1 ========================
2 Support for Open vSwitch
3 ========================
5 .. contents:: :depth: 3
7 This is a design document detailing the implementation of support for
8 Open vSwitch in the Ganeti tool chain.
10 Current state and shortcomings
11 ==============================
13 At the moment Ganeti's support for Open vSwitch is very basic and
14 limited to connecting instances to an existing vSwitch.
16 The shortcomings of this approach are:
18 1. The full functionality (VLANs, QoS and trunking) of Open vSwitch is not used.
20 2. Open vSwitch cannot be managed centrally.
24 1. Implement functions into gnt-network to manage Open vSwitch through Ganeti gnt-network
25 should be able to create, modify and delete vSwitches. The resulting configuration shall
26 automatically be done on all members of the node group. Connecting Ethernet devices to
27 vSwitches should be managed through this interface as well.
29 2. Implement VLAN-capabilities: Instances shall have additional information for every NIC: VLAN-ID
30 and port type. These are used to determine their type of connection to Open vSwitch. This will
31 require modifying the methods for instance creation and modification
33 3. Implement NIC bonding: Functions to bond NICs for performance improvement, load-balancing and
34 failover should be added. It is preferable to have a configuration option to determine the
35 type of the trunk, as there are different types of trunks (LACP dynamic and static, different
36 failover and load-balancing mechanisms)
38 4. Set QoS level on per instance basis: Instances shall have an additional information: maximum
39 bandwidth and maximum burst. This helps to balance the bandwidth needs between the VMs and to
40 ensure fair sharing of the bandwidth.
42 Configuration changes for VLANs
43 +++++++++++++++++++++++++++++++
44 nicparams shall be extended by a value "vlan" that will store the VLAN information for each NIC.
45 This parameter will only be used if nicparams[constants.NIC_MODE] == constants.NIC_MODE_OVS,
46 since it doesn't make sense in other modes.
48 Each VLAN the NIC belongs to shall be stored in this single value. The format of storing this information
49 is the same as the one which is used in Xen 4.3, since Xen 4.3 comes with functionality to support
52 This parameter will, at first, only be implemented for Xen and will have no effects on other hypervisors.
53 Support for KVM will be added in the future.
56 switch1 will connect the VM to the default VLAN of the switch1.
57 switch1.3 means that the VM is connected to an access port of VLAN 3.
58 switch1.2:10:20 means that the VM is connected to a hybrid port on switch1, carrying VLANs 2 untagged and
59 VLANs 10 and 20 tagged.
60 switch1:44:55 means that the VM is connected to a trunk port on switch1, carrying VLANS 44 and 55
62 This configuration string is split at the dot or colon respectively and stored in nicparams[constants.NIC_LINK]
63 and nicparams[constants.NIC_VLAN] respectively. Dot or colon are stored as well in nicparams[constants.NIC_VLAN].
65 For Xen hypervisors, this information can be concatenated again and stored in the vif config as
66 the bridge parameter and will be fully compatible with vif-openvswitch as of Xen 4.3.
68 Users of older Xen versions should be able to grab vif-openvswitch from the Xen repo and use it
71 gnt-instance modify shall be able to add or remove single VLANs from the vlan string without users needing
72 to specify the complete new string.
74 Configuration changes for QoS
75 +++++++++++++++++++++++++++++
76 Instances shall be extended with configuration options for
81 New configuration objects need to be created for the Open vSwitch configuration.
83 All these configuration changes need to be made available on the whole node group.
85 .. vim: set textwidth=72 :