Archipelago » qemu

/*

 * Status and system control registers for ARM RealView/Versatile boards.

 *

 * Copyright (c) 2006-2007 CodeSourcery.

 * Written by Paul Brook

 *

 * This code is licensed under the GPL.

 */

#include "hw.h"

#include "qemu/timer.h"

#include "sysbus.h"

#include "primecell.h"

#include "sysemu/sysemu.h"

#define LOCK_VALUE 0xa05f

typedef struct {

    SysBusDevice busdev;

    MemoryRegion iomem;

    qemu_irq pl110_mux_ctrl;

    uint32_t sys_id;

    uint32_t leds;

    uint16_t lockval;

    uint32_t cfgdata1;

    uint32_t cfgdata2;

    uint32_t flags;

    uint32_t nvflags;

    uint32_t resetlevel;

    uint32_t proc_id;

    uint32_t sys_mci;

    uint32_t sys_cfgdata;

    uint32_t sys_cfgctrl;

    uint32_t sys_cfgstat;

    uint32_t sys_clcd;

} arm_sysctl_state;

static const VMStateDescription vmstate_arm_sysctl = {

    .name = "realview_sysctl",

    .version_id = 3,

    .minimum_version_id = 1,

    .fields = (VMStateField[]) {

        VMSTATE_UINT32(leds, arm_sysctl_state),

        VMSTATE_UINT16(lockval, arm_sysctl_state),

        VMSTATE_UINT32(cfgdata1, arm_sysctl_state),

        VMSTATE_UINT32(cfgdata2, arm_sysctl_state),

        VMSTATE_UINT32(flags, arm_sysctl_state),

        VMSTATE_UINT32(nvflags, arm_sysctl_state),

        VMSTATE_UINT32(resetlevel, arm_sysctl_state),

        VMSTATE_UINT32_V(sys_mci, arm_sysctl_state, 2),

        VMSTATE_UINT32_V(sys_cfgdata, arm_sysctl_state, 2),

        VMSTATE_UINT32_V(sys_cfgctrl, arm_sysctl_state, 2),

        VMSTATE_UINT32_V(sys_cfgstat, arm_sysctl_state, 2),

        VMSTATE_UINT32_V(sys_clcd, arm_sysctl_state, 3),

        VMSTATE_END_OF_LIST()

    }

};

/* The PB926 actually uses a different format for

 * its SYS_ID register. Fortunately the bits which are

 * board type on later boards are distinct.

 */

#define BOARD_ID_PB926 0x100

#define BOARD_ID_EB 0x140

#define BOARD_ID_PBA8 0x178

#define BOARD_ID_PBX 0x182

#define BOARD_ID_VEXPRESS 0x190

static int board_id(arm_sysctl_state *s)

{

    /* Extract the board ID field from the SYS_ID register value */

    return (s->sys_id >> 16) & 0xfff;

}

static void arm_sysctl_reset(DeviceState *d)

{

    arm_sysctl_state *s = FROM_SYSBUS(arm_sysctl_state, SYS_BUS_DEVICE(d));

    s->leds = 0;

    s->lockval = 0;

    s->cfgdata1 = 0;

    s->cfgdata2 = 0;

    s->flags = 0;

    s->resetlevel = 0;

    if (board_id(s) == BOARD_ID_VEXPRESS) {

        /* On VExpress this register will RAZ/WI */

        s->sys_clcd = 0;

    } else {

        /* All others: CLCDID 0x1f, indicating VGA */

        s->sys_clcd = 0x1f00;

    }

}

static uint64_t arm_sysctl_read(void *opaque, hwaddr offset,

                                unsigned size)

{

    arm_sysctl_state *s = (arm_sysctl_state *)opaque;

    switch (offset) {

    case 0x00: /* ID */

        return s->sys_id;

    case 0x04: /* SW */

        /* General purpose hardware switches.

           We don't have a useful way of exposing these to the user.  */

        return 0;

    case 0x08: /* LED */

        return s->leds;

    case 0x20: /* LOCK */

        return s->lockval;

    case 0x0c: /* OSC0 */

    case 0x10: /* OSC1 */

    case 0x14: /* OSC2 */

    case 0x18: /* OSC3 */

    case 0x1c: /* OSC4 */

    case 0x24: /* 100HZ */

        /* ??? Implement these.  */

        return 0;

    case 0x28: /* CFGDATA1 */

        return s->cfgdata1;

    case 0x2c: /* CFGDATA2 */

        return s->cfgdata2;

    case 0x30: /* FLAGS */

        return s->flags;

    case 0x38: /* NVFLAGS */

        return s->nvflags;

    case 0x40: /* RESETCTL */

        if (board_id(s) == BOARD_ID_VEXPRESS) {

            /* reserved: RAZ/WI */

            return 0;

        }

        return s->resetlevel;

    case 0x44: /* PCICTL */

        return 1;

    case 0x48: /* MCI */

        return s->sys_mci;

    case 0x4c: /* FLASH */

        return 0;

    case 0x50: /* CLCD */

        return s->sys_clcd;

    case 0x54: /* CLCDSER */

        return 0;

    case 0x58: /* BOOTCS */

        return 0;

    case 0x5c: /* 24MHz */

        return muldiv64(qemu_get_clock_ns(vm_clock), 24000000, get_ticks_per_sec());

    case 0x60: /* MISC */

        return 0;

    case 0x84: /* PROCID0 */

        return s->proc_id;

    case 0x88: /* PROCID1 */

        return 0xff000000;

    case 0x64: /* DMAPSR0 */

    case 0x68: /* DMAPSR1 */

    case 0x6c: /* DMAPSR2 */

    case 0x70: /* IOSEL */

    case 0x74: /* PLDCTL */

    case 0x80: /* BUSID */

    case 0x8c: /* OSCRESET0 */

    case 0x90: /* OSCRESET1 */

    case 0x94: /* OSCRESET2 */

    case 0x98: /* OSCRESET3 */

    case 0x9c: /* OSCRESET4 */

    case 0xc0: /* SYS_TEST_OSC0 */

    case 0xc4: /* SYS_TEST_OSC1 */

    case 0xc8: /* SYS_TEST_OSC2 */

    case 0xcc: /* SYS_TEST_OSC3 */

    case 0xd0: /* SYS_TEST_OSC4 */

        return 0;

    case 0xa0: /* SYS_CFGDATA */

        if (board_id(s) != BOARD_ID_VEXPRESS) {

            goto bad_reg;

        }

        return s->sys_cfgdata;

    case 0xa4: /* SYS_CFGCTRL */

        if (board_id(s) != BOARD_ID_VEXPRESS) {

            goto bad_reg;

        }

        return s->sys_cfgctrl;

    case 0xa8: /* SYS_CFGSTAT */

        if (board_id(s) != BOARD_ID_VEXPRESS) {

            goto bad_reg;

        }

        return s->sys_cfgstat;

    default:

    bad_reg:

        qemu_log_mask(LOG_GUEST_ERROR,

                      "arm_sysctl_read: Bad register offset 0x%x\n",

                      (int)offset);

        return 0;

    }

}

static void arm_sysctl_write(void *opaque, hwaddr offset,

                             uint64_t val, unsigned size)

{

    arm_sysctl_state *s = (arm_sysctl_state *)opaque;

    switch (offset) {

    case 0x08: /* LED */

        s->leds = val;

        break;

    case 0x0c: /* OSC0 */

    case 0x10: /* OSC1 */

    case 0x14: /* OSC2 */

    case 0x18: /* OSC3 */

    case 0x1c: /* OSC4 */

        /* ??? */

        break;

    case 0x20: /* LOCK */

        if (val == LOCK_VALUE)

            s->lockval = val;

        else

            s->lockval = val & 0x7fff;

        break;

    case 0x28: /* CFGDATA1 */

        /* ??? Need to implement this.  */

        s->cfgdata1 = val;

        break;

    case 0x2c: /* CFGDATA2 */

        /* ??? Need to implement this.  */

        s->cfgdata2 = val;

        break;

    case 0x30: /* FLAGSSET */

        s->flags |= val;

        break;

    case 0x34: /* FLAGSCLR */

        s->flags &= ~val;

        break;

    case 0x38: /* NVFLAGSSET */

        s->nvflags |= val;

        break;

    case 0x3c: /* NVFLAGSCLR */

        s->nvflags &= ~val;

        break;

    case 0x40: /* RESETCTL */

        switch (board_id(s)) {

        case BOARD_ID_PB926:

            if (s->lockval == LOCK_VALUE) {

                s->resetlevel = val;

                if (val & 0x100) {

                    qemu_system_reset_request();

                }

            }

            break;

        case BOARD_ID_PBX:

        case BOARD_ID_PBA8:

            if (s->lockval == LOCK_VALUE) {

                s->resetlevel = val;

                if (val & 0x04) {

                    qemu_system_reset_request();

                }

            }

            break;

        case BOARD_ID_VEXPRESS:

        case BOARD_ID_EB:

        default:

            /* reserved: RAZ/WI */

            break;

        }

        break;

    case 0x44: /* PCICTL */

        /* nothing to do.  */

        break;

    case 0x4c: /* FLASH */

        break;

    case 0x50: /* CLCD */

        switch (board_id(s)) {

        case BOARD_ID_PB926:

            /* On 926 bits 13:8 are R/O, bits 1:0 control

             * the mux that defines how to interpret the PL110

             * graphics format, and other bits are r/w but we

             * don't implement them to do anything.

             */

            s->sys_clcd &= 0x3f00;

            s->sys_clcd |= val & ~0x3f00;

            qemu_set_irq(s->pl110_mux_ctrl, val & 3);

            break;

        case BOARD_ID_EB:

            /* The EB is the same except that there is no mux since

             * the EB has a PL111.

             */

            s->sys_clcd &= 0x3f00;

            s->sys_clcd |= val & ~0x3f00;

            break;

        case BOARD_ID_PBA8:

        case BOARD_ID_PBX:

            /* On PBA8 and PBX bit 7 is r/w and all other bits

             * are either r/o or RAZ/WI.

             */

            s->sys_clcd &= (1 << 7);

            s->sys_clcd |= val & ~(1 << 7);

            break;

        case BOARD_ID_VEXPRESS:

        default:

            /* On VExpress this register is unimplemented and will RAZ/WI */

            break;

        }

        break;

    case 0x54: /* CLCDSER */

    case 0x64: /* DMAPSR0 */

    case 0x68: /* DMAPSR1 */

    case 0x6c: /* DMAPSR2 */

    case 0x70: /* IOSEL */

    case 0x74: /* PLDCTL */

    case 0x80: /* BUSID */

    case 0x84: /* PROCID0 */

    case 0x88: /* PROCID1 */

    case 0x8c: /* OSCRESET0 */

    case 0x90: /* OSCRESET1 */

    case 0x94: /* OSCRESET2 */

    case 0x98: /* OSCRESET3 */

    case 0x9c: /* OSCRESET4 */

        break;

    case 0xa0: /* SYS_CFGDATA */

        if (board_id(s) != BOARD_ID_VEXPRESS) {

            goto bad_reg;

        }

        s->sys_cfgdata = val;

        return;

    case 0xa4: /* SYS_CFGCTRL */

        if (board_id(s) != BOARD_ID_VEXPRESS) {

            goto bad_reg;

        }

        s->sys_cfgctrl = val & ~(3 << 18);

        s->sys_cfgstat = 1;            /* complete */

        switch (s->sys_cfgctrl) {

        case 0xc0800000:            /* SYS_CFG_SHUTDOWN to motherboard */

            qemu_system_shutdown_request();

            break;

        case 0xc0900000:            /* SYS_CFG_REBOOT to motherboard */

            qemu_system_reset_request();

            break;

        default:

            s->sys_cfgstat |= 2;        /* error */

        }

        s->sys_cfgctrl &= ~(1 << 31);

        return;

    case 0xa8: /* SYS_CFGSTAT */

        if (board_id(s) != BOARD_ID_VEXPRESS) {

            goto bad_reg;

        }

        s->sys_cfgstat = val & 3;

        return;

    default:

    bad_reg:

        qemu_log_mask(LOG_GUEST_ERROR,

                      "arm_sysctl_write: Bad register offset 0x%x\n",

                      (int)offset);

        return;

    }

}

static const MemoryRegionOps arm_sysctl_ops = {

    .read = arm_sysctl_read,

    .write = arm_sysctl_write,

    .endianness = DEVICE_NATIVE_ENDIAN,

};

static void arm_sysctl_gpio_set(void *opaque, int line, int level)

{

    arm_sysctl_state *s = (arm_sysctl_state *)opaque;

    switch (line) {

    case ARM_SYSCTL_GPIO_MMC_WPROT:

    {

        /* For PB926 and EB write-protect is bit 2 of SYS_MCI;

         * for all later boards it is bit 1.

         */

        int bit = 2;

        if ((board_id(s) == BOARD_ID_PB926) || (board_id(s) == BOARD_ID_EB)) {

            bit = 4;

        }

        s->sys_mci &= ~bit;

        if (level) {

            s->sys_mci |= bit;

        }

        break;

    }

    case ARM_SYSCTL_GPIO_MMC_CARDIN:

        s->sys_mci &= ~1;

        if (level) {

            s->sys_mci |= 1;

        }

        break;

    }

}

static int arm_sysctl_init(SysBusDevice *dev)

{

    arm_sysctl_state *s = FROM_SYSBUS(arm_sysctl_state, dev);

    memory_region_init_io(&s->iomem, &arm_sysctl_ops, s, "arm-sysctl", 0x1000);

    sysbus_init_mmio(dev, &s->iomem);

    qdev_init_gpio_in(&s->busdev.qdev, arm_sysctl_gpio_set, 2);

    qdev_init_gpio_out(&s->busdev.qdev, &s->pl110_mux_ctrl, 1);

    return 0;

}

static Property arm_sysctl_properties[] = {

    DEFINE_PROP_UINT32("sys_id", arm_sysctl_state, sys_id, 0),

    DEFINE_PROP_UINT32("proc_id", arm_sysctl_state, proc_id, 0),

    DEFINE_PROP_END_OF_LIST(),

};

static void arm_sysctl_class_init(ObjectClass *klass, void *data)

{

    DeviceClass *dc = DEVICE_CLASS(klass);

    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);

    k->init = arm_sysctl_init;

    dc->reset = arm_sysctl_reset;

    dc->vmsd = &vmstate_arm_sysctl;

    dc->props = arm_sysctl_properties;

}

static const TypeInfo arm_sysctl_info = {

    .name          = "realview_sysctl",

    .parent        = TYPE_SYS_BUS_DEVICE,

    .instance_size = sizeof(arm_sysctl_state),

    .class_init    = arm_sysctl_class_init,

};

static void arm_sysctl_register_types(void)

{

    type_register_static(&arm_sysctl_info);

}

type_init(arm_sysctl_register_types)