+News
+====
+
Version 2.0.3
- - Added “--ignore-size” to the “gnt-instance activate-disks” command
- to allow using the pre-2.0.2 behaviour in activation, if any
- existing instances have mismatched disk sizes in the configuration
- - Added “gnt-cluster repair-disk-sizes” command to check and update
- any configuration mismatches for disk sizes
- - Added “gnt-master cluste-failover --no-voting” to allow master
- failover to work on two-node clusters
- - Fixed the ‘--net’ option of “gnt-backup import”, which was unusable
- - Fixed detection of OS script errors in “gnt-backup export”
- - Fixed exit code of “gnt-backup export”
+-------------
+
+- Added ``--ignore-size`` to the ``gnt-instance activate-disks`` command
+ to allow using the pre-2.0.2 behaviour in activation, if any existing
+ instances have mismatched disk sizes in the configuration
+- Added ``gnt-cluster repair-disk-sizes`` command to check and update any
+ configuration mismatches for disk sizes
+- Added ``gnt-master cluste-failover --no-voting`` to allow master
+ failover to work on two-node clusters
+- Fixed the ‘--net’ option of ``gnt-backup import``, which was unusable
+- Fixed detection of OS script errors in ``gnt-backup export``
+- Fixed exit code of ``gnt-backup export``
+
Version 2.0.2
- - Added experimental support for stripped logical volumes; this should
- enhance performance but comes with a higher complexity in the block
- device handling; stripping is only enabled when passing
- --with-lvm-stripecount=N to configure, but codepaths are affected
- even in the non-stripped mode
- - Improved resiliency against transient failures at the end of DRBD
- resyncs, and in general of DRBD resync checks
- - Fixed a couple of issues with exports and snapshot errors
- - Fixed a couple of issues in instance listing
- - Added display of the disk size in “gnt-instance info”
- - Fixed checking for valid OSes in instance creation
- - Fixed handling of the ‘vcpus’ parameter in instance listing and in
- general of invalid parameters
- - Fixed http server library, and thus RAPI, to handle invalid
- username/password combinations correctly; this means that now they
- report unauthorized for queries too, not only for modifications,
- allowing earlier detect of configuration problems
- - Added a new ‘role’ node list field, equivalent to the master/master
- candidate/drained/offline flags combinations
- - Fixed cluster modify and changes of candidate pool size
- - Fixed cluster verify error messages for wrong files on regular nodes
- - Fixed a couple of issues with node demotion from master candidate
- role
- - Fixed node readd issues
- - Added non-interactive mode for “ganeti-masterd --no-voting” startup
- - Added a new ‘--no-voting’ option for masterfailover to fix failover
- on two-nodes clusters when the former master node is unreachable
- - Added instance reinstall over RAPI
+-------------
+
+- Added experimental support for stripped logical volumes; this should
+ enhance performance but comes with a higher complexity in the block
+ device handling; stripping is only enabled when passing
+ ``--with-lvm-stripecount=N`` to ``configure``, but codepaths are
+ affected even in the non-stripped mode
+- Improved resiliency against transient failures at the end of DRBD
+ resyncs, and in general of DRBD resync checks
+- Fixed a couple of issues with exports and snapshot errors
+- Fixed a couple of issues in instance listing
+- Added display of the disk size in ``gnt-instance info``
+- Fixed checking for valid OSes in instance creation
+- Fixed handling of the ‘vcpus’ parameter in instance listing and in
+ general of invalid parameters
+- Fixed http server library, and thus RAPI, to handle invalid
+ username/password combinations correctly; this means that now they
+ report unauthorized for queries too, not only for modifications,
+ allowing earlier detect of configuration problems
+- Added a new ‘role’ node list field, equivalent to the master/master
+ candidate/drained/offline flags combinations
+- Fixed cluster modify and changes of candidate pool size
+- Fixed cluster verify error messages for wrong files on regular nodes
+- Fixed a couple of issues with node demotion from master candidate role
+- Fixed node readd issues
+- Added non-interactive mode for ``ganeti-masterd --no-voting`` startup
+- Added a new ‘--no-voting’ option for masterfailover to fix failover on
+ two-nodes clusters when the former master node is unreachable
+- Added instance reinstall over RAPI
+
Version 2.0.1
- - added -H/-B startup parameters to gnt-instance, which will allow
- re-adding the start in single-user option (regression from 1.2)
- - the watcher writes the instance status to a file, to allow
- monitoring to report the instance status (from the master) based on
- cached results of the watcher's queries; while this can get stale if
- the watcher is being locked due to other work on the cluster, this
- is still an improvement
- - the watcher now also restarts the node daemon and the rapi daemon if
- they died
- - fixed the watcher to handle full and drained queue cases
- - hooks export more instance data in the environment, which helps if
- hook scripts need to take action based on the instance's properties
- (no longer need to query back into ganeti)
- - instance failovers when the instance is stopped do not check for
- free RAM, so that failing over a stopped instance is possible in low
- memory situations
- - rapi uses queries for tags instead of jobs (for less job traffic),
- and for cluster tags it won't talk to masterd at all but read them
- from ssconf
- - a couple of error handling fixes in RAPI
- - drbd handling: improved the error handling of inconsistent disks
- after resync to reduce the frequency of "there are some degraded
- disks for this instance" message
- - fixed a bug in live migration when DRBD doesn't want to reconnect
- (the error handling path called a wrong function name)
+-------------
+
+- added ``-H``/``-B`` startup parameters to ``gnt-instance``, which will
+ allow re-adding the start in single-user option (regression from 1.2)
+- the watcher writes the instance status to a file, to allow monitoring
+ to report the instance status (from the master) based on cached
+ results of the watcher's queries; while this can get stale if the
+ watcher is being locked due to other work on the cluster, this is
+ still an improvement
+- the watcher now also restarts the node daemon and the rapi daemon if
+ they died
+- fixed the watcher to handle full and drained queue cases
+- hooks export more instance data in the environment, which helps if hook
+ scripts need to take action based on the instance's properties (no
+ longer need to query back into ganeti)
+- instance failovers when the instance is stopped do not check for free
+ RAM, so that failing over a stopped instance is possible in low memory
+ situations
+- rapi uses queries for tags instead of jobs (for less job traffic), and
+ for cluster tags it won't talk to masterd at all but read them from
+ ssconf
+- a couple of error handling fixes in RAPI
+- drbd handling: improved the error handling of inconsistent disks after
+ resync to reduce the frequency of "there are some degraded disks for
+ this instance" messages
+- fixed a bug in live migration when DRBD doesn't want to reconnect (the
+ error handling path called a wrong function name)
+
Version 2.0.0 final
- - no changes from rc5
+-------------------
+
+- no changes from rc5
+
Version 2.0 release candidate 5
- - fix a couple of bugs (validation, argument checks)
- - fix gnt-cluster getmaster on non-master nodes (regression)
- - some small improvements to RAPI and IAllocator
- - make watcher automatically start the master daemon if down
+-------------------------------
+
+- fix a couple of bugs (validation, argument checks)
+- fix ``gnt-cluster getmaster`` on non-master nodes (regression)
+- some small improvements to RAPI and IAllocator
+- make watcher automatically start the master daemon if down
+
Version 2.0 release candidate 4
- - change the OS list to not require locks; this helps with big
- clusters
- - fix gnt-cluster verify and gnt-cluster verify-disks when the volume
- group is broken
- - “gnt-instance info”, without any arguments, doesn't run for all
- instances anymore; either pass ‘--all’ or pass the desired
- instances; this helps against mistakes on big clusters where listing
- the information for all instances takes a long time
- - miscellaneous doc and man pages fixes
+-------------------------------
+
+- change the OS list to not require locks; this helps with big clusters
+- fix ``gnt-cluster verify`` and ``gnt-cluster verify-disks`` when the
+ volume group is broken
+- ``gnt-instance info``, without any arguments, doesn't run for all
+ instances anymore; either pass ``--all`` or pass the desired
+ instances; this helps against mistakes on big clusters where listing
+ the information for all instances takes a long time
+- miscellaneous doc and man pages fixes
+
Version 2.0 release candidate 3
- - Change the internal locking model of some gnt-node commands, in
- order to reduce contention (and blocking of master daemon) when
- batching many creation/reinstall jobs
- - Fixes to Xen soft reboot
- - No longer build documentation at 'make' time, instead distribute it
- in the archive, in order to reduce the need for the whole
- docbook/rst toolchains
+-------------------------------
+
+- Change the internal locking model of some ``gnt-node`` commands, in
+ order to reduce contention (and blocking of master daemon) when
+ batching many creation/reinstall jobs
+- Fixes to Xen soft reboot
+- No longer build documentation at build time, instead distribute it in
+ the archive, in order to reduce the need for the whole docbook/rst
+ toolchains
+
Version 2.0 release candidate 2
- - Now the cfgupgrade scripts works and can upgrade 1.2.7 clusters to
- 2.0
- - Fix watcher startup sequence, improves the behaviour of busy
- clusters
- - Some other fixes in cluster verify, replace-disks, gnt-instance add,
- gnt-cluster queue, KVM VNC bind address and other places
- - Some documentation fixes and updates
+-------------------------------
+
+- Now the cfgupgrade scripts works and can upgrade 1.2.7 clusters to 2.0
+- Fix watcher startup sequence, improves the behaviour of busy clusters
+- Some other fixes in ``gnt-cluster verify``, ``gnt-instance
+ replace-disks``, ``gnt-instance add``, ``gnt-cluster queue``, KVM VNC
+ bind address and other places
+- Some documentation fixes and updates
+
Version 2.0 release candidate 1
- - More documentation updates, now all docs should be more-or-less
- up-to-date
- - A couple of small fixes (mixed hypervisor clusters, offline nodes,
- etc.)
- - Added a customizable HV_KERNEL_ARGS hypervisor parameter (for Xen
- PVM and KVM)
- - Fix an issue related to $libdir/run/ganeti and cluster creation
+-------------------------------
+
+- More documentation updates, now all docs should be more-or-less
+ up-to-date
+- A couple of small fixes (mixed hypervisor clusters, offline nodes,
+ etc.)
+- Added a customizable HV_KERNEL_ARGS hypervisor parameter (for Xen PVM
+ and KVM)
+- Fix an issue related to $libdir/run/ganeti and cluster creation
+
Version 2.0 beta 2
- - Xen PVM and KVM have switched the default value for the instance
- root disk to the first partition on the first drive, instead of the
- whole drive; this means that the OS installation scripts must be
- changed accordingly
- - Man pages have been updated
- - RAPI has been switched by default to HTTPS, and the exported
- functions should all work correctly
- - RAPI v1 has been removed
- - Many improvements to the KVM hypervisor
- - Block device errors are now better reported
- - Many other bugfixes and small improvements
+------------------
+
+- Xen PVM and KVM have switched the default value for the instance root
+ disk to the first partition on the first drive, instead of the whole
+ drive; this means that the OS installation scripts must be changed
+ accordingly
+- Man pages have been updated
+- RAPI has been switched by default to HTTPS, and the exported functions
+ should all work correctly
+- RAPI v1 has been removed
+- Many improvements to the KVM hypervisor
+- Block device errors are now better reported
+- Many other bugfixes and small improvements
+
Version 2.0 beta 1
- - Version 2 is a general rewrite of the code and therefore the
- differences are too many to list, see the design document for 2.0 in
- the doc/ subdirectory for more details
- - In this beta version there is not yet a migration path from 1.2
- (there will be one in the final 2.0 release)
- - A few significant changes are:
- - all commands are executed by a daemon (ganeti-masterd) and the
- various gnt-* commands are just front-ends to it
- - all the commands are entered into, and executed from a job queue,
- see gnt-job(8)
- - the RAPI daemon supports read-write operations, secured by basic
- HTTP authentication on top of HTTPS
- - DRBD version 0.7 support has been removed, DRBD 8 is the only
- supported version (when migrating from Ganeti 1.2 to 2.0, you need
- to migrate to DRBD 8 first while still running Ganeti 1.2)
- - DRBD devices are using statically allocated minor numbers, which
- will be assigned to existing instances during the migration
- process
- - there is support for both Xen PVM and Xen HVM instances running on
- the same cluster
- - KVM virtualization is supported too
- - file-based storage has been implemented, which means that it is
- possible to run the cluster without LVM and DRBD storage, for
- example using a shared filesystem exported from shared storage
- (and still have live migration)
+------------------
+
+- Version 2 is a general rewrite of the code and therefore the
+ differences are too many to list, see the design document for 2.0 in
+ the ``doc/`` subdirectory for more details
+- In this beta version there is not yet a migration path from 1.2 (there
+ will be one in the final 2.0 release)
+- A few significant changes are:
+
+ - all commands are executed by a daemon (``ganeti-masterd``) and the
+ various ``gnt-*`` commands are just front-ends to it
+ - all the commands are entered into, and executed from a job queue, see
+ the ``gnt-job(8)`` manpage
+ - the RAPI daemon supports read-write operations, secured by basic HTTP
+ authentication on top of HTTPS
+ - DRBD version 0.7 support has been removed, DRBD 8 is the only
+ supported version (when migrating from Ganeti 1.2 to 2.0, you need
+ to migrate to DRBD 8 first while still running Ganeti 1.2)
+ - DRBD devices are using statically allocated minor numbers, which
+ will be assigned to existing instances during the migration process
+ - there is support for both Xen PVM and Xen HVM instances running on
+ the same cluster
+ - KVM virtualization is supported too
+ - file-based storage has been implemented, which means that it is
+ possible to run the cluster without LVM and DRBD storage, for
+ example using a shared filesystem exported from shared storage (and
+ still have live migration)
+
Version 1.2.7
- - Change the default reboot type in gnt-instance reboot to "hard"
- - Reuse the old instance mac address by default on instance import,
- if the instance name is the same.
- - Handle situations in which the node info rpc returns incomplete results
- (issue 46)
- - Add checks for tcp/udp ports collisions in gnt-cluster verify
- - Improved version of batcher:
- - state file support
- - instance mac address support
- - support for HVM clusters/instances
- - Add an option to show the number of cpu sockets and nodes in gnt-node list
- - Support OSes that handle more than one version of the OS api
- (but do not change the current API in any other way)
- - Fix gnt-node migrate
- - gnt-debug man page
- - Fixes various more typos&small issues
- - Increase disk resync maximum speed to 60MB/s (from 30MB/s)
+-------------
+
+- Change the default reboot type in ``gnt-instance reboot`` to "hard"
+- Reuse the old instance mac address by default on instance import, if
+ the instance name is the same.
+- Handle situations in which the node info rpc returns incomplete results
+ (issue 46)
+- Add checks for tcp/udp ports collisions in ``gnt-cluster verify``
+- Improved version of batcher:
+
+ - state file support
+ - instance mac address support
+ - support for HVM clusters/instances
+
+- Add an option to show the number of cpu sockets and nodes in
+ ``gnt-node list``
+- Support OSes that handle more than one version of the OS api (but do
+ not change the current API in any other way)
+- Fix ``gnt-node migrate``
+- ``gnt-debug`` man page
+- Fixes various more typos and small issues
+- Increase disk resync maximum speed to 60MB/s (from 30MB/s)
+
Version 1.2.6
- - new --hvm-nic-type and --hvm-disk-type flags to control the type of disk
- exported to fully virtualized instances.
- - provide access to the serial console of HVM instances
- - instance auto_balance flag, set by default. If turned off it will avoid
- warnings on cluster verify if there is not enough memory to fail over an
- instance. in the future it will prevent automatically failing it over when
- we will support that.
- - batcher tool for instance creation, see /tools/README.batcher
- - gnt-instance reinstall --select-os to interactively select a new operating
- system when reinstalling an instance.
- - when changing the memory amount on instance modify a check has been added
- that the instance will be able to start. also warnings are emitted if the
- instance will not be able to fail over, if auto_balance is true.
- - documentation fixes
- - sync fields between instance list/modify/add/import
- - fix a race condition in drbd when the sync speed was set after giving the
- device a remote peer.
+-------------
+
+- new ``--hvm-nic-type`` and ``--hvm-disk-type`` flags to control the
+ type of disk exported to fully virtualized instances.
+- provide access to the serial console of HVM instances
+- instance auto_balance flag, set by default. If turned off it will avoid
+ warnings on cluster verify if there is not enough memory to fail over
+ an instance. in the future it will prevent automatically failing it
+ over when we will support that.
+- batcher tool for instance creation, see ``tools/README.batcher``
+- ``gnt-instance reinstall --select-os`` to interactively select a new
+ operating system when reinstalling an instance.
+- when changing the memory amount on instance modify a check has been
+ added that the instance will be able to start. also warnings are
+ emitted if the instance will not be able to fail over, if auto_balance
+ is true.
+- documentation fixes
+- sync fields between ``gnt-instance list/modify/add/import``
+- fix a race condition in drbd when the sync speed was set after giving
+ the device a remote peer.
+
Version 1.2.5
- - note: the allowed size and number of tags per object were reduced
- - fix a bug in “gnt-cluster verify” with inconsistent volume groups
- - fixed twisted 8.x compatibility
- - fixed gnt-instance replace-disks with iallocator
- - add TCP keepalives on twisted connections to detect restarted nodes
- - disk increase support, see “gnt-instance grow-disk”
- - implement bulk node/instance query for RAPI
- - add tags in node/instance listing (optional)
- - experimental migration (and live migration) support, read the man
- page for “gnt-instance migrate”
- - the ganeti-watcher logs are now timestamped, and the watcher also
- has some small improvements in handling its state file
+-------------
+
+- note: the allowed size and number of tags per object were reduced
+- fix a bug in ``gnt-cluster verify`` with inconsistent volume groups
+- fixed twisted 8.x compatibility
+- fixed ``gnt-instance replace-disks`` with iallocator
+- add TCP keepalives on twisted connections to detect restarted nodes
+- disk increase support, see ``gnt-instance grow-disk``
+- implement bulk node/instance query for RAPI
+- add tags in node/instance listing (optional)
+- experimental migration (and live migration) support, read the man page
+ for ``gnt-instance migrate``
+- the ``ganeti-watcher`` logs are now timestamped, and the watcher also
+ has some small improvements in handling its state file
+
Version 1.2.4
- - Experimental readonly, REST-based remote API implementation; automatically
- started on master node, TCP port 5080, if enabled by --enable-rapi
- parameter to configure script.
- - Instance allocator support. Add and import instance accept a --iallocator
- parameter, and call that instance allocator to decide which node to use for
- the instance. The iallocator document describes what's expected from an
- allocator script.
- - gnt-cluster verify N+1 memory redundancy checks: Unless passed the
- --no-nplus1-mem option gnt-cluster verify now checks that if a node is lost
- there is still enough memory to fail over the instances that reside on it.
- - gnt-cluster verify hooks: it is now possible to add post-hooks to
- gnt-cluster verify, to check for site-specific compliance. All the hooks
- will run, and their output, if any, will be displayed. Any failing hook
- will make the verification return an error value.
- - gnt-cluster verify now checks that its peers are reachable on the primary
- and secondary interfaces
- - gnt-node add now supports the --readd option, to readd a node that is still
- declared as part of the cluster and has failed.
- - gnt-* list commands now accept a new -o +field way of specifying output
- fields, that just adds the chosen fields to the default ones.
- - gnt-backup now has a new "remove" command to delete an existing export from
- the filesystem.
- - New per-instance parameters hvm_acpi, hvm_pae and hvm_cdrom_image_path have
- been added. Using them you can enable/disable acpi and pae support, and
- specify a path for a cd image to be exported to the instance. These
- parameters as the name suggest only work on HVM clusters.
- - When upgrading an HVM cluster to Ganeti 1.2.4, the values for ACPI and PAE
- support will be set to the previously hardcoded values, but the (previously
- hardcoded) path to the CDROM ISO image will be unset and if required, needs
- to be set manually with gnt-instance modify after the upgrade..
- - The address to which an instance's VNC console is bound is now selectable
- per-instance, rather than being cluster wide. Of course this only applies
- to instances controlled via VNC, so currently just applies to HVM clusters.
+-------------
+
+- Experimental readonly, REST-based remote API implementation;
+ automatically started on master node, TCP port 5080, if enabled by
+ ``--enable-rapi`` parameter to configure script.
+- Instance allocator support. Add and import instance accept a
+ ``--iallocator`` parameter, and call that instance allocator to decide
+ which node to use for the instance. The iallocator document describes
+ what's expected from an allocator script.
+- ``gnt-cluster verify`` N+1 memory redundancy checks: Unless passed the
+ ``--no-nplus1-mem`` option ``gnt-cluster verify`` now checks that if a
+ node is lost there is still enough memory to fail over the instances
+ that reside on it.
+- ``gnt-cluster verify`` hooks: it is now possible to add post-hooks to
+ ``gnt-cluster verify``, to check for site-specific compliance. All the
+ hooks will run, and their output, if any, will be displayed. Any
+ failing hook will make the verification return an error value.
+- ``gnt-cluster verify`` now checks that its peers are reachable on the
+ primary and secondary interfaces
+- ``gnt-node add`` now supports the ``--readd`` option, to readd a node
+ that is still declared as part of the cluster and has failed.
+- ``gnt-* list`` commands now accept a new ``-o +field`` way of
+ specifying output fields, that just adds the chosen fields to the
+ default ones.
+- ``gnt-backup`` now has a new ``remove`` command to delete an existing
+ export from the filesystem.
+- New per-instance parameters hvm_acpi, hvm_pae and hvm_cdrom_image_path
+ have been added. Using them you can enable/disable acpi and pae
+ support, and specify a path for a cd image to be exported to the
+ instance. These parameters as the name suggest only work on HVM
+ clusters.
+- When upgrading an HVM cluster to Ganeti 1.2.4, the values for ACPI and
+ PAE support will be set to the previously hardcoded values, but the
+ (previously hardcoded) path to the CDROM ISO image will be unset and
+ if required, needs to be set manually with ``gnt-instance modify``
+ after the upgrade.
+- The address to which an instance's VNC console is bound is now
+ selectable per-instance, rather than being cluster wide. Of course
+ this only applies to instances controlled via VNC, so currently just
+ applies to HVM clusters.
+
Version 1.2.3
- - more tweaks to the disk activation code (especially helpful for DRBD)
- - change the default ‘gnt-instance list’ output format, now there is
- one combined status field (see the manpage for the exact values this
- field will have)
- - some more fixes for the mac export to hooks change
- - make Ganeti not break with DRBD 8.2.x (which changed the version
- format in /proc/drbd) (issue 24)
- - add an upgrade tool from ‘remote_raid1’ disk template to ‘drbd’ disk
- template, allowing migration from DRBD0.7+MD to DRBD8
+-------------
+
+- more tweaks to the disk activation code (especially helpful for DRBD)
+- change the default ``gnt-instance list`` output format, now there is
+ one combined status field (see the manpage for the exact values this
+ field will have)
+- some more fixes for the mac export to hooks change
+- make Ganeti not break with DRBD 8.2.x (which changed the version
+ format in ``/proc/drbd``) (issue 24)
+- add an upgrade tool from "remote_raid1" disk template to "drbd" disk
+ template, allowing migration from DRBD0.7+MD to DRBD8
+
Version 1.2.2
- - fix ‘gnt-instance modify’ breakage introduced in 1.2.1 with the HVM
- support (issue 23)
- - add command aliases infrastructure and a few aliases
- - allow listing of VCPUs in the gnt-instance list and improve the man
- pages and the --help option of gnt-node/gnt-instance list
- - fix gnt-backup list with down nodes (issue 21)
- - change the tools location (move from $pkgdatadir to
- $pkglibdir/tools)
- - fix the dist archive and add a check for including svn/git files in
- the future
- - some developer-related changes: improve the burnin and the QA
- suite, add an upload script for testing during development
+-------------
+
+- fix ``gnt-instance modify`` breakage introduced in 1.2.1 with the HVM
+ support (issue 23)
+- add command aliases infrastructure and a few aliases
+- allow listing of VCPUs in the ``gnt-instance list`` and improve the
+ man pages and the ``--help`` option of ``gnt-node
+ list``/``gnt-instance list``
+- fix ``gnt-backup list`` with down nodes (issue 21)
+- change the tools location (move from $pkgdatadir to $pkglibdir/tools)
+- fix the dist archive and add a check for including svn/git files in
+ the future
+- some developer-related changes: improve the burnin and the QA suite,
+ add an upload script for testing during development
+
Version 1.2.1
- - experimental HVM support, read the install document, section
- "Initializing the cluster"
- - allow for the PVM hypervisor per-instance kernel and initrd paths
- - add a new command ‘gnt-cluster verify-disks’ which uses a new
- algorithm to improve the reconnection of the DRBD pairs if the
- device on the secondary node has gone away
- - make logical volume code auto-activate LVs at disk activation time
- - slightly improve the speed of activating disks
- - allow specification of the MAC address at instance creation time,
- and changing it later via ‘gnt-instance modify’
- - fix handling of external commands that generate lots of output on
- stderr
- - update documentation with regard to minimum version of DRBD8
- supported
+-------------
+
+- experimental HVM support, read the install document, section
+ "Initializing the cluster"
+- allow for the PVM hypervisor per-instance kernel and initrd paths
+- add a new command ``gnt-cluster verify-disks`` which uses a new
+ algorithm to improve the reconnection of the DRBD pairs if the device
+ on the secondary node has gone away
+- make logical volume code auto-activate LVs at disk activation time
+- slightly improve the speed of activating disks
+- allow specification of the MAC address at instance creation time, and
+ changing it later via ``gnt-instance modify``
+- fix handling of external commands that generate lots of output on
+ stderr
+- update documentation with regard to minimum version of DRBD8 supported
+
Version 1.2.0
- - Log the ‘xm create’ output to the node daemon log on failure (to
- help diagnosing the error)
- - In debug mode, log all external commands output if failed to the
- logs
- - Change parsing of lvm commands to ignore stderr
+-------------
+
+- Log the ``xm create`` output to the node daemon log on failure (to help
+ diagnosing the error)
+- In debug mode, log all external commands output if failed to the logs
+- Change parsing of lvm commands to ignore stderr
+
Version 1.2b3
- - Another round of updates to the DRBD 8 code to deal with more
- failures in the replace secondary node operation
- - Some more logging of failures in disk operations (lvm, drbd)
- - A few documentation updates
- - QA updates
+-------------
+
+- Another round of updates to the DRBD 8 code to deal with more failures
+ in the replace secondary node operation
+- Some more logging of failures in disk operations (lvm, drbd)
+- A few documentation updates
+- QA updates
+
Version 1.2b2
- - Change configuration file format from Python's Pickle to JSON.
- Upgrading is possible using the cfgupgrade utility.
- - Add support for DRBD 8.0 (new disk template `drbd`) which allows for
- faster replace disks and is more stable (DRBD 8 has many
- improvements compared to DRBD 0.7)
- - Added command line tags support (see man pages for gnt-instance,
- gnt-node, gnt-cluster)
- - Added instance rename support
- - Added multi-instance startup/shutdown
- - Added cluster rename support
- - Added `gnt-node evacuate` to simplify some node operations
- - Added instance reboot operation that can speedup reboot as compared
- to stop and start
- - Soften the requirement that hostnames are in FQDN format
- - The ganeti-watcher now activates drbd pairs after secondary node
- reboots
- - Removed dependency on debian's patched fping that uses the
- non-standard -S option
- - Now the OS definitions are searched for in multiple, configurable
- paths (easier for distros to package)
- - Some changes to the hooks infrastructure (especially the new
- post-configuration update hook)
- - Other small bugfixes
+-------------
+
+- Change configuration file format from Python's Pickle to JSON.
+ Upgrading is possible using the cfgupgrade utility.
+- Add support for DRBD 8.0 (new disk template ``drbd``) which allows for
+ faster replace disks and is more stable (DRBD 8 has many improvements
+ compared to DRBD 0.7)
+- Added command line tags support (see man pages for ``gnt-instance``,
+ ``gnt-node``, ``gnt-cluster``)
+- Added instance rename support
+- Added multi-instance startup/shutdown
+- Added cluster rename support
+- Added ``gnt-node evacuate`` to simplify some node operations
+- Added instance reboot operation that can speedup reboot as compared to
+ stop and start
+- Soften the requirement that hostnames are in FQDN format
+- The ``ganeti-watcher`` now activates drbd pairs after secondary node
+ reboots
+- Removed dependency on debian's patched fping that uses the
+ non-standard ``-S`` option
+- Now the OS definitions are searched for in multiple, configurable paths
+ (easier for distros to package)
+- Some changes to the hooks infrastructure (especially the new
+ post-configuration update hook)
+- Other small bugfixes
projects / ganeti-local / commitdiff