History | View | Annotate | Download (1.9 kB)
Merge remote-tracking branch 'remotes/bonzini/configure' into staging
rules.mak: introduce DSO rules
Add necessary rules and flags for shared object generation.The new rules introduced here are:
1) %.o in $(common-obj-m) is compiled to %.o, then linked to %.so.
2) %.mo in $(common-obj-m) is the placeholder for %.so for pattern...
Add ust generated files to .gitignore
Signed-off-by: Mohamad Gebai <mohamad.gebai@polymtl.ca>Reviewed-by: Alex Bennée <alex@bennee.com>Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
gitignore: anchor all ignored names
by default, patterns/names in .gitignore are appliedrecursively to all subdirectories. So any name mentionedin .gitignore is ignored in all subdirectores. This is goodfor, say. object files (*.o), but not good for particular...
.gitignore: Ignore config.status
Signed-off-by: Fam Zheng <famz@redhat.com>Reviewed-by: Stefan Weil <sw@weilnetz.de>Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
.gitignore: ignore qmp-commands.txt
This file is moved out from QMP/ to BUILD dir, change the ignore filetoo.
Signed-off-by: Fam Zheng <famz@redhat.com>Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu-ga: Add configure options to specify path to Windows/VSS SDK
To enable VSS support in qemu-ga for Windows, header files included inVSS SDK are required.The VSS support is enabled by the configure option like below: ./configure --with-vss-sdk="/path/to/VSS SDK"...
add "test-int128" and "test-bitops" to .gitignore
"test-int128" was probably missed in commit 6046c620("int128: optimize and add test cases").
"test-bitops" was probably missed in commit 3464700f("tests: Add test-bitops.c with some sextract tests").
Signed-off-by: Laszlo Ersek <lersek@redhat.com>...
OptsVisitor: introduce unit tests, with test cases for range flattening
According to commit 4f193e34("tests: Use qapi-schema-test.json as schema parser test")the "tests/qapi-schema/qapi-schema-test.out" file must be updated as well.
gitignore: unignore *.patch
This partially reverts:
commit 082369e62c5bbaba89f173c2b803bc24115bb111 Author: liguang <lig.fnst@cn.fujitsu.com> Date: Fri Mar 22 16:44:13 2013 +0800
gitignore: ignore more files
I'm not sure how this went in. The thing is that...
S390: ccw firmware: Add Makefile
This patch adds a makefile, so we can build our ccw firmware. Alsoadd the resulting binaries to .gitignore, so that nobody is annoyedthey might be in the tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
.gitignore: add trace/generated-events.[ch]
Don't display autogenerated files in git-status(1).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.gitignore: rename trace/generated-tracers.dtrace
For a while the file was called trace/generated-tracers-dtrace.dtracebut today it's called trace/generated-tracers.dtrace.
ignore *.patch, *.gcda, *.gcno
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>Reviewed-by: Andreas Färber <afaerber@suse.de>Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
.gitignore: Ignore optionrom/*.asm
Signed-off-by: Cole Robinson <crobinso@redhat.com>Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add libcacard/trace/generated-tracers.c to .gitignore
Signed-off-by: Alex Rozenman <Alex_Rozenman@mentor.com>Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-ga: sample fsfreeze hooks
Adds sample hook scripts for --fsfreeze-hook option of qemu-ga. - fsfreeze-hook : execute scripts in fsfreeze-hook.d/ - fsfreeze-hook.d/mysql-flush.sh.sample : quiesce MySQL before snapshot
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>...
build: Use separate makefile for "trace/"
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>--Changes in v2:
Merge remote-tracking branch 'bonzini/header-dirs' into staging
build: kill libdis, move disassemblers to disas/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gitignore: Add virtfs-proxy-helper
Remove libhw
The entries for libhw* are no longer needed in .gitignore.
There is also no longer a difference between common-obj-y andhw-obj-y, so one of those two macros is sufficient.
Signed-off-by: Stefan Weil <sw@weilnetz.de>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make target_phys_addr_t 64 bits unconditionally
The hassle and compile time overhead of maintaining both 32-bit and 64-bitcapable source isn't worth the tiny performance advantage which is seen ona minority of configurations. Switch to compiling libhw only once, with...
.gitignore update
Makes sure the following files are ignored:
libcacard/.libs/ libcacard/libcacard.la libcacard/libcacard.pc libcacard/libcacard/ libcacard/osdep.lo libcacard/oslib-posix.lo libcacard/qemu-thread-posix.lo libcacard/qemu-timer-common.lo...
.gitignore: add qemu-bridge-helper and option rom build products
This adds a few previously missing generated files to .gitignore: theqemu-bridge-helper binary, and more generated versions of thelinuxboot, multiboot and kvmvapic roms from pc-bios/optionrom....
Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
qapi: add tests for string-based visitors
kvmvapic: Add option ROM
This imports and builds the original VAPIC option ROM of qemu-kvm.Its interaction with QEMU is described in the commit that introduces thecorresponding device model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>Signed-off-by: Avi Kivity <avi@redhat.com>
Update gitignore file
This patch adds several auto-generated files to .gitignore which werepreviously missing.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>Signed-off-by: Alexander Graf <agraf@suse.de>
Add qapi related generated files to .gitignore
.gitignore already lists the qapi-generated subdirectory which includes anumber of files generated during build. However, there are some additionalfiles generated by the qapi build which go in the top level directory....
Add linux-headers/asm to .gitignore
linux-headers/asm is a symlink generated during configure. It should not,therefore be committed to git, nor show up in git diffs and the like.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>Reviewed-by: Juan Quintela <quintela@redhat.com>...
coroutine: add test-coroutine automated tests
To run automated tests for coroutines:
make test-coroutine ./test-coroutine
On success the program terminates with exit status 0. On failure anerror message is written to stderr and the program exits with exit...
.gitignore: ignore qemu-ga and qapi-generated
Add a new binary and generation directory to the gitignore file
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Makefile: Clean up after "make pdf"
Signed-off-by: Brad Hards <bradh@frogmouth.net>Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add TAGS and *~ to .gitignore
Add the etags output generated by "make TAGS" and editor backup filesto .gitignore.
This patch has previously appeared in my series of patches to addpSeries emulation support. However, it obviously has no realconnection to that, and can be applied seperately....
.gitignore: ignore vi swap files and ctags files
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Revert "Add a DTrace tracing backend targetted for SystemTAP compatability"
This reverts commit 4addb1127f6327c7ebcbd150a6b589e7677adc92.
Add a DTrace tracing backend targetted for SystemTAP compatability
This introduces a new tracing backend that targets the SystemTAPimplementation of DTrace userspace tracing. The core functionalityshould be applicable and standard across any DTrace implementation...
.gitignore: Ignore *-timestamp
Timestamp files were recently added to reduce make churn on source filesthat use tracing. The timestamp files should never be committed andshould not be visible in git status.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>...
trace: Add trace-events file for declaring trace events
This patch introduces the trace-events file where trace events can bedeclared like so:
qemu_malloc(size_t size) "size %zu" qemu_free(void *ptr) "ptr %p"
These trace event declarations are processed by a new tool called...
trace: Add simple built-in tracing backend
This patch adds a simple tracer which produces binary trace files. Totry out the simple backend:
$ ./configure --trace-backend=simple$ make
After running QEMU you can pretty-print the trace:
$ ./simpletrace.py trace-events trace.log...
add cscope.* to .gitignore
we have "make cscope", therefore that makes sense to have cscope.* in.gitignore.
Signed-off-by: Jun Koi <junkoi2004@gmail.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add QMP/qmp-commands.txt to .gitignore
QMP/qmp-commands.txt is a generated file.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
.gitignore: Ignore libdis*, qemu-options.def
libdis, libdis-user and qemu-options.def are generateddirectories / files and should be ignored by git.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove i386 from .gitignore
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Documentation: Add build support for documentation in pdf format
Makefile already supported dvi, html and info formats,but pdf was missing.
pdf is especially convenient for printing and fordocumentation reviews. I hope it will help toimprove qemu's documentation....
linuxboot.bin is a generated file
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add new config-devices.mak for each target
We generate config-devices.h from there automatically.We need to do it in main Makefile, because we are going to need a mainMakefile for them.
Patchworks-ID: 35196Signed-off-by: Juan Quintela <quintela@redhat.com>...
Rename config.{h, mak} config-target.{h, mak}
Add config.h file that includes config-target.h and config-host.h
Patchworks-ID: 35193Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
libuser is a generated directory
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
multiboot.raw is a generated file
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
multiboot.bin is a generated file
dot gitignore: add qemu-monitor.texi
add qemu-monitor.texi to .gitignore.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use hxtool for qemu-img command list
Use hxtool to generate the 'command syntax' section of qemu-img's helpmessage, and the corresponding section of the texinfo documentation.
This has the side-effect of adding 'check' to this list of commands inthe texinfo documentation....
Hardware convenience library
The only target dependency for most hardware is sizeof(target_phys_addr_t).Build these files into a convenience library, and use that instead ofbuilding for every target.
Remove and poison various target specific macros to avoid bogus target...
gitignore qemu-options.texi
$subj
François.
Signed-off-by: François Revol <revol@free.fr>
update .gitignore: add qemu-io (Gerd Hoffmann)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7218 c046a42c-6fe2-441c-8c8c-71466251a162
Extend gitignore (Jan Kiszka)
Exclude objects in the root directory and temporary stgit files.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6401 c046a42c-6fe2-441c-8c8c-71466251a162
Update VGA BIOS
Now built from the kernel.org git tree.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6079 c046a42c-6fe2-441c-8c8c-71466251a162
Update to the latest Bochs BIOS
Update the PC BIOS to the latest version, split out the patches intopatch series, and update the README to point to the new location of theBochs BIOS source tree.
Also update the gitignore to allow the patch queue directory to be used....
Ignore .pc and patches used by quilt
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6024 c046a42c-6fe2-441c-8c8c-71466251a162
SVN property and .gitignore fixes (Stuart Brady)
Remove dyngen and dyngen.dSYM from svn property svn:ignoreAdd *-bsd-user and qemu-nbd.pod to the svn property svn:ignore and .gitignore
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6022 c046a42c-6fe2-441c-8c8c-71466251a162
Remove unnecessary trailing newlines
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
Update .gitignore
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5916 c046a42c-6fe2-441c-8c8c-71466251a162
Add gitignore file
While QEMU officially uses SVN, there are a number of unofficial gitrepositories that many developers use. Adding a .gitignore (derived from thesvn:ignore) will make their lives a lot easier.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>...