root / qemu-doc.texi @ d79284e0
History | View | Annotate | Download (35.8 kB)
1 |
\input texinfo @c -*- texinfo -*- |
---|---|
2 |
|
3 |
@iftex |
4 |
@settitle QEMU CPU Emulator User Documentation |
5 |
@titlepage |
6 |
@sp 7 |
7 |
@center @titlefont{QEMU CPU Emulator User Documentation} |
8 |
@sp 3 |
9 |
@end titlepage |
10 |
@end iftex |
11 |
|
12 |
@chapter Introduction |
13 |
|
14 |
@section Features |
15 |
|
16 |
QEMU is a FAST! processor emulator using dynamic translation to |
17 |
achieve good emulation speed. |
18 |
|
19 |
QEMU has two operating modes: |
20 |
|
21 |
@itemize @minus |
22 |
|
23 |
@item |
24 |
Full system emulation. In this mode, QEMU emulates a full system (for |
25 |
example a PC), including a processor and various peripherials. It can |
26 |
be used to launch different Operating Systems without rebooting the |
27 |
PC or to debug system code. |
28 |
|
29 |
@item |
30 |
User mode emulation (Linux host only). In this mode, QEMU can launch |
31 |
Linux processes compiled for one CPU on another CPU. It can be used to |
32 |
launch the Wine Windows API emulator (@url{http://www.winehq.org}) or |
33 |
to ease cross-compilation and cross-debugging. |
34 |
|
35 |
@end itemize |
36 |
|
37 |
As QEMU requires no host kernel driver to run, it is very safe and |
38 |
easy to use. |
39 |
|
40 |
For system emulation, the following hardware targets are supported: |
41 |
@itemize |
42 |
@item PC (x86 processor) |
43 |
@item PREP (PowerPC processor) |
44 |
@item PowerMac (PowerPC processor, in progress) |
45 |
@end itemize |
46 |
|
47 |
For user emulation, x86, PowerPC, ARM, and SPARC CPUs are supported. |
48 |
|
49 |
@chapter Installation |
50 |
|
51 |
If you want to compile QEMU yourself, see @ref{compilation}. |
52 |
|
53 |
@section Linux |
54 |
|
55 |
Download the binary distribution (@file{qemu-XXX-i386.tar.gz}) in |
56 |
@file{/tmp} and untar it as root from @file{/}: |
57 |
|
58 |
@example |
59 |
su |
60 |
cd / |
61 |
tar zxvf /tmp/qemu-XXX-i386.tar.gz |
62 |
@end example |
63 |
|
64 |
@section Windows |
65 |
|
66 |
Download the experimental binary installer at |
67 |
@url{http://www.freeoszoo.org/download.php}. |
68 |
|
69 |
@section Mac OS X |
70 |
|
71 |
Download the experimental binary installer at |
72 |
@url{http://www.freeoszoo.org/download.php}. |
73 |
|
74 |
@chapter QEMU PC System emulator invocation |
75 |
|
76 |
@section Introduction |
77 |
|
78 |
@c man begin DESCRIPTION |
79 |
|
80 |
The QEMU System emulator simulates a complete PC. |
81 |
|
82 |
In order to meet specific user needs, two versions of QEMU are |
83 |
available: |
84 |
|
85 |
@enumerate |
86 |
|
87 |
@item |
88 |
@code{qemu-fast} uses the host Memory Management Unit (MMU) to |
89 |
simulate the x86 MMU. It is @emph{fast} but has limitations because |
90 |
the whole 4 GB address space cannot be used and some memory mapped |
91 |
peripherials cannot be emulated accurately yet. Therefore, a specific |
92 |
guest Linux kernel can be used (@xref{linux_compile}) as guest |
93 |
OS. |
94 |
|
95 |
Moreover there is no separation between the host and target address |
96 |
spaces, so it offers no security (the target OS can modify the |
97 |
@code{qemu-fast} code by writing at the right addresses). |
98 |
|
99 |
@item |
100 |
@code{qemu} uses a software MMU. It is about @emph{two times slower} |
101 |
but gives a more accurate emulation and a complete separation between |
102 |
the host and target address spaces. |
103 |
|
104 |
@end enumerate |
105 |
|
106 |
QEMU emulates the following PC peripherials: |
107 |
|
108 |
@itemize @minus |
109 |
@item |
110 |
i440FX host PCI bridge and PIIX3 PCI to ISA bridge |
111 |
@item |
112 |
Cirrus CLGD 5446 PCI VGA card or dummy VGA card with Bochs VESA |
113 |
extensions (hardware level, including all non standard modes). |
114 |
@item |
115 |
PS/2 mouse and keyboard |
116 |
@item |
117 |
2 PCI IDE interfaces with hard disk and CD-ROM support |
118 |
@item |
119 |
Floppy disk |
120 |
@item |
121 |
NE2000 PCI network adapters |
122 |
@item |
123 |
Serial ports |
124 |
@item |
125 |
Soundblaster 16 card |
126 |
@end itemize |
127 |
|
128 |
QEMU uses the PC BIOS from the Bochs project and the Plex86/Bochs LGPL |
129 |
VGA BIOS. |
130 |
|
131 |
@c man end |
132 |
|
133 |
@section Quick Start |
134 |
|
135 |
Download and uncompress the linux image (@file{linux.img}) and type: |
136 |
|
137 |
@example |
138 |
qemu linux.img |
139 |
@end example |
140 |
|
141 |
Linux should boot and give you a prompt. |
142 |
|
143 |
@section Invocation |
144 |
|
145 |
@example |
146 |
@c man begin SYNOPSIS |
147 |
usage: qemu [options] [disk_image] |
148 |
@c man end |
149 |
@end example |
150 |
|
151 |
@c man begin OPTIONS |
152 |
@var{disk_image} is a raw hard disk image for IDE hard disk 0. |
153 |
|
154 |
General options: |
155 |
@table @option |
156 |
@item -fda file |
157 |
@item -fdb file |
158 |
Use @var{file} as floppy disk 0/1 image (@xref{disk_images}). You can |
159 |
use the host floppy by using @file{/dev/fd0} as filename. |
160 |
|
161 |
@item -hda file |
162 |
@item -hdb file |
163 |
@item -hdc file |
164 |
@item -hdd file |
165 |
Use @var{file} as hard disk 0, 1, 2 or 3 image (@xref{disk_images}). |
166 |
|
167 |
@item -cdrom file |
168 |
Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and and |
169 |
@option{-cdrom} at the same time). You can use the host CD-ROM by |
170 |
using @file{/dev/cdrom} as filename. |
171 |
|
172 |
@item -boot [a|c|d] |
173 |
Boot on floppy (a), hard disk (c) or CD-ROM (d). Hard disk boot is |
174 |
the default. |
175 |
|
176 |
@item -snapshot |
177 |
Write to temporary files instead of disk image files. In this case, |
178 |
the raw disk image you use is not written back. You can however force |
179 |
the write back by pressing @key{C-a s} (@xref{disk_images}). |
180 |
|
181 |
@item -m megs |
182 |
Set virtual RAM size to @var{megs} megabytes. Default is 128 MB. |
183 |
|
184 |
@item -nographic |
185 |
|
186 |
Normally, QEMU uses SDL to display the VGA output. With this option, |
187 |
you can totally disable graphical output so that QEMU is a simple |
188 |
command line application. The emulated serial port is redirected on |
189 |
the console. Therefore, you can still use QEMU to debug a Linux kernel |
190 |
with a serial console. |
191 |
|
192 |
@item -k language |
193 |
|
194 |
Use keyboard layout @var{language} (for example @code{fr} for |
195 |
French). This option is only needed where it is not easy to get raw PC |
196 |
keycodes (e.g. on Macs or with some X11 servers). You don't need to |
197 |
use it on PC/Linux or PC/Windows hosts. |
198 |
|
199 |
The available layouts are: |
200 |
@example |
201 |
ar de-ch es fo fr-ca hu ja mk no pt-br sv |
202 |
da en-gb et fr fr-ch is lt nl pl ru th |
203 |
de en-us fi fr-be hr it lv nl-be pt sl tr |
204 |
@end example |
205 |
|
206 |
The default is @code{en-us}. |
207 |
|
208 |
@item -enable-audio |
209 |
|
210 |
The SB16 emulation is disabled by default as it may give problems with |
211 |
Windows. You can enable it manually with this option. |
212 |
|
213 |
@item -localtime |
214 |
Set the real time clock to local time (the default is to UTC |
215 |
time). This option is needed to have correct date in MS-DOS or |
216 |
Windows. |
217 |
|
218 |
@item -full-screen |
219 |
Start in full screen. |
220 |
|
221 |
@item -pidfile file |
222 |
Store the QEMU process PID in @var{file}. It is useful if you launch QEMU |
223 |
from a script. |
224 |
|
225 |
@end table |
226 |
|
227 |
Network options: |
228 |
|
229 |
@table @option |
230 |
|
231 |
@item -n script |
232 |
Set TUN/TAP network init script [default=/etc/qemu-ifup]. This script |
233 |
is launched to configure the host network interface (usually tun0) |
234 |
corresponding to the virtual NE2000 card. |
235 |
|
236 |
@item -macaddr addr |
237 |
|
238 |
Set the mac address of the first interface (the format is |
239 |
aa:bb:cc:dd:ee:ff in hexa). The mac address is incremented for each |
240 |
new network interface. |
241 |
|
242 |
@item -tun-fd fd |
243 |
Assumes @var{fd} talks to a tap/tun host network interface and use |
244 |
it. Read @url{http://bellard.org/qemu/tetrinet.html} to have an |
245 |
example of its use. |
246 |
|
247 |
@item -user-net |
248 |
Use the user mode network stack. This is the default if no tun/tap |
249 |
network init script is found. |
250 |
|
251 |
@item -tftp prefix |
252 |
When using the user mode network stack, activate a built-in TFTP |
253 |
server. All filenames beginning with @var{prefix} can be downloaded |
254 |
from the host to the guest using a TFTP client. The TFTP client on the |
255 |
guest must be configured in binary mode (use the command @code{bin} of |
256 |
the Unix TFTP client). The host IP address on the guest is as usual |
257 |
10.0.2.2. |
258 |
|
259 |
@item -smb dir |
260 |
When using the user mode network stack, activate a built-in SMB |
261 |
server so that Windows OSes can access to the host files in @file{dir} |
262 |
transparently. |
263 |
|
264 |
In the guest Windows OS, the line: |
265 |
@example |
266 |
10.0.2.4 smbserver |
267 |
@end example |
268 |
must be added in the file @file{C:\WINDOWS\LMHOSTS} (for windows 9x/Me) |
269 |
or @file{C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS} (Windows NT/2000). |
270 |
|
271 |
Then @file{dir} can be accessed in @file{\\smbserver\qemu}. |
272 |
|
273 |
Note that a SAMBA server must be installed on the host OS in |
274 |
@file{/usr/sbin/smbd}. QEMU was tested succesfully with smbd version |
275 |
2.2.7a from the Red Hat 9. |
276 |
|
277 |
@item -redir [tcp|udp]:host-port:[guest-host]:guest-port |
278 |
|
279 |
When using the user mode network stack, redirect incoming TCP or UDP |
280 |
connections to the host port @var{host-port} to the guest |
281 |
@var{guest-host} on guest port @var{guest-port}. If @var{guest-host} |
282 |
is not specified, its value is 10.0.2.15 (default address given by the |
283 |
built-in DHCP server). |
284 |
|
285 |
For example, to redirect host X11 connection from screen 1 to guest |
286 |
screen 0, use the following: |
287 |
|
288 |
@example |
289 |
# on the host |
290 |
qemu -redir tcp:6001::6000 [...] |
291 |
# this host xterm should open in the guest X11 server |
292 |
xterm -display :1 |
293 |
@end example |
294 |
|
295 |
To redirect telnet connections from host port 5555 to telnet port on |
296 |
the guest, use the following: |
297 |
|
298 |
@example |
299 |
# on the host |
300 |
qemu -redir tcp:5555::23 [...] |
301 |
telnet localhost 5555 |
302 |
@end example |
303 |
|
304 |
Then when you use on the host @code{telnet localhost 5555}, you |
305 |
connect to the guest telnet server. |
306 |
|
307 |
@item -dummy-net |
308 |
Use the dummy network stack: no packet will be received by the network |
309 |
cards. |
310 |
|
311 |
@end table |
312 |
|
313 |
Linux boot specific. When using this options, you can use a given |
314 |
Linux kernel without installing it in the disk image. It can be useful |
315 |
for easier testing of various kernels. |
316 |
|
317 |
@table @option |
318 |
|
319 |
@item -kernel bzImage |
320 |
Use @var{bzImage} as kernel image. |
321 |
|
322 |
@item -append cmdline |
323 |
Use @var{cmdline} as kernel command line |
324 |
|
325 |
@item -initrd file |
326 |
Use @var{file} as initial ram disk. |
327 |
|
328 |
@end table |
329 |
|
330 |
Debug/Expert options: |
331 |
@table @option |
332 |
|
333 |
@item -serial dev |
334 |
Redirect the virtual serial port to host device @var{dev}. Available |
335 |
devices are: |
336 |
@table @code |
337 |
@item vc |
338 |
Virtual console |
339 |
@item pty |
340 |
[Linux only] Pseudo TTY (a new PTY is automatically allocated) |
341 |
@item null |
342 |
void device |
343 |
@item stdio |
344 |
[Unix only] standard input/output |
345 |
@end table |
346 |
The default device is @code{vc} in graphical mode and @code{stdio} in |
347 |
non graphical mode. |
348 |
|
349 |
This option can be used several times to simulate up to 4 serials |
350 |
ports. |
351 |
|
352 |
@item -monitor dev |
353 |
Redirect the monitor to host device @var{dev} (same devices as the |
354 |
serial port). |
355 |
The default device is @code{vc} in graphical mode and @code{stdio} in |
356 |
non graphical mode. |
357 |
|
358 |
@item -s |
359 |
Wait gdb connection to port 1234 (@xref{gdb_usage}). |
360 |
@item -p port |
361 |
Change gdb connection port. |
362 |
@item -S |
363 |
Do not start CPU at startup (you must type 'c' in the monitor). |
364 |
@item -d |
365 |
Output log in /tmp/qemu.log |
366 |
@item -hdachs c,h,s,[,t] |
367 |
Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <= |
368 |
@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS |
369 |
translation mode (@var{t}=none, lba or auto). Usually QEMU can guess |
370 |
all thoses parameters. This option is useful for old MS-DOS disk |
371 |
images. |
372 |
@item -isa |
373 |
Simulate an ISA-only system (default is PCI system). |
374 |
@item -std-vga |
375 |
Simulate a standard VGA card with Bochs VBE extensions (default is |
376 |
Cirrus Logic GD5446 PCI VGA) |
377 |
@item -loadvm file |
378 |
Start right away with a saved state (@code{loadvm} in monitor) |
379 |
@end table |
380 |
|
381 |
@c man end |
382 |
|
383 |
@section Keys |
384 |
|
385 |
@c man begin OPTIONS |
386 |
|
387 |
During the graphical emulation, you can use the following keys: |
388 |
@table @key |
389 |
@item Ctrl-Alt-f |
390 |
Toggle full screen |
391 |
|
392 |
@item Ctrl-Alt-n |
393 |
Switch to virtual console 'n'. Standard console mappings are: |
394 |
@table @emph |
395 |
@item 1 |
396 |
Target system display |
397 |
@item 2 |
398 |
Monitor |
399 |
@item 3 |
400 |
Serial port |
401 |
@end table |
402 |
|
403 |
@item Ctrl-Alt |
404 |
Toggle mouse and keyboard grab. |
405 |
@end table |
406 |
|
407 |
In the virtual consoles, you can use @key{Ctrl-Up}, @key{Ctrl-Down}, |
408 |
@key{Ctrl-PageUp} and @key{Ctrl-PageDown} to move in the back log. |
409 |
|
410 |
During emulation, if you are using the @option{-nographic} option, use |
411 |
@key{Ctrl-a h} to get terminal commands: |
412 |
|
413 |
@table @key |
414 |
@item Ctrl-a h |
415 |
Print this help |
416 |
@item Ctrl-a x |
417 |
Exit emulatior |
418 |
@item Ctrl-a s |
419 |
Save disk data back to file (if -snapshot) |
420 |
@item Ctrl-a b |
421 |
Send break (magic sysrq in Linux) |
422 |
@item Ctrl-a c |
423 |
Switch between console and monitor |
424 |
@item Ctrl-a Ctrl-a |
425 |
Send Ctrl-a |
426 |
@end table |
427 |
@c man end |
428 |
|
429 |
@ignore |
430 |
|
431 |
@setfilename qemu |
432 |
@settitle QEMU System Emulator |
433 |
|
434 |
@c man begin SEEALSO |
435 |
The HTML documentation of QEMU for more precise information and Linux |
436 |
user mode emulator invocation. |
437 |
@c man end |
438 |
|
439 |
@c man begin AUTHOR |
440 |
Fabrice Bellard |
441 |
@c man end |
442 |
|
443 |
@end ignore |
444 |
|
445 |
@end ignore |
446 |
|
447 |
|
448 |
@section QEMU Monitor |
449 |
|
450 |
The QEMU monitor is used to give complex commands to the QEMU |
451 |
emulator. You can use it to: |
452 |
|
453 |
@itemize @minus |
454 |
|
455 |
@item |
456 |
Remove or insert removable medias images |
457 |
(such as CD-ROM or floppies) |
458 |
|
459 |
@item |
460 |
Freeze/unfreeze the Virtual Machine (VM) and save or restore its state |
461 |
from a disk file. |
462 |
|
463 |
@item Inspect the VM state without an external debugger. |
464 |
|
465 |
@end itemize |
466 |
|
467 |
@subsection Commands |
468 |
|
469 |
The following commands are available: |
470 |
|
471 |
@table @option |
472 |
|
473 |
@item help or ? [cmd] |
474 |
Show the help for all commands or just for command @var{cmd}. |
475 |
|
476 |
@item commit |
477 |
Commit changes to the disk images (if -snapshot is used) |
478 |
|
479 |
@item info subcommand |
480 |
show various information about the system state |
481 |
|
482 |
@table @option |
483 |
@item info network |
484 |
show the network state |
485 |
@item info block |
486 |
show the block devices |
487 |
@item info registers |
488 |
show the cpu registers |
489 |
@item info history |
490 |
show the command line history |
491 |
@end table |
492 |
|
493 |
@item q or quit |
494 |
Quit the emulator. |
495 |
|
496 |
@item eject [-f] device |
497 |
Eject a removable media (use -f to force it). |
498 |
|
499 |
@item change device filename |
500 |
Change a removable media. |
501 |
|
502 |
@item screendump filename |
503 |
Save screen into PPM image @var{filename}. |
504 |
|
505 |
@item log item1[,...] |
506 |
Activate logging of the specified items to @file{/tmp/qemu.log}. |
507 |
|
508 |
@item savevm filename |
509 |
Save the whole virtual machine state to @var{filename}. |
510 |
|
511 |
@item loadvm filename |
512 |
Restore the whole virtual machine state from @var{filename}. |
513 |
|
514 |
@item stop |
515 |
Stop emulation. |
516 |
|
517 |
@item c or cont |
518 |
Resume emulation. |
519 |
|
520 |
@item gdbserver [port] |
521 |
Start gdbserver session (default port=1234) |
522 |
|
523 |
@item x/fmt addr |
524 |
Virtual memory dump starting at @var{addr}. |
525 |
|
526 |
@item xp /fmt addr |
527 |
Physical memory dump starting at @var{addr}. |
528 |
|
529 |
@var{fmt} is a format which tells the command how to format the |
530 |
data. Its syntax is: @option{/@{count@}@{format@}@{size@}} |
531 |
|
532 |
@table @var |
533 |
@item count |
534 |
is the number of items to be dumped. |
535 |
|
536 |
@item format |
537 |
can be x (hexa), d (signed decimal), u (unsigned decimal), o (octal), |
538 |
c (char) or i (asm instruction). |
539 |
|
540 |
@item size |
541 |
can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86, |
542 |
@code{h} or @code{w} can be specified with the @code{i} format to |
543 |
respectively select 16 or 32 bit code instruction size. |
544 |
|
545 |
@end table |
546 |
|
547 |
Examples: |
548 |
@itemize |
549 |
@item |
550 |
Dump 10 instructions at the current instruction pointer: |
551 |
@example |
552 |
(qemu) x/10i $eip |
553 |
0x90107063: ret |
554 |
0x90107064: sti |
555 |
0x90107065: lea 0x0(%esi,1),%esi |
556 |
0x90107069: lea 0x0(%edi,1),%edi |
557 |
0x90107070: ret |
558 |
0x90107071: jmp 0x90107080 |
559 |
0x90107073: nop |
560 |
0x90107074: nop |
561 |
0x90107075: nop |
562 |
0x90107076: nop |
563 |
@end example |
564 |
|
565 |
@item |
566 |
Dump 80 16 bit values at the start of the video memory. |
567 |
@example |
568 |
(qemu) xp/80hx 0xb8000 |
569 |
0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42 |
570 |
0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41 |
571 |
0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72 |
572 |
0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73 |
573 |
0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20 |
574 |
0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720 |
575 |
0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
576 |
0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
577 |
0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
578 |
0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
579 |
@end example |
580 |
@end itemize |
581 |
|
582 |
@item p or print/fmt expr |
583 |
|
584 |
Print expression value. Only the @var{format} part of @var{fmt} is |
585 |
used. |
586 |
|
587 |
@item sendkey keys |
588 |
|
589 |
Send @var{keys} to the emulator. Use @code{-} to press several keys |
590 |
simultaneously. Example: |
591 |
@example |
592 |
sendkey ctrl-alt-f1 |
593 |
@end example |
594 |
|
595 |
This command is useful to send keys that your graphical user interface |
596 |
intercepts at low level, such as @code{ctrl-alt-f1} in X Window. |
597 |
|
598 |
@item system_reset |
599 |
|
600 |
Reset the system. |
601 |
|
602 |
@end table |
603 |
|
604 |
@subsection Integer expressions |
605 |
|
606 |
The monitor understands integers expressions for every integer |
607 |
argument. You can use register names to get the value of specifics |
608 |
CPU registers by prefixing them with @emph{$}. |
609 |
|
610 |
@node disk_images |
611 |
@section Disk Images |
612 |
|
613 |
Since version 0.6.1, QEMU supports many disk image formats, including |
614 |
growable disk images (their size increase as non empty sectors are |
615 |
written), compressed and encrypted disk images. |
616 |
|
617 |
@subsection Quick start for disk image creation |
618 |
|
619 |
You can create a disk image with the command: |
620 |
@example |
621 |
qemu-img create myimage.img mysize |
622 |
@end example |
623 |
where @var{myimage.img} is the disk image filename and @var{mysize} is its |
624 |
size in kilobytes. You can add an @code{M} suffix to give the size in |
625 |
megabytes and a @code{G} suffix for gigabytes. |
626 |
|
627 |
@xref{qemu_img_invocation} for more information. |
628 |
|
629 |
@subsection Snapshot mode |
630 |
|
631 |
If you use the option @option{-snapshot}, all disk images are |
632 |
considered as read only. When sectors in written, they are written in |
633 |
a temporary file created in @file{/tmp}. You can however force the |
634 |
write back to the raw disk images by using the @code{commit} monitor |
635 |
command (or @key{C-a s} in the serial console). |
636 |
|
637 |
@node qemu_img_invocation |
638 |
@subsection @code{qemu-img} Invocation |
639 |
|
640 |
@include qemu-img.texi |
641 |
|
642 |
@section Network emulation |
643 |
|
644 |
QEMU simulates up to 6 networks cards (NE2000 boards). Each card can |
645 |
be connected to a specific host network interface. |
646 |
|
647 |
@subsection Using tun/tap network interface |
648 |
|
649 |
This is the standard way to emulate network. QEMU adds a virtual |
650 |
network device on your host (called @code{tun0}), and you can then |
651 |
configure it as if it was a real ethernet card. |
652 |
|
653 |
As an example, you can download the @file{linux-test-xxx.tar.gz} |
654 |
archive and copy the script @file{qemu-ifup} in @file{/etc} and |
655 |
configure properly @code{sudo} so that the command @code{ifconfig} |
656 |
contained in @file{qemu-ifup} can be executed as root. You must verify |
657 |
that your host kernel supports the TUN/TAP network interfaces: the |
658 |
device @file{/dev/net/tun} must be present. |
659 |
|
660 |
See @ref{direct_linux_boot} to have an example of network use with a |
661 |
Linux distribution. |
662 |
|
663 |
@subsection Using the user mode network stack |
664 |
|
665 |
By using the option @option{-user-net} or if you have no tun/tap init |
666 |
script, QEMU uses a completely user mode network stack (you don't need |
667 |
root priviledge to use the virtual network). The virtual network |
668 |
configuration is the following: |
669 |
|
670 |
@example |
671 |
|
672 |
QEMU Virtual Machine <------> Firewall/DHCP server <-----> Internet |
673 |
(10.0.2.x) | (10.0.2.2) |
674 |
| |
675 |
----> DNS server (10.0.2.3) |
676 |
| |
677 |
----> SMB server (10.0.2.4) |
678 |
@end example |
679 |
|
680 |
The QEMU VM behaves as if it was behind a firewall which blocks all |
681 |
incoming connections. You can use a DHCP client to automatically |
682 |
configure the network in the QEMU VM. |
683 |
|
684 |
In order to check that the user mode network is working, you can ping |
685 |
the address 10.0.2.2 and verify that you got an address in the range |
686 |
10.0.2.x from the QEMU virtual DHCP server. |
687 |
|
688 |
Note that @code{ping} is not supported reliably to the internet as it |
689 |
would require root priviledges. It means you can only ping the local |
690 |
router (10.0.2.2). |
691 |
|
692 |
When using the built-in TFTP server, the router is also the TFTP |
693 |
server. |
694 |
|
695 |
When using the @option{-redir} option, TCP or UDP connections can be |
696 |
redirected from the host to the guest. It allows for example to |
697 |
redirect X11, telnet or SSH connections. |
698 |
|
699 |
@node direct_linux_boot |
700 |
@section Direct Linux Boot |
701 |
|
702 |
This section explains how to launch a Linux kernel inside QEMU without |
703 |
having to make a full bootable image. It is very useful for fast Linux |
704 |
kernel testing. The QEMU network configuration is also explained. |
705 |
|
706 |
@enumerate |
707 |
@item |
708 |
Download the archive @file{linux-test-xxx.tar.gz} containing a Linux |
709 |
kernel and a disk image. |
710 |
|
711 |
@item Optional: If you want network support (for example to launch X11 examples), you |
712 |
must copy the script @file{qemu-ifup} in @file{/etc} and configure |
713 |
properly @code{sudo} so that the command @code{ifconfig} contained in |
714 |
@file{qemu-ifup} can be executed as root. You must verify that your host |
715 |
kernel supports the TUN/TAP network interfaces: the device |
716 |
@file{/dev/net/tun} must be present. |
717 |
|
718 |
When network is enabled, there is a virtual network connection between |
719 |
the host kernel and the emulated kernel. The emulated kernel is seen |
720 |
from the host kernel at IP address 172.20.0.2 and the host kernel is |
721 |
seen from the emulated kernel at IP address 172.20.0.1. |
722 |
|
723 |
@item Launch @code{qemu.sh}. You should have the following output: |
724 |
|
725 |
@example |
726 |
> ./qemu.sh |
727 |
Connected to host network interface: tun0 |
728 |
Linux version 2.4.21 (bellard@voyager.localdomain) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #5 Tue Nov 11 18:18:53 CET 2003 |
729 |
BIOS-provided physical RAM map: |
730 |
BIOS-e801: 0000000000000000 - 000000000009f000 (usable) |
731 |
BIOS-e801: 0000000000100000 - 0000000002000000 (usable) |
732 |
32MB LOWMEM available. |
733 |
On node 0 totalpages: 8192 |
734 |
zone(0): 4096 pages. |
735 |
zone(1): 4096 pages. |
736 |
zone(2): 0 pages. |
737 |
Kernel command line: root=/dev/hda sb=0x220,5,1,5 ide2=noprobe ide3=noprobe ide4=noprobe ide5=noprobe console=ttyS0 |
738 |
ide_setup: ide2=noprobe |
739 |
ide_setup: ide3=noprobe |
740 |
ide_setup: ide4=noprobe |
741 |
ide_setup: ide5=noprobe |
742 |
Initializing CPU#0 |
743 |
Detected 2399.621 MHz processor. |
744 |
Console: colour EGA 80x25 |
745 |
Calibrating delay loop... 4744.80 BogoMIPS |
746 |
Memory: 28872k/32768k available (1210k kernel code, 3508k reserved, 266k data, 64k init, 0k highmem) |
747 |
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) |
748 |
Inode cache hash table entries: 2048 (order: 2, 16384 bytes) |
749 |
Mount cache hash table entries: 512 (order: 0, 4096 bytes) |
750 |
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) |
751 |
Page-cache hash table entries: 8192 (order: 3, 32768 bytes) |
752 |
CPU: Intel Pentium Pro stepping 03 |
753 |
Checking 'hlt' instruction... OK. |
754 |
POSIX conformance testing by UNIFIX |
755 |
Linux NET4.0 for Linux 2.4 |
756 |
Based upon Swansea University Computer Society NET3.039 |
757 |
Initializing RT netlink socket |
758 |
apm: BIOS not found. |
759 |
Starting kswapd |
760 |
Journalled Block Device driver loaded |
761 |
Detected PS/2 Mouse Port. |
762 |
pty: 256 Unix98 ptys configured |
763 |
Serial driver version 5.05c (2001-07-08) with no serial options enabled |
764 |
ttyS00 at 0x03f8 (irq = 4) is a 16450 |
765 |
ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com) |
766 |
Last modified Nov 1, 2000 by Paul Gortmaker |
767 |
NE*000 ethercard probe at 0x300: 52 54 00 12 34 56 |
768 |
eth0: NE2000 found at 0x300, using IRQ 9. |
769 |
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize |
770 |
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 |
771 |
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx |
772 |
hda: QEMU HARDDISK, ATA DISK drive |
773 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
774 |
hda: attached ide-disk driver. |
775 |
hda: 20480 sectors (10 MB) w/256KiB Cache, CHS=20/16/63 |
776 |
Partition check: |
777 |
hda: |
778 |
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 |
779 |
NET4: Linux TCP/IP 1.0 for NET4.0 |
780 |
IP Protocols: ICMP, UDP, TCP, IGMP |
781 |
IP: routing cache hash table of 512 buckets, 4Kbytes |
782 |
TCP: Hash tables configured (established 2048 bind 4096) |
783 |
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. |
784 |
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended |
785 |
VFS: Mounted root (ext2 filesystem). |
786 |
Freeing unused kernel memory: 64k freed |
787 |
|
788 |
Linux version 2.4.21 (bellard@voyager.localdomain) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #5 Tue Nov 11 18:18:53 CET 2003 |
789 |
|
790 |
QEMU Linux test distribution (based on Redhat 9) |
791 |
|
792 |
Type 'exit' to halt the system |
793 |
|
794 |
sh-2.05b# |
795 |
@end example |
796 |
|
797 |
@item |
798 |
Then you can play with the kernel inside the virtual serial console. You |
799 |
can launch @code{ls} for example. Type @key{Ctrl-a h} to have an help |
800 |
about the keys you can type inside the virtual serial console. In |
801 |
particular, use @key{Ctrl-a x} to exit QEMU and use @key{Ctrl-a b} as |
802 |
the Magic SysRq key. |
803 |
|
804 |
@item |
805 |
If the network is enabled, launch the script @file{/etc/linuxrc} in the |
806 |
emulator (don't forget the leading dot): |
807 |
@example |
808 |
. /etc/linuxrc |
809 |
@end example |
810 |
|
811 |
Then enable X11 connections on your PC from the emulated Linux: |
812 |
@example |
813 |
xhost +172.20.0.2 |
814 |
@end example |
815 |
|
816 |
You can now launch @file{xterm} or @file{xlogo} and verify that you have |
817 |
a real Virtual Linux system ! |
818 |
|
819 |
@end enumerate |
820 |
|
821 |
NOTES: |
822 |
@enumerate |
823 |
@item |
824 |
A 2.5.74 kernel is also included in the archive. Just |
825 |
replace the bzImage in qemu.sh to try it. |
826 |
|
827 |
@item |
828 |
qemu-fast creates a temporary file in @var{$QEMU_TMPDIR} (@file{/tmp} is the |
829 |
default) containing all the simulated PC memory. If possible, try to use |
830 |
a temporary directory using the tmpfs filesystem to avoid too many |
831 |
unnecessary disk accesses. |
832 |
|
833 |
@item |
834 |
In order to exit cleanly from qemu, you can do a @emph{shutdown} inside |
835 |
qemu. qemu will automatically exit when the Linux shutdown is done. |
836 |
|
837 |
@item |
838 |
You can boot slightly faster by disabling the probe of non present IDE |
839 |
interfaces. To do so, add the following options on the kernel command |
840 |
line: |
841 |
@example |
842 |
ide1=noprobe ide2=noprobe ide3=noprobe ide4=noprobe ide5=noprobe |
843 |
@end example |
844 |
|
845 |
@item |
846 |
The example disk image is a modified version of the one made by Kevin |
847 |
Lawton for the plex86 Project (@url{www.plex86.org}). |
848 |
|
849 |
@end enumerate |
850 |
|
851 |
@node linux_compile |
852 |
@section Linux Kernel Compilation |
853 |
|
854 |
You can use any linux kernel with QEMU. However, if you want to use |
855 |
@code{qemu-fast} to get maximum performances, you must use a modified |
856 |
guest kernel. If you are using a 2.6 guest kernel, you can use |
857 |
directly the patch @file{linux-2.6-qemu-fast.patch} made by Rusty |
858 |
Russel available in the QEMU source archive. Otherwise, you can make the |
859 |
following changes @emph{by hand} to the Linux kernel: |
860 |
|
861 |
@enumerate |
862 |
@item |
863 |
The kernel must be mapped at 0x90000000 (the default is |
864 |
0xc0000000). You must modify only two lines in the kernel source: |
865 |
|
866 |
In @file{include/asm/page.h}, replace |
867 |
@example |
868 |
#define __PAGE_OFFSET (0xc0000000) |
869 |
@end example |
870 |
by |
871 |
@example |
872 |
#define __PAGE_OFFSET (0x90000000) |
873 |
@end example |
874 |
|
875 |
And in @file{arch/i386/vmlinux.lds}, replace |
876 |
@example |
877 |
. = 0xc0000000 + 0x100000; |
878 |
@end example |
879 |
by |
880 |
@example |
881 |
. = 0x90000000 + 0x100000; |
882 |
@end example |
883 |
|
884 |
@item |
885 |
If you want to enable SMP (Symmetric Multi-Processing) support, you |
886 |
must make the following change in @file{include/asm/fixmap.h}. Replace |
887 |
@example |
888 |
#define FIXADDR_TOP (0xffffX000UL) |
889 |
@end example |
890 |
by |
891 |
@example |
892 |
#define FIXADDR_TOP (0xa7ffX000UL) |
893 |
@end example |
894 |
(X is 'e' or 'f' depending on the kernel version). Although you can |
895 |
use an SMP kernel with QEMU, it only supports one CPU. |
896 |
|
897 |
@item |
898 |
If you are not using a 2.6 kernel as host kernel but if you use a target |
899 |
2.6 kernel, you must also ensure that the 'HZ' define is set to 100 |
900 |
(1000 is the default) as QEMU cannot currently emulate timers at |
901 |
frequencies greater than 100 Hz on host Linux systems < 2.6. In |
902 |
@file{include/asm/param.h}, replace: |
903 |
|
904 |
@example |
905 |
# define HZ 1000 /* Internal kernel timer frequency */ |
906 |
@end example |
907 |
by |
908 |
@example |
909 |
# define HZ 100 /* Internal kernel timer frequency */ |
910 |
@end example |
911 |
|
912 |
@end enumerate |
913 |
|
914 |
The file config-2.x.x gives the configuration of the example kernels. |
915 |
|
916 |
Just type |
917 |
@example |
918 |
make bzImage |
919 |
@end example |
920 |
|
921 |
As you would do to make a real kernel. Then you can use with QEMU |
922 |
exactly the same kernel as you would boot on your PC (in |
923 |
@file{arch/i386/boot/bzImage}). |
924 |
|
925 |
@node gdb_usage |
926 |
@section GDB usage |
927 |
|
928 |
QEMU has a primitive support to work with gdb, so that you can do |
929 |
'Ctrl-C' while the virtual machine is running and inspect its state. |
930 |
|
931 |
In order to use gdb, launch qemu with the '-s' option. It will wait for a |
932 |
gdb connection: |
933 |
@example |
934 |
> qemu -s -kernel arch/i386/boot/bzImage -hda root-2.4.20.img -append "root=/dev/hda" |
935 |
Connected to host network interface: tun0 |
936 |
Waiting gdb connection on port 1234 |
937 |
@end example |
938 |
|
939 |
Then launch gdb on the 'vmlinux' executable: |
940 |
@example |
941 |
> gdb vmlinux |
942 |
@end example |
943 |
|
944 |
In gdb, connect to QEMU: |
945 |
@example |
946 |
(gdb) target remote localhost:1234 |
947 |
@end example |
948 |
|
949 |
Then you can use gdb normally. For example, type 'c' to launch the kernel: |
950 |
@example |
951 |
(gdb) c |
952 |
@end example |
953 |
|
954 |
Here are some useful tips in order to use gdb on system code: |
955 |
|
956 |
@enumerate |
957 |
@item |
958 |
Use @code{info reg} to display all the CPU registers. |
959 |
@item |
960 |
Use @code{x/10i $eip} to display the code at the PC position. |
961 |
@item |
962 |
Use @code{set architecture i8086} to dump 16 bit code. Then use |
963 |
@code{x/10i $cs*16+*eip} to dump the code at the PC position. |
964 |
@end enumerate |
965 |
|
966 |
@section Target OS specific information |
967 |
|
968 |
@subsection Linux |
969 |
|
970 |
To have access to SVGA graphic modes under X11, use the @code{vesa} or |
971 |
the @code{cirrus} X11 driver. For optimal performances, use 16 bit |
972 |
color depth in the guest and the host OS. |
973 |
|
974 |
When using a 2.6 guest Linux kernel, you should add the option |
975 |
@code{clock=pit} on the kernel command line because the 2.6 Linux |
976 |
kernels make very strict real time clock checks by default that QEMU |
977 |
cannot simulate exactly. |
978 |
|
979 |
@subsection Windows |
980 |
|
981 |
If you have a slow host, using Windows 95 is better as it gives the |
982 |
best speed. Windows 2000 is also a good choice. |
983 |
|
984 |
@subsubsection SVGA graphic modes support |
985 |
|
986 |
QEMU emulates a Cirrus Logic GD5446 Video |
987 |
card. All Windows versions starting from Windows 95 should recognize |
988 |
and use this graphic card. For optimal performances, use 16 bit color |
989 |
depth in the guest and the host OS. |
990 |
|
991 |
@subsubsection CPU usage reduction |
992 |
|
993 |
Windows 9x does not correctly use the CPU HLT |
994 |
instruction. The result is that it takes host CPU cycles even when |
995 |
idle. You can install the utility from |
996 |
@url{http://www.user.cityline.ru/~maxamn/amnhltm.zip} to solve this |
997 |
problem. Note that no such tool is needed for NT, 2000 or XP. |
998 |
|
999 |
@subsubsection Windows 2000 disk full problems |
1000 |
|
1001 |
Currently (release 0.6.0) QEMU has a bug which gives a @code{disk |
1002 |
full} error during installation of some releases of Windows 2000. The |
1003 |
workaround is to stop QEMU as soon as you notice that your disk image |
1004 |
size is growing too fast (monitor it with @code{ls -ls}). Then |
1005 |
relaunch QEMU to continue the installation. If you still experience |
1006 |
the problem, relaunch QEMU again. |
1007 |
|
1008 |
Future QEMU releases are likely to correct this bug. |
1009 |
|
1010 |
@subsubsection Windows XP security problems |
1011 |
|
1012 |
Some releases of Windows XP install correctly but give a security |
1013 |
error when booting: |
1014 |
@example |
1015 |
A problem is preventing Windows from accurately checking the |
1016 |
license for this computer. Error code: 0x800703e6. |
1017 |
@end example |
1018 |
The only known workaround is to boot in Safe mode |
1019 |
without networking support. |
1020 |
|
1021 |
Future QEMU releases are likely to correct this bug. |
1022 |
|
1023 |
@subsection MS-DOS and FreeDOS |
1024 |
|
1025 |
@subsubsection CPU usage reduction |
1026 |
|
1027 |
DOS does not correctly use the CPU HLT instruction. The result is that |
1028 |
it takes host CPU cycles even when idle. You can install the utility |
1029 |
from @url{http://www.vmware.com/software/dosidle210.zip} to solve this |
1030 |
problem. |
1031 |
|
1032 |
@chapter QEMU PowerPC System emulator invocation |
1033 |
|
1034 |
Use the executable @file{qemu-system-ppc} to simulate a complete PREP |
1035 |
or PowerMac PowerPC system. |
1036 |
|
1037 |
QEMU emulates the following PowerMac peripherials: |
1038 |
|
1039 |
@itemize @minus |
1040 |
@item |
1041 |
UniNorth PCI Bridge |
1042 |
@item |
1043 |
PCI VGA compatible card with VESA Bochs Extensions |
1044 |
@item |
1045 |
2 PMAC IDE interfaces with hard disk and CD-ROM support |
1046 |
@item |
1047 |
NE2000 PCI adapters |
1048 |
@item |
1049 |
Non Volatile RAM |
1050 |
@item |
1051 |
VIA-CUDA with ADB keyboard and mouse. |
1052 |
@end itemize |
1053 |
|
1054 |
QEMU emulates the following PREP peripherials: |
1055 |
|
1056 |
@itemize @minus |
1057 |
@item |
1058 |
PCI Bridge |
1059 |
@item |
1060 |
PCI VGA compatible card with VESA Bochs Extensions |
1061 |
@item |
1062 |
2 IDE interfaces with hard disk and CD-ROM support |
1063 |
@item |
1064 |
Floppy disk |
1065 |
@item |
1066 |
NE2000 network adapters |
1067 |
@item |
1068 |
Serial port |
1069 |
@item |
1070 |
PREP Non Volatile RAM |
1071 |
@item |
1072 |
PC compatible keyboard and mouse. |
1073 |
@end itemize |
1074 |
|
1075 |
QEMU uses the Open Hack'Ware Open Firmware Compatible BIOS available at |
1076 |
@url{http://site.voila.fr/jmayer/OpenHackWare/index.htm}. |
1077 |
|
1078 |
You can read the qemu PC system emulation chapter to have more |
1079 |
informations about QEMU usage. |
1080 |
|
1081 |
@c man begin OPTIONS |
1082 |
|
1083 |
The following options are specific to the PowerPC emulation: |
1084 |
|
1085 |
@table @option |
1086 |
|
1087 |
@item -prep |
1088 |
Simulate a PREP system (default is PowerMAC) |
1089 |
|
1090 |
@item -g WxH[xDEPTH] |
1091 |
|
1092 |
Set the initial VGA graphic mode. The default is 800x600x15. |
1093 |
|
1094 |
@end table |
1095 |
|
1096 |
@c man end |
1097 |
|
1098 |
|
1099 |
More information is available at |
1100 |
@url{http://jocelyn.mayer.free.fr/qemu-ppc/}. |
1101 |
|
1102 |
@chapter Sparc System emulator invocation |
1103 |
|
1104 |
Use the executable @file{qemu-system-sparc} to simulate a JavaStation |
1105 |
(sun4m architecture). The emulation is far from complete. |
1106 |
|
1107 |
QEMU emulates the following sun4m peripherials: |
1108 |
|
1109 |
@itemize @minus |
1110 |
@item |
1111 |
IOMMU |
1112 |
@item |
1113 |
TCX Frame buffer |
1114 |
@item |
1115 |
Lance (Am7990) Ethernet |
1116 |
@item |
1117 |
Non Volatile RAM M48T08 |
1118 |
@item |
1119 |
Slave I/O: timers, interrupt controllers, Zilog serial ports |
1120 |
@end itemize |
1121 |
|
1122 |
QEMU uses the Proll, a PROM replacement available at |
1123 |
@url{http://people.redhat.com/zaitcev/linux/}. |
1124 |
|
1125 |
@chapter QEMU User space emulator invocation |
1126 |
|
1127 |
@section Quick Start |
1128 |
|
1129 |
In order to launch a Linux process, QEMU needs the process executable |
1130 |
itself and all the target (x86) dynamic libraries used by it. |
1131 |
|
1132 |
@itemize |
1133 |
|
1134 |
@item On x86, you can just try to launch any process by using the native |
1135 |
libraries: |
1136 |
|
1137 |
@example |
1138 |
qemu-i386 -L / /bin/ls |
1139 |
@end example |
1140 |
|
1141 |
@code{-L /} tells that the x86 dynamic linker must be searched with a |
1142 |
@file{/} prefix. |
1143 |
|
1144 |
@item Since QEMU is also a linux process, you can launch qemu with qemu (NOTE: you can only do that if you compiled QEMU from the sources): |
1145 |
|
1146 |
@example |
1147 |
qemu-i386 -L / qemu-i386 -L / /bin/ls |
1148 |
@end example |
1149 |
|
1150 |
@item On non x86 CPUs, you need first to download at least an x86 glibc |
1151 |
(@file{qemu-runtime-i386-XXX-.tar.gz} on the QEMU web page). Ensure that |
1152 |
@code{LD_LIBRARY_PATH} is not set: |
1153 |
|
1154 |
@example |
1155 |
unset LD_LIBRARY_PATH |
1156 |
@end example |
1157 |
|
1158 |
Then you can launch the precompiled @file{ls} x86 executable: |
1159 |
|
1160 |
@example |
1161 |
qemu-i386 tests/i386/ls |
1162 |
@end example |
1163 |
You can look at @file{qemu-binfmt-conf.sh} so that |
1164 |
QEMU is automatically launched by the Linux kernel when you try to |
1165 |
launch x86 executables. It requires the @code{binfmt_misc} module in the |
1166 |
Linux kernel. |
1167 |
|
1168 |
@item The x86 version of QEMU is also included. You can try weird things such as: |
1169 |
@example |
1170 |
qemu-i386 /usr/local/qemu-i386/bin/qemu-i386 /usr/local/qemu-i386/bin/ls-i386 |
1171 |
@end example |
1172 |
|
1173 |
@end itemize |
1174 |
|
1175 |
@section Wine launch |
1176 |
|
1177 |
@itemize |
1178 |
|
1179 |
@item Ensure that you have a working QEMU with the x86 glibc |
1180 |
distribution (see previous section). In order to verify it, you must be |
1181 |
able to do: |
1182 |
|
1183 |
@example |
1184 |
qemu-i386 /usr/local/qemu-i386/bin/ls-i386 |
1185 |
@end example |
1186 |
|
1187 |
@item Download the binary x86 Wine install |
1188 |
(@file{qemu-XXX-i386-wine.tar.gz} on the QEMU web page). |
1189 |
|
1190 |
@item Configure Wine on your account. Look at the provided script |
1191 |
@file{/usr/local/qemu-i386/bin/wine-conf.sh}. Your previous |
1192 |
@code{$@{HOME@}/.wine} directory is saved to @code{$@{HOME@}/.wine.org}. |
1193 |
|
1194 |
@item Then you can try the example @file{putty.exe}: |
1195 |
|
1196 |
@example |
1197 |
qemu-i386 /usr/local/qemu-i386/wine/bin/wine /usr/local/qemu-i386/wine/c/Program\ Files/putty.exe |
1198 |
@end example |
1199 |
|
1200 |
@end itemize |
1201 |
|
1202 |
@section Command line options |
1203 |
|
1204 |
@example |
1205 |
usage: qemu-i386 [-h] [-d] [-L path] [-s size] program [arguments...] |
1206 |
@end example |
1207 |
|
1208 |
@table @option |
1209 |
@item -h |
1210 |
Print the help |
1211 |
@item -L path |
1212 |
Set the x86 elf interpreter prefix (default=/usr/local/qemu-i386) |
1213 |
@item -s size |
1214 |
Set the x86 stack size in bytes (default=524288) |
1215 |
@end table |
1216 |
|
1217 |
Debug options: |
1218 |
|
1219 |
@table @option |
1220 |
@item -d |
1221 |
Activate log (logfile=/tmp/qemu.log) |
1222 |
@item -p pagesize |
1223 |
Act as if the host page size was 'pagesize' bytes |
1224 |
@end table |
1225 |
|
1226 |
@node compilation |
1227 |
@chapter Compilation from the sources |
1228 |
|
1229 |
@section Linux/BSD |
1230 |
|
1231 |
Read the @file{README} which gives the related information. |
1232 |
|
1233 |
@section Windows |
1234 |
|
1235 |
@itemize |
1236 |
@item Install the current versions of MSYS and MinGW from |
1237 |
@url{http://www.mingw.org/}. You can find detailed installation |
1238 |
instructions in the download section and the FAQ. |
1239 |
|
1240 |
@item Download |
1241 |
the MinGW development library of SDL 1.2.x |
1242 |
(@file{SDL-devel-1.2.x-mingw32.tar.gz}) from |
1243 |
@url{http://www.libsdl.org}. Unpack it in a temporary place, and |
1244 |
unpack the archive @file{i386-mingw32msvc.tar.gz} in the MinGW tool |
1245 |
directory. Edit the @file{sdl-config} script so that it gives the |
1246 |
correct SDL directory when invoked. |
1247 |
|
1248 |
@item Extract the current version of QEMU. |
1249 |
|
1250 |
@item Start the MSYS shell (file @file{msys.bat}). |
1251 |
|
1252 |
@item Change to the QEMU directory. Launch @file{./configure} and |
1253 |
@file{make}. If you have problems using SDL, verify that |
1254 |
@file{sdl-config} can be launched from the MSYS command line. |
1255 |
|
1256 |
@item You can install QEMU in @file{Program Files/Qemu} by typing |
1257 |
@file{make install}. Don't forget to copy @file{SDL.dll} in |
1258 |
@file{Program Files/Qemu}. |
1259 |
|
1260 |
@end itemize |
1261 |
|
1262 |
@section Cross compilation for Windows with Linux |
1263 |
|
1264 |
@itemize |
1265 |
@item |
1266 |
Install the MinGW cross compilation tools available at |
1267 |
@url{http://www.mingw.org/}. |
1268 |
|
1269 |
@item |
1270 |
Install the Win32 version of SDL (@url{http://www.libsdl.org}) by |
1271 |
unpacking @file{i386-mingw32msvc.tar.gz}. Set up the PATH environment |
1272 |
variable so that @file{i386-mingw32msvc-sdl-config} can be launched by |
1273 |
the QEMU configuration script. |
1274 |
|
1275 |
@item |
1276 |
Configure QEMU for Windows cross compilation: |
1277 |
@example |
1278 |
./configure --enable-mingw32 |
1279 |
@end example |
1280 |
If necessary, you can change the cross-prefix according to the prefix |
1281 |
choosen for the MinGW tools with --cross-prefix. You can also use |
1282 |
--prefix to set the Win32 install path. |
1283 |
|
1284 |
@item You can install QEMU in the installation directory by typing |
1285 |
@file{make install}. Don't forget to copy @file{SDL.dll} in the |
1286 |
installation directory. |
1287 |
|
1288 |
@end itemize |
1289 |
|
1290 |
Note: Currently, Wine does not seem able to launch |
1291 |
QEMU for Win32. |
1292 |
|
1293 |
@section Mac OS X |
1294 |
|
1295 |
The Mac OS X patches are not fully merged in QEMU, so you should look |
1296 |
at the QEMU mailing list archive to have all the necessary |
1297 |
information. |
1298 |
|