Revision ee0ea1d0
b/hw/piix_pci.c | ||
---|---|---|
52 | 52 |
return (irq_num + slot_addend) & 3; |
53 | 53 |
} |
54 | 54 |
|
55 |
PCIBus *i440fx_init(void) |
|
55 |
static uint32_t isa_page_descs[384 / 4]; |
|
56 |
static uint8_t smm_enabled; |
|
57 |
|
|
58 |
static const uint32_t mar_addresses[15] = { |
|
59 |
0xa0000, |
|
60 |
0xc0000, |
|
61 |
0xc4000, |
|
62 |
0xc8000, |
|
63 |
0xcc000, |
|
64 |
0xd0000, |
|
65 |
0xd4000, |
|
66 |
0xd8000, |
|
67 |
0xdc000, |
|
68 |
0xe0000, |
|
69 |
0xe4000, |
|
70 |
0xe8000, |
|
71 |
0xec000, |
|
72 |
0xf0000, |
|
73 |
0x100000, |
|
74 |
}; |
|
75 |
|
|
76 |
static void i440fx_update_memory_mappings(PCIDevice *d) |
|
77 |
{ |
|
78 |
int i, r; |
|
79 |
uint32_t start, end, addr; |
|
80 |
uint32_t smram, smbase, smsize; |
|
81 |
|
|
82 |
for(i = 0; i < 14; i++) { |
|
83 |
r = (d->config[(i >> 1) + 0x61] >> ((i & 1) * 4)) & 3; |
|
84 |
start = mar_addresses[i]; |
|
85 |
end = mar_addresses[i + 1]; |
|
86 |
// printf("ISA mapping %08x: %d\n", start, r); |
|
87 |
switch(r) { |
|
88 |
case 3: |
|
89 |
/* RAM */ |
|
90 |
cpu_register_physical_memory(start, end - start, |
|
91 |
start); |
|
92 |
break; |
|
93 |
case 2: |
|
94 |
/* ROM (XXX: not quite correct) */ |
|
95 |
cpu_register_physical_memory(start, end - start, |
|
96 |
start | IO_MEM_ROM); |
|
97 |
break; |
|
98 |
case 1: |
|
99 |
case 0: |
|
100 |
/* XXX: should distinguish read/write cases */ |
|
101 |
for(addr = start; addr < end; addr += 4096) { |
|
102 |
cpu_register_physical_memory(addr, 4096, |
|
103 |
isa_page_descs[(addr - 0xa0000) >> 12]); |
|
104 |
} |
|
105 |
break; |
|
106 |
} |
|
107 |
} |
|
108 |
smram = le32_to_cpu(*(uint32_t *)(d->config + 0x6c)); |
|
109 |
if ((smm_enabled && (smram & 0x80000000)) || (smram & (1 << 26))) { |
|
110 |
/* Note: we assume the SMM area is in the 0xa0000-0x100000 range */ |
|
111 |
smbase = (smram & 0xffff) << 16; |
|
112 |
smsize = (((smram >> 20) & 0xf) + 1) << 16; |
|
113 |
if (smbase >= 0xa0000 && (smbase + smsize) <= 0x100000) { |
|
114 |
cpu_register_physical_memory(smbase, smsize, smbase); |
|
115 |
} |
|
116 |
} |
|
117 |
} |
|
118 |
|
|
119 |
void i440fx_set_smm(PCIDevice *d, int val) |
|
120 |
{ |
|
121 |
val = (val != 0); |
|
122 |
if (smm_enabled != val) { |
|
123 |
smm_enabled = val; |
|
124 |
i440fx_update_memory_mappings(d); |
|
125 |
} |
|
126 |
} |
|
127 |
|
|
128 |
|
|
129 |
/* XXX: suppress when better memory API. We make the assumption that |
|
130 |
no device (in particular the VGA) changes the memory mappings in |
|
131 |
the 0xa0000-0x100000 range */ |
|
132 |
void i440fx_init_memory_mappings(PCIDevice *d) |
|
133 |
{ |
|
134 |
int i; |
|
135 |
for(i = 0; i < 96; i++) { |
|
136 |
isa_page_descs[i] = cpu_get_physical_page_desc(0xa0000 + i * 0x1000); |
|
137 |
} |
|
138 |
} |
|
139 |
|
|
140 |
static void i440fx_write_config(PCIDevice *d, |
|
141 |
uint32_t address, uint32_t val, int len) |
|
142 |
{ |
|
143 |
/* XXX: implement SMRAM.D_LOCK */ |
|
144 |
pci_default_write_config(d, address, val, len); |
|
145 |
if ((address >= 0x61 && address <= 0x67) || address == 0x6c) |
|
146 |
i440fx_update_memory_mappings(d); |
|
147 |
} |
|
148 |
|
|
149 |
static void i440fx_save(QEMUFile* f, void *opaque) |
|
150 |
{ |
|
151 |
PCIDevice *d = opaque; |
|
152 |
pci_device_save(d, f); |
|
153 |
qemu_put_8s(f, &smm_enabled); |
|
154 |
} |
|
155 |
|
|
156 |
static int i440fx_load(QEMUFile* f, void *opaque, int version_id) |
|
157 |
{ |
|
158 |
PCIDevice *d = opaque; |
|
159 |
int ret; |
|
160 |
|
|
161 |
if (version_id != 1) |
|
162 |
return -EINVAL; |
|
163 |
ret = pci_device_load(d, f); |
|
164 |
if (ret < 0) |
|
165 |
return ret; |
|
166 |
i440fx_update_memory_mappings(d); |
|
167 |
qemu_get_8s(f, &smm_enabled); |
|
168 |
return 0; |
|
169 |
} |
|
170 |
|
|
171 |
PCIBus *i440fx_init(PCIDevice **pi440fx_state) |
|
56 | 172 |
{ |
57 | 173 |
PCIBus *b; |
58 | 174 |
PCIDevice *d; |
... | ... | |
73 | 189 |
register_ioport_read(0xcfc, 4, 4, pci_host_data_readl, s); |
74 | 190 |
|
75 | 191 |
d = pci_register_device(b, "i440FX", sizeof(PCIDevice), 0, |
76 |
NULL, NULL);
|
|
192 |
NULL, i440fx_write_config);
|
|
77 | 193 |
|
78 | 194 |
d->config[0x00] = 0x86; // vendor_id |
79 | 195 |
d->config[0x01] = 0x80; |
... | ... | |
83 | 199 |
d->config[0x0a] = 0x00; // class_sub = host2pci |
84 | 200 |
d->config[0x0b] = 0x06; // class_base = PCI_bridge |
85 | 201 |
d->config[0x0e] = 0x00; // header_type |
202 |
|
|
203 |
d->config[0x6c] = 0x0a; /* SMRAM */ |
|
204 |
|
|
205 |
register_savevm("I440FX", 0, 1, i440fx_save, i440fx_load, d); |
|
206 |
*pi440fx_state = d; |
|
86 | 207 |
return b; |
87 | 208 |
} |
88 | 209 |
|
... | ... | |
188 | 309 |
piix3_reset(d); |
189 | 310 |
return d->devfn; |
190 | 311 |
} |
191 |
|
|
192 |
/***********************************************************/ |
|
193 |
/* XXX: the following should be moved to the PC BIOS */ |
|
194 |
|
|
195 |
static __attribute__((unused)) uint32_t isa_inb(uint32_t addr) |
|
196 |
{ |
|
197 |
return cpu_inb(NULL, addr); |
|
198 |
} |
|
199 |
|
|
200 |
static void isa_outb(uint32_t val, uint32_t addr) |
|
201 |
{ |
|
202 |
cpu_outb(NULL, addr, val); |
|
203 |
} |
|
204 |
|
|
205 |
static __attribute__((unused)) uint32_t isa_inw(uint32_t addr) |
|
206 |
{ |
|
207 |
return cpu_inw(NULL, addr); |
|
208 |
} |
|
209 |
|
|
210 |
static __attribute__((unused)) void isa_outw(uint32_t val, uint32_t addr) |
|
211 |
{ |
|
212 |
cpu_outw(NULL, addr, val); |
|
213 |
} |
|
214 |
|
|
215 |
static __attribute__((unused)) uint32_t isa_inl(uint32_t addr) |
|
216 |
{ |
|
217 |
return cpu_inl(NULL, addr); |
|
218 |
} |
|
219 |
|
|
220 |
static __attribute__((unused)) void isa_outl(uint32_t val, uint32_t addr) |
|
221 |
{ |
|
222 |
cpu_outl(NULL, addr, val); |
|
223 |
} |
|
224 |
|
|
225 |
static uint32_t pci_bios_io_addr; |
|
226 |
static uint32_t pci_bios_mem_addr; |
|
227 |
/* host irqs corresponding to PCI irqs A-D */ |
|
228 |
static uint8_t pci_irqs[4] = { 11, 9, 11, 9 }; |
|
229 |
static int pci_bios_next_bus; |
|
230 |
|
|
231 |
static void pci_config_writel(PCIDevice *d, uint32_t addr, uint32_t val) |
|
232 |
{ |
|
233 |
PCIBus *s = d->bus; |
|
234 |
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8); |
|
235 |
pci_data_write(s, addr, val, 4); |
|
236 |
} |
|
237 |
|
|
238 |
static void pci_config_writew(PCIDevice *d, uint32_t addr, uint32_t val) |
|
239 |
{ |
|
240 |
PCIBus *s = d->bus; |
|
241 |
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8); |
|
242 |
pci_data_write(s, addr, val, 2); |
|
243 |
} |
|
244 |
|
|
245 |
static void pci_config_writeb(PCIDevice *d, uint32_t addr, uint32_t val) |
|
246 |
{ |
|
247 |
PCIBus *s = d->bus; |
|
248 |
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8); |
|
249 |
pci_data_write(s, addr, val, 1); |
|
250 |
} |
|
251 |
|
|
252 |
static __attribute__((unused)) uint32_t pci_config_readl(PCIDevice *d, uint32_t addr) |
|
253 |
{ |
|
254 |
PCIBus *s = d->bus; |
|
255 |
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8); |
|
256 |
return pci_data_read(s, addr, 4); |
|
257 |
} |
|
258 |
|
|
259 |
static uint32_t pci_config_readw(PCIDevice *d, uint32_t addr) |
|
260 |
{ |
|
261 |
PCIBus *s = d->bus; |
|
262 |
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8); |
|
263 |
return pci_data_read(s, addr, 2); |
|
264 |
} |
|
265 |
|
|
266 |
static uint32_t pci_config_readb(PCIDevice *d, uint32_t addr) |
|
267 |
{ |
|
268 |
PCIBus *s = d->bus; |
|
269 |
addr |= (pci_bus_num(s) << 16) | (d->devfn << 8); |
|
270 |
return pci_data_read(s, addr, 1); |
|
271 |
} |
|
272 |
|
|
273 |
static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr) |
|
274 |
{ |
|
275 |
PCIIORegion *r; |
|
276 |
uint16_t cmd; |
|
277 |
uint32_t ofs; |
|
278 |
|
|
279 |
if ( region_num == PCI_ROM_SLOT ) { |
|
280 |
ofs = 0x30; |
|
281 |
}else{ |
|
282 |
ofs = 0x10 + region_num * 4; |
|
283 |
} |
|
284 |
|
|
285 |
pci_config_writel(d, ofs, addr); |
|
286 |
r = &d->io_regions[region_num]; |
|
287 |
|
|
288 |
/* enable memory mappings */ |
|
289 |
cmd = pci_config_readw(d, PCI_COMMAND); |
|
290 |
if ( region_num == PCI_ROM_SLOT ) |
|
291 |
cmd |= 2; |
|
292 |
else if (r->type & PCI_ADDRESS_SPACE_IO) |
|
293 |
cmd |= 1; |
|
294 |
else |
|
295 |
cmd |= 2; |
|
296 |
pci_config_writew(d, PCI_COMMAND, cmd); |
|
297 |
} |
|
298 |
|
|
299 |
static void pci_bios_init_device(PCIDevice *d) |
|
300 |
{ |
|
301 |
int class; |
|
302 |
PCIIORegion *r; |
|
303 |
uint32_t *paddr; |
|
304 |
int i, pin, pic_irq, vendor_id, device_id; |
|
305 |
|
|
306 |
class = pci_config_readw(d, PCI_CLASS_DEVICE); |
|
307 |
vendor_id = pci_config_readw(d, PCI_VENDOR_ID); |
|
308 |
device_id = pci_config_readw(d, PCI_DEVICE_ID); |
|
309 |
switch(class) { |
|
310 |
case 0x0101: |
|
311 |
if (vendor_id == 0x8086 && device_id == 0x7010) { |
|
312 |
/* PIIX3 IDE */ |
|
313 |
pci_config_writew(d, 0x40, 0x8000); // enable IDE0 |
|
314 |
pci_config_writew(d, 0x42, 0x8000); // enable IDE1 |
|
315 |
goto default_map; |
|
316 |
} else { |
|
317 |
/* IDE: we map it as in ISA mode */ |
|
318 |
pci_set_io_region_addr(d, 0, 0x1f0); |
|
319 |
pci_set_io_region_addr(d, 1, 0x3f4); |
|
320 |
pci_set_io_region_addr(d, 2, 0x170); |
|
321 |
pci_set_io_region_addr(d, 3, 0x374); |
|
322 |
} |
|
323 |
break; |
|
324 |
case 0x0604: |
|
325 |
/* PCI to PCI bridge. Assign bus ID and recurse to configure |
|
326 |
devices on the secondary bus. */ |
|
327 |
i = pci_bios_next_bus++; |
|
328 |
pci_config_writeb(d, 0x18, pci_bus_num(d->bus)); |
|
329 |
pci_config_writeb(d, 0x19, i); |
|
330 |
pci_for_each_device(i, pci_bios_init_device); |
|
331 |
break; |
|
332 |
case 0x0300: |
|
333 |
if (vendor_id != 0x1234) |
|
334 |
goto default_map; |
|
335 |
/* VGA: map frame buffer to default Bochs VBE address */ |
|
336 |
pci_set_io_region_addr(d, 0, 0xE0000000); |
|
337 |
break; |
|
338 |
case 0x0800: |
|
339 |
/* PIC */ |
|
340 |
vendor_id = pci_config_readw(d, PCI_VENDOR_ID); |
|
341 |
device_id = pci_config_readw(d, PCI_DEVICE_ID); |
|
342 |
if (vendor_id == 0x1014) { |
|
343 |
/* IBM */ |
|
344 |
if (device_id == 0x0046 || device_id == 0xFFFF) { |
|
345 |
/* MPIC & MPIC2 */ |
|
346 |
pci_set_io_region_addr(d, 0, 0x80800000 + 0x00040000); |
|
347 |
} |
|
348 |
} |
|
349 |
break; |
|
350 |
case 0xff00: |
|
351 |
if (vendor_id == 0x0106b && |
|
352 |
(device_id == 0x0017 || device_id == 0x0022)) { |
|
353 |
/* macio bridge */ |
|
354 |
pci_set_io_region_addr(d, 0, 0x80800000); |
|
355 |
} |
|
356 |
break; |
|
357 |
default: |
|
358 |
default_map: |
|
359 |
/* default memory mappings */ |
|
360 |
for(i = 0; i < PCI_NUM_REGIONS; i++) { |
|
361 |
r = &d->io_regions[i]; |
|
362 |
if (r->size) { |
|
363 |
if (r->type & PCI_ADDRESS_SPACE_IO) |
|
364 |
paddr = &pci_bios_io_addr; |
|
365 |
else |
|
366 |
paddr = &pci_bios_mem_addr; |
|
367 |
*paddr = (*paddr + r->size - 1) & ~(r->size - 1); |
|
368 |
pci_set_io_region_addr(d, i, *paddr); |
|
369 |
*paddr += r->size; |
|
370 |
} |
|
371 |
} |
|
372 |
break; |
|
373 |
} |
|
374 |
|
|
375 |
/* map the interrupt */ |
|
376 |
pin = pci_config_readb(d, PCI_INTERRUPT_PIN); |
|
377 |
if (pin != 0) { |
|
378 |
pin = pci_slot_get_pirq(d, pin - 1); |
|
379 |
pic_irq = pci_irqs[pin]; |
|
380 |
pci_config_writeb(d, PCI_INTERRUPT_LINE, pic_irq); |
|
381 |
} |
|
382 |
} |
|
383 |
|
|
384 |
/* |
|
385 |
* This function initializes the PCI devices as a normal PCI BIOS |
|
386 |
* would do. It is provided just in case the BIOS has no support for |
|
387 |
* PCI. |
|
388 |
*/ |
|
389 |
void pci_bios_init(void) |
|
390 |
{ |
|
391 |
int i, irq; |
|
392 |
uint8_t elcr[2]; |
|
393 |
|
|
394 |
pci_bios_io_addr = 0xc000; |
|
395 |
pci_bios_mem_addr = 0xf0000000; |
|
396 |
|
|
397 |
/* activate IRQ mappings */ |
|
398 |
elcr[0] = 0x00; |
|
399 |
elcr[1] = 0x00; |
|
400 |
for(i = 0; i < 4; i++) { |
|
401 |
irq = pci_irqs[i]; |
|
402 |
/* set to trigger level */ |
|
403 |
elcr[irq >> 3] |= (1 << (irq & 7)); |
|
404 |
/* activate irq remapping in PIIX */ |
|
405 |
pci_config_writeb(piix3_dev, 0x60 + i, irq); |
|
406 |
} |
|
407 |
isa_outb(elcr[0], 0x4d0); |
|
408 |
isa_outb(elcr[1], 0x4d1); |
|
409 |
|
|
410 |
pci_bios_next_bus = 1; |
|
411 |
pci_for_each_device(0, pci_bios_init_device); |
|
412 |
} |
|
413 |
|
Also available in: Unified diff