History | View | Annotate | Download (21.7 kB)
pci: pci.h cleanup: move out stuff not in pci.c
pci.h declares some functions which aren'tdefined in pci.h. Clean up moving thingsto appropriate headers, and update all users.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci: introduce pcibus_t to represent pci bus address/size instead of uint32_t
This patch is preliminary for 64 bit BAR support.Introduce dedicated type, pcibus_t, to represent pci bus address/sizeinstead of uint32_t.Later this type will be changed to uint64_t....
pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.h
make constants for pci base address match pci_regs.h byrenaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Acked-by: Michael S. Tsirkin <mst@redhat.com>...
Sparc64/x86: remove unneeded calls to device reset
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
sparc64: remove unused variables
rom loader: fix sparc -kernel boot.
Changes:(1) register pstrcpy_targphys() in rom list, it is used for kernelcommand lines by a number of architectures.(2) add rom_ptr() function to get a pointer for applying changesto loaded images. Needed for example to tell the linux kernel...
New qdev_init_nofail()
Like qdev_init(), but terminate program via hw_error() instead ofreturning an error value.
Use it instead of qdev_init() where terminating the program on failureis okay, either because it's during machine construction, or because...
Fix pci_add nic not to exit on bad model
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() tocreate the NIC. When MODEL is unknown or "?", this prints to stderrand terminates the program.
Change pci_nic_init() not to treat "?" specially, and to return NULL...
serial: convert isa to qdev
Everything using standard isa I/O ports and IRQ windup is considerdbeing an actual isa device. That are all serial_init() users exceptmips_mipssim() which seems to have a non-standard IRQ windup.
baud rate is fixed at 115200 now as no caller passed in something else....
floppy: add drive properties.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
parallel: convert isa to qdev
Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Somethinglike this must be presented on the list first so people can provide input...
Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the timebeing.
Signed-off-by: malc <av1474@comtv.ru>
Compile loader only once
Callers must pass ELF machine, byte swapping and symbol LSB clearinginformation to ELF loader. A.out loader needs page size information, passthat too as a parameter.
Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw....
Add an ISA bus version of m48t59
Many thanks to Gerd Hoffmann for finding and fixing a bug in the initialversion.
qdev: simplify isa irq assignments
isa-bus owns the isa irqs now, so it can hand them out directly.There is no need for the separate isa_connect_irqs step, drop it.
Also hard-code isa interrupts which can't be configured anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qdev: drop iobase properties from isa bus
Lot of ISA devices work at fixed addresses, so having iobaseas bus property doesn't make much sense. Devices which canhave different iobases will get a device property.
Also simply hard-code stuff which can't be configured anyway....
Sparc64: use ISA bus for i8042
Sparc64: remove unused variables
ide: pass down DriveInfo instead of BlockDriverState
Fix Sparc64 breakage: add dummy ISA irqs
ide: split away ide-pci.c
create ide-pci.c and place pci bus support there.only build ide-pci support for platforms using it.
Fix build (merge with isa mmio split)
qdev: add return value to init() callbacks.
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device initcallbacks can't signal failure because the init() callback has noreturn value. This patch fixes it....
isa bus irq changes and fixes.
Changes:
(1) make isa-bus maintain isa irqs, complain when allocating already taken irqs. (2) note that (1) works only for isa devices converted to qdev already (floppy and ps2/kbd/mouse right now), so more work...
Unbreak Sparc64
EBus is a sort of ISA bus.
qdev/prop: convert sun4u.c to helper macros.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>Message-Id:
Use qemu_irq for system_powerdown
Sparc64: configure screen size from QEMU command line options
Use the FW_CFG interface to send user requested screen size and depth toOpenBIOS like 7f1aec5f93382eef75920899f4065613aeaf02a2 for ppc_oldworld.
kill drives_table
First step cleaning up the drives handling. This one does nothing butremoving drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which handsout DriveInfo pointers instead of a table index. This needs adaption in...
Sparc32/64: use 64 bit type for memory size
Sparc64: refactor kernel init
Sparc64: refactor CPU init
Sparc64: convert memory to qdev
Sparc64: convert boot prom to qdev
Sparc64: convert ebus to qdev
sparc64: really initialize irq
Allocate irq just before passing it to pci bridge initializationand actually use it to initialize pci bridge.
Signed-off-by: igor.v.kovalenko@gmail.com
--Kind regards,Igor V. Kovalenko
Revert "Introduce reset notifier order"
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (andupdates later added users of qemu_register_reset), we solved theproblem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>...
sparc64 follow pci_nic_init change
sun4u.c: correct pci_nic_init arguments followingcommit 5607c38820366954c38dd702e979499486057481
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Rename pci_register_io_region() to pci_register_bar()
This function is used to manage a PCI BAR, so make the more genericpci_register_io_region() available to other uses.
Signed-off-by: Avi Kivity <avi@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use relative path for bios
Look for bios and other support files relative to qemu binary, rather thana hardcoded prefix.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Introduce reset notifier order
Add the parameter 'order' to qemu_register_reset and sort callbacks onregistration. On system reset, callbacks with lower order will beinvoked before those with higher order. Update all existing users to thestandard order 0....
Introduce is_default field for QEMUMachine
f80f9ec changed the order that machines are registered which had the effect ofchanging the default machine. This changeset introduces a new is_default fieldso that machine types can declare that they are the default for an architecture....
Convert machine registration to use module init functions
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace gcc variadic macro extension with C99 version
Remove vga_ram_size
The vga_ram_size argument to machine init functions always has the samevalue, and is ignored by many machines (including SPARC32 which has anobsolete ifdef for VGA_RAM_SIZE).
Remove it and push VGA_RAM_SIZE into vga_int.h.
use PCI_HEADER_TYPE.
use symbolic value instead of 0x0e and related value.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Remove redundant ram_require machine properly.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
Clean up VGA ram allocation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
Remove nodisk_ok machine feature (Jan Kiszka)
All archs have some kind of firmware to load and can be fine with italready. So there is not much use in enforcing the presence of a disk.If the system setup requires one, the user will notice it anyway once...
Use firmware configuration instead of NVRAM (initial patch by Aurelien Jarno)
Use firmware configuration device for boot device, kernel, initrd andkernel command line parameters on PPC, Sparc32 and Sparc64.
Update OpenBIOS images to r479 which supports the change....
Fix sparc64-softmmu breakage from r6711
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6733 c046a42c-6fe2-441c-8c8c-71466251a162
Reload ptimers on reset
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6635 c046a42c-6fe2-441c-8c8c-71466251a162
Add and use #defines for PCI device classes
This patch adds and uses #defines for PCI device classes and subclases,using a new pci_config_set_class() function, similar to the recentlyadded pci_config_set_vendor_id() and pci_config_set_device_id().
Change since v1: fixed compilation of hw/sun4u.c...
Define PCI vendor and device IDs in pci.h (Stuart Brady)
This patch defines PCI vendor and device IDs in pci.h (matching thosefrom Linux's pci_ids.h), and uses those definitions where appropriate.
Change from v1: Introduces pci_config_set_vendor_id() / pci_config_set_device_id()...
Switch to CMD646 IDE
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6361 c046a42c-6fe2-441c-8c8c-71466251a162
graphical_console_init change (Stefano Stabellini)
Patch 5/7
This patch changes the graphical_console_init function to return anallocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few othermodifications mainly in console.c and vl.c....
Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)
Add a table of PCI NIC models to pass to qemu_setup_nic_model().
While we're at it, also add a corresponding table of NIC initfunctions.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>...
Add EBUS bridge
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6266 c046a42c-6fe2-441c-8c8c-71466251a162
Fix APB
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6265 c046a42c-6fe2-441c-8c8c-71466251a162
Implement tick interrupt disable bits
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6122 c046a42c-6fe2-441c-8c8c-71466251a162
Use qemu_ram_alloc
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5630 c046a42c-6fe2-441c-8c8c-71466251a162
More realistic max_cpus
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5604 c046a42c-6fe2-441c-8c8c-71466251a162
Make DMA bottom-half driven (v2)
The current DMA routines are driven by a call in main_loop_wait() after everyselect.
This patch converts the DMA code to be driven by a constantly rescheduledbottom half. The advantage of using a scheduled bottom half is that we can...
machine struct - specify max_cpus at the per machine level (Jes Sorensen)
Introduce a max_cpus per-machine variable, allowing individual boardsto limit it's number of CPUs. Check requested number of CPUs in setupcode and exit if it exceeds the supported number for the machine....
Move nographic export to sysemu.h
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5414 c046a42c-6fe2-441c-8c8c-71466251a162
Rearrange tick functions
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5408 c046a42c-6fe2-441c-8c8c-71466251a162
Add a generic Niagara machine
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5329 c046a42c-6fe2-441c-8c8c-71466251a162
Add software and timer interrupt support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5299 c046a42c-6fe2-441c-8c8c-71466251a162
Add common keys to firmware configuration
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5260 c046a42c-6fe2-441c-8c8c-71466251a162
Key/value based qemu<->guest firmware communication mechanism (Gleb Natapov)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5256 c046a42c-6fe2-441c-8c8c-71466251a162
Fix OpenBSD linker warnings
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5044 c046a42c-6fe2-441c-8c8c-71466251a162
Allow boot without a drive on Sparc machines (partly extracted from Xen)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4997 c046a42c-6fe2-441c-8c8c-71466251a162
Use C99 initializers
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4996 c046a42c-6fe2-441c-8c8c-71466251a162
Add T1 and T2 CPUs, add a Sun4v machine
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4923 c046a42c-6fe2-441c-8c8c-71466251a162
Add idprom
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4870 c046a42c-6fe2-441c-8c8c-71466251a162
Move CPU save/load registration to common code.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4808 c046a42c-6fe2-441c-8c8c-71466251a162
Fix some compiler signed/unsigned char warnings
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4782 c046a42c-6fe2-441c-8c8c-71466251a162
Add support for boot_set command
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4764 c046a42c-6fe2-441c-8c8c-71466251a162
Allow NWINDOWS selection (CPU feature with model specific defaults)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4690 c046a42c-6fe2-441c-8c8c-71466251a162
Remove most uses of phys_ram_base (initial patch by Ian Jackson)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4442 c046a42c-6fe2-441c-8c8c-71466251a162
Wrap long lines
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4440 c046a42c-6fe2-441c-8c8c-71466251a162
Fix compiler warnings
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4404 c046a42c-6fe2-441c-8c8c-71466251a162
Fix Sparc64 serial device breakage
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4339 c046a42c-6fe2-441c-8c8c-71466251a162
Improved large memory support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4292 c046a42c-6fe2-441c-8c8c-71466251a162
Use correct types to enable > 2G support, based on a patch fromAnthony Liguori.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4265 c046a42c-6fe2-441c-8c8c-71466251a162
Fix broken TCX vram, restore Sun4u PROM_SIZE_MAX
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4263 c046a42c-6fe2-441c-8c8c-71466251a162
RAM usage information in machine definition.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4246 c046a42c-6fe2-441c-8c8c-71466251a162
Revert "Use correct types to enable > 2G support" (r4238), it isnot yet ready.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4240 c046a42c-6fe2-441c-8c8c-71466251a162
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4238 c046a42c-6fe2-441c-8c8c-71466251a162
Add -drive parameter, by Laurent Vivier.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162
Remove unused parameters from QEMUMachineInitFunc (Laurent Vivier)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3687 c046a42c-6fe2-441c-8c8c-71466251a162
Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
Update OHW interface to version 3.Use common ABI description file with OpenBIOS.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3648 c046a42c-6fe2-441c-8c8c-71466251a162
Fix Sun4u compile
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3594 c046a42c-6fe2-441c-8c8c-71466251a162
added cpu_model parameter to cpu_init()
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3562 c046a42c-6fe2-441c-8c8c-71466251a162
Set boot sequence from command line (Dan Kenigsberg).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3497 c046a42c-6fe2-441c-8c8c-71466251a162
SuperSparc MXCC support (Robert Reif)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3397 c046a42c-6fe2-441c-8c8c-71466251a162
More detabification
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3338 c046a42c-6fe2-441c-8c8c-71466251a162
New '-bios' option, used to select an alternate BIOS image from bios_dir.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3331 c046a42c-6fe2-441c-8c8c-71466251a162
find -type f | xargs sed -i 's/[\t ]$//g' # on most files
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162