Archipelago » qemu

/*

 * Wacom PenPartner USB tablet emulation.

 *

 * Copyright (c) 2006 Openedhand Ltd.

 * Author: Andrzej Zaborowski <balrog@zabor.org>

 *

 * Based on hw/usb-hid.c:

 * Copyright (c) 2005 Fabrice Bellard

 *

 * Permission is hereby granted, free of charge, to any person obtaining a copy

 * of this software and associated documentation files (the "Software"), to deal

 * in the Software without restriction, including without limitation the rights

 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

 * copies of the Software, and to permit persons to whom the Software is

 * furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice shall be included in

 * all copies or substantial portions of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

 * THE SOFTWARE.

 */

#include "hw.h"

#include "console.h"

#include "usb.h"

/* Interface requests */

#define WACOM_GET_REPORT        0x2101

#define WACOM_SET_REPORT        0x2109

/* HID interface requests */

#define HID_GET_REPORT                0xa101

#define HID_GET_IDLE                0xa102

#define HID_GET_PROTOCOL        0xa103

#define HID_SET_IDLE                0x210a

#define HID_SET_PROTOCOL        0x210b

typedef struct USBWacomState {

    USBDevice dev;

    QEMUPutMouseEntry *eh_entry;

    int dx, dy, dz, buttons_state;

    int x, y;

    int mouse_grabbed;

    enum {

        WACOM_MODE_HID = 1,

        WACOM_MODE_WACOM = 2,

    } mode;

} USBWacomState;

static const uint8_t qemu_wacom_dev_descriptor[] = {

    0x12,        /*  u8 bLength; */

    0x01,        /*  u8 bDescriptorType; Device */

    0x10, 0x10,        /*  u16 bcdUSB; v1.10 */

    0x00,        /*  u8  bDeviceClass; */

    0x00,        /*  u8  bDeviceSubClass; */

    0x00,        /*  u8  bDeviceProtocol; [ low/full speeds only ] */

    0x08,        /*  u8  bMaxPacketSize0; 8 Bytes */

    0x6a, 0x05,        /*  u16 idVendor; */

    0x00, 0x00,        /*  u16 idProduct; */

    0x10, 0x42,        /*  u16 bcdDevice */

    0x01,        /*  u8  iManufacturer; */

    0x02,        /*  u8  iProduct; */

    0x00,        /*  u8  iSerialNumber; */

    0x01,        /*  u8  bNumConfigurations; */

};

static const uint8_t qemu_wacom_config_descriptor[] = {

    /* one configuration */

    0x09,        /*  u8  bLength; */

    0x02,        /*  u8  bDescriptorType; Configuration */

    0x22, 0x00,        /*  u16 wTotalLength; */

    0x01,        /*  u8  bNumInterfaces; (1) */

    0x01,        /*  u8  bConfigurationValue; */

    0x00,        /*  u8  iConfiguration; */

    0x80,        /*  u8  bmAttributes;

                                 Bit 7: must be set,

                                     6: Self-powered,

                                     5: Remote wakeup,

                                     4..0: resvd */

    40,                /*  u8  MaxPower; */

    /* one interface */

    0x09,        /*  u8  if_bLength; */

    0x04,        /*  u8  if_bDescriptorType; Interface */

    0x00,        /*  u8  if_bInterfaceNumber; */

    0x00,        /*  u8  if_bAlternateSetting; */

    0x01,        /*  u8  if_bNumEndpoints; */

    0x03,        /*  u8  if_bInterfaceClass; HID */

    0x01,        /*  u8  if_bInterfaceSubClass; Boot */

    0x02,        /*  u8  if_bInterfaceProtocol; [usb1.1 or single tt] */

    0x00,        /*  u8  if_iInterface; */

    /* HID descriptor */

    0x09,        /*  u8  bLength; */

    0x21,        /*  u8  bDescriptorType; */

    0x01, 0x10,        /*  u16 HID_class */

    0x00,        /*  u8  country_code */

    0x01,        /*  u8  num_descriptors */

    0x22,        /*  u8  type; Report */

    0x6e, 0x00,        /*  u16 len */

    /* one endpoint (status change endpoint) */

    0x07,        /*  u8  ep_bLength; */

    0x05,        /*  u8  ep_bDescriptorType; Endpoint */

    0x81,        /*  u8  ep_bEndpointAddress; IN Endpoint 1 */

    0x03,        /*  u8  ep_bmAttributes; Interrupt */

    0x08, 0x00,        /*  u16 ep_wMaxPacketSize; */

    0x0a,        /*  u8  ep_bInterval; */

};

static void usb_mouse_event(void *opaque,

                            int dx1, int dy1, int dz1, int buttons_state)

{

    USBWacomState *s = opaque;

    s->dx += dx1;

    s->dy += dy1;

    s->dz += dz1;

    s->buttons_state = buttons_state;

}

static void usb_wacom_event(void *opaque,

                            int x, int y, int dz, int buttons_state)

{

    USBWacomState *s = opaque;

    s->x = x;

    s->y = y;

    s->dz += dz;

    s->buttons_state = buttons_state;

}

static inline int int_clamp(int val, int vmin, int vmax)

{

    if (val < vmin)

        return vmin;

    else if (val > vmax)

        return vmax;

    else

        return val;

}

static int usb_mouse_poll(USBWacomState *s, uint8_t *buf, int len)

{

    int dx, dy, dz, b, l;

    if (!s->mouse_grabbed) {

        s->eh_entry = qemu_add_mouse_event_handler(usb_mouse_event, s, 0,

                        "QEMU PenPartner tablet");

        s->mouse_grabbed = 1;

    }

    dx = int_clamp(s->dx, -128, 127);

    dy = int_clamp(s->dy, -128, 127);

    dz = int_clamp(s->dz, -128, 127);

    s->dx -= dx;

    s->dy -= dy;

    s->dz -= dz;

    b = 0;

    if (s->buttons_state & MOUSE_EVENT_LBUTTON)

        b |= 0x01;

    if (s->buttons_state & MOUSE_EVENT_RBUTTON)

        b |= 0x02;

    if (s->buttons_state & MOUSE_EVENT_MBUTTON)

        b |= 0x04;

    buf[0] = b;

    buf[1] = dx;

    buf[2] = dy;

    l = 3;

    if (len >= 4) {

        buf[3] = dz;

        l = 4;

    }

    return l;

}

static int usb_wacom_poll(USBWacomState *s, uint8_t *buf, int len)

{

    int b;

    if (!s->mouse_grabbed) {

        s->eh_entry = qemu_add_mouse_event_handler(usb_wacom_event, s, 1,

                        "QEMU PenPartner tablet");

        s->mouse_grabbed = 1;

    }

    b = 0;

    if (s->buttons_state & MOUSE_EVENT_LBUTTON)

        b |= 0x01;

    if (s->buttons_state & MOUSE_EVENT_RBUTTON)

        b |= 0x02;

    if (s->buttons_state & MOUSE_EVENT_MBUTTON)

        b |= 0x04;

    if (len < 7)

        return 0;

    buf[0] = s->mode;

    buf[5] = 0x00;

    if (b) {

        buf[1] = s->x & 0xff;

        buf[2] = s->x >> 8;

        buf[3] = s->y & 0xff;

        buf[4] = s->y >> 8;

        buf[6] = 0;

    } else {

        buf[1] = 0;

        buf[2] = 0;

        buf[3] = 0;

        buf[4] = 0;

        buf[6] = (unsigned char) -127;

    }

    return 7;

}

static void usb_wacom_handle_reset(USBDevice *dev)

{

    USBWacomState *s = (USBWacomState *) dev;

    s->dx = 0;

    s->dy = 0;

    s->dz = 0;

    s->x = 0;

    s->y = 0;

    s->buttons_state = 0;

    s->mode = WACOM_MODE_HID;

}

static int usb_wacom_handle_control(USBDevice *dev, int request, int value,

                                    int index, int length, uint8_t *data)

{

    USBWacomState *s = (USBWacomState *) dev;

    int ret = 0;

    switch (request) {

    case DeviceRequest | USB_REQ_GET_STATUS:

        data[0] = (1 << USB_DEVICE_SELF_POWERED) |

            (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);

        data[1] = 0x00;

        ret = 2;

        break;

    case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:

        if (value == USB_DEVICE_REMOTE_WAKEUP) {

            dev->remote_wakeup = 0;

        } else {

            goto fail;

        }

        ret = 0;

        break;

    case DeviceOutRequest | USB_REQ_SET_FEATURE:

        if (value == USB_DEVICE_REMOTE_WAKEUP) {

            dev->remote_wakeup = 1;

        } else {

            goto fail;

        }

        ret = 0;

        break;

    case DeviceOutRequest | USB_REQ_SET_ADDRESS:

        dev->addr = value;

        ret = 0;

        break;

    case DeviceRequest | USB_REQ_GET_DESCRIPTOR:

        switch (value >> 8) {

        case USB_DT_DEVICE:

            memcpy(data, qemu_wacom_dev_descriptor,

                   sizeof(qemu_wacom_dev_descriptor));

            ret = sizeof(qemu_wacom_dev_descriptor);

            break;

        case USB_DT_CONFIG:

                   memcpy(data, qemu_wacom_config_descriptor,

                   sizeof(qemu_wacom_config_descriptor));

            ret = sizeof(qemu_wacom_config_descriptor);

            break;

        case USB_DT_STRING:

            switch (value & 0xff) {

            case 0:

                /* language ids */

                data[0] = 4;

                data[1] = 3;

                data[2] = 0x09;

                data[3] = 0x04;

                ret = 4;

                break;

            case 1:

                /* serial number */

                ret = set_usb_string(data, "1");

                break;

            case 2:

                ret = set_usb_string(data, "Wacom PenPartner");

                break;

            case 3:

                /* vendor description */

                ret = set_usb_string(data, "QEMU " QEMU_VERSION);

                break;

            case 4:

                ret = set_usb_string(data, "Wacom Tablet");

                break;

            case 5:

                ret = set_usb_string(data, "Endpoint1 Interrupt Pipe");

                break;

            default:

                goto fail;

            }

            break;

        default:

            goto fail;

        }

        break;

    case DeviceRequest | USB_REQ_GET_CONFIGURATION:

        data[0] = 1;

        ret = 1;

        break;

    case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:

        ret = 0;

        break;

    case DeviceRequest | USB_REQ_GET_INTERFACE:

        data[0] = 0;

        ret = 1;

        break;

    case DeviceOutRequest | USB_REQ_SET_INTERFACE:

        ret = 0;

        break;

    case WACOM_SET_REPORT:

        qemu_remove_mouse_event_handler(s->eh_entry);

        s->mouse_grabbed = 0;

        s->mode = data[0];

        ret = 0;

        break;

    case WACOM_GET_REPORT:

        data[0] = 0;

        data[1] = s->mode;

        ret = 2;

        break;

    /* USB HID requests */

    case HID_GET_REPORT:

        if (s->mode == WACOM_MODE_HID)

            ret = usb_mouse_poll(s, data, length);

        else if (s->mode == WACOM_MODE_WACOM)

            ret = usb_wacom_poll(s, data, length);

        break;

    case HID_SET_IDLE:

        ret = 0;

        break;

    default:

    fail:

        ret = USB_RET_STALL;

        break;

    }

    return ret;

}

static int usb_wacom_handle_data(USBDevice *dev, USBPacket *p)

{

    USBWacomState *s = (USBWacomState *) dev;

    int ret = 0;

    switch (p->pid) {

    case USB_TOKEN_IN:

        if (p->devep == 1) {

            if (s->mode == WACOM_MODE_HID)

                ret = usb_mouse_poll(s, p->data, p->len);

            else if (s->mode == WACOM_MODE_WACOM)

                ret = usb_wacom_poll(s, p->data, p->len);

            break;

        }

        /* Fall through.  */

    case USB_TOKEN_OUT:

    default:

        ret = USB_RET_STALL;

        break;

    }

    return ret;

}

static void usb_wacom_handle_destroy(USBDevice *dev)

{

    USBWacomState *s = (USBWacomState *) dev;

    qemu_remove_mouse_event_handler(s->eh_entry);

    qemu_free(s);

}

USBDevice *usb_wacom_init(void)

{

    USBWacomState *s;

    s = qemu_mallocz(sizeof(USBWacomState));

    s->dev.speed = USB_SPEED_FULL;

    s->dev.handle_packet = usb_generic_handle_packet;

    s->dev.handle_reset = usb_wacom_handle_reset;

    s->dev.handle_control = usb_wacom_handle_control;

    s->dev.handle_data = usb_wacom_handle_data;

    s->dev.handle_destroy = usb_wacom_handle_destroy;

    pstrcpy(s->dev.devname, sizeof(s->dev.devname),

            "QEMU PenPartner Tablet");

    return (USBDevice *) s;

}