Archipelago » qemu

/*

 * TI TSC2102 (touchscreen/sensors/audio controller) emulator.

 * TI TSC2301 (touchscreen/sensors/keypad).

 *

 * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>

 * Copyright (C) 2008 Nokia Corporation

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License as

 * published by the Free Software Foundation; either version 2 or

 * (at your option) version 3 of the License.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License along

 * with this program; if not, write to the Free Software Foundation, Inc.,

 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

 */

#include "hw.h"

#include "audio/audio.h"

#include "qemu-timer.h"

#include "console.h"

#include "omap.h"        /* For I2SCodec and uWireSlave */

#include "devices.h"

#define TSC_DATA_REGISTERS_PAGE                0x0

#define TSC_CONTROL_REGISTERS_PAGE        0x1

#define TSC_AUDIO_REGISTERS_PAGE        0x2

#define TSC_VERBOSE

#define TSC_CUT_RESOLUTION(value, p)        ((value) >> (16 - resolution[p]))

typedef struct {

    qemu_irq pint;

    qemu_irq kbint;

    qemu_irq davint;

    QEMUTimer *timer;

    QEMUSoundCard card;

    uWireSlave chip;

    I2SCodec codec;

    uint8_t in_fifo[16384];

    uint8_t out_fifo[16384];

    uint16_t model;

    int x, y;

    int pressure;

    int state, page, offset, irq;

    uint16_t command, dav;

    int busy;

    int enabled;

    int host_mode;

    int function;

    int nextfunction;

    int precision;

    int nextprecision;

    int filter;

    int pin_func;

    int ref;

    int timing;

    int noise;

    uint16_t audio_ctrl1;

    uint16_t audio_ctrl2;

    uint16_t audio_ctrl3;

    uint16_t pll[3];

    uint16_t volume;

    int64_t volume_change;

    int softstep;

    uint16_t dac_power;

    int64_t powerdown;

    uint16_t filter_data[0x14];

    const char *name;

    SWVoiceIn *adc_voice[1];

    SWVoiceOut *dac_voice[1];

    int i2s_rx_rate;

    int i2s_tx_rate;

    int tr[8];

    struct {

        uint16_t down;

        uint16_t mask;

        int scan;

        int debounce;

        int mode;

        int intr;

    } kb;

} TSC210xState;

static const int resolution[4] = { 12, 8, 10, 12 };

#define TSC_MODE_NO_SCAN        0x0

#define TSC_MODE_XY_SCAN        0x1

#define TSC_MODE_XYZ_SCAN        0x2

#define TSC_MODE_X                0x3

#define TSC_MODE_Y                0x4

#define TSC_MODE_Z                0x5

#define TSC_MODE_BAT1                0x6

#define TSC_MODE_BAT2                0x7

#define TSC_MODE_AUX                0x8

#define TSC_MODE_AUX_SCAN        0x9

#define TSC_MODE_TEMP1                0xa

#define TSC_MODE_PORT_SCAN        0xb

#define TSC_MODE_TEMP2                0xc

#define TSC_MODE_XX_DRV                0xd

#define TSC_MODE_YY_DRV                0xe

#define TSC_MODE_YX_DRV                0xf

static const uint16_t mode_regs[16] = {

    0x0000,        /* No scan */

    0x0600,        /* X, Y scan */

    0x0780,        /* X, Y, Z scan */

    0x0400,        /* X */

    0x0200,        /* Y */

    0x0180,        /* Z */

    0x0040,        /* BAT1 */

    0x0030,        /* BAT2 */

    0x0010,        /* AUX */

    0x0010,        /* AUX scan */

    0x0004,        /* TEMP1 */

    0x0070,        /* Port scan */

    0x0002,        /* TEMP2 */

    0x0000,        /* X+, X- drivers */

    0x0000,        /* Y+, Y- drivers */

    0x0000,        /* Y+, X- drivers */

};

#define X_TRANSFORM(s)                        \

    ((s->y * s->tr[0] - s->x * s->tr[1]) / s->tr[2] + s->tr[3])

#define Y_TRANSFORM(s)                        \

    ((s->y * s->tr[4] - s->x * s->tr[5]) / s->tr[6] + s->tr[7])

#define Z1_TRANSFORM(s)                        \

    ((400 - ((s)->x >> 7) + ((s)->pressure << 10)) << 4)

#define Z2_TRANSFORM(s)                        \

    ((4000 + ((s)->y >> 7) - ((s)->pressure << 10)) << 4)

#define BAT1_VAL                        0x8660

#define BAT2_VAL                        0x0000

#define AUX1_VAL                        0x35c0

#define AUX2_VAL                        0xffff

#define TEMP1_VAL                        0x8c70

#define TEMP2_VAL                        0xa5b0

#define TSC_POWEROFF_DELAY                50

#define TSC_SOFTSTEP_DELAY                50

static void tsc210x_reset(TSC210xState *s)

{

    s->state = 0;

    s->pin_func = 2;

    s->enabled = 0;

    s->busy = 0;

    s->nextfunction = 0;

    s->ref = 0;

    s->timing = 0;

    s->irq = 0;

    s->dav = 0;

    s->audio_ctrl1 = 0x0000;

    s->audio_ctrl2 = 0x4410;

    s->audio_ctrl3 = 0x0000;

    s->pll[0] = 0x1004;

    s->pll[1] = 0x0000;

    s->pll[2] = 0x1fff;

    s->volume = 0xffff;

    s->dac_power = 0x8540;

    s->softstep = 1;

    s->volume_change = 0;

    s->powerdown = 0;

    s->filter_data[0x00] = 0x6be3;

    s->filter_data[0x01] = 0x9666;

    s->filter_data[0x02] = 0x675d;

    s->filter_data[0x03] = 0x6be3;

    s->filter_data[0x04] = 0x9666;

    s->filter_data[0x05] = 0x675d;

    s->filter_data[0x06] = 0x7d83;

    s->filter_data[0x07] = 0x84ee;

    s->filter_data[0x08] = 0x7d83;

    s->filter_data[0x09] = 0x84ee;

    s->filter_data[0x0a] = 0x6be3;

    s->filter_data[0x0b] = 0x9666;

    s->filter_data[0x0c] = 0x675d;

    s->filter_data[0x0d] = 0x6be3;

    s->filter_data[0x0e] = 0x9666;

    s->filter_data[0x0f] = 0x675d;

    s->filter_data[0x10] = 0x7d83;

    s->filter_data[0x11] = 0x84ee;

    s->filter_data[0x12] = 0x7d83;

    s->filter_data[0x13] = 0x84ee;

    s->i2s_tx_rate = 0;

    s->i2s_rx_rate = 0;

    s->kb.scan = 1;

    s->kb.debounce = 0;

    s->kb.mask = 0x0000;

    s->kb.mode = 3;

    s->kb.intr = 0;

    qemu_set_irq(s->pint, !s->irq);

    qemu_set_irq(s->davint, !s->dav);

    qemu_irq_raise(s->kbint);

}

typedef struct {

    int rate;

    int dsor;

    int fsref;

} TSC210xRateInfo;

/*  { rate,  dsor,  fsref } */

static const TSC210xRateInfo tsc2101_rates[] = {

    /* Fsref / 6.0 */

    { 7350,        7,        1 },

    { 8000,        7,        0 },

    /* Fsref / 5.5 */

    { 8018,        6,        1 },

    { 8727,        6,        0 },

    /* Fsref / 5.0 */

    { 8820,        5,        1 },

    { 9600,        5,        0 },

    /* Fsref / 4.0 */

    { 11025,        4,        1 },

    { 12000,        4,        0 },

    /* Fsref / 3.0 */

    { 14700,        3,        1 },

    { 16000,        3,        0 },

    /* Fsref / 2.0 */

    { 22050,        2,        1 },

    { 24000,        2,        0 },

    /* Fsref / 1.5 */

    { 29400,        1,        1 },

    { 32000,        1,        0 },

    /* Fsref */

    { 44100,        0,        1 },

    { 48000,        0,        0 },

    { 0,        0,         0 },

};

/*  { rate,   dsor, fsref }        */

static const TSC210xRateInfo tsc2102_rates[] = {

    /* Fsref / 6.0 */

    { 7350,        63,        1 },

    { 8000,        63,        0 },

    /* Fsref / 6.0 */

    { 7350,        54,        1 },

    { 8000,        54,        0 },

    /* Fsref / 5.0 */

    { 8820,        45,        1 },

    { 9600,        45,        0 },

    /* Fsref / 4.0 */

    { 11025,        36,        1 },

    { 12000,        36,        0 },

    /* Fsref / 3.0 */

    { 14700,        27,        1 },

    { 16000,        27,        0 },

    /* Fsref / 2.0 */

    { 22050,        18,        1 },

    { 24000,        18,        0 },

    /* Fsref / 1.5 */

    { 29400,        9,        1 },

    { 32000,        9,        0 },

    /* Fsref */

    { 44100,        0,        1 },

    { 48000,        0,        0 },

    { 0,        0,         0 },

};

static inline void tsc210x_out_flush(TSC210xState *s, int len)

{

    uint8_t *data = s->codec.out.fifo + s->codec.out.start;

    uint8_t *end = data + len;

    while (data < end)

        data += AUD_write(s->dac_voice[0], data, end - data) ?: (end - data);

    s->codec.out.len -= len;

    if (s->codec.out.len)

        memmove(s->codec.out.fifo, end, s->codec.out.len);

    s->codec.out.start = 0;

}

static void tsc210x_audio_out_cb(TSC210xState *s, int free_b)

{

    if (s->codec.out.len >= free_b) {

        tsc210x_out_flush(s, free_b);

        return;

    }

    s->codec.out.size = MIN(free_b, 16384);

    qemu_irq_raise(s->codec.tx_start);

}

static void tsc2102_audio_rate_update(TSC210xState *s)

{

    const TSC210xRateInfo *rate;

    s->codec.tx_rate = 0;

    s->codec.rx_rate = 0;

    if (s->dac_power & (1 << 15))                                /* PWDNC */

        return;

    for (rate = tsc2102_rates; rate->rate; rate ++)

        if (rate->dsor == (s->audio_ctrl1 & 0x3f) &&                /* DACFS */

                        rate->fsref == ((s->audio_ctrl3 >> 13) & 1))/* REFFS */

            break;

    if (!rate->rate) {

        printf("%s: unknown sampling rate configured\n", __FUNCTION__);

        return;

    }

    s->codec.tx_rate = rate->rate;

}

static void tsc2102_audio_output_update(TSC210xState *s)

{

    int enable;

    struct audsettings fmt;

    if (s->dac_voice[0]) {

        tsc210x_out_flush(s, s->codec.out.len);

        s->codec.out.size = 0;

        AUD_set_active_out(s->dac_voice[0], 0);

        AUD_close_out(&s->card, s->dac_voice[0]);

        s->dac_voice[0] = 0;

    }

    s->codec.cts = 0;

    enable =

            (~s->dac_power & (1 << 15)) &&                        /* PWDNC */

            (~s->dac_power & (1 << 10));                        /* DAPWDN */

    if (!enable || !s->codec.tx_rate)

        return;

    /* Force our own sampling rate even in slave DAC mode */

    fmt.endianness = 0;

    fmt.nchannels = 2;

    fmt.freq = s->codec.tx_rate;

    fmt.fmt = AUD_FMT_S16;

    s->dac_voice[0] = AUD_open_out(&s->card, s->dac_voice[0],

                    "tsc2102.sink", s, (void *) tsc210x_audio_out_cb, &fmt);

    if (s->dac_voice[0]) {

        s->codec.cts = 1;

        AUD_set_active_out(s->dac_voice[0], 1);

    }

}

static uint16_t tsc2102_data_register_read(TSC210xState *s, int reg)

{

    switch (reg) {

    case 0x00:        /* X */

        s->dav &= 0xfbff;

        return TSC_CUT_RESOLUTION(X_TRANSFORM(s), s->precision) +

                (s->noise & 3);

    case 0x01:        /* Y */

        s->noise ++;

        s->dav &= 0xfdff;

        return TSC_CUT_RESOLUTION(Y_TRANSFORM(s), s->precision) ^

                (s->noise & 3);

    case 0x02:        /* Z1 */

        s->dav &= 0xfeff;

        return TSC_CUT_RESOLUTION(Z1_TRANSFORM(s), s->precision) -

                (s->noise & 3);

    case 0x03:        /* Z2 */

        s->dav &= 0xff7f;

        return TSC_CUT_RESOLUTION(Z2_TRANSFORM(s), s->precision) |

                (s->noise & 3);

    case 0x04:        /* KPData */

        if ((s->model & 0xff00) == 0x2300) {

            if (s->kb.intr && (s->kb.mode & 2)) {

                s->kb.intr = 0;

                qemu_irq_raise(s->kbint);

            }

            return s->kb.down;

        }

        return 0xffff;

    case 0x05:        /* BAT1 */

        s->dav &= 0xffbf;

        return TSC_CUT_RESOLUTION(BAT1_VAL, s->precision) +

                (s->noise & 6);

    case 0x06:        /* BAT2 */

        s->dav &= 0xffdf;

        return TSC_CUT_RESOLUTION(BAT2_VAL, s->precision);

    case 0x07:        /* AUX1 */

        s->dav &= 0xffef;

        return TSC_CUT_RESOLUTION(AUX1_VAL, s->precision);

    case 0x08:        /* AUX2 */

        s->dav &= 0xfff7;

        return 0xffff;

    case 0x09:        /* TEMP1 */

        s->dav &= 0xfffb;

        return TSC_CUT_RESOLUTION(TEMP1_VAL, s->precision) -

                (s->noise & 5);

    case 0x0a:        /* TEMP2 */

        s->dav &= 0xfffd;

        return TSC_CUT_RESOLUTION(TEMP2_VAL, s->precision) ^

                (s->noise & 3);

    case 0x0b:        /* DAC */

        s->dav &= 0xfffe;

        return 0xffff;

    default:

#ifdef TSC_VERBOSE

        fprintf(stderr, "tsc2102_data_register_read: "

                        "no such register: 0x%02x\n", reg);

#endif

        return 0xffff;

    }

}

static uint16_t tsc2102_control_register_read(

                TSC210xState *s, int reg)

{

    switch (reg) {

    case 0x00:        /* TSC ADC */

        return (s->pressure << 15) | ((!s->busy) << 14) |

                (s->nextfunction << 10) | (s->nextprecision << 8) | s->filter; 

    case 0x01:        /* Status / Keypad Control */

        if ((s->model & 0xff00) == 0x2100)

            return (s->pin_func << 14) | ((!s->enabled) << 13) |

                    (s->host_mode << 12) | ((!!s->dav) << 11) | s->dav;

        else

            return (s->kb.intr << 15) | ((s->kb.scan || !s->kb.down) << 14) |

                    (s->kb.debounce << 11);

    case 0x02:        /* DAC Control */

        if ((s->model & 0xff00) == 0x2300)

            return s->dac_power & 0x8000;

        else

            goto bad_reg;

    case 0x03:        /* Reference */

        return s->ref;

    case 0x04:        /* Reset */

        return 0xffff;

    case 0x05:        /* Configuration */

        return s->timing;

    case 0x06:        /* Secondary configuration */

        if ((s->model & 0xff00) == 0x2100)

            goto bad_reg;

        return ((!s->dav) << 15) | ((s->kb.mode & 1) << 14) | s->pll[2];

    case 0x10:        /* Keypad Mask */

        if ((s->model & 0xff00) == 0x2100)

            goto bad_reg;

        return s->kb.mask;

    default:

    bad_reg:

#ifdef TSC_VERBOSE

        fprintf(stderr, "tsc2102_control_register_read: "

                        "no such register: 0x%02x\n", reg);

#endif

        return 0xffff;

    }

}

static uint16_t tsc2102_audio_register_read(TSC210xState *s, int reg)

{

    int l_ch, r_ch;

    uint16_t val;

    switch (reg) {

    case 0x00:        /* Audio Control 1 */

        return s->audio_ctrl1;

    case 0x01:

        return 0xff00;

    case 0x02:        /* DAC Volume Control */

        return s->volume;

    case 0x03:

        return 0x8b00;

    case 0x04:        /* Audio Control 2 */

        l_ch = 1;

        r_ch = 1;

        if (s->softstep && !(s->dac_power & (1 << 10))) {

            l_ch = (qemu_get_clock(vm_clock) >

                            s->volume_change + TSC_SOFTSTEP_DELAY);

            r_ch = (qemu_get_clock(vm_clock) >

                            s->volume_change + TSC_SOFTSTEP_DELAY);

        }

        return s->audio_ctrl2 | (l_ch << 3) | (r_ch << 2);

    case 0x05:        /* Stereo DAC Power Control */

        return 0x2aa0 | s->dac_power |

                (((s->dac_power & (1 << 10)) &&

                  (qemu_get_clock(vm_clock) >

                   s->powerdown + TSC_POWEROFF_DELAY)) << 6);

    case 0x06:        /* Audio Control 3 */

        val = s->audio_ctrl3 | 0x0001;

        s->audio_ctrl3 &= 0xff3f;

        return val;

    case 0x07:        /* LCH_BASS_BOOST_N0 */

    case 0x08:        /* LCH_BASS_BOOST_N1 */

    case 0x09:        /* LCH_BASS_BOOST_N2 */

    case 0x0a:        /* LCH_BASS_BOOST_N3 */

    case 0x0b:        /* LCH_BASS_BOOST_N4 */

    case 0x0c:        /* LCH_BASS_BOOST_N5 */

    case 0x0d:        /* LCH_BASS_BOOST_D1 */

    case 0x0e:        /* LCH_BASS_BOOST_D2 */

    case 0x0f:        /* LCH_BASS_BOOST_D4 */

    case 0x10:        /* LCH_BASS_BOOST_D5 */

    case 0x11:        /* RCH_BASS_BOOST_N0 */

    case 0x12:        /* RCH_BASS_BOOST_N1 */

    case 0x13:        /* RCH_BASS_BOOST_N2 */

    case 0x14:        /* RCH_BASS_BOOST_N3 */

    case 0x15:        /* RCH_BASS_BOOST_N4 */

    case 0x16:        /* RCH_BASS_BOOST_N5 */

    case 0x17:        /* RCH_BASS_BOOST_D1 */

    case 0x18:        /* RCH_BASS_BOOST_D2 */

    case 0x19:        /* RCH_BASS_BOOST_D4 */

    case 0x1a:        /* RCH_BASS_BOOST_D5 */

        return s->filter_data[reg - 0x07];

    case 0x1b:        /* PLL Programmability 1 */

        return s->pll[0];

    case 0x1c:        /* PLL Programmability 2 */

        return s->pll[1];

    case 0x1d:        /* Audio Control 4 */

        return (!s->softstep) << 14;

    default:

#ifdef TSC_VERBOSE

        fprintf(stderr, "tsc2102_audio_register_read: "

                        "no such register: 0x%02x\n", reg);

#endif

        return 0xffff;

    }

}

static void tsc2102_data_register_write(

                TSC210xState *s, int reg, uint16_t value)

{

    switch (reg) {

    case 0x00:        /* X */

    case 0x01:        /* Y */

    case 0x02:        /* Z1 */

    case 0x03:        /* Z2 */

    case 0x05:        /* BAT1 */

    case 0x06:        /* BAT2 */

    case 0x07:        /* AUX1 */

    case 0x08:        /* AUX2 */

    case 0x09:        /* TEMP1 */

    case 0x0a:        /* TEMP2 */

        return;

    default:

#ifdef TSC_VERBOSE

        fprintf(stderr, "tsc2102_data_register_write: "

                        "no such register: 0x%02x\n", reg);

#endif

    }

}

static void tsc2102_control_register_write(

                TSC210xState *s, int reg, uint16_t value)

{

    switch (reg) {

    case 0x00:        /* TSC ADC */

        s->host_mode = value >> 15;

        s->enabled = !(value & 0x4000);

        if (s->busy && !s->enabled)

            qemu_del_timer(s->timer);

        s->busy &= s->enabled;

        s->nextfunction = (value >> 10) & 0xf;

        s->nextprecision = (value >> 8) & 3;

        s->filter = value & 0xff;

        return;

    case 0x01:        /* Status / Keypad Control */

        if ((s->model & 0xff00) == 0x2100)

            s->pin_func = value >> 14;

        else {

            s->kb.scan = (value >> 14) & 1;

            s->kb.debounce = (value >> 11) & 7;

            if (s->kb.intr && s->kb.scan) {

                s->kb.intr = 0;

                qemu_irq_raise(s->kbint);

            }

        }

        return;

    case 0x02:        /* DAC Control */

        if ((s->model & 0xff00) == 0x2300) {

            s->dac_power &= 0x7fff;

            s->dac_power |= 0x8000 & value;

        } else

            goto bad_reg;

        break;

    case 0x03:        /* Reference */

        s->ref = value & 0x1f;

        return;

    case 0x04:        /* Reset */

        if (value == 0xbb00) {

            if (s->busy)

                qemu_del_timer(s->timer);

            tsc210x_reset(s);

#ifdef TSC_VERBOSE

        } else {

            fprintf(stderr, "tsc2102_control_register_write: "

                            "wrong value written into RESET\n");

#endif

        }

        return;

    case 0x05:        /* Configuration */

        s->timing = value & 0x3f;

#ifdef TSC_VERBOSE

        if (value & ~0x3f)

            fprintf(stderr, "tsc2102_control_register_write: "

                            "wrong value written into CONFIG\n");

#endif

        return;

    case 0x06:        /* Secondary configuration */

        if ((s->model & 0xff00) == 0x2100)

            goto bad_reg;

        s->kb.mode = value >> 14;

        s->pll[2] = value & 0x3ffff;

        return;

    case 0x10:        /* Keypad Mask */

        if ((s->model & 0xff00) == 0x2100)

            goto bad_reg;

        s->kb.mask = value;

        return;

    default:

    bad_reg:

#ifdef TSC_VERBOSE

        fprintf(stderr, "tsc2102_control_register_write: "

                        "no such register: 0x%02x\n", reg);

#endif

    }

}

static void tsc2102_audio_register_write(

                TSC210xState *s, int reg, uint16_t value)

{

    switch (reg) {

    case 0x00:        /* Audio Control 1 */

        s->audio_ctrl1 = value & 0x0f3f;

#ifdef TSC_VERBOSE

        if ((value & ~0x0f3f) || ((value & 7) != ((value >> 3) & 7)))

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into Audio 1\n");

#endif

        tsc2102_audio_rate_update(s);

        tsc2102_audio_output_update(s);

        return;

    case 0x01:

#ifdef TSC_VERBOSE

        if (value != 0xff00)

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into reg 0x01\n");

#endif

        return;

    case 0x02:        /* DAC Volume Control */

        s->volume = value;

        s->volume_change = qemu_get_clock(vm_clock);

        return;

    case 0x03:

#ifdef TSC_VERBOSE

        if (value != 0x8b00)

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into reg 0x03\n");

#endif

        return;

    case 0x04:        /* Audio Control 2 */

        s->audio_ctrl2 = value & 0xf7f2;

#ifdef TSC_VERBOSE

        if (value & ~0xf7fd)

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into Audio 2\n");

#endif

        return;

    case 0x05:        /* Stereo DAC Power Control */

        if ((value & ~s->dac_power) & (1 << 10))

            s->powerdown = qemu_get_clock(vm_clock);

        s->dac_power = value & 0x9543;

#ifdef TSC_VERBOSE

        if ((value & ~0x9543) != 0x2aa0)

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into Power\n");

#endif

        tsc2102_audio_rate_update(s);

        tsc2102_audio_output_update(s);

        return;

    case 0x06:        /* Audio Control 3 */

        s->audio_ctrl3 &= 0x00c0;

        s->audio_ctrl3 |= value & 0xf800;

#ifdef TSC_VERBOSE

        if (value & ~0xf8c7)

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into Audio 3\n");

#endif

        tsc2102_audio_output_update(s);

        return;

    case 0x07:        /* LCH_BASS_BOOST_N0 */

    case 0x08:        /* LCH_BASS_BOOST_N1 */

    case 0x09:        /* LCH_BASS_BOOST_N2 */

    case 0x0a:        /* LCH_BASS_BOOST_N3 */

    case 0x0b:        /* LCH_BASS_BOOST_N4 */

    case 0x0c:        /* LCH_BASS_BOOST_N5 */

    case 0x0d:        /* LCH_BASS_BOOST_D1 */

    case 0x0e:        /* LCH_BASS_BOOST_D2 */

    case 0x0f:        /* LCH_BASS_BOOST_D4 */

    case 0x10:        /* LCH_BASS_BOOST_D5 */

    case 0x11:        /* RCH_BASS_BOOST_N0 */

    case 0x12:        /* RCH_BASS_BOOST_N1 */

    case 0x13:        /* RCH_BASS_BOOST_N2 */

    case 0x14:        /* RCH_BASS_BOOST_N3 */

    case 0x15:        /* RCH_BASS_BOOST_N4 */

    case 0x16:        /* RCH_BASS_BOOST_N5 */

    case 0x17:        /* RCH_BASS_BOOST_D1 */

    case 0x18:        /* RCH_BASS_BOOST_D2 */

    case 0x19:        /* RCH_BASS_BOOST_D4 */

    case 0x1a:        /* RCH_BASS_BOOST_D5 */

        s->filter_data[reg - 0x07] = value;

        return;

    case 0x1b:        /* PLL Programmability 1 */

        s->pll[0] = value & 0xfffc;

#ifdef TSC_VERBOSE

        if (value & ~0xfffc)

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into PLL 1\n");

#endif

        return;

    case 0x1c:        /* PLL Programmability 2 */

        s->pll[1] = value & 0xfffc;

#ifdef TSC_VERBOSE

        if (value & ~0xfffc)

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into PLL 2\n");

#endif

        return;

    case 0x1d:        /* Audio Control 4 */

        s->softstep = !(value & 0x4000);

#ifdef TSC_VERBOSE

        if (value & ~0x4000)

            fprintf(stderr, "tsc2102_audio_register_write: "

                            "wrong value written into Audio 4\n");

#endif

        return;

    default:

#ifdef TSC_VERBOSE

        fprintf(stderr, "tsc2102_audio_register_write: "

                        "no such register: 0x%02x\n", reg);

#endif

    }

}

/* This handles most of the chip logic.  */

static void tsc210x_pin_update(TSC210xState *s)

{

    int64_t expires;

    int pin_state;

    switch (s->pin_func) {

    case 0:

        pin_state = s->pressure;

        break;

    case 1:

        pin_state = !!s->dav;

        break;

    case 2:

    default:

        pin_state = s->pressure && !s->dav;

    }

    if (!s->enabled)

        pin_state = 0;

    if (pin_state != s->irq) {

        s->irq = pin_state;

        qemu_set_irq(s->pint, !s->irq);

    }

    switch (s->nextfunction) {

    case TSC_MODE_XY_SCAN:

    case TSC_MODE_XYZ_SCAN:

        if (!s->pressure)

            return;

        break;

    case TSC_MODE_X:

    case TSC_MODE_Y:

    case TSC_MODE_Z:

        if (!s->pressure)