History | View | Annotate | Download (20.3 kB)
qdev: Use QError for 'device not found' error
Please, note that we will lose the "Try -device '?' for a list" hint as it's qdev specific.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev: Check if unplug handler exists before calling it
A bus may have hotplugging enabled but not have the 'unplug'callback defined, which would lead to a crash on trying tounplug a device on the bus.
Fix by introducing an assert to check if the callback is valid....
usb core: use qdev for -usbdevice
This patchs adds infrastructure to handle -usbdevice via qdev callbacks.USBDeviceInfo gets a name field (for the -usbdevice driver name) and acallback for -usbdevice parameter parsing.
The new usbdevice_create() function walks the qdev driver list and looks...
zap DeviceState->nd
No users left.Also cleanup obsolete helper functions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio: use qdev properties for configuration.
qdev/net: common nic property bits
Add a new type for properties common to all nics.Add helper functions and macros to deal with it.
net: allow NICs to be connected to netdevs
Introduce a 'peer' member to VLANClientState as an alternativeto a vlan. The idea being that packets are transfered directlyfrom peer clients rather than going through a vlan.
Patchworks-ID: 35516Signed-off-by: Mark McLoughlin <markmc@redhat.com>...
Clean up test for qdev_init() failure
Some callers test for != 0, some for < 0. Normalize to < 0.
Patchworks-ID: 35171Signed-off-by: Markus Armbruster <armbru@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New qdev_init_nofail()
Like qdev_init(), but terminate program via hw_error() instead ofreturning an error value.
Use it instead of qdev_init() where terminating the program on failureis okay, either because it's during machine construction, or because...
Make qdev_init() destroy the device on failure
Before, every caller had to do this. Only two actually did.
Patchworks-ID: 35170Signed-off-by: Markus Armbruster <armbru@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev: move comment
Move comment back next to main_system_bus to avoid confusion.
qdev: show name of device that fails init
When initialising a device fails, show the name of the failing device.
The current behaviour is to silently exit on such errors.
Signed-off-by: Amit Shah <amit.shah@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu/qdev: type safety in reset handler
Add type safety to qdev reset handlers, by declaring them asDeviceState * rather than void *.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
store a pointer to QemuOpts in DeviceState, release it when zapping a device.
qdev: device free fixups.
Two bug fixes: * When freeing a device we unregister even stuff we didn't register in the first place because the ->init() callback failed. * When freeing a device with child busses attached, we fail to zap the child bus (and the devices attached to it)....
Add exit callback to DeviceInfo.
This adds a exit callback for device destruction to DeviceInfo, sowe can hook cleanups into qdev device destruction.
Followup patches will put that into use.
qdev hotplug: infrastructure and monitor commands.
Adds device_add and device_del commands. device_add accepts acceptsthe same syntax like the -device command line switch. device_delexpects a device id. So you should tag your devices with ids if you...
allow qdev busses allocations be inplace
Fix coding style issue
Replace:
if (-1 foo())
with:
if (foo() -1)
While this coding style is not in direct contravention of our currentlyratified CODING_STYLE treaty, it could be argued that the Article 3 ofthe European Convention on Human Rights (prohibiting torture and "inhuman...
Fix sys-queue.h conflict for good
Problem: Our file sys-queue.h is a copy of the BSD file, but there aresome additions and it's not entirely compatible. Because of that, there havebeen conflicts with system headers on BSD systems. Some hacks have beenintroduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896,...
qdev: integrate reset
qdev: integrate vmstate
qdev/scsi: add scsi bus support to qdev, convert drivers.
Adding scsi disks via -device works now, i.e. you can do:
-drive id=sda,if=none,......
qdev: add error message to qdev_device_add().
qdev error logging
Use the new qemu_error() function in qdev.c
qdev: add return value to init() callbacks.
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device initcallbacks can't signal failure because the init() callback has noreturn value. This patch fixes it....
fix qdev_print_devinfo()
snprintf returns number of bytes needed for the output, not the numberof bytes actually written. Thus the math is wrong ...
Spotted by Markus Armbruster.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>...
rename "info qdrv" to "info qdm"
As requested by avi: driver != device model.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>Message-Id:
QemuOpts: switch over -device.
Make -device switch use the QemuOpts framework.Everything should continue to work like it did before.
New: "-set device.$id.$property=$value" works.
tolower -> qemu_tolower
Use qemu_tolower() instead of tolower().Fixes warning on NetBSD.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>Message-Id:
qdev: factor out qdev_print_devinfo.
qdev/core: add monitor command to list all drivers
kill drives_table
First step cleaning up the drives handling. This one does nothing butremoving drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which handsout DriveInfo pointers instead of a table index. This needs adaption in...
qdev: create default bus names.
Create a default bus name if none is passed to qbus_create().
If the parent device has DeviceState->id set it will be used to createthe bus name,. i.e. -device lsi,id=foo will give you a scsi bus named"foo.0".
If there is no id BusInfo->name (lowercased) will be used instead, i.e....
qdev: bus walker + qdev_device_add()
This patch implements a parser and qdev tree walker for bus paths andadds qdev_device_add on top of this.
A bus path can be: (1) full path, i.e. /i440FX-pcihost/pci.0/lsi/scsi.0 (2) bus name, i.e. "scsi.0". Best used together with id= to make...
Suppress a Sparse warning
Move the export to a file used by both qdev.c and sysbus.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qdev: add user-specified identifier to devices.
Add id field to DeviceState. Make "info qtree" print it.
This helps users and management apps identifying devices in monitoroutput, which is especially useful with otherwise identical devicessuch as two virtio disks....
qdev: factor out driver search to qdev_find_info()
qdev/compat: compat property infrastructure.
This add support for switching devices into a compatibility modeusing device properties. Machine types can have a list of propertiesfor specific devices attached to allow the easy creation of machinetypes compatible to older qemu versions....
qdev: add no_user, alias and desc
no_user: prevent users from adding certain devices.desc: description of the device.alias: to allow user friendly shortcuts on the command line, i.e. -device usbmouse instead of -device "QEMU USB Mouse" or -device lsi instead of -device lsi53c895a...
qdev: rework device properties.
This patch is a major overhaul of the device properties. The propertiesare saved directly in the device state struct now, the linked list ofproperty values is gone.
Advantages: * We don't have to maintain the list with the property values....
Update to a hopefully more future proof FSF address
Don't leak VLANClientState on PCI hot remove
destroy_nic() requires that NICInfo::private by a PCIDevice pointer,but then goes on to require that the same pointer matchesVLANClientState::opaque.
That is no longer the case for virtio-net since qdev and wasn't...
qdev: replace bus_type enum with bus_info struct.
BusInfo is filled with name and size (pretty much like I did forDeviceInfo as well). There is also a function pointer to printbus-specific device information to the monitor. sysbus is hookedup there, I've also added a print function for PCI....
qdev: remove DeviceType
The only purpose DeviceType serves is creating a linked list ofDeviceInfo structs. This removes DeviceType and add a next field toDeviceInfo instead, so the DeviceInfo structs can be changed that way.Elimitates a pointless extra level of indirection....
qdev: move name+size into DeviceInfo (v2)
Rationale: move device information from code to data structures.
v2: Adapt the drivers missed in the first version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Merge branch 'net-queue'
Fix Sparse warning
net: add fd_readv() handler to qemu_new_vlan_client() args
This, apparently, is the style we prefer - all VLANClientStateshould be an argument to qemu_new_vlan_client().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
net: re-name vc->fd_read() to vc->receive()
VLANClientState's fd_read() handler doesn't read from filedescriptors, it adds a buffer to the client's receive queue.
Re-name the handlers to make things a little less confusing.
qdev: c99 initilaizers for bus_type_names
Fix typo
Signed-off-by: Paul Brook <paul@codesourcery.com>
qdev: add monitor command to dump the tree.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Paul Brook <paul@codesourcery.com>
Record device property types
Record device property types, and provide a list of properties at deviceregistration time.
Add a "device" property type that holds a reference to annother device.
qdev: kill DeviceState->name
is redundant with DeviceState->type->name
Remove qdev irq sink handling
We have both IRQ sinks and GPIO inputs. These are in principle exactlythe same thing, so remove the former.
Add common BusState
Implement and use a common device bus state. The main side-effect isthat creating a bus and attaching it to a parent device are no longerseparate operations. For legacy code we allow a NULL parent, but thatshould go away eventually....
Consistently use uint64_t for int properties
I apparently failed to do this properly on the first attempt.
qdev scsi bus infrastructure
PCI network qdev conversion
Basic qdev infrastructure.
qdev child bus support