root / hw / pflash_cfi02.c @ 37952117
History | View | Annotate | Download (22.1 kB)
| 1 |
/*
|
|---|---|
| 2 |
* CFI parallel flash with AMD command set emulation
|
| 3 |
*
|
| 4 |
* Copyright (c) 2005 Jocelyn Mayer
|
| 5 |
*
|
| 6 |
* This library is free software; you can redistribute it and/or
|
| 7 |
* modify it under the terms of the GNU Lesser General Public
|
| 8 |
* License as published by the Free Software Foundation; either
|
| 9 |
* version 2 of the License, or (at your option) any later version.
|
| 10 |
*
|
| 11 |
* This library is distributed in the hope that it will be useful,
|
| 12 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
| 13 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
| 14 |
* Lesser General Public License for more details.
|
| 15 |
*
|
| 16 |
* You should have received a copy of the GNU Lesser General Public
|
| 17 |
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
|
| 18 |
*/
|
| 19 |
|
| 20 |
/*
|
| 21 |
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
| 22 |
* Supported commands/modes are:
|
| 23 |
* - flash read
|
| 24 |
* - flash write
|
| 25 |
* - flash ID read
|
| 26 |
* - sector erase
|
| 27 |
* - chip erase
|
| 28 |
* - unlock bypass command
|
| 29 |
* - CFI queries
|
| 30 |
*
|
| 31 |
* It does not support flash interleaving.
|
| 32 |
* It does not implement boot blocs with reduced size
|
| 33 |
* It does not implement software data protection as found in many real chips
|
| 34 |
* It does not implement erase suspend/resume commands
|
| 35 |
* It does not implement multiple sectors erase
|
| 36 |
*/
|
| 37 |
|
| 38 |
#include "hw.h" |
| 39 |
#include "flash.h" |
| 40 |
#include "qemu-timer.h" |
| 41 |
#include "block.h" |
| 42 |
#include "exec-memory.h" |
| 43 |
|
| 44 |
//#define PFLASH_DEBUG
|
| 45 |
#ifdef PFLASH_DEBUG
|
| 46 |
#define DPRINTF(fmt, ...) \
|
| 47 |
do { \
|
| 48 |
printf("PFLASH: " fmt , ## __VA_ARGS__); \ |
| 49 |
} while (0) |
| 50 |
#else
|
| 51 |
#define DPRINTF(fmt, ...) do { } while (0) |
| 52 |
#endif
|
| 53 |
|
| 54 |
#define PFLASH_LAZY_ROMD_THRESHOLD 42 |
| 55 |
|
| 56 |
struct pflash_t {
|
| 57 |
BlockDriverState *bs; |
| 58 |
target_phys_addr_t base; |
| 59 |
uint32_t sector_len; |
| 60 |
uint32_t chip_len; |
| 61 |
int mappings;
|
| 62 |
int width;
|
| 63 |
int wcycle; /* if 0, the flash is read normally */ |
| 64 |
int bypass;
|
| 65 |
int ro;
|
| 66 |
uint8_t cmd; |
| 67 |
uint8_t status; |
| 68 |
uint16_t ident[4];
|
| 69 |
uint16_t unlock_addr[2];
|
| 70 |
uint8_t cfi_len; |
| 71 |
uint8_t cfi_table[0x52];
|
| 72 |
QEMUTimer *timer; |
| 73 |
/* The device replicates the flash memory across its memory space. Emulate
|
| 74 |
* that by having a container (.mem) filled with an array of aliases
|
| 75 |
* (.mem_mappings) pointing to the flash memory (.orig_mem).
|
| 76 |
*/
|
| 77 |
MemoryRegion mem; |
| 78 |
MemoryRegion *mem_mappings; /* array; one per mapping */
|
| 79 |
MemoryRegion orig_mem; |
| 80 |
int rom_mode;
|
| 81 |
int read_counter; /* used for lazy switch-back to rom mode */ |
| 82 |
void *storage;
|
| 83 |
}; |
| 84 |
|
| 85 |
/*
|
| 86 |
* Set up replicated mappings of the same region.
|
| 87 |
*/
|
| 88 |
static void pflash_setup_mappings(pflash_t *pfl) |
| 89 |
{
|
| 90 |
unsigned i;
|
| 91 |
target_phys_addr_t size = memory_region_size(&pfl->orig_mem); |
| 92 |
|
| 93 |
memory_region_init(&pfl->mem, "pflash", pfl->mappings * size);
|
| 94 |
pfl->mem_mappings = g_new(MemoryRegion, pfl->mappings); |
| 95 |
for (i = 0; i < pfl->mappings; ++i) { |
| 96 |
memory_region_init_alias(&pfl->mem_mappings[i], "pflash-alias",
|
| 97 |
&pfl->orig_mem, 0, size);
|
| 98 |
memory_region_add_subregion(&pfl->mem, i * size, &pfl->mem_mappings[i]); |
| 99 |
} |
| 100 |
} |
| 101 |
|
| 102 |
static void pflash_register_memory(pflash_t *pfl, int rom_mode) |
| 103 |
{
|
| 104 |
memory_region_rom_device_set_readable(&pfl->orig_mem, rom_mode); |
| 105 |
pfl->rom_mode = rom_mode; |
| 106 |
} |
| 107 |
|
| 108 |
static void pflash_timer (void *opaque) |
| 109 |
{
|
| 110 |
pflash_t *pfl = opaque; |
| 111 |
|
| 112 |
DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
|
| 113 |
/* Reset flash */
|
| 114 |
pfl->status ^= 0x80;
|
| 115 |
if (pfl->bypass) {
|
| 116 |
pfl->wcycle = 2;
|
| 117 |
} else {
|
| 118 |
pflash_register_memory(pfl, 1);
|
| 119 |
pfl->wcycle = 0;
|
| 120 |
} |
| 121 |
pfl->cmd = 0;
|
| 122 |
} |
| 123 |
|
| 124 |
static uint32_t pflash_read (pflash_t *pfl, target_phys_addr_t offset,
|
| 125 |
int width, int be) |
| 126 |
{
|
| 127 |
target_phys_addr_t boff; |
| 128 |
uint32_t ret; |
| 129 |
uint8_t *p; |
| 130 |
|
| 131 |
DPRINTF("%s: offset " TARGET_FMT_plx "\n", __func__, offset); |
| 132 |
ret = -1;
|
| 133 |
/* Lazy reset to ROMD mode after a certain amount of read accesses */
|
| 134 |
if (!pfl->rom_mode && pfl->wcycle == 0 && |
| 135 |
++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) {
|
| 136 |
pflash_register_memory(pfl, 1);
|
| 137 |
} |
| 138 |
offset &= pfl->chip_len - 1;
|
| 139 |
boff = offset & 0xFF;
|
| 140 |
if (pfl->width == 2) |
| 141 |
boff = boff >> 1;
|
| 142 |
else if (pfl->width == 4) |
| 143 |
boff = boff >> 2;
|
| 144 |
switch (pfl->cmd) {
|
| 145 |
default:
|
| 146 |
/* This should never happen : reset state & treat it as a read*/
|
| 147 |
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
| 148 |
pfl->wcycle = 0;
|
| 149 |
pfl->cmd = 0;
|
| 150 |
case 0x80: |
| 151 |
/* We accept reads during second unlock sequence... */
|
| 152 |
case 0x00: |
| 153 |
flash_read:
|
| 154 |
/* Flash area read */
|
| 155 |
p = pfl->storage; |
| 156 |
switch (width) {
|
| 157 |
case 1: |
| 158 |
ret = p[offset]; |
| 159 |
// DPRINTF("%s: data offset %08x %02x\n", __func__, offset, ret);
|
| 160 |
break;
|
| 161 |
case 2: |
| 162 |
if (be) {
|
| 163 |
ret = p[offset] << 8;
|
| 164 |
ret |= p[offset + 1];
|
| 165 |
} else {
|
| 166 |
ret = p[offset]; |
| 167 |
ret |= p[offset + 1] << 8; |
| 168 |
} |
| 169 |
// DPRINTF("%s: data offset %08x %04x\n", __func__, offset, ret);
|
| 170 |
break;
|
| 171 |
case 4: |
| 172 |
if (be) {
|
| 173 |
ret = p[offset] << 24;
|
| 174 |
ret |= p[offset + 1] << 16; |
| 175 |
ret |= p[offset + 2] << 8; |
| 176 |
ret |= p[offset + 3];
|
| 177 |
} else {
|
| 178 |
ret = p[offset]; |
| 179 |
ret |= p[offset + 1] << 8; |
| 180 |
ret |= p[offset + 2] << 16; |
| 181 |
ret |= p[offset + 3] << 24; |
| 182 |
} |
| 183 |
// DPRINTF("%s: data offset %08x %08x\n", __func__, offset, ret);
|
| 184 |
break;
|
| 185 |
} |
| 186 |
break;
|
| 187 |
case 0x90: |
| 188 |
/* flash ID read */
|
| 189 |
switch (boff) {
|
| 190 |
case 0x00: |
| 191 |
case 0x01: |
| 192 |
ret = pfl->ident[boff & 0x01];
|
| 193 |
break;
|
| 194 |
case 0x02: |
| 195 |
ret = 0x00; /* Pretend all sectors are unprotected */ |
| 196 |
break;
|
| 197 |
case 0x0E: |
| 198 |
case 0x0F: |
| 199 |
if (pfl->ident[2 + (boff & 0x01)] == (uint8_t)-1) |
| 200 |
goto flash_read;
|
| 201 |
ret = pfl->ident[2 + (boff & 0x01)]; |
| 202 |
break;
|
| 203 |
default:
|
| 204 |
goto flash_read;
|
| 205 |
} |
| 206 |
DPRINTF("%s: ID " TARGET_FMT_plx " %x\n", __func__, boff, ret); |
| 207 |
break;
|
| 208 |
case 0xA0: |
| 209 |
case 0x10: |
| 210 |
case 0x30: |
| 211 |
/* Status register read */
|
| 212 |
ret = pfl->status; |
| 213 |
DPRINTF("%s: status %x\n", __func__, ret);
|
| 214 |
/* Toggle bit 6 */
|
| 215 |
pfl->status ^= 0x40;
|
| 216 |
break;
|
| 217 |
case 0x98: |
| 218 |
/* CFI query mode */
|
| 219 |
if (boff > pfl->cfi_len)
|
| 220 |
ret = 0;
|
| 221 |
else
|
| 222 |
ret = pfl->cfi_table[boff]; |
| 223 |
break;
|
| 224 |
} |
| 225 |
|
| 226 |
return ret;
|
| 227 |
} |
| 228 |
|
| 229 |
/* update flash content on disk */
|
| 230 |
static void pflash_update(pflash_t *pfl, int offset, |
| 231 |
int size)
|
| 232 |
{
|
| 233 |
int offset_end;
|
| 234 |
if (pfl->bs) {
|
| 235 |
offset_end = offset + size; |
| 236 |
/* round to sectors */
|
| 237 |
offset = offset >> 9;
|
| 238 |
offset_end = (offset_end + 511) >> 9; |
| 239 |
bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
|
| 240 |
offset_end - offset); |
| 241 |
} |
| 242 |
} |
| 243 |
|
| 244 |
static void pflash_write (pflash_t *pfl, target_phys_addr_t offset, |
| 245 |
uint32_t value, int width, int be) |
| 246 |
{
|
| 247 |
target_phys_addr_t boff; |
| 248 |
uint8_t *p; |
| 249 |
uint8_t cmd; |
| 250 |
|
| 251 |
cmd = value; |
| 252 |
if (pfl->cmd != 0xA0 && cmd == 0xF0) { |
| 253 |
#if 0
|
| 254 |
DPRINTF("%s: flash reset asked (%02x %02x)\n",
|
| 255 |
__func__, pfl->cmd, cmd);
|
| 256 |
#endif
|
| 257 |
goto reset_flash;
|
| 258 |
} |
| 259 |
DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d %d\n", __func__, |
| 260 |
offset, value, width, pfl->wcycle); |
| 261 |
offset &= pfl->chip_len - 1;
|
| 262 |
|
| 263 |
DPRINTF("%s: offset " TARGET_FMT_plx " %08x %d\n", __func__, |
| 264 |
offset, value, width); |
| 265 |
boff = offset & (pfl->sector_len - 1);
|
| 266 |
if (pfl->width == 2) |
| 267 |
boff = boff >> 1;
|
| 268 |
else if (pfl->width == 4) |
| 269 |
boff = boff >> 2;
|
| 270 |
switch (pfl->wcycle) {
|
| 271 |
case 0: |
| 272 |
/* Set the device in I/O access mode if required */
|
| 273 |
if (pfl->rom_mode)
|
| 274 |
pflash_register_memory(pfl, 0);
|
| 275 |
pfl->read_counter = 0;
|
| 276 |
/* We're in read mode */
|
| 277 |
check_unlock0:
|
| 278 |
if (boff == 0x55 && cmd == 0x98) { |
| 279 |
enter_CFI_mode:
|
| 280 |
/* Enter CFI query mode */
|
| 281 |
pfl->wcycle = 7;
|
| 282 |
pfl->cmd = 0x98;
|
| 283 |
return;
|
| 284 |
} |
| 285 |
if (boff != pfl->unlock_addr[0] || cmd != 0xAA) { |
| 286 |
DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n", |
| 287 |
__func__, boff, cmd, pfl->unlock_addr[0]);
|
| 288 |
goto reset_flash;
|
| 289 |
} |
| 290 |
DPRINTF("%s: unlock sequence started\n", __func__);
|
| 291 |
break;
|
| 292 |
case 1: |
| 293 |
/* We started an unlock sequence */
|
| 294 |
check_unlock1:
|
| 295 |
if (boff != pfl->unlock_addr[1] || cmd != 0x55) { |
| 296 |
DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__, |
| 297 |
boff, cmd); |
| 298 |
goto reset_flash;
|
| 299 |
} |
| 300 |
DPRINTF("%s: unlock sequence done\n", __func__);
|
| 301 |
break;
|
| 302 |
case 2: |
| 303 |
/* We finished an unlock sequence */
|
| 304 |
if (!pfl->bypass && boff != pfl->unlock_addr[0]) { |
| 305 |
DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__, |
| 306 |
boff, cmd); |
| 307 |
goto reset_flash;
|
| 308 |
} |
| 309 |
switch (cmd) {
|
| 310 |
case 0x20: |
| 311 |
pfl->bypass = 1;
|
| 312 |
goto do_bypass;
|
| 313 |
case 0x80: |
| 314 |
case 0x90: |
| 315 |
case 0xA0: |
| 316 |
pfl->cmd = cmd; |
| 317 |
DPRINTF("%s: starting command %02x\n", __func__, cmd);
|
| 318 |
break;
|
| 319 |
default:
|
| 320 |
DPRINTF("%s: unknown command %02x\n", __func__, cmd);
|
| 321 |
goto reset_flash;
|
| 322 |
} |
| 323 |
break;
|
| 324 |
case 3: |
| 325 |
switch (pfl->cmd) {
|
| 326 |
case 0x80: |
| 327 |
/* We need another unlock sequence */
|
| 328 |
goto check_unlock0;
|
| 329 |
case 0xA0: |
| 330 |
DPRINTF("%s: write data offset " TARGET_FMT_plx " %08x %d\n", |
| 331 |
__func__, offset, value, width); |
| 332 |
p = pfl->storage; |
| 333 |
if (!pfl->ro) {
|
| 334 |
switch (width) {
|
| 335 |
case 1: |
| 336 |
p[offset] &= value; |
| 337 |
pflash_update(pfl, offset, 1);
|
| 338 |
break;
|
| 339 |
case 2: |
| 340 |
if (be) {
|
| 341 |
p[offset] &= value >> 8;
|
| 342 |
p[offset + 1] &= value;
|
| 343 |
} else {
|
| 344 |
p[offset] &= value; |
| 345 |
p[offset + 1] &= value >> 8; |
| 346 |
} |
| 347 |
pflash_update(pfl, offset, 2);
|
| 348 |
break;
|
| 349 |
case 4: |
| 350 |
if (be) {
|
| 351 |
p[offset] &= value >> 24;
|
| 352 |
p[offset + 1] &= value >> 16; |
| 353 |
p[offset + 2] &= value >> 8; |
| 354 |
p[offset + 3] &= value;
|
| 355 |
} else {
|
| 356 |
p[offset] &= value; |
| 357 |
p[offset + 1] &= value >> 8; |
| 358 |
p[offset + 2] &= value >> 16; |
| 359 |
p[offset + 3] &= value >> 24; |
| 360 |
} |
| 361 |
pflash_update(pfl, offset, 4);
|
| 362 |
break;
|
| 363 |
} |
| 364 |
} |
| 365 |
pfl->status = 0x00 | ~(value & 0x80); |
| 366 |
/* Let's pretend write is immediate */
|
| 367 |
if (pfl->bypass)
|
| 368 |
goto do_bypass;
|
| 369 |
goto reset_flash;
|
| 370 |
case 0x90: |
| 371 |
if (pfl->bypass && cmd == 0x00) { |
| 372 |
/* Unlock bypass reset */
|
| 373 |
goto reset_flash;
|
| 374 |
} |
| 375 |
/* We can enter CFI query mode from autoselect mode */
|
| 376 |
if (boff == 0x55 && cmd == 0x98) |
| 377 |
goto enter_CFI_mode;
|
| 378 |
/* No break here */
|
| 379 |
default:
|
| 380 |
DPRINTF("%s: invalid write for command %02x\n",
|
| 381 |
__func__, pfl->cmd); |
| 382 |
goto reset_flash;
|
| 383 |
} |
| 384 |
case 4: |
| 385 |
switch (pfl->cmd) {
|
| 386 |
case 0xA0: |
| 387 |
/* Ignore writes while flash data write is occurring */
|
| 388 |
/* As we suppose write is immediate, this should never happen */
|
| 389 |
return;
|
| 390 |
case 0x80: |
| 391 |
goto check_unlock1;
|
| 392 |
default:
|
| 393 |
/* Should never happen */
|
| 394 |
DPRINTF("%s: invalid command state %02x (wc 4)\n",
|
| 395 |
__func__, pfl->cmd); |
| 396 |
goto reset_flash;
|
| 397 |
} |
| 398 |
break;
|
| 399 |
case 5: |
| 400 |
switch (cmd) {
|
| 401 |
case 0x10: |
| 402 |
if (boff != pfl->unlock_addr[0]) { |
| 403 |
DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n", |
| 404 |
__func__, offset); |
| 405 |
goto reset_flash;
|
| 406 |
} |
| 407 |
/* Chip erase */
|
| 408 |
DPRINTF("%s: start chip erase\n", __func__);
|
| 409 |
if (!pfl->ro) {
|
| 410 |
memset(pfl->storage, 0xFF, pfl->chip_len);
|
| 411 |
pflash_update(pfl, 0, pfl->chip_len);
|
| 412 |
} |
| 413 |
pfl->status = 0x00;
|
| 414 |
/* Let's wait 5 seconds before chip erase is done */
|
| 415 |
qemu_mod_timer(pfl->timer, |
| 416 |
qemu_get_clock_ns(vm_clock) + (get_ticks_per_sec() * 5));
|
| 417 |
break;
|
| 418 |
case 0x30: |
| 419 |
/* Sector erase */
|
| 420 |
p = pfl->storage; |
| 421 |
offset &= ~(pfl->sector_len - 1);
|
| 422 |
DPRINTF("%s: start sector erase at " TARGET_FMT_plx "\n", __func__, |
| 423 |
offset); |
| 424 |
if (!pfl->ro) {
|
| 425 |
memset(p + offset, 0xFF, pfl->sector_len);
|
| 426 |
pflash_update(pfl, offset, pfl->sector_len); |
| 427 |
} |
| 428 |
pfl->status = 0x00;
|
| 429 |
/* Let's wait 1/2 second before sector erase is done */
|
| 430 |
qemu_mod_timer(pfl->timer, |
| 431 |
qemu_get_clock_ns(vm_clock) + (get_ticks_per_sec() / 2));
|
| 432 |
break;
|
| 433 |
default:
|
| 434 |
DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
|
| 435 |
goto reset_flash;
|
| 436 |
} |
| 437 |
pfl->cmd = cmd; |
| 438 |
break;
|
| 439 |
case 6: |
| 440 |
switch (pfl->cmd) {
|
| 441 |
case 0x10: |
| 442 |
/* Ignore writes during chip erase */
|
| 443 |
return;
|
| 444 |
case 0x30: |
| 445 |
/* Ignore writes during sector erase */
|
| 446 |
return;
|
| 447 |
default:
|
| 448 |
/* Should never happen */
|
| 449 |
DPRINTF("%s: invalid command state %02x (wc 6)\n",
|
| 450 |
__func__, pfl->cmd); |
| 451 |
goto reset_flash;
|
| 452 |
} |
| 453 |
break;
|
| 454 |
case 7: /* Special value for CFI queries */ |
| 455 |
DPRINTF("%s: invalid write in CFI query mode\n", __func__);
|
| 456 |
goto reset_flash;
|
| 457 |
default:
|
| 458 |
/* Should never happen */
|
| 459 |
DPRINTF("%s: invalid write state (wc 7)\n", __func__);
|
| 460 |
goto reset_flash;
|
| 461 |
} |
| 462 |
pfl->wcycle++; |
| 463 |
|
| 464 |
return;
|
| 465 |
|
| 466 |
/* Reset flash */
|
| 467 |
reset_flash:
|
| 468 |
pfl->bypass = 0;
|
| 469 |
pfl->wcycle = 0;
|
| 470 |
pfl->cmd = 0;
|
| 471 |
return;
|
| 472 |
|
| 473 |
do_bypass:
|
| 474 |
pfl->wcycle = 2;
|
| 475 |
pfl->cmd = 0;
|
| 476 |
return;
|
| 477 |
} |
| 478 |
|
| 479 |
|
| 480 |
static uint32_t pflash_readb_be(void *opaque, target_phys_addr_t addr) |
| 481 |
{
|
| 482 |
return pflash_read(opaque, addr, 1, 1); |
| 483 |
} |
| 484 |
|
| 485 |
static uint32_t pflash_readb_le(void *opaque, target_phys_addr_t addr) |
| 486 |
{
|
| 487 |
return pflash_read(opaque, addr, 1, 0); |
| 488 |
} |
| 489 |
|
| 490 |
static uint32_t pflash_readw_be(void *opaque, target_phys_addr_t addr) |
| 491 |
{
|
| 492 |
pflash_t *pfl = opaque; |
| 493 |
|
| 494 |
return pflash_read(pfl, addr, 2, 1); |
| 495 |
} |
| 496 |
|
| 497 |
static uint32_t pflash_readw_le(void *opaque, target_phys_addr_t addr) |
| 498 |
{
|
| 499 |
pflash_t *pfl = opaque; |
| 500 |
|
| 501 |
return pflash_read(pfl, addr, 2, 0); |
| 502 |
} |
| 503 |
|
| 504 |
static uint32_t pflash_readl_be(void *opaque, target_phys_addr_t addr) |
| 505 |
{
|
| 506 |
pflash_t *pfl = opaque; |
| 507 |
|
| 508 |
return pflash_read(pfl, addr, 4, 1); |
| 509 |
} |
| 510 |
|
| 511 |
static uint32_t pflash_readl_le(void *opaque, target_phys_addr_t addr) |
| 512 |
{
|
| 513 |
pflash_t *pfl = opaque; |
| 514 |
|
| 515 |
return pflash_read(pfl, addr, 4, 0); |
| 516 |
} |
| 517 |
|
| 518 |
static void pflash_writeb_be(void *opaque, target_phys_addr_t addr, |
| 519 |
uint32_t value) |
| 520 |
{
|
| 521 |
pflash_write(opaque, addr, value, 1, 1); |
| 522 |
} |
| 523 |
|
| 524 |
static void pflash_writeb_le(void *opaque, target_phys_addr_t addr, |
| 525 |
uint32_t value) |
| 526 |
{
|
| 527 |
pflash_write(opaque, addr, value, 1, 0); |
| 528 |
} |
| 529 |
|
| 530 |
static void pflash_writew_be(void *opaque, target_phys_addr_t addr, |
| 531 |
uint32_t value) |
| 532 |
{
|
| 533 |
pflash_t *pfl = opaque; |
| 534 |
|
| 535 |
pflash_write(pfl, addr, value, 2, 1); |
| 536 |
} |
| 537 |
|
| 538 |
static void pflash_writew_le(void *opaque, target_phys_addr_t addr, |
| 539 |
uint32_t value) |
| 540 |
{
|
| 541 |
pflash_t *pfl = opaque; |
| 542 |
|
| 543 |
pflash_write(pfl, addr, value, 2, 0); |
| 544 |
} |
| 545 |
|
| 546 |
static void pflash_writel_be(void *opaque, target_phys_addr_t addr, |
| 547 |
uint32_t value) |
| 548 |
{
|
| 549 |
pflash_t *pfl = opaque; |
| 550 |
|
| 551 |
pflash_write(pfl, addr, value, 4, 1); |
| 552 |
} |
| 553 |
|
| 554 |
static void pflash_writel_le(void *opaque, target_phys_addr_t addr, |
| 555 |
uint32_t value) |
| 556 |
{
|
| 557 |
pflash_t *pfl = opaque; |
| 558 |
|
| 559 |
pflash_write(pfl, addr, value, 4, 0); |
| 560 |
} |
| 561 |
|
| 562 |
static const MemoryRegionOps pflash_cfi02_ops_be = { |
| 563 |
.old_mmio = {
|
| 564 |
.read = { pflash_readb_be, pflash_readw_be, pflash_readl_be, },
|
| 565 |
.write = { pflash_writeb_be, pflash_writew_be, pflash_writel_be, },
|
| 566 |
}, |
| 567 |
.endianness = DEVICE_NATIVE_ENDIAN, |
| 568 |
}; |
| 569 |
|
| 570 |
static const MemoryRegionOps pflash_cfi02_ops_le = { |
| 571 |
.old_mmio = {
|
| 572 |
.read = { pflash_readb_le, pflash_readw_le, pflash_readl_le, },
|
| 573 |
.write = { pflash_writeb_le, pflash_writew_le, pflash_writel_le, },
|
| 574 |
}, |
| 575 |
.endianness = DEVICE_NATIVE_ENDIAN, |
| 576 |
}; |
| 577 |
|
| 578 |
/* Count trailing zeroes of a 32 bits quantity */
|
| 579 |
static int ctz32 (uint32_t n) |
| 580 |
{
|
| 581 |
int ret;
|
| 582 |
|
| 583 |
ret = 0;
|
| 584 |
if (!(n & 0xFFFF)) { |
| 585 |
ret += 16;
|
| 586 |
n = n >> 16;
|
| 587 |
} |
| 588 |
if (!(n & 0xFF)) { |
| 589 |
ret += 8;
|
| 590 |
n = n >> 8;
|
| 591 |
} |
| 592 |
if (!(n & 0xF)) { |
| 593 |
ret += 4;
|
| 594 |
n = n >> 4;
|
| 595 |
} |
| 596 |
if (!(n & 0x3)) { |
| 597 |
ret += 2;
|
| 598 |
n = n >> 2;
|
| 599 |
} |
| 600 |
if (!(n & 0x1)) { |
| 601 |
ret++; |
| 602 |
#if 0 /* This is not necessary as n is never 0 */
|
| 603 |
n = n >> 1;
|
| 604 |
#endif
|
| 605 |
} |
| 606 |
#if 0 /* This is not necessary as n is never 0 */
|
| 607 |
if (!n)
|
| 608 |
ret++;
|
| 609 |
#endif
|
| 610 |
|
| 611 |
return ret;
|
| 612 |
} |
| 613 |
|
| 614 |
pflash_t *pflash_cfi02_register(target_phys_addr_t base, |
| 615 |
DeviceState *qdev, const char *name, |
| 616 |
target_phys_addr_t size, |
| 617 |
BlockDriverState *bs, uint32_t sector_len, |
| 618 |
int nb_blocs, int nb_mappings, int width, |
| 619 |
uint16_t id0, uint16_t id1, |
| 620 |
uint16_t id2, uint16_t id3, |
| 621 |
uint16_t unlock_addr0, uint16_t unlock_addr1, |
| 622 |
int be)
|
| 623 |
{
|
| 624 |
pflash_t *pfl; |
| 625 |
int32_t chip_len; |
| 626 |
int ret;
|
| 627 |
|
| 628 |
chip_len = sector_len * nb_blocs; |
| 629 |
/* XXX: to be fixed */
|
| 630 |
#if 0
|
| 631 |
if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
|
| 632 |
total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
|
| 633 |
return NULL;
|
| 634 |
#endif
|
| 635 |
pfl = g_malloc0(sizeof(pflash_t));
|
| 636 |
memory_region_init_rom_device( |
| 637 |
&pfl->orig_mem, be ? &pflash_cfi02_ops_be : &pflash_cfi02_ops_le, pfl, |
| 638 |
name, size); |
| 639 |
vmstate_register_ram(&pfl->orig_mem, qdev); |
| 640 |
pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem); |
| 641 |
pfl->base = base; |
| 642 |
pfl->chip_len = chip_len; |
| 643 |
pfl->mappings = nb_mappings; |
| 644 |
pfl->bs = bs; |
| 645 |
if (pfl->bs) {
|
| 646 |
/* read the initial flash content */
|
| 647 |
ret = bdrv_read(pfl->bs, 0, pfl->storage, chip_len >> 9); |
| 648 |
if (ret < 0) { |
| 649 |
g_free(pfl); |
| 650 |
return NULL; |
| 651 |
} |
| 652 |
bdrv_attach_dev_nofail(pfl->bs, pfl); |
| 653 |
} |
| 654 |
|
| 655 |
pflash_setup_mappings(pfl); |
| 656 |
pfl->rom_mode = 1;
|
| 657 |
memory_region_add_subregion(get_system_memory(), pfl->base, &pfl->mem); |
| 658 |
|
| 659 |
if (pfl->bs) {
|
| 660 |
pfl->ro = bdrv_is_read_only(pfl->bs); |
| 661 |
} else {
|
| 662 |
pfl->ro = 0;
|
| 663 |
} |
| 664 |
|
| 665 |
pfl->timer = qemu_new_timer_ns(vm_clock, pflash_timer, pfl); |
| 666 |
pfl->sector_len = sector_len; |
| 667 |
pfl->width = width; |
| 668 |
pfl->wcycle = 0;
|
| 669 |
pfl->cmd = 0;
|
| 670 |
pfl->status = 0;
|
| 671 |
pfl->ident[0] = id0;
|
| 672 |
pfl->ident[1] = id1;
|
| 673 |
pfl->ident[2] = id2;
|
| 674 |
pfl->ident[3] = id3;
|
| 675 |
pfl->unlock_addr[0] = unlock_addr0;
|
| 676 |
pfl->unlock_addr[1] = unlock_addr1;
|
| 677 |
/* Hardcoded CFI table (mostly from SG29 Spansion flash) */
|
| 678 |
pfl->cfi_len = 0x52;
|
| 679 |
/* Standard "QRY" string */
|
| 680 |
pfl->cfi_table[0x10] = 'Q'; |
| 681 |
pfl->cfi_table[0x11] = 'R'; |
| 682 |
pfl->cfi_table[0x12] = 'Y'; |
| 683 |
/* Command set (AMD/Fujitsu) */
|
| 684 |
pfl->cfi_table[0x13] = 0x02; |
| 685 |
pfl->cfi_table[0x14] = 0x00; |
| 686 |
/* Primary extended table address */
|
| 687 |
pfl->cfi_table[0x15] = 0x31; |
| 688 |
pfl->cfi_table[0x16] = 0x00; |
| 689 |
/* Alternate command set (none) */
|
| 690 |
pfl->cfi_table[0x17] = 0x00; |
| 691 |
pfl->cfi_table[0x18] = 0x00; |
| 692 |
/* Alternate extended table (none) */
|
| 693 |
pfl->cfi_table[0x19] = 0x00; |
| 694 |
pfl->cfi_table[0x1A] = 0x00; |
| 695 |
/* Vcc min */
|
| 696 |
pfl->cfi_table[0x1B] = 0x27; |
| 697 |
/* Vcc max */
|
| 698 |
pfl->cfi_table[0x1C] = 0x36; |
| 699 |
/* Vpp min (no Vpp pin) */
|
| 700 |
pfl->cfi_table[0x1D] = 0x00; |
| 701 |
/* Vpp max (no Vpp pin) */
|
| 702 |
pfl->cfi_table[0x1E] = 0x00; |
| 703 |
/* Reserved */
|
| 704 |
pfl->cfi_table[0x1F] = 0x07; |
| 705 |
/* Timeout for min size buffer write (NA) */
|
| 706 |
pfl->cfi_table[0x20] = 0x00; |
| 707 |
/* Typical timeout for block erase (512 ms) */
|
| 708 |
pfl->cfi_table[0x21] = 0x09; |
| 709 |
/* Typical timeout for full chip erase (4096 ms) */
|
| 710 |
pfl->cfi_table[0x22] = 0x0C; |
| 711 |
/* Reserved */
|
| 712 |
pfl->cfi_table[0x23] = 0x01; |
| 713 |
/* Max timeout for buffer write (NA) */
|
| 714 |
pfl->cfi_table[0x24] = 0x00; |
| 715 |
/* Max timeout for block erase */
|
| 716 |
pfl->cfi_table[0x25] = 0x0A; |
| 717 |
/* Max timeout for chip erase */
|
| 718 |
pfl->cfi_table[0x26] = 0x0D; |
| 719 |
/* Device size */
|
| 720 |
pfl->cfi_table[0x27] = ctz32(chip_len);
|
| 721 |
/* Flash device interface (8 & 16 bits) */
|
| 722 |
pfl->cfi_table[0x28] = 0x02; |
| 723 |
pfl->cfi_table[0x29] = 0x00; |
| 724 |
/* Max number of bytes in multi-bytes write */
|
| 725 |
/* XXX: disable buffered write as it's not supported */
|
| 726 |
// pfl->cfi_table[0x2A] = 0x05;
|
| 727 |
pfl->cfi_table[0x2A] = 0x00; |
| 728 |
pfl->cfi_table[0x2B] = 0x00; |
| 729 |
/* Number of erase block regions (uniform) */
|
| 730 |
pfl->cfi_table[0x2C] = 0x01; |
| 731 |
/* Erase block region 1 */
|
| 732 |
pfl->cfi_table[0x2D] = nb_blocs - 1; |
| 733 |
pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8; |
| 734 |
pfl->cfi_table[0x2F] = sector_len >> 8; |
| 735 |
pfl->cfi_table[0x30] = sector_len >> 16; |
| 736 |
|
| 737 |
/* Extended */
|
| 738 |
pfl->cfi_table[0x31] = 'P'; |
| 739 |
pfl->cfi_table[0x32] = 'R'; |
| 740 |
pfl->cfi_table[0x33] = 'I'; |
| 741 |
|
| 742 |
pfl->cfi_table[0x34] = '1'; |
| 743 |
pfl->cfi_table[0x35] = '0'; |
| 744 |
|
| 745 |
pfl->cfi_table[0x36] = 0x00; |
| 746 |
pfl->cfi_table[0x37] = 0x00; |
| 747 |
pfl->cfi_table[0x38] = 0x00; |
| 748 |
pfl->cfi_table[0x39] = 0x00; |
| 749 |
|
| 750 |
pfl->cfi_table[0x3a] = 0x00; |
| 751 |
|
| 752 |
pfl->cfi_table[0x3b] = 0x00; |
| 753 |
pfl->cfi_table[0x3c] = 0x00; |
| 754 |
|
| 755 |
return pfl;
|
| 756 |
} |