Archipelago » qemu

#######################################################################

# QObject

qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o

qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o

qobject-obj-y += qerror.o

#######################################################################

# oslib-obj-y is code depending on the OS (win32 vs posix)

oslib-obj-y = osdep.o

oslib-obj-$(CONFIG_WIN32) += oslib-win32.o

oslib-obj-$(CONFIG_POSIX) += oslib-posix.o

#######################################################################

# block-obj-y is code used by both qemu system emulation and qemu-img

block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o

block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o

block-obj-$(CONFIG_POSIX) += posix-aio-compat.o

block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o

block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o

block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o

block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o

block-nested-$(CONFIG_WIN32) += raw-win32.o

block-nested-$(CONFIG_POSIX) += raw-posix.o

block-nested-$(CONFIG_CURL) += curl.o

block-obj-y +=  $(addprefix block/, $(block-nested-y))

net-obj-y = net.o

net-nested-y = queue.o checksum.o util.o

net-nested-y += socket.o

net-nested-y += dump.o

net-nested-$(CONFIG_POSIX) += tap.o

net-nested-$(CONFIG_LINUX) += tap-linux.o

net-nested-$(CONFIG_WIN32) += tap-win32.o

net-nested-$(CONFIG_BSD) += tap-bsd.o

net-nested-$(CONFIG_SOLARIS) += tap-solaris.o

net-nested-$(CONFIG_AIX) += tap-aix.o

net-nested-$(CONFIG_HAIKU) += tap-haiku.o

net-nested-$(CONFIG_SLIRP) += slirp.o

net-nested-$(CONFIG_VDE) += vde.o

net-obj-y += $(addprefix net/, $(net-nested-y))

ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS),yy)

# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.

# only pull in the actual virtio-9p device if we also enabled virtio.

CONFIG_REALLY_VIRTFS=y

endif

fsdev-nested-$(CONFIG_VIRTFS) = qemu-fsdev.o

fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))

######################################################################

# libqemu_common.a: Target independent part of system emulation. The

# long term path is to suppress *all* target specific code in case of

# system emulation, i.e. a single QEMU executable should support all

# CPUs and machines.

common-obj-y = $(block-obj-y) blockdev.o

common-obj-y += $(net-obj-y)

common-obj-y += $(qobject-obj-y)

common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))

common-obj-y += readline.o console.o cursor.o async.o qemu-error.o

common-obj-y += $(oslib-obj-y)

common-obj-$(CONFIG_WIN32) += os-win32.o

common-obj-$(CONFIG_POSIX) += os-posix.o

common-obj-y += tcg-runtime.o host-utils.o

common-obj-y += irq.o ioport.o input.o

common-obj-$(CONFIG_PTIMER) += ptimer.o

common-obj-$(CONFIG_MAX7310) += max7310.o

common-obj-$(CONFIG_WM8750) += wm8750.o

common-obj-$(CONFIG_TWL92230) += twl92230.o

common-obj-$(CONFIG_TSC2005) += tsc2005.o

common-obj-$(CONFIG_LM832X) += lm832x.o

common-obj-$(CONFIG_TMP105) += tmp105.o

common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o

common-obj-$(CONFIG_SSD0303) += ssd0303.o

common-obj-$(CONFIG_SSD0323) += ssd0323.o

common-obj-$(CONFIG_ADS7846) += ads7846.o

common-obj-$(CONFIG_MAX111X) += max111x.o

common-obj-$(CONFIG_DS1338) += ds1338.o

common-obj-y += i2c.o smbus.o smbus_eeprom.o

common-obj-y += eeprom93xx.o

common-obj-y += scsi-disk.o cdrom.o

common-obj-y += scsi-generic.o scsi-bus.o

common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o

common-obj-y += usb-serial.o usb-net.o usb-bus.o

common-obj-$(CONFIG_SSI) += ssi.o

common-obj-$(CONFIG_SSI_SD) += ssi-sd.o

common-obj-$(CONFIG_SD) += sd.o

common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o

common-obj-y += bt-hci-csr.o

common-obj-y += buffered_file.o migration.o migration-tcp.o qemu-sockets.o

common-obj-y += qemu-char.o savevm.o #aio.o

common-obj-y += msmouse.o ps2.o

common-obj-y += qdev.o qdev-properties.o

common-obj-y += block-migration.o

common-obj-y += pflib.o

common-obj-$(CONFIG_BRLAPI) += baum.o

common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o

common-obj-$(CONFIG_WIN32) += version.o

common-obj-$(CONFIG_SPICE) += ui/spice-core.o ui/spice-input.o ui/spice-display.o

audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o

audio-obj-$(CONFIG_SDL) += sdlaudio.o

audio-obj-$(CONFIG_OSS) += ossaudio.o

audio-obj-$(CONFIG_SPICE) += spiceaudio.o

audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o

audio-obj-$(CONFIG_ALSA) += alsaaudio.o

audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o

audio-obj-$(CONFIG_FMOD) += fmodaudio.o

audio-obj-$(CONFIG_ESD) += esdaudio.o

audio-obj-$(CONFIG_PA) += paaudio.o

audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o

audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o

audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o

audio-obj-y += wavcapture.o

common-obj-y += $(addprefix audio/, $(audio-obj-y))

ui-obj-y += keymaps.o

ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o

ui-obj-$(CONFIG_CURSES) += curses.o

ui-obj-y += vnc.o d3des.o

ui-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o

ui-obj-y += vnc-enc-tight.o vnc-palette.o

ui-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o

ui-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o

ui-obj-$(CONFIG_COCOA) += cocoa.o

ifdef CONFIG_VNC_THREAD

ui-obj-y += vnc-jobs-async.o

else

ui-obj-y += vnc-jobs-sync.o

endif

common-obj-y += $(addprefix ui/, $(ui-obj-y))

common-obj-y += iov.o acl.o

common-obj-$(CONFIG_THREAD) += qemu-thread.o

common-obj-$(CONFIG_IOTHREAD) += compatfd.o

common-obj-y += notify.o event_notifier.o

common-obj-y += qemu-timer.o qemu-timer-common.o

slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o

slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o

slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o

common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))

# xen backend driver support

common-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o

common-obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o

######################################################################

# libuser

user-obj-y =

user-obj-y += envlist.o path.o

user-obj-y += tcg-runtime.o host-utils.o

user-obj-y += cutils.o cache-utils.o

######################################################################

# libhw

hw-obj-y =

hw-obj-y += vl.o loader.o

hw-obj-$(CONFIG_VIRTIO) += virtio.o virtio-console.o

hw-obj-y += fw_cfg.o

# FIXME: Core PCI code and its direct dependencies are required by the

# QMP query-pci command.

hw-obj-y += pci.o pci_bridge.o msix.o msi.o

hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o

hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o

hw-obj-y += watchdog.o

hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o

hw-obj-$(CONFIG_ECC) += ecc.o

hw-obj-$(CONFIG_NAND) += nand.o

hw-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o

hw-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o

hw-obj-$(CONFIG_M48T59) += m48t59.o

hw-obj-$(CONFIG_ESCC) += escc.o

hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o

hw-obj-$(CONFIG_SERIAL) += serial.o

hw-obj-$(CONFIG_PARALLEL) += parallel.o

hw-obj-$(CONFIG_I8254) += i8254.o

hw-obj-$(CONFIG_PCSPK) += pcspk.o

hw-obj-$(CONFIG_PCKBD) += pckbd.o

hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o

hw-obj-$(CONFIG_FDC) += fdc.o

hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o

hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o

hw-obj-$(CONFIG_DMA) += dma.o

# PPC devices

hw-obj-$(CONFIG_OPENPIC) += openpic.o

hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o

# Mac shared devices

hw-obj-$(CONFIG_MACIO) += macio.o

hw-obj-$(CONFIG_CUDA) += cuda.o

hw-obj-$(CONFIG_ADB) += adb.o

hw-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o

hw-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o

# OldWorld PowerMac

hw-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o

hw-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o

# NewWorld PowerMac

hw-obj-$(CONFIG_UNIN_PCI) += unin_pci.o

hw-obj-$(CONFIG_DEC_PCI) += dec_pci.o

# PowerPC E500 boards

hw-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o

# MIPS devices

hw-obj-$(CONFIG_PIIX4) += piix4.o

# PCI watchdog devices

hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o

hw-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o

# PCI network cards

hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o

hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o

hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o

hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o

hw-obj-$(CONFIG_SMC91C111) += smc91c111.o

hw-obj-$(CONFIG_LAN9118) += lan9118.o

hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o

# IDE

hw-obj-$(CONFIG_IDE_CORE) += ide/core.o

hw-obj-$(CONFIG_IDE_QDEV) += ide/qdev.o

hw-obj-$(CONFIG_IDE_PCI) += ide/pci.o

hw-obj-$(CONFIG_IDE_ISA) += ide/isa.o

hw-obj-$(CONFIG_IDE_PIIX) += ide/piix.o

hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o

hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o

hw-obj-$(CONFIG_IDE_VIA) += ide/via.o

# SCSI layer

hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o

hw-obj-$(CONFIG_ESP) += esp.o

hw-obj-y += dma-helpers.o sysbus.o isa-bus.o

hw-obj-y += qdev-addr.o

# VGA

hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o

hw-obj-$(CONFIG_VGA_ISA) += vga-isa.o

hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o

hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o

hw-obj-$(CONFIG_RC4030) += rc4030.o

hw-obj-$(CONFIG_DP8393X) += dp8393x.o

hw-obj-$(CONFIG_DS1225Y) += ds1225y.o

hw-obj-$(CONFIG_MIPSNET) += mipsnet.o

# Sound

sound-obj-y =

sound-obj-$(CONFIG_SB16) += sb16.o

sound-obj-$(CONFIG_ES1370) += es1370.o

sound-obj-$(CONFIG_AC97) += ac97.o

sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o

sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o

sound-obj-$(CONFIG_CS4231A) += cs4231a.o

sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o

adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0

hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)

hw-obj-$(CONFIG_REALLY_VIRTFS) += virtio-9p-debug.o

hw-obj-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o

hw-obj-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o

######################################################################

# libdis

# NOTE: the disassembler code is only needed for debugging

libdis-y =

libdis-$(CONFIG_ALPHA_DIS) += alpha-dis.o

libdis-$(CONFIG_ARM_DIS) += arm-dis.o

libdis-$(CONFIG_CRIS_DIS) += cris-dis.o

libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o

libdis-$(CONFIG_I386_DIS) += i386-dis.o

libdis-$(CONFIG_IA64_DIS) += ia64-dis.o

libdis-$(CONFIG_M68K_DIS) += m68k-dis.o

libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o

libdis-$(CONFIG_MIPS_DIS) += mips-dis.o

libdis-$(CONFIG_PPC_DIS) += ppc-dis.o

libdis-$(CONFIG_S390_DIS) += s390-dis.o

libdis-$(CONFIG_SH4_DIS) += sh4-dis.o

libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o

######################################################################

# trace

ifeq ($(TRACE_BACKEND),dtrace)

trace-obj-y = trace-dtrace.o

else

trace-obj-y = trace.o

ifeq ($(TRACE_BACKEND),simple)

trace-obj-y += simpletrace.o

user-obj-y += qemu-timer-common.o

endif

endif

vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)

vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)