root / hw / pflash_cfi01.c @ eae6bcbf
History | View | Annotate | Download (17.4 kB)
1 |
/*
|
---|---|
2 |
* CFI parallel flash with Intel command set emulation
|
3 |
*
|
4 |
* Copyright (c) 2006 Thorsten Zitterell
|
5 |
* Copyright (c) 2005 Jocelyn Mayer
|
6 |
*
|
7 |
* This library is free software; you can redistribute it and/or
|
8 |
* modify it under the terms of the GNU Lesser General Public
|
9 |
* License as published by the Free Software Foundation; either
|
10 |
* version 2 of the License, or (at your option) any later version.
|
11 |
*
|
12 |
* This library is distributed in the hope that it will be useful,
|
13 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
14 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
15 |
* Lesser General Public License for more details.
|
16 |
*
|
17 |
* You should have received a copy of the GNU Lesser General Public
|
18 |
* License along with this library; if not, write to the Free Software
|
19 |
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
|
20 |
*/
|
21 |
|
22 |
/*
|
23 |
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
24 |
* Supported commands/modes are:
|
25 |
* - flash read
|
26 |
* - flash write
|
27 |
* - flash ID read
|
28 |
* - sector erase
|
29 |
* - CFI queries
|
30 |
*
|
31 |
* It does not support timings
|
32 |
* It does not support flash interleaving
|
33 |
* It does not implement software data protection as found in many real chips
|
34 |
* It does not implement erase suspend/resume commands
|
35 |
* It does not implement multiple sectors erase
|
36 |
*
|
37 |
* It does not implement much more ...
|
38 |
*/
|
39 |
|
40 |
#include "hw.h" |
41 |
#include "flash.h" |
42 |
#include "block.h" |
43 |
#include "qemu-timer.h" |
44 |
|
45 |
#define PFLASH_BUG(fmt, ...) \
|
46 |
do { \
|
47 |
printf("PFLASH: Possible BUG - " fmt, ## __VA_ARGS__); \ |
48 |
exit(1); \
|
49 |
} while(0) |
50 |
|
51 |
/* #define PFLASH_DEBUG */
|
52 |
#ifdef PFLASH_DEBUG
|
53 |
#define DPRINTF(fmt, ...) \
|
54 |
do { \
|
55 |
printf("PFLASH: " fmt , ## __VA_ARGS__); \ |
56 |
} while (0) |
57 |
#else
|
58 |
#define DPRINTF(fmt, ...) do { } while (0) |
59 |
#endif
|
60 |
|
61 |
struct pflash_t {
|
62 |
BlockDriverState *bs; |
63 |
target_phys_addr_t base; |
64 |
target_phys_addr_t sector_len; |
65 |
target_phys_addr_t total_len; |
66 |
int width;
|
67 |
int wcycle; /* if 0, the flash is read normally */ |
68 |
int bypass;
|
69 |
int ro;
|
70 |
uint8_t cmd; |
71 |
uint8_t status; |
72 |
uint16_t ident[4];
|
73 |
uint8_t cfi_len; |
74 |
uint8_t cfi_table[0x52];
|
75 |
target_phys_addr_t counter; |
76 |
QEMUTimer *timer; |
77 |
ram_addr_t off; |
78 |
int fl_mem;
|
79 |
void *storage;
|
80 |
}; |
81 |
|
82 |
static void pflash_timer (void *opaque) |
83 |
{ |
84 |
pflash_t *pfl = opaque; |
85 |
|
86 |
DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
|
87 |
/* Reset flash */
|
88 |
pfl->status ^= 0x80;
|
89 |
if (pfl->bypass) {
|
90 |
pfl->wcycle = 2;
|
91 |
} else {
|
92 |
cpu_register_physical_memory(pfl->base, pfl->total_len, |
93 |
pfl->off | IO_MEM_ROMD | pfl->fl_mem); |
94 |
pfl->wcycle = 0;
|
95 |
} |
96 |
pfl->cmd = 0;
|
97 |
} |
98 |
|
99 |
static uint32_t pflash_read (pflash_t *pfl, target_phys_addr_t offset,
|
100 |
int width)
|
101 |
{ |
102 |
target_phys_addr_t boff; |
103 |
uint32_t ret; |
104 |
uint8_t *p; |
105 |
|
106 |
ret = -1;
|
107 |
boff = offset & 0xFF; /* why this here ?? */ |
108 |
|
109 |
if (pfl->width == 2) |
110 |
boff = boff >> 1;
|
111 |
else if (pfl->width == 4) |
112 |
boff = boff >> 2;
|
113 |
|
114 |
DPRINTF("%s: reading offset " TARGET_FMT_lx " under cmd %02x width %d\n", |
115 |
__func__, offset, pfl->cmd, width); |
116 |
|
117 |
switch (pfl->cmd) {
|
118 |
case 0x00: |
119 |
/* Flash area read */
|
120 |
p = pfl->storage; |
121 |
switch (width) {
|
122 |
case 1: |
123 |
ret = p[offset]; |
124 |
DPRINTF("%s: data offset " TARGET_FMT_lx " %02x\n", |
125 |
__func__, offset, ret); |
126 |
break;
|
127 |
case 2: |
128 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
129 |
ret = p[offset] << 8;
|
130 |
ret |= p[offset + 1];
|
131 |
#else
|
132 |
ret = p[offset]; |
133 |
ret |= p[offset + 1] << 8; |
134 |
#endif
|
135 |
DPRINTF("%s: data offset " TARGET_FMT_lx " %04x\n", |
136 |
__func__, offset, ret); |
137 |
break;
|
138 |
case 4: |
139 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
140 |
ret = p[offset] << 24;
|
141 |
ret |= p[offset + 1] << 16; |
142 |
ret |= p[offset + 2] << 8; |
143 |
ret |= p[offset + 3];
|
144 |
#else
|
145 |
ret = p[offset]; |
146 |
ret |= p[offset + 1] << 8; |
147 |
ret |= p[offset + 1] << 8; |
148 |
ret |= p[offset + 2] << 16; |
149 |
ret |= p[offset + 3] << 24; |
150 |
#endif
|
151 |
DPRINTF("%s: data offset " TARGET_FMT_lx " %08x\n", |
152 |
__func__, offset, ret); |
153 |
break;
|
154 |
default:
|
155 |
DPRINTF("BUG in %s\n", __func__);
|
156 |
} |
157 |
|
158 |
break;
|
159 |
case 0x20: /* Block erase */ |
160 |
case 0x50: /* Clear status register */ |
161 |
case 0x60: /* Block /un)lock */ |
162 |
case 0x70: /* Status Register */ |
163 |
case 0xe8: /* Write block */ |
164 |
/* Status register read */
|
165 |
ret = pfl->status; |
166 |
DPRINTF("%s: status %x\n", __func__, ret);
|
167 |
break;
|
168 |
case 0x98: /* Query mode */ |
169 |
if (boff > pfl->cfi_len)
|
170 |
ret = 0;
|
171 |
else
|
172 |
ret = pfl->cfi_table[boff]; |
173 |
break;
|
174 |
default:
|
175 |
/* This should never happen : reset state & treat it as a read */
|
176 |
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
177 |
pfl->wcycle = 0;
|
178 |
pfl->cmd = 0;
|
179 |
} |
180 |
return ret;
|
181 |
} |
182 |
|
183 |
/* update flash content on disk */
|
184 |
static void pflash_update(pflash_t *pfl, int offset, |
185 |
int size)
|
186 |
{ |
187 |
int offset_end;
|
188 |
if (pfl->bs) {
|
189 |
offset_end = offset + size; |
190 |
/* round to sectors */
|
191 |
offset = offset >> 9;
|
192 |
offset_end = (offset_end + 511) >> 9; |
193 |
bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
|
194 |
offset_end - offset); |
195 |
} |
196 |
} |
197 |
|
198 |
static void inline pflash_data_write(pflash_t *pfl, target_phys_addr_t offset, |
199 |
uint32_t value, int width)
|
200 |
{ |
201 |
uint8_t *p = pfl->storage; |
202 |
|
203 |
DPRINTF("%s: block write offset " TARGET_FMT_lx
|
204 |
" value %x counter " TARGET_FMT_lx "\n", |
205 |
__func__, offset, value, pfl->counter); |
206 |
switch (width) {
|
207 |
case 1: |
208 |
p[offset] = value; |
209 |
pflash_update(pfl, offset, 1);
|
210 |
break;
|
211 |
case 2: |
212 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
213 |
p[offset] = value >> 8;
|
214 |
p[offset + 1] = value;
|
215 |
#else
|
216 |
p[offset] = value; |
217 |
p[offset + 1] = value >> 8; |
218 |
#endif
|
219 |
pflash_update(pfl, offset, 2);
|
220 |
break;
|
221 |
case 4: |
222 |
#if defined(TARGET_WORDS_BIGENDIAN)
|
223 |
p[offset] = value >> 24;
|
224 |
p[offset + 1] = value >> 16; |
225 |
p[offset + 2] = value >> 8; |
226 |
p[offset + 3] = value;
|
227 |
#else
|
228 |
p[offset] = value; |
229 |
p[offset + 1] = value >> 8; |
230 |
p[offset + 2] = value >> 16; |
231 |
p[offset + 3] = value >> 24; |
232 |
#endif
|
233 |
pflash_update(pfl, offset, 4);
|
234 |
break;
|
235 |
} |
236 |
|
237 |
} |
238 |
|
239 |
static void pflash_write(pflash_t *pfl, target_phys_addr_t offset, |
240 |
uint32_t value, int width)
|
241 |
{ |
242 |
target_phys_addr_t boff; |
243 |
uint8_t *p; |
244 |
uint8_t cmd; |
245 |
|
246 |
cmd = value; |
247 |
|
248 |
DPRINTF("%s: writing offset " TARGET_FMT_lx " value %08x width %d wcycle 0x%x\n", |
249 |
__func__, offset, value, width, pfl->wcycle); |
250 |
|
251 |
/* Set the device in I/O access mode */
|
252 |
cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem); |
253 |
boff = offset & (pfl->sector_len - 1);
|
254 |
|
255 |
if (pfl->width == 2) |
256 |
boff = boff >> 1;
|
257 |
else if (pfl->width == 4) |
258 |
boff = boff >> 2;
|
259 |
|
260 |
switch (pfl->wcycle) {
|
261 |
case 0: |
262 |
/* read mode */
|
263 |
switch (cmd) {
|
264 |
case 0x00: /* ??? */ |
265 |
goto reset_flash;
|
266 |
case 0x10: /* Single Byte Program */ |
267 |
case 0x40: /* Single Byte Program */ |
268 |
DPRINTF(stderr, "%s: Single Byte Program\n", __func__);
|
269 |
break;
|
270 |
case 0x20: /* Block erase */ |
271 |
p = pfl->storage; |
272 |
offset &= ~(pfl->sector_len - 1);
|
273 |
|
274 |
DPRINTF("%s: block erase at " TARGET_FMT_lx " bytes " |
275 |
TARGET_FMT_lx "\n",
|
276 |
__func__, offset, pfl->sector_len); |
277 |
|
278 |
memset(p + offset, 0xff, pfl->sector_len);
|
279 |
pflash_update(pfl, offset, pfl->sector_len); |
280 |
pfl->status |= 0x80; /* Ready! */ |
281 |
break;
|
282 |
case 0x50: /* Clear status bits */ |
283 |
DPRINTF("%s: Clear status bits\n", __func__);
|
284 |
pfl->status = 0x0;
|
285 |
goto reset_flash;
|
286 |
case 0x60: /* Block (un)lock */ |
287 |
DPRINTF("%s: Block unlock\n", __func__);
|
288 |
break;
|
289 |
case 0x70: /* Status Register */ |
290 |
DPRINTF("%s: Read status register\n", __func__);
|
291 |
pfl->cmd = cmd; |
292 |
return;
|
293 |
case 0x98: /* CFI query */ |
294 |
DPRINTF("%s: CFI query\n", __func__);
|
295 |
break;
|
296 |
case 0xe8: /* Write to buffer */ |
297 |
DPRINTF("%s: Write to buffer\n", __func__);
|
298 |
pfl->status |= 0x80; /* Ready! */ |
299 |
break;
|
300 |
case 0xff: /* Read array mode */ |
301 |
DPRINTF("%s: Read array mode\n", __func__);
|
302 |
goto reset_flash;
|
303 |
default:
|
304 |
goto error_flash;
|
305 |
} |
306 |
pfl->wcycle++; |
307 |
pfl->cmd = cmd; |
308 |
return;
|
309 |
case 1: |
310 |
switch (pfl->cmd) {
|
311 |
case 0x10: /* Single Byte Program */ |
312 |
case 0x40: /* Single Byte Program */ |
313 |
DPRINTF("%s: Single Byte Program\n", __func__);
|
314 |
pflash_data_write(pfl, offset, value, width); |
315 |
pfl->status |= 0x80; /* Ready! */ |
316 |
pfl->wcycle = 0;
|
317 |
break;
|
318 |
case 0x20: /* Block erase */ |
319 |
case 0x28: |
320 |
if (cmd == 0xd0) { /* confirm */ |
321 |
pfl->wcycle = 0;
|
322 |
pfl->status |= 0x80;
|
323 |
} else if (cmd == 0xff) { /* read array mode */ |
324 |
goto reset_flash;
|
325 |
} else
|
326 |
goto error_flash;
|
327 |
|
328 |
break;
|
329 |
case 0xe8: |
330 |
DPRINTF("%s: block write of %x bytes\n", __func__, value);
|
331 |
pfl->counter = value; |
332 |
pfl->wcycle++; |
333 |
break;
|
334 |
case 0x60: |
335 |
if (cmd == 0xd0) { |
336 |
pfl->wcycle = 0;
|
337 |
pfl->status |= 0x80;
|
338 |
} else if (cmd == 0x01) { |
339 |
pfl->wcycle = 0;
|
340 |
pfl->status |= 0x80;
|
341 |
} else if (cmd == 0xff) { |
342 |
goto reset_flash;
|
343 |
} else {
|
344 |
DPRINTF("%s: Unknown (un)locking command\n", __func__);
|
345 |
goto reset_flash;
|
346 |
} |
347 |
break;
|
348 |
case 0x98: |
349 |
if (cmd == 0xff) { |
350 |
goto reset_flash;
|
351 |
} else {
|
352 |
DPRINTF("%s: leaving query mode\n", __func__);
|
353 |
} |
354 |
break;
|
355 |
default:
|
356 |
goto error_flash;
|
357 |
} |
358 |
return;
|
359 |
case 2: |
360 |
switch (pfl->cmd) {
|
361 |
case 0xe8: /* Block write */ |
362 |
pflash_data_write(pfl, offset, value, width); |
363 |
|
364 |
pfl->status |= 0x80;
|
365 |
|
366 |
if (!pfl->counter) {
|
367 |
DPRINTF("%s: block write finished\n", __func__);
|
368 |
pfl->wcycle++; |
369 |
} |
370 |
|
371 |
pfl->counter--; |
372 |
break;
|
373 |
default:
|
374 |
goto error_flash;
|
375 |
} |
376 |
return;
|
377 |
case 3: /* Confirm mode */ |
378 |
switch (pfl->cmd) {
|
379 |
case 0xe8: /* Block write */ |
380 |
if (cmd == 0xd0) { |
381 |
pfl->wcycle = 0;
|
382 |
pfl->status |= 0x80;
|
383 |
} else {
|
384 |
DPRINTF("%s: unknown command for \"write block\"\n", __func__);
|
385 |
PFLASH_BUG("Write block confirm");
|
386 |
goto reset_flash;
|
387 |
} |
388 |
break;
|
389 |
default:
|
390 |
goto error_flash;
|
391 |
} |
392 |
return;
|
393 |
default:
|
394 |
/* Should never happen */
|
395 |
DPRINTF("%s: invalid write state\n", __func__);
|
396 |
goto reset_flash;
|
397 |
} |
398 |
return;
|
399 |
|
400 |
error_flash:
|
401 |
printf("%s: Unimplemented flash cmd sequence "
|
402 |
"(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)\n", |
403 |
__func__, offset, pfl->wcycle, pfl->cmd, value); |
404 |
|
405 |
reset_flash:
|
406 |
cpu_register_physical_memory(pfl->base, pfl->total_len, |
407 |
pfl->off | IO_MEM_ROMD | pfl->fl_mem); |
408 |
|
409 |
pfl->bypass = 0;
|
410 |
pfl->wcycle = 0;
|
411 |
pfl->cmd = 0;
|
412 |
return;
|
413 |
} |
414 |
|
415 |
|
416 |
static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr) |
417 |
{ |
418 |
return pflash_read(opaque, addr, 1); |
419 |
} |
420 |
|
421 |
static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr) |
422 |
{ |
423 |
pflash_t *pfl = opaque; |
424 |
|
425 |
return pflash_read(pfl, addr, 2); |
426 |
} |
427 |
|
428 |
static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr) |
429 |
{ |
430 |
pflash_t *pfl = opaque; |
431 |
|
432 |
return pflash_read(pfl, addr, 4); |
433 |
} |
434 |
|
435 |
static void pflash_writeb (void *opaque, target_phys_addr_t addr, |
436 |
uint32_t value) |
437 |
{ |
438 |
pflash_write(opaque, addr, value, 1);
|
439 |
} |
440 |
|
441 |
static void pflash_writew (void *opaque, target_phys_addr_t addr, |
442 |
uint32_t value) |
443 |
{ |
444 |
pflash_t *pfl = opaque; |
445 |
|
446 |
pflash_write(pfl, addr, value, 2);
|
447 |
} |
448 |
|
449 |
static void pflash_writel (void *opaque, target_phys_addr_t addr, |
450 |
uint32_t value) |
451 |
{ |
452 |
pflash_t *pfl = opaque; |
453 |
|
454 |
pflash_write(pfl, addr, value, 4);
|
455 |
} |
456 |
|
457 |
static CPUWriteMemoryFunc *pflash_write_ops[] = {
|
458 |
&pflash_writeb, |
459 |
&pflash_writew, |
460 |
&pflash_writel, |
461 |
}; |
462 |
|
463 |
static CPUReadMemoryFunc *pflash_read_ops[] = {
|
464 |
&pflash_readb, |
465 |
&pflash_readw, |
466 |
&pflash_readl, |
467 |
}; |
468 |
|
469 |
/* Count trailing zeroes of a 32 bits quantity */
|
470 |
static int ctz32 (uint32_t n) |
471 |
{ |
472 |
int ret;
|
473 |
|
474 |
ret = 0;
|
475 |
if (!(n & 0xFFFF)) { |
476 |
ret += 16;
|
477 |
n = n >> 16;
|
478 |
} |
479 |
if (!(n & 0xFF)) { |
480 |
ret += 8;
|
481 |
n = n >> 8;
|
482 |
} |
483 |
if (!(n & 0xF)) { |
484 |
ret += 4;
|
485 |
n = n >> 4;
|
486 |
} |
487 |
if (!(n & 0x3)) { |
488 |
ret += 2;
|
489 |
n = n >> 2;
|
490 |
} |
491 |
if (!(n & 0x1)) { |
492 |
ret++; |
493 |
n = n >> 1;
|
494 |
} |
495 |
#if 0 /* This is not necessary as n is never 0 */
|
496 |
if (!n)
|
497 |
ret++;
|
498 |
#endif
|
499 |
|
500 |
return ret;
|
501 |
} |
502 |
|
503 |
pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off, |
504 |
BlockDriverState *bs, uint32_t sector_len, |
505 |
int nb_blocs, int width, |
506 |
uint16_t id0, uint16_t id1, |
507 |
uint16_t id2, uint16_t id3) |
508 |
{ |
509 |
pflash_t *pfl; |
510 |
target_phys_addr_t total_len; |
511 |
|
512 |
total_len = sector_len * nb_blocs; |
513 |
|
514 |
/* XXX: to be fixed */
|
515 |
#if 0
|
516 |
if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
|
517 |
total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
|
518 |
return NULL;
|
519 |
#endif
|
520 |
|
521 |
pfl = qemu_mallocz(sizeof(pflash_t));
|
522 |
|
523 |
/* FIXME: Allocate ram ourselves. */
|
524 |
pfl->storage = qemu_get_ram_ptr(off); |
525 |
pfl->fl_mem = cpu_register_io_memory( |
526 |
pflash_read_ops, pflash_write_ops, pfl); |
527 |
pfl->off = off; |
528 |
cpu_register_physical_memory(base, total_len, |
529 |
off | pfl->fl_mem | IO_MEM_ROMD); |
530 |
|
531 |
pfl->bs = bs; |
532 |
if (pfl->bs) {
|
533 |
/* read the initial flash content */
|
534 |
bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9); |
535 |
} |
536 |
#if 0 /* XXX: there should be a bit to set up read-only,
|
537 |
* the same way the hardware does (with WP pin).
|
538 |
*/
|
539 |
pfl->ro = 1;
|
540 |
#else
|
541 |
pfl->ro = 0;
|
542 |
#endif
|
543 |
pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl); |
544 |
pfl->base = base; |
545 |
pfl->sector_len = sector_len; |
546 |
pfl->total_len = total_len; |
547 |
pfl->width = width; |
548 |
pfl->wcycle = 0;
|
549 |
pfl->cmd = 0;
|
550 |
pfl->status = 0;
|
551 |
pfl->ident[0] = id0;
|
552 |
pfl->ident[1] = id1;
|
553 |
pfl->ident[2] = id2;
|
554 |
pfl->ident[3] = id3;
|
555 |
/* Hardcoded CFI table */
|
556 |
pfl->cfi_len = 0x52;
|
557 |
/* Standard "QRY" string */
|
558 |
pfl->cfi_table[0x10] = 'Q'; |
559 |
pfl->cfi_table[0x11] = 'R'; |
560 |
pfl->cfi_table[0x12] = 'Y'; |
561 |
/* Command set (Intel) */
|
562 |
pfl->cfi_table[0x13] = 0x01; |
563 |
pfl->cfi_table[0x14] = 0x00; |
564 |
/* Primary extended table address (none) */
|
565 |
pfl->cfi_table[0x15] = 0x31; |
566 |
pfl->cfi_table[0x16] = 0x00; |
567 |
/* Alternate command set (none) */
|
568 |
pfl->cfi_table[0x17] = 0x00; |
569 |
pfl->cfi_table[0x18] = 0x00; |
570 |
/* Alternate extended table (none) */
|
571 |
pfl->cfi_table[0x19] = 0x00; |
572 |
pfl->cfi_table[0x1A] = 0x00; |
573 |
/* Vcc min */
|
574 |
pfl->cfi_table[0x1B] = 0x45; |
575 |
/* Vcc max */
|
576 |
pfl->cfi_table[0x1C] = 0x55; |
577 |
/* Vpp min (no Vpp pin) */
|
578 |
pfl->cfi_table[0x1D] = 0x00; |
579 |
/* Vpp max (no Vpp pin) */
|
580 |
pfl->cfi_table[0x1E] = 0x00; |
581 |
/* Reserved */
|
582 |
pfl->cfi_table[0x1F] = 0x07; |
583 |
/* Timeout for min size buffer write */
|
584 |
pfl->cfi_table[0x20] = 0x07; |
585 |
/* Typical timeout for block erase */
|
586 |
pfl->cfi_table[0x21] = 0x0a; |
587 |
/* Typical timeout for full chip erase (4096 ms) */
|
588 |
pfl->cfi_table[0x22] = 0x00; |
589 |
/* Reserved */
|
590 |
pfl->cfi_table[0x23] = 0x04; |
591 |
/* Max timeout for buffer write */
|
592 |
pfl->cfi_table[0x24] = 0x04; |
593 |
/* Max timeout for block erase */
|
594 |
pfl->cfi_table[0x25] = 0x04; |
595 |
/* Max timeout for chip erase */
|
596 |
pfl->cfi_table[0x26] = 0x00; |
597 |
/* Device size */
|
598 |
pfl->cfi_table[0x27] = ctz32(total_len); // + 1; |
599 |
/* Flash device interface (8 & 16 bits) */
|
600 |
pfl->cfi_table[0x28] = 0x02; |
601 |
pfl->cfi_table[0x29] = 0x00; |
602 |
/* Max number of bytes in multi-bytes write */
|
603 |
pfl->cfi_table[0x2A] = 0x0B; |
604 |
pfl->cfi_table[0x2B] = 0x00; |
605 |
/* Number of erase block regions (uniform) */
|
606 |
pfl->cfi_table[0x2C] = 0x01; |
607 |
/* Erase block region 1 */
|
608 |
pfl->cfi_table[0x2D] = nb_blocs - 1; |
609 |
pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8; |
610 |
pfl->cfi_table[0x2F] = sector_len >> 8; |
611 |
pfl->cfi_table[0x30] = sector_len >> 16; |
612 |
|
613 |
/* Extended */
|
614 |
pfl->cfi_table[0x31] = 'P'; |
615 |
pfl->cfi_table[0x32] = 'R'; |
616 |
pfl->cfi_table[0x33] = 'I'; |
617 |
|
618 |
pfl->cfi_table[0x34] = '1'; |
619 |
pfl->cfi_table[0x35] = '1'; |
620 |
|
621 |
pfl->cfi_table[0x36] = 0x00; |
622 |
pfl->cfi_table[0x37] = 0x00; |
623 |
pfl->cfi_table[0x38] = 0x00; |
624 |
pfl->cfi_table[0x39] = 0x00; |
625 |
|
626 |
pfl->cfi_table[0x3a] = 0x00; |
627 |
|
628 |
pfl->cfi_table[0x3b] = 0x00; |
629 |
pfl->cfi_table[0x3c] = 0x00; |
630 |
|
631 |
return pfl;
|
632 |
} |