Archipelago » qemu

/*

 * VT82C686B south bridge support

 *

 * Copyright (c) 2008 yajin (yajin@vm-kernel.org)

 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)

 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)

 * This code is licensed under the GNU GPL v2.

 *

 * Contributions after 2012-01-13 are licensed under the terms of the

 * GNU GPL, version 2 or (at your option) any later version.

 */

#include "hw/hw.h"

#include "hw/i386/pc.h"

#include "hw/isa/vt82c686.h"

#include "hw/i2c/i2c.h"

#include "hw/i2c/smbus.h"

#include "hw/pci/pci.h"

#include "hw/isa/isa.h"

#include "hw/sysbus.h"

#include "hw/mips/mips.h"

#include "hw/isa/apm.h"

#include "hw/acpi/acpi.h"

#include "hw/i2c/pm_smbus.h"

#include "sysemu/sysemu.h"

#include "qemu/timer.h"

#include "exec/address-spaces.h"

//#define DEBUG_VT82C686B

#ifdef DEBUG_VT82C686B

#define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)

#else

#define DPRINTF(fmt, ...)

#endif

typedef struct SuperIOConfig

{

    uint8_t config[0xff];

    uint8_t index;

    uint8_t data;

} SuperIOConfig;

typedef struct VT82C686BState {

    PCIDevice dev;

    MemoryRegion superio;

    SuperIOConfig superio_conf;

} VT82C686BState;

static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,

                                  unsigned size)

{

    int can_write;

    SuperIOConfig *superio_conf = opaque;

    DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);

    if (addr == 0x3f0) {

        superio_conf->index = data & 0xff;

    } else {

        /* 0x3f1 */

        switch (superio_conf->index) {

        case 0x00 ... 0xdf:

        case 0xe4:

        case 0xe5:

        case 0xe9 ... 0xed:

        case 0xf3:

        case 0xf5:

        case 0xf7:

        case 0xf9 ... 0xfb:

        case 0xfd ... 0xff:

            can_write = 0;

            break;

        default:

            can_write = 1;

            if (can_write) {

                switch (superio_conf->index) {

                case 0xe7:

                    if ((data & 0xff) != 0xfe) {

                        DPRINTF("chage uart 1 base. unsupported yet\n");

                    }

                    break;

                case 0xe8:

                    if ((data & 0xff) != 0xbe) {

                        DPRINTF("chage uart 2 base. unsupported yet\n");

                    }

                    break;

                default:

                    superio_conf->config[superio_conf->index] = data & 0xff;

                }

            }

        }

        superio_conf->config[superio_conf->index] = data & 0xff;

    }

}

static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)

{

    SuperIOConfig *superio_conf = opaque;

    DPRINTF("superio_ioport_readb  address 0x%x\n", addr);

    return (superio_conf->config[superio_conf->index]);

}

static const MemoryRegionOps superio_ops = {

    .read = superio_ioport_readb,

    .write = superio_ioport_writeb,

    .endianness = DEVICE_NATIVE_ENDIAN,

    .impl = {

        .min_access_size = 1,

        .max_access_size = 1,

    },

};

static void vt82c686b_reset(void * opaque)

{

    PCIDevice *d = opaque;

    uint8_t *pci_conf = d->config;

    VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);

    pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);

    pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |

                 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);

    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);

    pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */

    pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */

    pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */

    pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */

    pci_conf[0x59] = 0x04;

    pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/

    pci_conf[0x5f] = 0x04;

    pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */

    vt82c->superio_conf.config[0xe0] = 0x3c;

    vt82c->superio_conf.config[0xe2] = 0x03;

    vt82c->superio_conf.config[0xe3] = 0xfc;

    vt82c->superio_conf.config[0xe6] = 0xde;

    vt82c->superio_conf.config[0xe7] = 0xfe;

    vt82c->superio_conf.config[0xe8] = 0xbe;

}

/* write config pci function0 registers. PCI-ISA bridge */

static void vt82c686b_write_config(PCIDevice * d, uint32_t address,

                                   uint32_t val, int len)

{

    VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d);

    DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",

           address, val, len);

    pci_default_write_config(d, address, val, len);

    if (address == 0x85) {  /* enable or disable super IO configure */

        memory_region_set_enabled(&vt686->superio, val & 0x2);

    }

}

#define ACPI_DBG_IO_ADDR  0xb044

typedef struct VT686PMState {

    PCIDevice dev;

    MemoryRegion io;

    ACPIREGS ar;

    APMState apm;

    PMSMBus smb;

    uint32_t smb_io_base;

} VT686PMState;

typedef struct VT686AC97State {

    PCIDevice dev;

} VT686AC97State;

typedef struct VT686MC97State {

    PCIDevice dev;

} VT686MC97State;

static void pm_update_sci(VT686PMState *s)

{

    int sci_level, pmsts;

    pmsts = acpi_pm1_evt_get_sts(&s->ar);

    sci_level = (((pmsts & s->ar.pm1.evt.en) &

                  (ACPI_BITMASK_RT_CLOCK_ENABLE |

                   ACPI_BITMASK_POWER_BUTTON_ENABLE |

                   ACPI_BITMASK_GLOBAL_LOCK_ENABLE |

                   ACPI_BITMASK_TIMER_ENABLE)) != 0);

    pci_set_irq(&s->dev, sci_level);

    /* schedule a timer interruption if needed */

    acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&

                       !(pmsts & ACPI_BITMASK_TIMER_STATUS));

}

static void pm_tmr_timer(ACPIREGS *ar)

{

    VT686PMState *s = container_of(ar, VT686PMState, ar);

    pm_update_sci(s);

}

static void pm_io_space_update(VT686PMState *s)

{

    uint32_t pm_io_base;

    pm_io_base = pci_get_long(s->dev.config + 0x40);

    pm_io_base &= 0xffc0;

    memory_region_transaction_begin();

    memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);

    memory_region_set_address(&s->io, pm_io_base);

    memory_region_transaction_commit();

}

static void pm_write_config(PCIDevice *d,

                            uint32_t address, uint32_t val, int len)

{

    DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",

           address, val, len);

    pci_default_write_config(d, address, val, len);

}

static int vmstate_acpi_post_load(void *opaque, int version_id)

{

    VT686PMState *s = opaque;

    pm_io_space_update(s);

    return 0;

}

static const VMStateDescription vmstate_acpi = {

    .name = "vt82c686b_pm",

    .version_id = 1,

    .minimum_version_id = 1,

    .minimum_version_id_old = 1,

    .post_load = vmstate_acpi_post_load,

    .fields      = (VMStateField []) {

        VMSTATE_PCI_DEVICE(dev, VT686PMState),

        VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),

        VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),

        VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),

        VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),

        VMSTATE_TIMER(ar.tmr.timer, VT686PMState),

        VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),

        VMSTATE_END_OF_LIST()

    }

};

/*

 * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()

 * just register a PCI device now, functionalities will be implemented later.

 */

static int vt82c686b_ac97_initfn(PCIDevice *dev)

{

    VT686AC97State *s = DO_UPCAST(VT686AC97State, dev, dev);

    uint8_t *pci_conf = s->dev.config;

    pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |

                 PCI_COMMAND_PARITY);

    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |

                 PCI_STATUS_DEVSEL_MEDIUM);

    pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);

    return 0;

}

void vt82c686b_ac97_init(PCIBus *bus, int devfn)

{

    PCIDevice *dev;

    dev = pci_create(bus, devfn, "VT82C686B_AC97");

    qdev_init_nofail(&dev->qdev);

}

static void via_ac97_class_init(ObjectClass *klass, void *data)

{

    DeviceClass *dc = DEVICE_CLASS(klass);

    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->init = vt82c686b_ac97_initfn;

    k->vendor_id = PCI_VENDOR_ID_VIA;

    k->device_id = PCI_DEVICE_ID_VIA_AC97;

    k->revision = 0x50;

    k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;

    set_bit(DEVICE_CATEGORY_SOUND, dc->categories);

    dc->desc = "AC97";

}

static const TypeInfo via_ac97_info = {

    .name          = "VT82C686B_AC97",

    .parent        = TYPE_PCI_DEVICE,

    .instance_size = sizeof(VT686AC97State),

    .class_init    = via_ac97_class_init,

};

static int vt82c686b_mc97_initfn(PCIDevice *dev)

{

    VT686MC97State *s = DO_UPCAST(VT686MC97State, dev, dev);

    uint8_t *pci_conf = s->dev.config;

    pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |

                 PCI_COMMAND_VGA_PALETTE);

    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);

    pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);

    return 0;

}

void vt82c686b_mc97_init(PCIBus *bus, int devfn)

{

    PCIDevice *dev;

    dev = pci_create(bus, devfn, "VT82C686B_MC97");

    qdev_init_nofail(&dev->qdev);

}

static void via_mc97_class_init(ObjectClass *klass, void *data)

{

    DeviceClass *dc = DEVICE_CLASS(klass);

    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->init = vt82c686b_mc97_initfn;

    k->vendor_id = PCI_VENDOR_ID_VIA;

    k->device_id = PCI_DEVICE_ID_VIA_MC97;

    k->class_id = PCI_CLASS_COMMUNICATION_OTHER;

    k->revision = 0x30;

    set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);

    dc->desc = "MC97";

}

static const TypeInfo via_mc97_info = {

    .name          = "VT82C686B_MC97",

    .parent        = TYPE_PCI_DEVICE,

    .instance_size = sizeof(VT686MC97State),

    .class_init    = via_mc97_class_init,

};

/* vt82c686 pm init */

static int vt82c686b_pm_initfn(PCIDevice *dev)

{

    VT686PMState *s = DO_UPCAST(VT686PMState, dev, dev);

    uint8_t *pci_conf;

    pci_conf = s->dev.config;

    pci_set_word(pci_conf + PCI_COMMAND, 0);

    pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |

                 PCI_STATUS_DEVSEL_MEDIUM);

    /* 0x48-0x4B is Power Management I/O Base */

    pci_set_long(pci_conf + 0x48, 0x00000001);

    /* SMB ports:0xeee0~0xeeef */

    s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0);

    pci_conf[0x90] = s->smb_io_base | 1;

    pci_conf[0x91] = s->smb_io_base >> 8;

    pci_conf[0xd2] = 0x90;

    pm_smbus_init(&s->dev.qdev, &s->smb);

    memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);

    apm_init(dev, &s->apm, NULL, s);

    memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);

    memory_region_set_enabled(&s->io, false);

    memory_region_add_subregion(get_system_io(), 0, &s->io);

    acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);

    acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);

    acpi_pm1_cnt_init(&s->ar, &s->io, 2);

    return 0;

}

i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,

                       qemu_irq sci_irq)

{

    PCIDevice *dev;

    VT686PMState *s;

    dev = pci_create(bus, devfn, "VT82C686B_PM");

    qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);

    s = DO_UPCAST(VT686PMState, dev, dev);

    qdev_init_nofail(&dev->qdev);

    return s->smb.smbus;

}

static Property via_pm_properties[] = {

    DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),

    DEFINE_PROP_END_OF_LIST(),

};

static void via_pm_class_init(ObjectClass *klass, void *data)

{

    DeviceClass *dc = DEVICE_CLASS(klass);

    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->init = vt82c686b_pm_initfn;

    k->config_write = pm_write_config;

    k->vendor_id = PCI_VENDOR_ID_VIA;

    k->device_id = PCI_DEVICE_ID_VIA_ACPI;

    k->class_id = PCI_CLASS_BRIDGE_OTHER;

    k->revision = 0x40;

    dc->desc = "PM";

    dc->vmsd = &vmstate_acpi;

    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);

    dc->props = via_pm_properties;

}

static const TypeInfo via_pm_info = {

    .name          = "VT82C686B_PM",

    .parent        = TYPE_PCI_DEVICE,

    .instance_size = sizeof(VT686PMState),

    .class_init    = via_pm_class_init,

};

static const VMStateDescription vmstate_via = {

    .name = "vt82c686b",

    .version_id = 1,

    .minimum_version_id = 1,

    .minimum_version_id_old = 1,

    .fields      = (VMStateField []) {

        VMSTATE_PCI_DEVICE(dev, VT82C686BState),

        VMSTATE_END_OF_LIST()

    }

};

/* init the PCI-to-ISA bridge */

static int vt82c686b_initfn(PCIDevice *d)

{

    VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);

    uint8_t *pci_conf;

    ISABus *isa_bus;

    uint8_t *wmask;

    int i;

    isa_bus = isa_bus_new(&d->qdev, pci_address_space_io(d));

    pci_conf = d->config;

    pci_config_set_prog_interface(pci_conf, 0x0);

    wmask = d->wmask;

    for (i = 0x00; i < 0xff; i++) {

       if (i<=0x03 || (i>=0x08 && i<=0x3f)) {

           wmask[i] = 0x00;

       }

    }

    memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,

                          &vt82c->superio_conf, "superio", 2);

    memory_region_set_enabled(&vt82c->superio, false);

    /* The floppy also uses 0x3f0 and 0x3f1.

     * But we do not emulate a floppy, so just set it here. */

    memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,

                                &vt82c->superio);

    qemu_register_reset(vt82c686b_reset, d);

    return 0;

}

ISABus *vt82c686b_init(PCIBus *bus, int devfn)

{

    PCIDevice *d;

    d = pci_create_simple_multifunction(bus, devfn, true, "VT82C686B");

    return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));

}

static void via_class_init(ObjectClass *klass, void *data)

{

    DeviceClass *dc = DEVICE_CLASS(klass);

    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);

    k->init = vt82c686b_initfn;

    k->config_write = vt82c686b_write_config;

    k->vendor_id = PCI_VENDOR_ID_VIA;

    k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;

    k->class_id = PCI_CLASS_BRIDGE_ISA;

    k->revision = 0x40;

    dc->desc = "ISA bridge";

    dc->cannot_instantiate_with_device_add_yet = true; /* FIXME explain why */

    dc->vmsd = &vmstate_via;

}

static const TypeInfo via_info = {

    .name          = "VT82C686B",

    .parent        = TYPE_PCI_DEVICE,

    .instance_size = sizeof(VT82C686BState),

    .class_init    = via_class_init,

};

static void vt82c686b_register_types(void)

{

    type_register_static(&via_ac97_info);

    type_register_static(&via_mc97_info);

    type_register_static(&via_pm_info);

    type_register_static(&via_info);

}

type_init(vt82c686b_register_types)