History | View | Annotate | Download (11.3 kB)
qdev/scsi: add scsi bus support to qdev, convert drivers.
Adding scsi disks via -device works now, i.e. you can do:
-drive id=sda,if=none,......
qdev/usb: convert ohci.
Drop num_ports argument for usb_ohci_init_pci(), everybodycalls it with num_ports == 3, so it is pointless.
Convert ohci pci device into qdev.TODO: convert non-pci ohci adapters.
You can add a OHCI USB Controller to your virtual pc now using...
We want the argument pass to set_irq to be opaque
piix_pci want to pass more things that the pic
Signed-off-by: Juan Quintela <quintela@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev: add return value to init() callbacks.
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device initcallbacks can't signal failure because the init() callback has noreturn value. This patch fixes it....
Add version_id to PCIDevice.
It is needed for VMState
qdev/prop: convert pci.c to helper macros.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>Message-Id:
qdev: update pci device registration.
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunchof parameters. Also adds config_read and config_write callbacks toPCIDeviceInfo, so drivers needing these can be converted to the qdevdevice API too....
monitor: Drop pci_addr prefix from hotplug commands
The "pci_addr=" prefix currently required by pci_add/remove anddrive_add has no practical use. Drop it, but still silently accept itfor backward compatibility.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>...
qemu/pci: add pci_get/set_byte
Add pci_get/set_byte to keep *_word and *_long access functions company.They are unused for now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qemu/pci: make default_write_config use mask table
Change much of hw/pci to use symbolic constants and a table-drivendesign: add a mask table with writable bits set and readonly bits unset.Detect change by comparing original and new registers.
This makes it easy to support capabilities where read-only/writeable...
qemu/pci: helper routines for pci access
Add inline routines for convenient access to pci deviceswith correct (little) endianness. Will be used by MSI-X support.
qemu/pci: add routines to manage PCI capabilities
Add routines to manage PCI capability list. First user will be MSI-X.
qemu/pci: check constant registers on load
Add "cmask" table of constant register masks: if a bit is not writeableand is set in cmask table, this bit is checked on load. An attempt toload an image that would change such a register causes load to fail....
qemu/pci: MSI-X support functions
Add functions implementing MSI-X support. First user will be virtio-pci.Note that platform must set a flag to declare MSI supported: thisis a safety measure to avoid breaking platforms which should supportMSI-X but currently lack this in the interrupt controller emulation....
Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into structNICinfo. Use it in pci_nic_init(), and remove arguments bus anddevfn.
Don't support addr= in third argument of monitor command pci_add,because that clashes with its first argument. Admittedly unelegant....
Make first argument of monitor command pci_add work
Simply pass the PCI address through qemu_pci_hot_add_nic() topci_nic_init() and through qemu_pci_hot_add_storage() to pci_create().
Before, pci_device_hot_add() passed along the PCI bus to use, andignored any user-specified slot....
Rename pci_register_io_region() to pci_register_bar()
This function is used to manage a PCI BAR, so make the more genericpci_register_io_region() available to other uses.
Signed-off-by: Avi Kivity <avi@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove unused and misnamed field and variable
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add common BusState
Implement and use a common device bus state. The main side-effect isthat creating a bus and attaching it to a parent device are no longerseparate operations. For legacy code we allow a NULL parent, but thatshould go away eventually....
PCI qdev support
Signed-off-by: Paul Brook <paul@codesourcery.com>
LSI SCSI qdev conversion
PCI network qdev conversion
Remove vga_ram_size
The vga_ram_size argument to machine init functions always has the samevalue, and is ignored by many machines (including SPARC32 which has anobsolete ifdef for VGA_RAM_SIZE).
Remove it and push VGA_RAM_SIZE into vga_int.h.
use PCI_HEADER_TYPE.
use symbolic value instead of 0x0e and related value.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Clean up VGA ram allocation.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
Clean some PCI defines (Stefan Weil)
this patch adds some more defines from linux/pci_regs.h tohw/pci.h. There is now no longer a need to define them ineepro100.c, so they were removed there.
Some defines from linux/pci_regs.h had similar, but notthe same defines in hw/pci.h (PCI_REVISION_ID / PCI_REVISION,...
Add and use remaining #defines for PCI device IDs (Stuart Brady)
This patch adds and uses #defines for the remaining hardcoded PCIdevice IDs. It also moves definitions taken from linux/pci_ids.hinto a separate header (hw/pci_ids.h), removes the 'RTL' from...
monitor: Rework API (Jan Kiszka)
Refactor the monitor API and prepare it for decoupled terminals:term_print functions are renamed to monitor_* and all monitor servicesgain a new parameter (mon) that will once refer to the monitor instancethe output is supposed to appear on. However, the argument remains...
kvm/powerpc: Add freescale pci controller's support
This patch add the emulation of freescale's pci controller for MPC85xx platform.
Signed-off-by: Liu Yu <yu.liu@freescale.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6661 c046a42c-6fe2-441c-8c8c-71466251a162
qemu: PCI device, disk and host network hot-add / hot-remove (Marcelo Tosatti)
Add monitor command to hot-add PCI devices (nic and storage).
Syntax is:
pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params
It returns the domain, bus and slot for the newly added device on success....
Parse full PCI device addresses (Markus Armbruster)
This code parses full PCI device addresses. It then rejects domainsother than zero, because these are not supported in QEMU.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>...
qemu: add pci_unregister_device (Marcelo Tosatti)
Unregister the pci device, unassign its IO and memory regions, and freeassociated data.
Add a callback so drivers can free device state.
qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)
Change the PCI network drivers init functions to return the PCIDev, toinform which slot has been hot-plugged.
Also record PCIDevice structure on NICInfo to locate for release on...
qemu: add pci helper functions (Marcelo Tosatti)
Add pci_find_bus/pci_find_device to be used by PCI hotplug.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6592 c046a42c-6fe2-441c-8c8c-71466251a162
Add and use #defines for PCI device classes
This patch adds and uses #defines for PCI device classes and subclases,using a new pci_config_set_class() function, similar to the recentlyadded pci_config_set_vendor_id() and pci_config_set_device_id().
Change since v1: fixed compilation of hw/sun4u.c...
Update #defines for PCI vendor and device IDs from OpenBIOS and Linux
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6490 c046a42c-6fe2-441c-8c8c-71466251a162
Add Simba device ID
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6465 c046a42c-6fe2-441c-8c8c-71466251a162
Define PCI vendor and device IDs in pci.h (Stuart Brady)
This patch defines PCI vendor and device IDs in pci.h (matching thosefrom Linux's pci_ids.h), and uses those definitions where appropriate.
Change from v1: Introduces pci_config_set_vendor_id() / pci_config_set_device_id()...
Add macro for virtio-console PCI device ID (Mark McLoughlin)
Also use the existing macro for the PCI vendor ID
Signed-off-by: Mark McLoughlin <markmc@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6439 c046a42c-6fe2-441c-8c8c-71466251a162
graphical_console_init change (Stefano Stabellini)
Patch 5/7
This patch changes the graphical_console_init function to return anallocated DisplayState instead of a QEMUConsole.
This patch contains just the graphical_console_init change and few othermodifications mainly in console.c and vl.c....
Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)
Add a table of PCI NIC models to pass to qemu_setup_nic_model().
While we're at it, also add a corresponding table of NIC initfunctions.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>...
Add EBUS bridge
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6266 c046a42c-6fe2-441c-8c8c-71466251a162
PCI: Mask writes to RO bits in the command reg of PCI config space
The Command register in the PCI config space has some read-only bits.Any writes to those bits should be masked out.
Signed-off-by: Amit Shah <amit.shah@redhat.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>...
PCI: Mask writes to RO bits in the status reg of PCI config space
The Status register in the PCI config space has some read-only bits.Any writes to those bits should be masked out.
pci: add default pci subsystem id for all devices (Gerd Hoffman)
This sets a default PCI subsystem ID for all emulated PCI devices. PCIspecs require this, so do it.
In many cases it is enougth to know the PCI ID to handle a devicecorrectly. Sometimes a device driver must identify the exact piece of...
SH4: kill a few warnings
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5938 c046a42c-6fe2-441c-8c8c-71466251a162
E1000 NIC emulation (Nir Peleg, patch from Dor Laor).Applied %s/^\([^I ]*\)^I/\1 /g on e1000.c and added e1000 to help message.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3949 c046a42c-6fe2-441c-8c8c-71466251a162
Add -drive parameter, by Laurent Vivier.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3759 c046a42c-6fe2-441c-8c8c-71466251a162
Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162