-###############
-# GRNET SETUP #
-###############
-# IP-less routing / proxy arp interfaces examples:
-# This vlan is used for internet connection of the VMs
-# The gateway is a router that connects all nodes VLANs
-# snf_public should be an existing routing table (in /etc/iproute/rt_tables)
-# The values of ip-routes and ip-gateway must be the same
-# decrared in ganeti network related to this routing table.
-# gnt-network add --network=62.217.123.128/27 --gateway=62.217.123.129
- --network6=2001:648:2ffc:1201::/64 --gateway6=2001:648:2ffc:1201::1
- --network-type=public --tags=nfdhcpd,ip-less-routed snf-net-1
-# gnt-network connect snf-net-1 all routed snf_public
-
-auto eth0.201
-iface eth0.201 inet manual
- ip-routing-table snf_public
- ip-routes 62.217.123.128/27
- ip-gateway 62.217.123.129
- ip-forwarding 1
- ip-proxy-arp 1
- arp-ip 62.217.123.158
-
-iface eth0.201 inet6 manual
- ip-routing-table snf_public
- ip-routes 2001:648:2ffc:1201::/64
- ip-gateway 2001:648:2ffc:1201::1
- ip-forwarding 1
- ip-proxy-ndp 1
-
-# A bridge pool to connect tap devices of private networks
-# A private network uses explicitly one vlan
-# prv1 8000.e4115bb2925c no eth0.2991
-# prv2 8000.e4115bb2925c no eth0.2992
-# prv3 8000.e4115bb2925c no eth0.2993
-# prv4 8000.e4115bb2925c no eth0.2994
-# prv5 8000.e4115bb2925c no eth0.2995
-auto prv
-iface prv inet manual
- up prv-net-helper up eth0 1 5 2990 prv
- down prv-net-helper down eth0 1 5 2990 prv
-
-# A bridge to connect tap devices of private networks
-# All private networks use this bridge
-# Isolation is provided with ebtables and MAC filtering
-# prv0 8000.e4115bb2925c no eth0.2990
-auto prv0
-iface prv0 inet manual
- bridge_ports eth0.2990
- bridge_stp off
- bridge_fd 2
- post-up ip link set prv0 address e4:11:5b:b2:92:5c
-
-
-#################
-# GENERIC SETUP #
-#################
-# All taps bridged on this bridged
-# eth0 is the node's primary interface
-# 62.217.123.132/27 is the node's primary address
-# 62.217.123.129 is the node's primary Gateway
-# aa:00:00:32:50:51 is the node's primary MAC address
-auto br0
-iface br0 inet manual
- bridge_ports eth0
- bridge_stp off
- bridge_fd 2
- up for ip in 62.217.123.132/27; do ip addr add $ip dev br0; done
- up ip route add default via 62.217.123.129 dev br0
- post-up ip link set br0 address aa:00:00:32:50:51
-
-
+interfaces