Archipelago » qemu

/*

 * PXA270-based Clamshell PDA platforms.

 *

 * Copyright (c) 2006 Openedhand Ltd.

 * Written by Andrzej Zaborowski <balrog@zabor.org>

 *

 * This code is licensed under the GNU GPL v2.

 *

 * Contributions after 2012-01-13 are licensed under the terms of the

 * GNU GPL, version 2 or (at your option) any later version.

 */

#include "hw.h"

#include "pxa.h"

#include "arm-misc.h"

#include "sysemu.h"

#include "pcmcia.h"

#include "i2c.h"

#include "ssi.h"

#include "flash.h"

#include "qemu-timer.h"

#include "devices.h"

#include "sharpsl.h"

#include "console.h"

#include "block.h"

#include "audio/audio.h"

#include "boards.h"

#include "blockdev.h"

#include "sysbus.h"

#include "exec-memory.h"

#undef REG_FMT

#define REG_FMT                        "0x%02lx"

/* Spitz Flash */

#define FLASH_BASE                0x0c000000

#define FLASH_ECCLPLB                0x00        /* Line parity 7 - 0 bit */

#define FLASH_ECCLPUB                0x04        /* Line parity 15 - 8 bit */

#define FLASH_ECCCP                0x08        /* Column parity 5 - 0 bit */

#define FLASH_ECCCNTR                0x0c        /* ECC byte counter */

#define FLASH_ECCCLRR                0x10        /* Clear ECC */

#define FLASH_FLASHIO                0x14        /* Flash I/O */

#define FLASH_FLASHCTL                0x18        /* Flash Control */

#define FLASHCTL_CE0                (1 << 0)

#define FLASHCTL_CLE                (1 << 1)

#define FLASHCTL_ALE                (1 << 2)

#define FLASHCTL_WP                (1 << 3)

#define FLASHCTL_CE1                (1 << 4)

#define FLASHCTL_RYBY                (1 << 5)

#define FLASHCTL_NCE                (FLASHCTL_CE0 | FLASHCTL_CE1)

typedef struct {

    SysBusDevice busdev;

    MemoryRegion iomem;

    DeviceState *nand;

    uint8_t ctl;

    uint8_t manf_id;

    uint8_t chip_id;

    ECCState ecc;

} SLNANDState;

static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size)

{

    SLNANDState *s = (SLNANDState *) opaque;

    int ryby;

    switch (addr) {

#define BSHR(byte, from, to)        ((s->ecc.lp[byte] >> (from - to)) & (1 << to))

    case FLASH_ECCLPLB:

        return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) |

                BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7);

#define BSHL(byte, from, to)        ((s->ecc.lp[byte] << (to - from)) & (1 << to))

    case FLASH_ECCLPUB:

        return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) |

                BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7);

    case FLASH_ECCCP:

        return s->ecc.cp;

    case FLASH_ECCCNTR:

        return s->ecc.count & 0xff;

    case FLASH_FLASHCTL:

        nand_getpins(s->nand, &ryby);

        if (ryby)

            return s->ctl | FLASHCTL_RYBY;

        else

            return s->ctl;

    case FLASH_FLASHIO:

        if (size == 4) {

            return ecc_digest(&s->ecc, nand_getio(s->nand)) |

                (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16);

        }

        return ecc_digest(&s->ecc, nand_getio(s->nand));

    default:

        zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr);

    }

    return 0;

}

static void sl_write(void *opaque, hwaddr addr,

                     uint64_t value, unsigned size)

{

    SLNANDState *s = (SLNANDState *) opaque;

    switch (addr) {

    case FLASH_ECCCLRR:

        /* Value is ignored.  */

        ecc_reset(&s->ecc);

        break;

    case FLASH_FLASHCTL:

        s->ctl = value & 0xff & ~FLASHCTL_RYBY;

        nand_setpins(s->nand,

                        s->ctl & FLASHCTL_CLE,

                        s->ctl & FLASHCTL_ALE,

                        s->ctl & FLASHCTL_NCE,

                        s->ctl & FLASHCTL_WP,

                        0);

        break;

    case FLASH_FLASHIO:

        nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff));

        break;

    default:

        zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr);

    }

}

enum {

    FLASH_128M,

    FLASH_1024M,

};

static const MemoryRegionOps sl_ops = {

    .read = sl_read,

    .write = sl_write,

    .endianness = DEVICE_NATIVE_ENDIAN,

};

static void sl_flash_register(PXA2xxState *cpu, int size)

{

    DeviceState *dev;

    dev = qdev_create(NULL, "sl-nand");

    qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG);

    if (size == FLASH_128M)

        qdev_prop_set_uint8(dev, "chip_id", 0x73);

    else if (size == FLASH_1024M)

        qdev_prop_set_uint8(dev, "chip_id", 0xf1);

    qdev_init_nofail(dev);

    sysbus_mmio_map(sysbus_from_qdev(dev), 0, FLASH_BASE);

}

static int sl_nand_init(SysBusDevice *dev) {

    SLNANDState *s;

    DriveInfo *nand;

    s = FROM_SYSBUS(SLNANDState, dev);

    s->ctl = 0;

    nand = drive_get(IF_MTD, 0, 0);

    s->nand = nand_init(nand ? nand->bdrv : NULL, s->manf_id, s->chip_id);

    memory_region_init_io(&s->iomem, &sl_ops, s, "sl", 0x40);

    sysbus_init_mmio(dev, &s->iomem);

    return 0;

}

/* Spitz Keyboard */

#define SPITZ_KEY_STROBE_NUM        11

#define SPITZ_KEY_SENSE_NUM        7

static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = {

    12, 17, 91, 34, 36, 38, 39

};

static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = {

    88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114

};

/* Eighth additional row maps the special keys */

static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = {

    { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 },

    {  -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 },

    { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25,  -1 ,  -1 ,  -1  },

    { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26,  -1 , 0x36,  -1  },

    { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34,  -1 , 0x1c, 0x2a,  -1  },

    { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33,  -1 , 0x48,  -1 ,  -1 , 0x38 },

    { 0x37, 0x3d,  -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d,  -1 ,  -1  },

    { 0x52, 0x43, 0x01, 0x47, 0x49,  -1 ,  -1 ,  -1 ,  -1 ,  -1 ,  -1  },

};

#define SPITZ_GPIO_AK_INT        13        /* Remote control */

#define SPITZ_GPIO_SYNC                16        /* Sync button */

#define SPITZ_GPIO_ON_KEY        95        /* Power button */

#define SPITZ_GPIO_SWA                97        /* Lid */

#define SPITZ_GPIO_SWB                96        /* Tablet mode */

/* The special buttons are mapped to unused keys */

static const int spitz_gpiomap[5] = {

    SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY,

    SPITZ_GPIO_SWA, SPITZ_GPIO_SWB,

};

typedef struct {

    SysBusDevice busdev;

    qemu_irq sense[SPITZ_KEY_SENSE_NUM];

    qemu_irq gpiomap[5];

    int keymap[0x80];

    uint16_t keyrow[SPITZ_KEY_SENSE_NUM];

    uint16_t strobe_state;

    uint16_t sense_state;

    uint16_t pre_map[0x100];

    uint16_t modifiers;

    uint16_t imodifiers;

    uint8_t fifo[16];

    int fifopos, fifolen;

    QEMUTimer *kbdtimer;

} SpitzKeyboardState;

static void spitz_keyboard_sense_update(SpitzKeyboardState *s)

{

    int i;

    uint16_t strobe, sense = 0;

    for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) {

        strobe = s->keyrow[i] & s->strobe_state;

        if (strobe) {

            sense |= 1 << i;

            if (!(s->sense_state & (1 << i)))

                qemu_irq_raise(s->sense[i]);

        } else if (s->sense_state & (1 << i))

            qemu_irq_lower(s->sense[i]);

    }

    s->sense_state = sense;

}

static void spitz_keyboard_strobe(void *opaque, int line, int level)

{

    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;

    if (level)

        s->strobe_state |= 1 << line;

    else

        s->strobe_state &= ~(1 << line);

    spitz_keyboard_sense_update(s);

}

static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode)

{

    int spitz_keycode = s->keymap[keycode & 0x7f];

    if (spitz_keycode == -1)

        return;

    /* Handle the additional keys */

    if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) {

        qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80));

        return;

    }

    if (keycode & 0x80)

        s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf));

    else

        s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf);

    spitz_keyboard_sense_update(s);

}

#define SHIFT        (1 << 7)

#define CTRL        (1 << 8)

#define FN        (1 << 9)

#define QUEUE_KEY(c)        s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c

static void spitz_keyboard_handler(void *opaque, int keycode)

{

    SpitzKeyboardState *s = opaque;

    uint16_t code;

    int mapcode;

    switch (keycode) {

    case 0x2a:        /* Left Shift */

        s->modifiers |= 1;

        break;

    case 0xaa:

        s->modifiers &= ~1;

        break;

    case 0x36:        /* Right Shift */

        s->modifiers |= 2;

        break;

    case 0xb6:

        s->modifiers &= ~2;

        break;

    case 0x1d:        /* Control */

        s->modifiers |= 4;

        break;

    case 0x9d:

        s->modifiers &= ~4;

        break;

    case 0x38:        /* Alt */

        s->modifiers |= 8;

        break;

    case 0xb8:

        s->modifiers &= ~8;

        break;

    }

    code = s->pre_map[mapcode = ((s->modifiers & 3) ?

            (keycode | SHIFT) :

            (keycode & ~SHIFT))];

    if (code != mapcode) {

#if 0

        if ((code & SHIFT) && !(s->modifiers & 1))

            QUEUE_KEY(0x2a | (keycode & 0x80));

        if ((code & CTRL ) && !(s->modifiers & 4))

            QUEUE_KEY(0x1d | (keycode & 0x80));

        if ((code & FN   ) && !(s->modifiers & 8))

            QUEUE_KEY(0x38 | (keycode & 0x80));

        if ((code & FN   ) && (s->modifiers & 1))

            QUEUE_KEY(0x2a | (~keycode & 0x80));

        if ((code & FN   ) && (s->modifiers & 2))

            QUEUE_KEY(0x36 | (~keycode & 0x80));

#else

        if (keycode & 0x80) {

            if ((s->imodifiers & 1   ) && !(s->modifiers & 1))

                QUEUE_KEY(0x2a | 0x80);

            if ((s->imodifiers & 4   ) && !(s->modifiers & 4))

                QUEUE_KEY(0x1d | 0x80);

            if ((s->imodifiers & 8   ) && !(s->modifiers & 8))

                QUEUE_KEY(0x38 | 0x80);

            if ((s->imodifiers & 0x10) && (s->modifiers & 1))

                QUEUE_KEY(0x2a);

            if ((s->imodifiers & 0x20) && (s->modifiers & 2))

                QUEUE_KEY(0x36);

            s->imodifiers = 0;

        } else {

            if ((code & SHIFT) && !((s->modifiers | s->imodifiers) & 1)) {

                QUEUE_KEY(0x2a);

                s->imodifiers |= 1;

            }

            if ((code & CTRL ) && !((s->modifiers | s->imodifiers) & 4)) {

                QUEUE_KEY(0x1d);

                s->imodifiers |= 4;

            }

            if ((code & FN   ) && !((s->modifiers | s->imodifiers) & 8)) {

                QUEUE_KEY(0x38);

                s->imodifiers |= 8;

            }

            if ((code & FN   ) && (s->modifiers & 1) &&

                            !(s->imodifiers & 0x10)) {

                QUEUE_KEY(0x2a | 0x80);

                s->imodifiers |= 0x10;

            }

            if ((code & FN   ) && (s->modifiers & 2) &&

                            !(s->imodifiers & 0x20)) {

                QUEUE_KEY(0x36 | 0x80);

                s->imodifiers |= 0x20;

            }

        }

#endif

    }

    QUEUE_KEY((code & 0x7f) | (keycode & 0x80));

}

static void spitz_keyboard_tick(void *opaque)

{

    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;

    if (s->fifolen) {

        spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]);

        s->fifolen --;

        if (s->fifopos >= 16)

            s->fifopos = 0;

    }

    qemu_mod_timer(s->kbdtimer, qemu_get_clock_ns(vm_clock) +

                   get_ticks_per_sec() / 32);

}

static void spitz_keyboard_pre_map(SpitzKeyboardState *s)

{

    int i;

    for (i = 0; i < 0x100; i ++)

        s->pre_map[i] = i;

    s->pre_map[0x02 | SHIFT        ] = 0x02 | SHIFT;        /* exclam */

    s->pre_map[0x28 | SHIFT        ] = 0x03 | SHIFT;        /* quotedbl */

    s->pre_map[0x04 | SHIFT        ] = 0x04 | SHIFT;        /* numbersign */

    s->pre_map[0x05 | SHIFT        ] = 0x05 | SHIFT;        /* dollar */

    s->pre_map[0x06 | SHIFT        ] = 0x06 | SHIFT;        /* percent */

    s->pre_map[0x08 | SHIFT        ] = 0x07 | SHIFT;        /* ampersand */

    s->pre_map[0x28                ] = 0x08 | SHIFT;        /* apostrophe */

    s->pre_map[0x0a | SHIFT        ] = 0x09 | SHIFT;        /* parenleft */

    s->pre_map[0x0b | SHIFT        ] = 0x0a | SHIFT;        /* parenright */

    s->pre_map[0x29 | SHIFT        ] = 0x0b | SHIFT;        /* asciitilde */

    s->pre_map[0x03 | SHIFT        ] = 0x0c | SHIFT;        /* at */

    s->pre_map[0xd3                ] = 0x0e | FN;                /* Delete */

    s->pre_map[0x3a                ] = 0x0f | FN;                /* Caps_Lock */

    s->pre_map[0x07 | SHIFT        ] = 0x11 | FN;                /* asciicircum */

    s->pre_map[0x0d                ] = 0x12 | FN;                /* equal */

    s->pre_map[0x0d | SHIFT        ] = 0x13 | FN;                /* plus */

    s->pre_map[0x1a                ] = 0x14 | FN;                /* bracketleft */

    s->pre_map[0x1b                ] = 0x15 | FN;                /* bracketright */

    s->pre_map[0x1a | SHIFT        ] = 0x16 | FN;                /* braceleft */

    s->pre_map[0x1b | SHIFT        ] = 0x17 | FN;                /* braceright */

    s->pre_map[0x27                ] = 0x22 | FN;                /* semicolon */

    s->pre_map[0x27 | SHIFT        ] = 0x23 | FN;                /* colon */

    s->pre_map[0x09 | SHIFT        ] = 0x24 | FN;                /* asterisk */

    s->pre_map[0x2b                ] = 0x25 | FN;                /* backslash */

    s->pre_map[0x2b | SHIFT        ] = 0x26 | FN;                /* bar */

    s->pre_map[0x0c | SHIFT        ] = 0x30 | FN;                /* underscore */

    s->pre_map[0x33 | SHIFT        ] = 0x33 | FN;                /* less */

    s->pre_map[0x35                ] = 0x33 | SHIFT;        /* slash */

    s->pre_map[0x34 | SHIFT        ] = 0x34 | FN;                /* greater */

    s->pre_map[0x35 | SHIFT        ] = 0x34 | SHIFT;        /* question */

    s->pre_map[0x49                ] = 0x48 | FN;                /* Page_Up */

    s->pre_map[0x51                ] = 0x50 | FN;                /* Page_Down */

    s->modifiers = 0;

    s->imodifiers = 0;

    s->fifopos = 0;

    s->fifolen = 0;

}

#undef SHIFT

#undef CTRL

#undef FN

static int spitz_keyboard_post_load(void *opaque, int version_id)

{

    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;

    /* Release all pressed keys */

    memset(s->keyrow, 0, sizeof(s->keyrow));

    spitz_keyboard_sense_update(s);

    s->modifiers = 0;

    s->imodifiers = 0;

    s->fifopos = 0;

    s->fifolen = 0;

    return 0;

}

static void spitz_keyboard_register(PXA2xxState *cpu)

{

    int i;

    DeviceState *dev;

    SpitzKeyboardState *s;

    dev = sysbus_create_simple("spitz-keyboard", -1, NULL);

    s = FROM_SYSBUS(SpitzKeyboardState, sysbus_from_qdev(dev));

    for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++)

        qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i]));

    for (i = 0; i < 5; i ++)

        s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]);

    if (!graphic_rotate)

        s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]);

    for (i = 0; i < 5; i++)

        qemu_set_irq(s->gpiomap[i], 0);

    for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)

        qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i],

                qdev_get_gpio_in(dev, i));

    qemu_mod_timer(s->kbdtimer, qemu_get_clock_ns(vm_clock));

    qemu_add_kbd_event_handler(spitz_keyboard_handler, s);

}

static int spitz_keyboard_init(SysBusDevice *dev)

{

    SpitzKeyboardState *s;

    int i, j;

    s = FROM_SYSBUS(SpitzKeyboardState, dev);

    for (i = 0; i < 0x80; i ++)

        s->keymap[i] = -1;

    for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++)

        for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++)

            if (spitz_keymap[i][j] != -1)

                s->keymap[spitz_keymap[i][j]] = (i << 4) | j;

    spitz_keyboard_pre_map(s);

    s->kbdtimer = qemu_new_timer_ns(vm_clock, spitz_keyboard_tick, s);

    qdev_init_gpio_in(&dev->qdev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM);

    qdev_init_gpio_out(&dev->qdev, s->sense, SPITZ_KEY_SENSE_NUM);

    return 0;

}

/* LCD backlight controller */

#define LCDTG_RESCTL        0x00

#define LCDTG_PHACTRL        0x01

#define LCDTG_DUTYCTRL        0x02

#define LCDTG_POWERREG0        0x03

#define LCDTG_POWERREG1        0x04

#define LCDTG_GPOR3        0x05

#define LCDTG_PICTRL        0x06

#define LCDTG_POLCTRL        0x07

typedef struct {

    SSISlave ssidev;

    uint32_t bl_intensity;

    uint32_t bl_power;

} SpitzLCDTG;

static void spitz_bl_update(SpitzLCDTG *s)

{

    if (s->bl_power && s->bl_intensity)

        zaurus_printf("LCD Backlight now at %i/63\n", s->bl_intensity);

    else

        zaurus_printf("LCD Backlight now off\n");

}

/* FIXME: Implement GPIO properly and remove this hack.  */

static SpitzLCDTG *spitz_lcdtg;

static inline void spitz_bl_bit5(void *opaque, int line, int level)

{

    SpitzLCDTG *s = spitz_lcdtg;

    int prev = s->bl_intensity;

    if (level)

        s->bl_intensity &= ~0x20;

    else

        s->bl_intensity |= 0x20;

    if (s->bl_power && prev != s->bl_intensity)

        spitz_bl_update(s);

}

static inline void spitz_bl_power(void *opaque, int line, int level)

{

    SpitzLCDTG *s = spitz_lcdtg;

    s->bl_power = !!level;

    spitz_bl_update(s);

}

static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value)

{

    SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev);

    int addr;

    addr = value >> 5;

    value &= 0x1f;

    switch (addr) {

    case LCDTG_RESCTL:

        if (value)

            zaurus_printf("LCD in QVGA mode\n");

        else

            zaurus_printf("LCD in VGA mode\n");

        break;

    case LCDTG_DUTYCTRL:

        s->bl_intensity &= ~0x1f;

        s->bl_intensity |= value;

        if (s->bl_power)

            spitz_bl_update(s);

        break;

    case LCDTG_POWERREG0:

        /* Set common voltage to M62332FP */

        break;

    }

    return 0;

}

static int spitz_lcdtg_init(SSISlave *dev)

{

    SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev);

    spitz_lcdtg = s;

    s->bl_power = 0;

    s->bl_intensity = 0x20;

    return 0;

}

/* SSP devices */

#define CORGI_SSP_PORT                2

#define SPITZ_GPIO_LCDCON_CS        53

#define SPITZ_GPIO_ADS7846_CS        14

#define SPITZ_GPIO_MAX1111_CS        20

#define SPITZ_GPIO_TP_INT        11

static DeviceState *max1111;

/* "Demux" the signal based on current chipselect */

typedef struct {

    SSISlave ssidev;

    SSIBus *bus[3];

    uint32_t enable[3];

} CorgiSSPState;

static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value)

{

    CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev);

    int i;

    for (i = 0; i < 3; i++) {

        if (s->enable[i]) {

            return ssi_transfer(s->bus[i], value);

        }

    }

    return 0;

}

static void corgi_ssp_gpio_cs(void *opaque, int line, int level)

{

    CorgiSSPState *s = (CorgiSSPState *)opaque;

    assert(line >= 0 && line < 3);

    s->enable[line] = !level;

}

#define MAX1111_BATT_VOLT        1

#define MAX1111_BATT_TEMP        2

#define MAX1111_ACIN_VOLT        3

#define SPITZ_BATTERY_TEMP        0xe0        /* About 2.9V */

#define SPITZ_BATTERY_VOLT        0xd0        /* About 4.0V */

#define SPITZ_CHARGEON_ACIN        0x80        /* About 5.0V */

static void spitz_adc_temp_on(void *opaque, int line, int level)

{

    if (!max1111)

        return;

    if (level)

        max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP);

    else

        max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);

}

static int corgi_ssp_init(SSISlave *dev)

{

    CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev);

    qdev_init_gpio_in(&dev->qdev, corgi_ssp_gpio_cs, 3);

    s->bus[0] = ssi_create_bus(&dev->qdev, "ssi0");

    s->bus[1] = ssi_create_bus(&dev->qdev, "ssi1");

    s->bus[2] = ssi_create_bus(&dev->qdev, "ssi2");

    return 0;

}

static void spitz_ssp_attach(PXA2xxState *cpu)

{

    DeviceState *mux;

    DeviceState *dev;

    void *bus;

    mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp");

    bus = qdev_get_child_bus(mux, "ssi0");

    ssi_create_slave(bus, "spitz-lcdtg");

    bus = qdev_get_child_bus(mux, "ssi1");

    dev = ssi_create_slave(bus, "ads7846");

    qdev_connect_gpio_out(dev, 0,

                          qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT));

    bus = qdev_get_child_bus(mux, "ssi2");

    max1111 = ssi_create_slave(bus, "max1111");

    max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT);

    max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);

    max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN);

    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS,

                        qdev_get_gpio_in(mux, 0));

    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS,

                        qdev_get_gpio_in(mux, 1));

    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS,

                        qdev_get_gpio_in(mux, 2));

}

/* CF Microdrive */

static void spitz_microdrive_attach(PXA2xxState *cpu, int slot)

{

    PCMCIACardState *md;

    DriveInfo *dinfo;

    dinfo = drive_get(IF_IDE, 0, 0);

    if (!dinfo || dinfo->media_cd)

        return;

    md = dscm1xxxx_init(dinfo);

    pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md);

}

/* Wm8750 and Max7310 on I2C */

#define AKITA_MAX_ADDR        0x18

#define SPITZ_WM_ADDRL        0x1b

#define SPITZ_WM_ADDRH        0x1a

#define SPITZ_GPIO_WM        5

static void spitz_wm8750_addr(void *opaque, int line, int level)

{

    I2CSlave *wm = (I2CSlave *) opaque;

    if (level)

        i2c_set_slave_address(wm, SPITZ_WM_ADDRH);

    else

        i2c_set_slave_address(wm, SPITZ_WM_ADDRL);

}

static void spitz_i2c_setup(PXA2xxState *cpu)

{

    /* Attach the CPU on one end of our I2C bus.  */

    i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);

    DeviceState *wm;

    /* Attach a WM8750 to the bus */

    wm = i2c_create_slave(bus, "wm8750", 0);

    spitz_wm8750_addr(wm, 0, 0);

    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM,

                    qemu_allocate_irqs(spitz_wm8750_addr, wm, 1)[0]);

    /* .. and to the sound interface.  */

    cpu->i2s->opaque = wm;

    cpu->i2s->codec_out = wm8750_dac_dat;

    cpu->i2s->codec_in = wm8750_adc_dat;

    wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s);

}

static void spitz_akita_i2c_setup(PXA2xxState *cpu)

{

    /* Attach a Max7310 to Akita I2C bus.  */

    i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",

                     AKITA_MAX_ADDR);

}

/* Other peripherals */

static void spitz_out_switch(void *opaque, int line, int level)

{

    switch (line) {

    case 0:

        zaurus_printf("Charging %s.\n", level ? "off" : "on");

        break;

    case 1:

        zaurus_printf("Discharging %s.\n", level ? "on" : "off");

        break;

    case 2:

        zaurus_printf("Green LED %s.\n", level ? "on" : "off");

        break;

    case 3:

        zaurus_printf("Orange LED %s.\n", level ? "on" : "off");

        break;

    case 4:

        spitz_bl_bit5(opaque, line, level);

        break;

    case 5:

        spitz_bl_power(opaque, line, level);

        break;

    case 6:

        spitz_adc_temp_on(opaque, line, level);

        break;

    }

}

#define SPITZ_SCP_LED_GREEN                1

#define SPITZ_SCP_JK_B                        2

#define SPITZ_SCP_CHRG_ON                3

#define SPITZ_SCP_MUTE_L                4

#define SPITZ_SCP_MUTE_R                5

#define SPITZ_SCP_CF_POWER                6

#define SPITZ_SCP_LED_ORANGE                7

#define SPITZ_SCP_JK_A                        8

#define SPITZ_SCP_ADC_TEMP_ON                9

#define SPITZ_SCP2_IR_ON                1

#define SPITZ_SCP2_AKIN_PULLUP                2

#define SPITZ_SCP2_BACKLIGHT_CONT        7

#define SPITZ_SCP2_BACKLIGHT_ON                8

#define SPITZ_SCP2_MIC_BIAS                9

static void spitz_scoop_gpio_setup(PXA2xxState *cpu,

                DeviceState *scp0, DeviceState *scp1)

{

    qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8);

    qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]);

    qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]);

    qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]);

    qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]);

    if (scp1) {

        qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]);

        qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]);

    }

    qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]);

}

#define SPITZ_GPIO_HSYNC                22

#define SPITZ_GPIO_SD_DETECT                9

#define SPITZ_GPIO_SD_WP                81

#define SPITZ_GPIO_ON_RESET                89

#define SPITZ_GPIO_BAT_COVER                90

#define SPITZ_GPIO_CF1_IRQ                105

#define SPITZ_GPIO_CF1_CD                94

#define SPITZ_GPIO_CF2_IRQ                106

#define SPITZ_GPIO_CF2_CD                93

static int spitz_hsync;

static void spitz_lcd_hsync_handler(void *opaque, int line, int level)

{

    PXA2xxState *cpu = (PXA2xxState *) opaque;

    qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync);

    spitz_hsync ^= 1;

}

static void spitz_gpio_setup(PXA2xxState *cpu, int slots)

{

    qemu_irq lcd_hsync;

    /*

     * Bad hack: We toggle the LCD hsync GPIO on every GPIO status

     * read to satisfy broken guests that poll-wait for hsync.

     * Simulating a real hsync event would be less practical and

     * wouldn't guarantee that a guest ever exits the loop.

     */

    spitz_hsync = 0;

    lcd_hsync = qemu_allocate_irqs(spitz_lcd_hsync_handler, cpu, 1)[0];

    pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync);

    pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync);