History | View | Annotate | Download (14 kB)
targe-ppc: Sync CPU state for KVM
Some recent change made PPC guests always start at address 0x0 because envisn't synced to kvm_state on first bootup.
I'm not sure if this is the correct bugfix, but at least it makes PPC bootagain with KVM enabled.
Signed-off-by: Alexander Graf <agraf@suse.de>...
pci: pci.h cleanup: move out stuff not in pci.c
pci.h declares some functions which aren'tdefined in pci.h. Clean up moving thingsto appropriate headers, and update all users.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PPC: rename cpu_ppc_reset to cpu_reset for consistency
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
rom loader: fix sparc -kernel boot.
Changes:(1) register pstrcpy_targphys() in rom list, it is used for kernelcommand lines by a number of architectures.(2) add rom_ptr() function to get a pointer for applying changesto loaded images. Needed for example to tell the linux kernel...
Fix pci_add nic not to exit on bad model
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() tocreate the NIC. When MODEL is unknown or "?", this prints to stderrand terminates the program.
Change pci_nic_init() not to treat "?" specially, and to return NULL...
Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Somethinglike this must be presented on the list first so people can provide input...
Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the timebeing.
Signed-off-by: malc <av1474@comtv.ru>
Compile loader only once
Callers must pass ELF machine, byte swapping and symbol LSB clearinginformation to ELF loader. A.out loader needs page size information, passthat too as a parameter.
Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw....
qdev/usb: convert ohci.
Drop num_ports argument for usb_ohci_init_pci(), everybodycalls it with num_ports == 3, so it is pointless.
Convert ohci pci device into qdev.TODO: convert non-pci ohci adapters.
You can add a OHCI USB Controller to your virtual pc now using...
ide: pass down DriveInfo instead of BlockDriverState
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ide: split away ide-pci.c
create ide-pci.c and place pci bus support there.only build ide-pci support for platforms using it.
Fix build (merge with isa mmio split)
Replace REGX with PRIx64
ppc_oldworld: configure screen size from qemu command line options
This patch uses the FW_CFG interface to send user requested screen sizeand depth to openbios.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix Sparse warnings: "Using plain integer as NULL pointer"
kill drives_table
First step cleaning up the drives handling. This one does nothing butremoving drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which handsout DriveInfo pointers instead of a table index. This needs adaption in...
PPC: Round VGA BIOS size to page boundary
When giving KVM a slot of a size not on page boundary, it chokes. So let'sjust round up the VGA BIOS size so nobody complains anymore and we don't needto implement sub-page slots.
Required for booting a PPC guest in KVM....
Revert "Introduce reset notifier order"
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (andupdates later added users of qemu_register_reset), we solved theproblem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>...
Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into structNICinfo. Use it in pci_nic_init(), and remove arguments bus anddevfn.
Don't support addr= in third argument of monitor command pci_add,because that clashes with its first argument. Admittedly unelegant....
Use relative path for bios
Look for bios and other support files relative to qemu binary, rather thana hardcoded prefix.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Introduce reset notifier order
Add the parameter 'order' to qemu_register_reset and sort callbacks onregistration. On system reset, callbacks with lower order will beinvoked before those with higher order. Update all existing users to thestandard order 0....
Introduce is_default field for QEMUMachine
f80f9ec changed the order that machines are registered which had the effect ofchanging the default machine. This changeset introduces a new is_default fieldso that machine types can declare that they are the default for an architecture....
Convert machine registration to use module init functions
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove vga_ram_size
The vga_ram_size argument to machine init functions always has the samevalue, and is ignored by many machines (including SPARC32 which has anobsolete ifdef for VGA_RAM_SIZE).
Remove it and push VGA_RAM_SIZE into vga_int.h.
Replace cpu_abort with hw_error
Remove redundant ram_require machine properly.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
Clean up VGA ram allocation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
More phys_ram_base removal.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7060 c046a42c-6fe2-441c-8c8c-71466251a162
Use load_image_targphys and avoid phys_ram_base.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7056 c046a42c-6fe2-441c-8c8c-71466251a162
Use firmware configuration instead of NVRAM (initial patch by Aurelien Jarno)
Use firmware configuration device for boot device, kernel, initrd andkernel command line parameters on PPC, Sparc32 and Sparc64.
Update OpenBIOS images to r479 which supports the change....
ppc_oldworld: swap the MACIO and CMD646 IDE controllers
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6763 c046a42c-6fe2-441c-8c8c-71466251a162
Load 32 bit ELF BIOS images also on PPC64
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6554 c046a42c-6fe2-441c-8c8c-71466251a162
Add it_shift
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6547 c046a42c-6fe2-441c-8c8c-71466251a162
Update #defines for PCI vendor and device IDs from OpenBIOS and Linux
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6490 c046a42c-6fe2-441c-8c8c-71466251a162
PowerPC: IDE DB-DMA support
This patches allows powermac IDE interface to use DB-DMA.This implementation uses only synchronous I/O.
Signed-off-by: Laurent Vivier <Laurent@lvivier.info>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6489 c046a42c-6fe2-441c-8c8c-71466251a162
PowerPC: mac-io DB-DMA support
This patch adds powermac Descriptor-Based DMA.It is used by mac-io based IDE, ethernet, sounds and serial devices.
Signed-off-by: Laurent Vivier <Laurent@lvivier.info>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>...
target-ppc: always load kernel to KERNEL_LOAD_ADDR
Linux changed its physical address location in the elf header from0xc0000000 to 0 on 2.6.25, causing later kernels to fail bootingwith the -kernel option.
This patch assures that the lowest segment in the elf binary is loaded...
Fix kernel_size and initrd_size sign (Francois Revol)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6415 c046a42c-6fe2-441c-8c8c-71466251a162
ppc_oldworld: remove i8259
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6348 c046a42c-6fe2-441c-8c8c-71466251a162
ppc_oldworld: remove debug I/O port
This is specific to OpenHackware, and not used by OpenBIOS.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6347 c046a42c-6fe2-441c-8c8c-71466251a162
graphical_console_init change (Stefano Stabellini)
Patch 5/7
This patch changes the graphical_console_init function to return anallocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few othermodifications mainly in console.c and vl.c....
PPC OldWorld: use a more realistic timer frequency
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6296 c046a42c-6fe2-441c-8c8c-71466251a162
escc: allow one IRQ per serial channel
The Z85C30 on the PowerMAC machines have one interrupt per serialchannel, while the Sparc machines have only one for both. Allow theemulated device to use one IRQ per channel.
Patch by Laurent Vivier.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6295 c046a42c-6fe2-441c-8c8c-71466251a162
Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)
Add a table of PCI NIC models to pass to qemu_setup_nic_model().
While we're at it, also add a corresponding table of NIC initfunctions.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>...
target-ppc: define max amount of memory for G3 beige
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6283 c046a42c-6fe2-441c-8c8c-71466251a162
target-ppc: fix comment about boot device in ppc_oldworld.c
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6282 c046a42c-6fe2-441c-8c8c-71466251a162
Use ESCC for PowerMac serial
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6271 c046a42c-6fe2-441c-8c8c-71466251a162
target-ppc: revert part of commit r6254 committed accidentally
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6257 c046a42c-6fe2-441c-8c8c-71466251a162
Add v{add, sub}{s, u}{b, h, w}s instructions
Nathan Froyd <froydnj@codesourcery.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6254 c046a42c-6fe2-441c-8c8c-71466251a162
target-ppc: move OpenBIOS machines type to ppc.h from hw/ppc_oldworld.c
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6231 c046a42c-6fe2-441c-8c8c-71466251a162
Some more updates for the g3bw -> g3beige change
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6230 c046a42c-6fe2-441c-8c8c-71466251a162
target-ppc: Switch ppc_oldworld.c to G3 beige
The G3 B&W is a new world machine. The machine currently implemented isactually closer to a G3 beige.
Also swith the MacIO from Paddigton (new world) to Heathrow (old world).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>...
Fix kernel loading
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6131 c046a42c-6fe2-441c-8c8c-71466251a162
Use the firmware configuration device
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6130 c046a42c-6fe2-441c-8c8c-71466251a162
Use OpenBIOS for g3bw machine
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6128 c046a42c-6fe2-441c-8c8c-71466251a162
target-ppc: modify hw/ppc_oldword.c to use qemu_ram_alloc()
This patch uses qemu_ram_alloc() to allocate RAM, VGA RAM and VGA BIOS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>Signed-off-by: Laurent Vivier <Laurent@lvivier.info>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>...
target-ppc: default to a G3 cpu when emulating a G3 PowerMac
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6113 c046a42c-6fe2-441c-8c8c-71466251a162
Set default max_cpus to one.
Clean-up machine definitions.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5566 c046a42c-6fe2-441c-8c8c-71466251a162
machine struct - specify max_cpus at the per machine level (Jes Sorensen)
Introduce a max_cpus per-machine variable, allowing individual boardsto limit it's number of CPUs. Check requested number of CPUs in setupcode and exit if it exceeds the supported number for the machine....
machine struct - use C99 initializers (Jes Sorensen)
Modify all the machine struct declarations to use C99 initializers.This patch has no functional changes.
Signed-off-by: Jes Sorensen <jes@sgi.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>...
Move CPU save/load registration to common code.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4808 c046a42c-6fe2-441c-8c8c-71466251a162
8250: Customized base baudrate
(Jan Kiszka)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4336 c046a42c-6fe2-441c-8c8c-71466251a162
Use correct types to enable > 2G support, based on a patch fromAnthony Liguori.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4265 c046a42c-6fe2-441c-8c8c-71466251a162
RAM usage information in machine definition.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4246 c046a42c-6fe2-441c-8c8c-71466251a162
Revert "Use correct types to enable > 2G support" (r4238), it isnot yet ready.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4240 c046a42c-6fe2-441c-8c8c-71466251a162
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4238 c046a42c-6fe2-441c-8c8c-71466251a162
Add -drive parameter, by Laurent Vivier.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162
More PowerPC debug print fixes - hardware emulation pass.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3726 c046a42c-6fe2-441c-8c8c-71466251a162
Revert foolish patch.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3724 c046a42c-6fe2-441c-8c8c-71466251a162
Fix ppc32 register dumps on 64-bit hosts.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3723 c046a42c-6fe2-441c-8c8c-71466251a162
Remove unused parameters from QEMUMachineInitFunc (Laurent Vivier)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3687 c046a42c-6fe2-441c-8c8c-71466251a162
Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
Fix PowerPC boot device selection.Fix gcc warning in PowerPC PreP machine init routine.Add second IDE channel to Heathrow Mac machine (still not handled by OHW).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3586 c046a42c-6fe2-441c-8c8c-71466251a162
More generic boot devices specification, allowing more devices to be specifiedand avoiding per-target hardcoded limitations.The machine implementations can then check if the given devices match theactual hardware implementation and firmware API.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3577 c046a42c-6fe2-441c-8c8c-71466251a162
added cpu_model parameter to cpu_init()
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3562 c046a42c-6fe2-441c-8c8c-71466251a162
Fix PowerMac NVRAM device.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3521 c046a42c-6fe2-441c-8c8c-71466251a162
Set boot sequence from command line (Dan Kenigsberg).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3497 c046a42c-6fe2-441c-8c8c-71466251a162
PowerPC 601 / 620 / 970 need a 1MB firmware.This option is not allowed for PowerMac, as it would overlap with NVRAM.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3480 c046a42c-6fe2-441c-8c8c-71466251a162