History | View | Annotate | Download (43.2 kB)
pci: fix the conversion of config field from array to pointer
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci: use range helper functions.
clean up pci_default_write_config() by the range helper functions.
Suggested by Michael S. Tsirkin <mst@redhat.com>Cc: Michael S. Tsirkin <mst@redhat.com>Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci: teach pci_default_config_write() ROM bar for normal/bridge device .
When updated ROM expantion address of header type 0, it missedto update mappings.Add PCI_ROM_ADDRESS check whether to call pci_update_mappings()Also update pci mapping when PCI_ROM_ADDRESS1 is written for header type 1....
pci: initialize pci config headers depending it pci header type.
- Only sets default subsystem id for header type 00.(normal header type) because header type 01 doesn't have subsystem id, and uses the register for other purpose. So setting default subsystem id doesn't make sense....
pci: cosmetic on pci_upadte_mappings()
Remove one indentation of pci_update_mappings.Just for cosmetics, no logic change.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci: factor out pci_for_each_device().
split out device iteration logic from pci_for_each_device().factored out function, pci_for_each_device_under_bus() will be used later.
pci: implement pci bridge filtering.
This patch implements pci bridge filtering.
TODO: currently almost all the map funcions assumesfiltered_size size and addr & ~(size - 1) addr.However with bridge filtering, they aren't always true.Teach them such cases, such that filtered_size < size and...
pci/monitor: print out bridge's filtering values and so on.
make pci_info_device() print out bridge's filtering value likeio base/limit, subbus and subordinate bus.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Acked-by: Michael S. Tsirkin <mst@redhat.com>...
pci: 64bit bar support.
implemented pci 64bit bar support.The tricky bit is pci_update_mapping().An OS is allowed to set the BAR such that OS can't address the areapointed by BAR. It doesn't make sense, though.In that case, don't map the BAR.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>...
pci: remove bus_num member from struct PCIBus.
Since It can be retrieved from pci configuration space,the member is unnecessary.
pci: make pci configuration transaction more accurate.
This patch sorts out/enhances pci code to track pci bus topologymore accurately.- Track host bus bridge with pci domain number. Although the current qemu implementation supports only pci domian 0 yet....
pci: factor out the conversion logic from io port address into pci device.
factor out the logic which converts io port address into pci deviceand offset in PCI configuration space.
pci: move pci host stuff from pci.c to pci_host.c
Move pci host stuff from pci.c to pci_host.c.And add some comments.Later pcie host bridge functions will be defined in pcie_host.cnot to bloat pci.c.
pci: pcie host and mmcfg support.
This patch adds common routines for pcie host bridge and pcie mmcfg.This will be used by q35 based chipset emulation.
pci: introduce pcibus_t to represent pci bus address/size instead of uint32_t
This patch is preliminary for 64 bit BAR support.Introduce dedicated type, pcibus_t, to represent pci bus address/sizeinstead of uint32_t.Later this type will be changed to uint64_t....
pci: introduce FMT_PCIBUS for printf format for pcibus_t.
This patch is preliminary for 64bit BAR.Later pcibus_t will be changed from uint32_t to uint64_t.Introduce FMT_PCIBUS for printf format for pcibus_t.
pci: typedef pcibus_t as uint64_t instead of uint32_t.
This patch is preliminary for 64bit bar.For 64bit bar support, change pcibus_t which representspci bus addr/size from uint32_t to uint64_t.And also change FMT_pcibus for printf.
In pci_update_mapping() checks 32bit overflow....
pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.h
make constants for pci base address match pci_regs.h byrenaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx.
pci: clean up of pci_default_read_config.
This patch cleans up pci_default_read_config() removingugly length and range check.
Suggested by "Michael S. Tsirkin" <mst@redhat.com>Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Acked-by: Michael S. Tsirkin <mst@redhat.com>...
pci: make pci_bar() aware of header type 1.
make pci_bar() aware of header type 1. When PCI_ROM_SLOTit should return PCI_ROM_ADDRESS1 (!= PCI_ROM_ADDRESS)
pci: use helper functions to access pci config space.
use pci_[gs]et_{byte, word, long}() to access pci configurationspace.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Acked-by: Michael S. Tsirkin <mst@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci/bridge: clean up of pci_bridge_initfn()
- use symbolic constant- use helper function pci_set_xxx()- removed lines which initializes to 0. It is unnecessary because it is already zeroed.- add some comments on command registers.
Some initial values are suspicious because they seems to...
pci: clean up pci_init_wmask()
use pci_set_word() for pci command register.
pci: fix PCI_DPRINTF() wrt variadic macro.
add missing ## in PCI_DPRINTF() to compile.
pci: introduce constant PCI_NUM_PINS for the number of interrupt pins, 4.
introduce constant PCI_NUM_PINS for the number of interrupt pins, 4.and use it.
pci: use PCI_SLOT() and PCI_FUNC().
use PCI_SLOT() and PCI_FUNC() where appropriate instead ofdirect use of bit operation.
pci: define a constant to represent a unmapped bar and use it.
define a constant to represent a unmapped bar instead of -1 and use it.
vmstate: Unfold VMSTATE_INT32_VARRAY() only use and remove it
zap DeviceState->nd
No users left.Also cleanup obsolete helper functions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
prepare pci nic init path for qdev property configuration.
Initialization path will work with both converted and not-converteddrivers, so we can convert drivers one by one.
net: remove id field from NICInfo
Just use the name field instead since we now use the id paramater asthe name, if supplied. Only implication with this change is that ifid is not supplied, the value of the name paramater is used as anid.
Patchworks-ID: 35512...
Check return value of qdev_init()
But do so only where it may actually fail. Leave the rest for thenext commit.
Patchworks-ID: 35167Signed-off-by: Markus Armbruster <armbru@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New qdev_init_nofail()
Like qdev_init(), but terminate program via hw_error() instead ofreturning an error value.
Use it instead of qdev_init() where terminating the program on failureis okay, either because it's during machine construction, or because...
qemu/pci: clarify pci config load routine
PCI load routine has to be called with size equal to 256 (otherwise itwill crash in weird ways). So assert this, making code clearer.Also avoid dynamically sized array on stack - good for portability.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>...
qemu/pci: make pci not depend on msix
Making pci device cleanup msix automatically makes pci.c depend onmsix.c, which is IMO messy. Since devices do msix_init it's easy andnatural for them to also do msix_uninit.
Revert "Fix exit on 'pci_add' Monitor command"
This reverts commit 0148fde54c2478ea8a47c8dbfe4c0fb8bda4d996.
As requested by Luiz.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix pci_add storage not to exit on bad first argument
Monitor command "pci_add ADDR storage ..." does its work inqemu_pci_hot_add_nic(). It called pci_create(..., ADDR) to create thedevice. That's wrong, because pci_create() terminates the programwhen ADDR is invalid....
Make it obvious that pci_nic_init() can't fail
Before this patch, pci_nic_init() returns NULL when it can't find themodel in pci_nic_models[]. Except this can't happen, becauseqemu_check_nic_model_list() just searched for model inpci_nic_models[], and terminated the program on failure....
Fix pci_add nic not to exit on bad model
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() tocreate the NIC. When MODEL is unknown or "?", this prints to stderrand terminates the program.
Change pci_nic_init() not to treat "?" specially, and to return NULL...
pci_create() is now unused, remove it
Signed-off-by: Markus Armbruster <armbru@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rename pci_create_noinit() to pci_create()
It's qdev_create() specialized for PCI, so name it accordingly.
qemu/pci: refactor code/symbolic constants
refactor code slightly, adding symbolic constants and functions, andusing macros where possible. This will also make following resetpatches easier.
No functional changes.
qemu/pci: reset device registers on bus reset
Reset BARs and a couple of other registers on bus reset, as per PCIspec.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci: hotplug windup
Create qdev infrastructure for pci hotplug. PCI bus implementationsmust register a handler for hotplug. Creating a new PCI device willautomagically hot-plug it in case the PCI bus in question supports this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>...
pci: use qdev for device destruction.
pci_unregister_device is static now and hooked into Devicestate->exit.qdev_free(pci_device) works now.
pci: move unregister from PCIDevice to PCIDeviceInfo
One more cleanup while being at it ;)
support inplace allocation for pci bus, split irq init.
convert pci bridge to qdev
Fix exit on 'pci_add' Monitor command
If the user issues one of the following commands to the Monitor:
pci_add pci_addr=auto nic model=Nonepci_add pci_addr=auto nic model=?
QEMU will exit, because the function used to perform sanitychecks (qemu_check_nic_model_list()) exits on error....
vmstate: remove const for put operations
In a later patch, we introduce pre_save() and post_save() functions.The whole point of that operation is to change things in the state.Without this patch, we have to remove the const qualifier in eachuse with a cast...
Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Somethinglike this must be presented on the list first so people can provide input...
Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the timebeing.
Signed-off-by: malc <av1474@comtv.ru>
qdev/pci: add pci_create_noinit()
Like pci_create_simple() but doesn't call qdev_init(), so one canset properties before initializing the device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We want the argument pass to set_irq to be opaque
piix_pci want to pass more things that the pic
low_set_irq is not used anywhere
Add pci_ne2000_{save/load} functions, then remove pci_dev NE2000State field
qdev: add return value to init() callbacks.
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device initcallbacks can't signal failure because the init() callback has noreturn value. This patch fixes it....
Port PCI Bus to VMState design
This uses VARRAY and INT32_EQUAL values
Add version_id to PCIDevice.
It is needed for VMState
Port PCIDevice state to VMState
This uses a variant of buffer, with extra checks. Also uses the newsupport for cheking that a read value is less or equal than a field.
qdev/prop: convert pci.c to helper macros.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>Message-Id:
qdev/pci: use qdev_prop_pci_devfn
Put the new property into use.
Sparc64: convert APB to qdev
Thanks to Igor Kovalenko for a bugfix.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qdev: add id= support for pci nics.
qdev: print device id in "info pci".
qdev: rework device properties.
This patch is a major overhaul of the device properties. The propertiesare saved directly in the device state struct now, the linked list ofproperty values is gone.
Advantages: * We don't have to maintain the list with the property values....
pci.c: remove unnecessary #ifdef DEBUG_PCI.
remove unnecessary #ifdef DEBUG_PCI.
Fix PCI IRQ breakage
Zero initialize the PCI bus irq count.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Fix APB by reverting 16eaedf2668e9b347a59d73346fcc4c764c58348 partially
qdev: replace bus_type enum with bus_info struct.
BusInfo is filled with name and size (pretty much like I did forDeviceInfo as well). There is also a function pointer to printbus-specific device information to the monitor. sysbus is hookedup there, I've also added a print function for PCI....
qdev/pci: misc fixes.
qdev: update pci device registration.
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunchof parameters. Also adds config_read and config_write callbacks toPCIDeviceInfo, so drivers needing these can be converted to the qdevdevice API too....
Revert "Introduce reset notifier order"
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (andupdates later added users of qemu_register_reset), we solved theproblem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>...
monitor: Drop pci_addr prefix from hotplug commands
The "pci_addr=" prefix currently required by pci_add/remove anddrive_add has no practical use. Drop it, but still silently accept itfor backward compatibility.
qemu/pci: make default_write_config use mask table
Change much of hw/pci to use symbolic constants and a table-drivendesign: add a mask table with writable bits set and readonly bits unset.Detect change by comparing original and new registers.
This makes it easy to support capabilities where read-only/writeable...
qemu/pci: add routines to manage PCI capabilities
Add routines to manage PCI capability list. First user will be MSI-X.
qemu/pci: check constant registers on load
Add "cmask" table of constant register masks: if a bit is not writeableand is set in cmask table, this bit is checked on load. An attempt toload an image that would change such a register causes load to fail....
Fix do_pci_register_device() to reject devfn already in use
Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into structNICinfo. Use it in pci_nic_init(), and remove arguments bus anddevfn.
Don't support addr= in third argument of monitor command pci_add,because that clashes with its first argument. Admittedly unelegant....
Make first argument of monitor command pci_add work
Simply pass the PCI address through qemu_pci_hot_add_nic() topci_nic_init() and through qemu_pci_hot_add_storage() to pci_create().
Before, pci_device_hot_add() passed along the PCI bus to use, andignored any user-specified slot....
Add pci_bus_reset() function.
To reset internal irq handling data structures.
Signed-off-by: Gleb Natapov <gleb@redhat.com>Signed-off-by: Yaniv Kamay <ykamay@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rename pci_register_io_region() to pci_register_bar()
This function is used to manage a PCI BAR, so make the more genericpci_register_io_region() available to other uses.
Signed-off-by: Avi Kivity <avi@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev: move name+size into DeviceInfo (v2)
Rationale: move device information from code to data structures.
v2: Adapt the drivers missed in the first version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove unused and misnamed field and variable
Add common BusState
Implement and use a common device bus state. The main side-effect isthat creating a bus and attaching it to a parent device are no longerseparate operations. For legacy code we allow a NULL parent, but thatshould go away eventually....
Separate virtio PCI code
Split the PCI host bindings from the VRing transport implementation.
PCI qdev support
PCI network qdev conversion
Virtio-net qdev conversion
minor fix of pci_register_bus()
keep first_bus linked list correct.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
use PCI_HEADER_TYPE.
use symbolic value instead of 0x0e and related value.
Make PCI config status register read-only
From the documentation I can find, this register is supposed to be read-only.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7070 c046a42c-6fe2-441c-8c8c-71466251a162
monitor: Rework API (Jan Kiszka)
Refactor the monitor API and prepare it for decoupled terminals:term_print functions are renamed to monitor_* and all monitor servicesgain a new parameter (mon) that will once refer to the monitor instancethe output is supposed to appear on. However, the argument remains...
Parse full PCI device addresses (Markus Armbruster)
This code parses full PCI device addresses. It then rejects domainsother than zero, because these are not supported in QEMU.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>...
qemu: warn if PCI region is not power of two (Marcelo Tosatti)
Otherwise the PCI size for such regions can be calculated erroneously.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6604 c046a42c-6fe2-441c-8c8c-71466251a162
qemu: add pci_unregister_device (Marcelo Tosatti)
Unregister the pci device, unassign its IO and memory regions, and freeassociated data.
Add a callback so drivers can free device state.
qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)
Change the PCI network drivers init functions to return the PCIDev, toinform which slot has been hot-plugged.
Also record PCIDevice structure on NICInfo to locate for release on...
qemu: add pci helper functions (Marcelo Tosatti)
Add pci_find_bus/pci_find_device to be used by PCI hotplug.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6592 c046a42c-6fe2-441c-8c8c-71466251a162
hw: remove error handling from qemu_malloc() callers (Avi Kivity)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
Add and use #defines for PCI device classes
This patch adds and uses #defines for PCI device classes and subclases,using a new pci_config_set_class() function, similar to the recentlyadded pci_config_set_vendor_id() and pci_config_set_device_id().
Change since v1: fixed compilation of hw/sun4u.c...