BREAK)
|
645 |
serial_receive_break(s); |
646 |
} |
647 |
|
648 |
static void serial_pre_save(void *opaque) |
649 |
{ |
650 |
SerialState *s = opaque; |
651 |
s->fcr_vmstate = s->fcr; |
652 |
} |
653 |
|
654 |
static int serial_post_load(void *opaque, int version_id) |
655 |
{ |
656 |
SerialState *s = opaque; |
657 |
|
658 |
if (version_id < 3) { |
659 |
s->fcr_vmstate = 0;
|
660 |
} |
661 |
/* Initialize fcr via setter to perform essential side-effects */
|
662 |
serial_ioport_write(s, 0x02, s->fcr_vmstate);
|
663 |
return 0; |
664 |
} |
665 |
|
666 |
static const VMStateDescription vmstate_serial = { |
667 |
.name = "serial",
|
668 |
.version_id = 3,
|
669 |
.minimum_version_id = 2,
|
670 |
.pre_save = serial_pre_save, |
671 |
.post_load = serial_post_load, |
672 |
.fields = (VMStateField []) { |
673 |
VMSTATE_UINT16_V(divider, SerialState, 2),
|
674 |
VMSTATE_UINT8(rbr, SerialState), |
675 |
VMSTATE_UINT8(ier, SerialState), |
676 |
VMSTATE_UINT8(iir, SerialState), |
677 |
VMSTATE_UINT8(lcr, SerialState), |
678 |
VMSTATE_UINT8(mcr, SerialState), |
679 |
VMSTATE_UINT8(lsr, SerialState), |
680 |
VMSTATE_UINT8(msr, SerialState), |
681 |
VMSTATE_UINT8(scr, SerialState), |
682 |
VMSTATE_UINT8_V(fcr_vmstate, SerialState, 3),
|
683 |
VMSTATE_END_OF_LIST() |
684 |
} |
685 |
}; |
686 |
|
687 |
static void serial_reset(void *opaque) |
688 |
{ |
689 |
SerialState *s = opaque; |
690 |
|
691 |
s->rbr = 0;
|
692 |
s->ier = 0;
|
693 |
s->iir = UART_IIR_NO_INT; |
694 |
s->lcr = 0;
|
695 |
s->lsr = UART_LSR_TEMT | UART_LSR_THRE; |
696 |
s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS; |
697 |
/* Default to 9600 baud, 1 start bit, 8 data bits, 1 stop bit, no parity. */
|
698 |
s->divider = 0x0C;
|
699 |
s->mcr = UART_MCR_OUT2; |
700 |
s->scr = 0;
|
701 |
s->tsr_retry = 0;
|
702 |
s->char_transmit_time = (get_ticks_per_sec() / 9600) * 10; |
703 |
s->poll_msl = 0;
|
704 |
|
705 |
fifo_clear(s,RECV_FIFO); |
706 |
fifo_clear(s,XMIT_FIFO); |
707 |
|
708 |
s->last_xmit_ts = qemu_get_clock(vm_clock); |
709 |
|
710 |
s->thr_ipending = 0;
|
711 |
s->last_break_enable = 0;
|
712 |
qemu_irq_lower(s->irq); |
713 |
} |
714 |
|
715 |
static void serial_init_core(SerialState *s) |
716 |
{ |
717 |
if (!s->chr) {
|
718 |
fprintf(stderr, "Can't create serial device, empty char device\n");
|
719 |
exit(1);
|
720 |
} |
721 |
|
722 |
s->modem_status_poll = qemu_new_timer(vm_clock, (QEMUTimerCB *) serial_update_msl, s); |
723 |
|
724 |
s->fifo_timeout_timer = qemu_new_timer(vm_clock, (QEMUTimerCB *) fifo_timeout_int, s); |
725 |
s->transmit_timer = qemu_new_timer(vm_clock, (QEMUTimerCB *) serial_xmit, s); |
726 |
|
727 |
qemu_register_reset(serial_reset, s); |
728 |
|
729 |
qemu_chr_add_handlers(s->chr, serial_can_receive1, serial_receive1, |
730 |
serial_event, s); |
731 |
} |
732 |
|
733 |
/* Change the main reference oscillator frequency. */
|
734 |
void serial_set_frequency(SerialState *s, uint32_t frequency)
|
735 |
{ |
736 |
s->baudbase = frequency; |
737 |
serial_update_parameters(s); |
738 |
} |
739 |
|
740 |
static const int isa_serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; |
741 |
static const int isa_serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 }; |
742 |
|
743 |
static int serial_isa_initfn(ISADevice *dev) |
744 |
{ |
745 |
static int index; |
746 |
ISASerialState *isa = DO_UPCAST(ISASerialState, dev, dev); |
747 |
SerialState *s = &isa->state; |
748 |
|
749 |
if (isa->index == -1) |
750 |
isa->index = index; |
751 |
if (isa->index >= MAX_SERIAL_PORTS)
|
752 |
return -1; |
753 |
if (isa->iobase == -1) |
754 |
isa->iobase = isa_serial_io[isa->index]; |
755 |
if (isa->isairq == -1) |
756 |
isa->isairq = isa_serial_irq[isa->index]; |
757 |
index++; |
758 |
|
759 |
s->baudbase = 115200;
|
760 |
isa_init_irq(dev, &s->irq, isa->isairq); |
761 |
serial_init_core(s); |
762 |
vmstate_register(isa->iobase, &vmstate_serial, s); |
763 |
|
764 |
register_ioport_write(isa->iobase, 8, 1, serial_ioport_write, s); |
765 |
register_ioport_read(isa->iobase, 8, 1, serial_ioport_read, s); |
766 |
return 0; |
767 |
} |
768 |
|
769 |
SerialState *serial_isa_init(int index, CharDriverState *chr)
|
770 |
{ |
771 |
ISADevice *dev; |
772 |
|
773 |
dev = isa_create("isa-serial");
|
774 |
qdev_prop_set_uint32(&dev->qdev, "index", index);
|
775 |
qdev_prop_set_chr(&dev->qdev, "chardev", chr);
|
776 |
if (qdev_init(&dev->qdev) < 0) |
777 |
return NULL; |
778 |
return &DO_UPCAST(ISASerialState, dev, dev)->state;
|
779 |
} |
780 |
|
781 |
SerialState *serial_init(int base, qemu_irq irq, int baudbase, |
782 |
CharDriverState *chr) |
783 |
{ |
784 |
SerialState *s; |
785 |
|
786 |
s = qemu_mallocz(sizeof(SerialState));
|
787 |
|
788 |
s->irq = irq; |
789 |
s->baudbase = baudbase; |
790 |
s->chr = chr; |
791 |
serial_init_core(s); |
792 |
|
793 |
vmstate_register(base, &vmstate_serial, s); |
794 |
|
795 |
register_ioport_write(base, 8, 1, serial_ioport_write, s); |
796 |
register_ioport_read(base, 8, 1, serial_ioport_read, s); |
797 |
return s;
|
798 |
} |
799 |
|
800 |
/* Memory mapped interface */
|
801 |
static uint32_t serial_mm_readb(void *opaque, target_phys_addr_t addr) |
802 |
{ |
803 |
SerialState *s = opaque; |
804 |
|
805 |
return serial_ioport_read(s, addr >> s->it_shift) & 0xFF; |
806 |
} |
807 |
|
808 |
static void serial_mm_writeb(void *opaque, target_phys_addr_t addr, |
809 |
uint32_t value) |
810 |
{ |
811 |
SerialState *s = opaque; |
812 |
|
813 |
serial_ioport_write(s, addr >> s->it_shift, value & 0xFF);
|
814 |
} |
815 |
|
816 |
static uint32_t serial_mm_readw(void *opaque, target_phys_addr_t addr) |
817 |
{ |
818 |
SerialState *s = opaque; |
819 |
uint32_t val; |
820 |
|
821 |
val = serial_ioport_read(s, addr >> s->it_shift) & 0xFFFF;
|
822 |
#ifdef TARGET_WORDS_BIGENDIAN
|
823 |
val = bswap16(val); |
824 |
#endif
|
825 |
return val;
|
826 |
} |
827 |
|
828 |
static void serial_mm_writew(void *opaque, target_phys_addr_t addr, |
829 |
uint32_t value) |
830 |
{ |
831 |
SerialState *s = opaque; |
832 |
#ifdef TARGET_WORDS_BIGENDIAN
|
833 |
value = bswap16(value); |
834 |
#endif
|
835 |
serial_ioport_write(s, addr >> s->it_shift, value & 0xFFFF);
|
836 |
} |
837 |
|
838 |
static uint32_t serial_mm_readl(void *opaque, target_phys_addr_t addr) |
839 |
{ |
840 |
SerialState *s = opaque; |
841 |
uint32_t val; |
842 |
|
843 |
val = serial_ioport_read(s, addr >> s->it_shift); |
844 |
#ifdef TARGET_WORDS_BIGENDIAN
|
845 |
val = bswap32(val); |
846 |
#endif
|
847 |
return val;
|
848 |
} |
849 |
|
850 |
static void serial_mm_writel(void *opaque, target_phys_addr_t addr, |
851 |
uint32_t value) |
852 |
{ |
853 |
SerialState *s = opaque; |
854 |
#ifdef TARGET_WORDS_BIGENDIAN
|
855 |
value = bswap32(value); |
856 |
#endif
|
857 |
serial_ioport_write(s, addr >> s->it_shift, value); |
858 |
} |
859 |
|
860 |
static CPUReadMemoryFunc * const serial_mm_read[] = { |
861 |
&serial_mm_readb, |
862 |
&serial_mm_readw, |
863 |
&serial_mm_readl, |
864 |
}; |
865 |
|
866 |
static CPUWriteMemoryFunc * const serial_mm_write[] = { |
867 |
&serial_mm_writeb, |
868 |
&serial_mm_writew, |
869 |
&serial_mm_writel, |
870 |
}; |
871 |
|
872 |
SerialState *serial_mm_init (target_phys_addr_t base, int it_shift,
|
873 |
qemu_irq irq, int baudbase,
|
874 |
CharDriverState *chr, int ioregister)
|
875 |
{ |
876 |
SerialState *s; |
877 |
int s_io_memory;
|
878 |
|
879 |
s = qemu_mallocz(sizeof(SerialState));
|
880 |
|
881 |
s->it_shift = it_shift; |
882 |
s->irq = irq; |
883 |
s->baudbase = baudbase; |
884 |
s->chr = chr; |
885 |
|
886 |
serial_init_core(s); |
887 |
vmstate_register(base, &vmstate_serial, s); |
888 |
|
889 |
if (ioregister) {
|
890 |
s_io_memory = cpu_register_io_memory(serial_mm_read, |
891 |
serial_mm_write, s); |
892 |
cpu_register_physical_memory(base, 8 << it_shift, s_io_memory);
|
893 |
} |
894 |
serial_update_msl(s); |
895 |
return s;
|
896 |
} |
897 |
|
898 |
static ISADeviceInfo serial_isa_info = {
|
899 |
.qdev.name = "isa-serial",
|
900 |
.qdev.size = sizeof(ISASerialState),
|
901 |
.init = serial_isa_initfn, |
902 |
.qdev.props = (Property[]) { |
903 |
DEFINE_PROP_UINT32("index", ISASerialState, index, -1), |
904 |
DEFINE_PROP_HEX32("iobase", ISASerialState, iobase, -1), |
905 |
DEFINE_PROP_UINT32("irq", ISASerialState, isairq, -1), |
906 |
DEFINE_PROP_CHR("chardev", ISASerialState, state.chr),
|
907 |
DEFINE_PROP_END_OF_LIST(), |
908 |
}, |
909 |
}; |
910 |
|
911 |
static void serial_register_devices(void) |
912 |
{ |
913 |
isa_qdev_register(&serial_isa_info); |
914 |
} |
915 |
|
916 |
device_init(serial_register_devices) |