History | View | Annotate | Download (30.2 kB)
Add pci_ne2000_{save/load} functions, then remove pci_dev NE2000State field
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev: add return value to init() callbacks.
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device initcallbacks can't signal failure because the init() callback has noreturn value. This patch fixes it....
Port PCI Bus to VMState design
This uses VARRAY and INT32_EQUAL values
Add version_id to PCIDevice.
It is needed for VMState
Port PCIDevice state to VMState
This uses a variant of buffer, with extra checks. Also uses the newsupport for cheking that a read value is less or equal than a field.
qdev/prop: convert pci.c to helper macros.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>Message-Id:
qdev/pci: use qdev_prop_pci_devfn
Put the new property into use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Sparc64: convert APB to qdev
Thanks to Igor Kovalenko for a bugfix.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qdev: add id= support for pci nics.
qdev: print device id in "info pci".
qdev: rework device properties.
This patch is a major overhaul of the device properties. The propertiesare saved directly in the device state struct now, the linked list ofproperty values is gone.
Advantages: * We don't have to maintain the list with the property values....
pci.c: remove unnecessary #ifdef DEBUG_PCI.
remove unnecessary #ifdef DEBUG_PCI.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix PCI IRQ breakage
Zero initialize the PCI bus irq count.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Fix APB by reverting 16eaedf2668e9b347a59d73346fcc4c764c58348 partially
qdev: replace bus_type enum with bus_info struct.
BusInfo is filled with name and size (pretty much like I did forDeviceInfo as well). There is also a function pointer to printbus-specific device information to the monitor. sysbus is hookedup there, I've also added a print function for PCI....
qdev/pci: misc fixes.
qdev: update pci device registration.
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunchof parameters. Also adds config_read and config_write callbacks toPCIDeviceInfo, so drivers needing these can be converted to the qdevdevice API too....
Revert "Introduce reset notifier order"
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (andupdates later added users of qemu_register_reset), we solved theproblem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>...
monitor: Drop pci_addr prefix from hotplug commands
The "pci_addr=" prefix currently required by pci_add/remove anddrive_add has no practical use. Drop it, but still silently accept itfor backward compatibility.
qemu/pci: make default_write_config use mask table
Change much of hw/pci to use symbolic constants and a table-drivendesign: add a mask table with writable bits set and readonly bits unset.Detect change by comparing original and new registers.
This makes it easy to support capabilities where read-only/writeable...
qemu/pci: add routines to manage PCI capabilities
Add routines to manage PCI capability list. First user will be MSI-X.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu/pci: check constant registers on load
Add "cmask" table of constant register masks: if a bit is not writeableand is set in cmask table, this bit is checked on load. An attempt toload an image that would change such a register causes load to fail....
Fix do_pci_register_device() to reject devfn already in use
Signed-off-by: Markus Armbruster <armbru@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into structNICinfo. Use it in pci_nic_init(), and remove arguments bus anddevfn.
Don't support addr= in third argument of monitor command pci_add,because that clashes with its first argument. Admittedly unelegant....
Make first argument of monitor command pci_add work
Simply pass the PCI address through qemu_pci_hot_add_nic() topci_nic_init() and through qemu_pci_hot_add_storage() to pci_create().
Before, pci_device_hot_add() passed along the PCI bus to use, andignored any user-specified slot....
Add pci_bus_reset() function.
To reset internal irq handling data structures.
Signed-off-by: Gleb Natapov <gleb@redhat.com>Signed-off-by: Yaniv Kamay <ykamay@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rename pci_register_io_region() to pci_register_bar()
This function is used to manage a PCI BAR, so make the more genericpci_register_io_region() available to other uses.
Signed-off-by: Avi Kivity <avi@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev: move name+size into DeviceInfo (v2)
Rationale: move device information from code to data structures.
v2: Adapt the drivers missed in the first version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove unused and misnamed field and variable
Add common BusState
Implement and use a common device bus state. The main side-effect isthat creating a bus and attaching it to a parent device are no longerseparate operations. For legacy code we allow a NULL parent, but thatshould go away eventually....
Separate virtio PCI code
Split the PCI host bindings from the VRing transport implementation.
PCI qdev support
PCI network qdev conversion
Virtio-net qdev conversion
minor fix of pci_register_bus()
keep first_bus linked list correct.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
use PCI_HEADER_TYPE.
use symbolic value instead of 0x0e and related value.
Make PCI config status register read-only
From the documentation I can find, this register is supposed to be read-only.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7070 c046a42c-6fe2-441c-8c8c-71466251a162
monitor: Rework API (Jan Kiszka)
Refactor the monitor API and prepare it for decoupled terminals:term_print functions are renamed to monitor_* and all monitor servicesgain a new parameter (mon) that will once refer to the monitor instancethe output is supposed to appear on. However, the argument remains...
Parse full PCI device addresses (Markus Armbruster)
This code parses full PCI device addresses. It then rejects domainsother than zero, because these are not supported in QEMU.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>...
qemu: warn if PCI region is not power of two (Marcelo Tosatti)
Otherwise the PCI size for such regions can be calculated erroneously.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6604 c046a42c-6fe2-441c-8c8c-71466251a162
qemu: add pci_unregister_device (Marcelo Tosatti)
Unregister the pci device, unassign its IO and memory regions, and freeassociated data.
Add a callback so drivers can free device state.
qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)
Change the PCI network drivers init functions to return the PCIDev, toinform which slot has been hot-plugged.
Also record PCIDevice structure on NICInfo to locate for release on...
qemu: add pci helper functions (Marcelo Tosatti)
Add pci_find_bus/pci_find_device to be used by PCI hotplug.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6592 c046a42c-6fe2-441c-8c8c-71466251a162
hw: remove error handling from qemu_malloc() callers (Avi Kivity)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
Add and use #defines for PCI device classes
This patch adds and uses #defines for PCI device classes and subclases,using a new pci_config_set_class() function, similar to the recentlyadded pci_config_set_vendor_id() and pci_config_set_device_id().
Change since v1: fixed compilation of hw/sun4u.c...
Add Simba device ID
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6465 c046a42c-6fe2-441c-8c8c-71466251a162
Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)
Add a table of PCI NIC models to pass to qemu_setup_nic_model().
While we're at it, also add a corresponding table of NIC initfunctions.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>...
PCI: Mask writes to RO bits in the command reg of PCI config space
The Command register in the PCI config space has some read-only bits.Any writes to those bits should be masked out.
Signed-off-by: Amit Shah <amit.shah@redhat.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>...
PCI: Mask writes to RO bits in the status reg of PCI config space
The Status register in the PCI config space has some read-only bits.Any writes to those bits should be masked out.
virtio-net support
This adds virtio-net support. This is based on the virtio-net driverthat exists in kvm-userspace. This also adds a new qemu_sendv_packetwhich virtio-net requires.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6073 c046a42c-6fe2-441c-8c8c-71466251a162
pci: add default pci subsystem id for all devices (Gerd Hoffman)
This sets a default PCI subsystem ID for all emulated PCI devices. PCIspecs require this, so do it.
In many cases it is enougth to know the PCI ID to handle a devicecorrectly. Sometimes a device driver must identify the exact piece of...
KVM: Coalesced MMIO support
MMIO exits are more expensive in KVM or Xen than in QEMU because theyinvolve, at least, privilege transitions. However, MMIO writeoperations can be effectively batched if those writes do not have sideeffects.
Good examples of this include VGA pixel operations when in a planar...
Make PCI class description tables const
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5400 c046a42c-6fe2-441c-8c8c-71466251a162
E1000 NIC emulation (Nir Peleg, patch from Dor Laor).Applied %s/^\([^I ]*\)^I/\1 /g on e1000.c and added e1000 to help message.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3949 c046a42c-6fe2-441c-8c8c-71466251a162
Save/load PCI-device, PCI-bus and PIIX3 irq-related state (patches by Uri Lublin.Note that other PCI bridges are not fixed here.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3793 c046a42c-6fe2-441c-8c8c-71466251a162
Add statics and missing #includes for prototypes.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3683 c046a42c-6fe2-441c-8c8c-71466251a162
Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in the regex.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
find -type f | xargs sed -i 's/[\t ]$//g' # on most files
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
New option -net nic,model=? (Mark Glines)Network documentation update (Mark Glines)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2880 c046a42c-6fe2-441c-8c8c-71466251a162
Know about more PCI device classes.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2663 c046a42c-6fe2-441c-8c8c-71466251a162
Unify IRQ handling.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2635 c046a42c-6fe2-441c-8c8c-71466251a162
Eepro100 emulation, by Stefan Weil.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2584 c046a42c-6fe2-441c-8c8c-71466251a162
Fix typo in PCI bridge code.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2470 c046a42c-6fe2-441c-8c8c-71466251a162
Devfn number for network PCI cards, by Aurelien Jarno.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2314 c046a42c-6fe2-441c-8c8c-71466251a162
Fix PCI config space overflow, by Herbert Xu.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2238 c046a42c-6fe2-441c-8c8c-71466251a162
PCI IRC routing fix.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2185 c046a42c-6fe2-441c-8c8c-71466251a162
Implement sun4u PCI IRQ routing.Allow multiple PCI busses and PCI-PCI bridges.Fix bugs in Versatile PCI implementation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2166 c046a42c-6fe2-441c-8c8c-71466251a162
PCI shared IRQ fix (original patch by andrzej zaborowski).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2165 c046a42c-6fe2-441c-8c8c-71466251a162
PCI save/restore changes
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2115 c046a42c-6fe2-441c-8c8c-71466251a162
Add SCSI controller class.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2106 c046a42c-6fe2-441c-8c8c-71466251a162
pcnet nic support (Antony T Curtis)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2036 c046a42c-6fe2-441c-8c8c-71466251a162
Use lookup table for PCI class descriptions.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1927 c046a42c-6fe2-441c-8c8c-71466251a162
Rearrange PCI host emulation code.Add ARM PCI emulation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1916 c046a42c-6fe2-441c-8c8c-71466251a162
Initialize PCI BAR config data.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1824 c046a42c-6fe2-441c-8c8c-71466251a162
do not test reserved config bits
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1795 c046a42c-6fe2-441c-8c8c-71466251a162
Allow selection of emulated network card.rtl8139 emulation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1745 c046a42c-6fe2-441c-8c8c-71466251a162
cpu_single_env usage fix
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1644 c046a42c-6fe2-441c-8c8c-71466251a162
sparc64 fixes (Blue Swirl)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1514 c046a42c-6fe2-441c-8c8c-71466251a162
correct PCI ID for PREP PCI host bridge - added Grackle PCI host bridge
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1450 c046a42c-6fe2-441c-8c8c-71466251a162
handle the case where several PCI irqs share the same PIC irq
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1433 c046a42c-6fe2-441c-8c8c-71466251a162
PREP machines have two IO mappings.This patch adds support for non-contiguous IO map, which is used byOS/2.It also adds the missing legacy IO ports for the PREP PCI bridge andchanges CPU PVR from 74x/75x to 604 to make OS/2 happy.(Jocelyn Mayer)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1381 c046a42c-6fe2-441c-8c8c-71466251a162
PCI irq in sync with new Bochs BIOS
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1351 c046a42c-6fe2-441c-8c8c-71466251a162
monitor fixes (Johannes Schindelin)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1109 c046a42c-6fe2-441c-8c8c-71466251a162
ne2000 savevm support (Johannes Schindelin)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1092 c046a42c-6fe2-441c-8c8c-71466251a162
configure BMDMA
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@972 c046a42c-6fe2-441c-8c8c-71466251a162
added PCI bus - added IRQ support for PowerPC bridges - suppressed PREP PCI bios init
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@962 c046a42c-6fe2-441c-8c8c-71466251a162
UniNorth PCI bridge support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@955 c046a42c-6fe2-441c-8c8c-71466251a162
IDE1 init fix
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@916 c046a42c-6fe2-441c-8c8c-71466251a162
init VGA with default config
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@900 c046a42c-6fe2-441c-8c8c-71466251a162
host bridge config fix
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@895 c046a42c-6fe2-441c-8c8c-71466251a162
fixed PCI config default write permissions
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@878 c046a42c-6fe2-441c-8c8c-71466251a162
support for opaque data on memory I/Os - PCI ROM memory support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@876 c046a42c-6fe2-441c-8c8c-71466251a162
PowerPC prep/chrp/pmac support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@863 c046a42c-6fe2-441c-8c8c-71466251a162
pci empty device read fix - piix3 ide init
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@854 c046a42c-6fe2-441c-8c8c-71466251a162
pci memory mapping fix
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@844 c046a42c-6fe2-441c-8c8c-71466251a162
PCI interrupt support - PCI BIOS interrupt remapping - more accurate memory mapping - 'info pci' monitor command
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@823 c046a42c-6fe2-441c-8c8c-71466251a162
PCI support
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@818 c046a42c-6fe2-441c-8c8c-71466251a162