Archipelago » qemu

/*

 * QEMU SMBus EEPROM device

 *

 * Copyright (c) 2007 Arastra, Inc.

 *

 * Permission is hereby granted, free of charge, to any person obtaining a copy

 * of this software and associated documentation files (the "Software"), to deal

 * in the Software without restriction, including without limitation the rights

 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

 * copies of the Software, and to permit persons to whom the Software is

 * furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be included in

 * all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

 * THE SOFTWARE.

 */

#include "hw.h"

#include "i2c.h"

#include "smbus.h"

//#define DEBUG

typedef struct SMBusEEPROMDevice {

    SMBusDevice dev;

    uint8_t *data;

    uint8_t offset;

} SMBusEEPROMDevice;

static void eeprom_quick_cmd(SMBusDevice *dev, uint8_t read)

{

#ifdef DEBUG

    printf("eeprom_quick_cmd: addr=0x%02x read=%d\n", dev->i2c.address, read);

#endif

}

static void eeprom_send_byte(SMBusDevice *dev, uint8_t val)

{

    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;

#ifdef DEBUG

    printf("eeprom_send_byte: addr=0x%02x val=0x%02x\n",

           dev->i2c.address, val);

#endif

    eeprom->offset = val;

}

static uint8_t eeprom_receive_byte(SMBusDevice *dev)

{

    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;

    uint8_t val = eeprom->data[eeprom->offset++];

#ifdef DEBUG

    printf("eeprom_receive_byte: addr=0x%02x val=0x%02x\n",

           dev->i2c.address, val);

#endif

    return val;

}

static void eeprom_write_data(SMBusDevice *dev, uint8_t cmd, uint8_t *buf, int len)

{

    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;

    int n;

#ifdef DEBUG

    printf("eeprom_write_byte: addr=0x%02x cmd=0x%02x val=0x%02x\n",

           dev->i2c.address, cmd, buf[0]);

#endif

    /* An page write operation is not a valid SMBus command.

       It is a block write without a length byte.  Fortunately we

       get the full block anyway.  */

    /* TODO: Should this set the current location?  */

    if (cmd + len > 256)

        n = 256 - cmd;

    else

        n = len;

    memcpy(eeprom->data + cmd, buf, n);

    len -= n;

    if (len)

        memcpy(eeprom->data, buf + n, len);

}

static uint8_t eeprom_read_data(SMBusDevice *dev, uint8_t cmd, int n)

{

    SMBusEEPROMDevice *eeprom = (SMBusEEPROMDevice *) dev;

    /* If this is the first byte then set the current position.  */

    if (n == 0)

        eeprom->offset = cmd;

    /* As with writes, we implement block reads without the

       SMBus length byte.  */

    return eeprom_receive_byte(dev);

}

void smbus_eeprom_device_init(i2c_bus *bus, uint8_t addr, uint8_t *buf)

{

    SMBusEEPROMDevice *eeprom;

    eeprom = (SMBusEEPROMDevice *)smbus_device_init(bus, addr,

        sizeof(SMBusEEPROMDevice));

    eeprom->dev.quick_cmd = eeprom_quick_cmd;

    eeprom->dev.send_byte = eeprom_send_byte;

    eeprom->dev.receive_byte = eeprom_receive_byte;

    eeprom->dev.write_data = eeprom_write_data;

    eeprom->dev.read_data = eeprom_read_data;

    eeprom->data = buf;

    eeprom->offset = 0;

}