exec.h cleanup
Move softmmu_exec.h include directives from target-*/exec.h totarget-*/op_helper.c. Move also various other stuff only used inop_helper.c there.
Define global env in dyngen-exec.h.
For i386, move wrappers for segment and FPU helpers from user-exec.c...
Fix unassigned memory access handling
cea5f9a28faa528b6b1b117c9ab2d8828f473fef exposed bugs in unassigned memoryaccess handling. Fix them by always passing CPUState to the handlers.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove exec-all.h include directives
Most exec-all.h include directives are now useless, remove them.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move cpu_has_work and cpu_pc_from_tb to cpu.h
Move functions cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. This isneeded by later patches.
exec.h: fix coding style and change cpu_has_work to return bool
Before the next patch, fix coding style of the areas affected.
Change the type of the return value from cpu_has_work() andqemu_cpu_has_work() to bool.
cpu_loop_exit: avoid using AREG0
Make cpu_loop_exit() take a parameter for CPUState instead of relyingon global env.
target-mips: Fix warning caused by unused local variable
Fix compilation with gcc-4.6, based on a patch from StefanWeil <weil@mail.berlios.de>.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
Conflicts: cpu-all.h
target-mips: Do not check CPU_INTERRUPT_TIMER.
This bit is never set, therefore we should not read it either.
Signed-off-by: Richard Henderson <rth@twiddle.net>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix typos in comments (interupt -> interrupt)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix typo in code and comments
Replace writeable -> writable
Remove unused function parameter from cpu_restore_state
The previous patch removed the need for parameter puc.Is is now unused, so remove it.
Cc: Aurelien Jarno <aurelien@aurel32.net>Reviewed-by: Peter Maydell <peter.maydell@linaro.org>Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Remove unused function parameters from gen_pc_load and rename the function
Function gen_pc_load was introduced in commitd2856f1ad4c259e5766847c49acbb4e390731bd4.The only reason for parameter searched_pc wasa debug statement in target-i386/translate.c....
target-mips: simplify FP comparisons
As the softfloat comparison functions already test for NaN, there is noneed to always call the float*_unordered*() functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-mips: don't hardcode softfloat exception bits
target-mips: fix c.ps.* instructions
Contrary to cabs.ps.* instructions, c.ps.* should not compare the absolutevalue of the operand, but directly the operands.
target-mips: clear softfpu exception state for comparison instructions
MIPS FPU instructions should start with a clean softfpu status. Thisis done for the most instructions, but not for comparison ones.
target-mips: use new float*_unordered*() functions
Use the new float*_unordered*() functions from softfloat instead ofredefining a private version.
softfloat: rename float*_eq() into float*_eq_quiet()
float*_eq functions have a different semantics than other comparisonfunctions. Fix that by first renaming float*_quiet() into float*_eq_quiet().
Note that it is purely mechanical, and the behaviour should be unchanged....
Fix conversions from pointer to tcg_target_long
tcg_gen_exit_tb takes a parameter of type tcg_target_long,so the type casts of pointer to long should be replaced bytype casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where...
Fix trivial "endianness bugs"
Replace endianess -> endianness.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
inline cpu_halted into sole caller
All implementations are now the same, and there is only one caller,so inline the function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[PATCH] [MIPS] Clear softfpu exception state for round, trunc, ceil and floor
MIPS FPU instructions should start with a clean softfpu status. Thisis done for the arithmetic operations and cvt instructions, but notfor round, trunc, ceil and floor.
Signed-off-by: Chris Dearman <chris@mips.com>...
target-mips: fix save_cpu_state() calls
The rule is:- don't save PC if the exception is only triggered by softmmu.- save PC if the exception can be triggered by an helper.
Fix a 64-bit kernel crash when loading modules.
mips: Break TBs after mfc0_count
Break the TB after reading the count register. This makes itpossible to take timer interrupts immediately after a read ofa possibly expired timer.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
softfloat: Rename float*_is_nan() functions to float*_is_quiet_nan()
The softfloat functions float*_is_nan() were badly misnamed,because they return true only for quiet NaNs, not for all NaNs.Rename them to float*_is_quiet_nan() to more accurately reflect...
target-mips: fix host CPU consumption when guest is idle
When the CPU is in wait state, do not wake-up if an interrupt can't betaken. This avoid host CPU running at 100% if a device (e.g. timer) hasan interrupt line left enabled.
Also factorize code to check if interrupts are enabled in...
target-mips: fix translation of MT instructions
The translation of dmt/emt/dvpe/evpe was doing the moral equivalent of:
int x; ... /* no initialization of x */ x = f (x);
which confused later bits of TCG rather badly, leading to crashes.
Fix the helpers to only return results (those instructions have no...
target-xxx: Use fprintf_function (format checking)
fprintf_function uses format checking with GCC_FMT_ATTR.
Cc: Blue Swirl <blauwirbel@gmail.com>Signed-off-by: Stefan Weil <weil@mail.berlios.de>...
mips: avoid write only variables
Compiling with GCC 4.6.0 20100925 produced a lot of warnings like:/src/qemu/target-mips/translate.c: In function 'gen_ld':/src/qemu/target-mips/translate.c:1039:17: error: variable 'opn' set but not used [-Werror=unused-but-set-variable]...
MIPS: fix yield handling
The parameter for yield should be handled as a signed integerfor the comparisons to have any effect.
This also avoids a gcc warning with -Wtype-limits.
mips: Add support for VInt and VEIC irq modes
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
Correctly identify multiple cpus in SMP systems
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove unused constant
Remove unused constant MIPS_FCR0
mips: more fixes to the MIPS interrupt glue logic
Commit 36388314febad3d7675ab919287f03733a560ff6 moved most of theinterrupt logic to cpu-exec.c. Remove the remaining useless codeand fix software interrupts.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>...
mips: Correct MIPS interrupt glue logic for icount
When hw interrupt pending bits in CP0_Cause are set, the CPU shouldsee the hw interrupt line as active. The CPU may or may not take theinterrupt based on internal state (global irq mask etc) but the glue...
target-mips: fix xtlb exception for loongson
Loongson 2E and 2F use the same entry for xtlb and tlb exception, atoffset 0x000.
target-mips: add loongson 2E & 2F integer instructions
This patch adds support for loongson 2E & 2F instructions. They are thesame instructions, but differ by the opcode encoding.
remove exec-all.h inclusion from cpu.h
move cpu_pc_from_tb to target-*/exec.h
remove unused stuff from */exec.h
target-mips: add Loongson support prefetch
Loongson CPU uses a load to zero register for prefetch.Emulate it as a NOP.
target-mips: split load and store
target-mips: fix DINSU instruction
target-mips: enable movn/movz on loongson 2E & 2F
MIPS: Initial support of fulong mini pc (CPU definition)
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-mips: Fix compilation
TCGv t1 needs tcg_temp_free instead of tcg_temp_free_i32.
Cc: Nathan Froyd <froydnj@codesourcery.com>Cc: Aurelien Jarno <aurelien@aurel32.net>Signed-off-by: Stefan Weil <weil@mail.berlios.de>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-mips: add microMIPS exception handler support
Unlike MIPS16, microMIPS lets you choose the ISA mode for your exceptionhandlers. The ISA mode is selectable via a user-writable CP0.Config3flag.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>...
target-mips: define constants for magic numbers
Add FMT_* constants for the floating-point format field in opcodes andtweak a few places to use them. Add enums for various invocations ofFOP and tweak gen_farith and its lone caller accordingly.
target-mips: move FP FMT comments closer to the definitions
target-mips: refactor c{, abs}.cond.fmt insns
Move all knowledge about coprocessor-checking and register numberinginto the gen_cmp* helper functions.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-mips: mips16 cleanups
Change code handling mips16-specific branches to use ISA-neutral specialopcodes. Since there are several places where the delay slotrequirements for microMIPS branches differ from mips16 branches, usingopcodes is easier than checking hflags, then checking mips16...
target-mips: microMIPS ASE support
Add instruction decoding for the microMIPS ASE. All we do is decode andthen forward to the existing gen_* routines.
target-mips: break out [ls][wd]c1 and rdhwr insn generation
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>Acked-by: Richard Henderson <rth@twiddle.net>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-mips: Remove duplicate CPU log.
Logging for -d cpu is done in generic code.
Signed-off-by: Richard Henderson <rth@twiddle.net>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-mips: Fix format specifiers for fpu_fprintf
In the previous patch which introduced fprintf_function toallow parameter checking by gcc some compiler warningsremained unfixed.
These warnings are fixed here.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>...
target-mips: Fix one more format specifier for cpu_fprintf
env->bcond must be printed using TARGET_FMT_ld.
remove TARGET_* defines from translate-all.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Large page TLB flush
QEMU uses a fixed page size for the CPU TLB. If the guest uses largepages then we effectively split these into multiple smaller pages, andpopulate the corresponding TLB entries on demand.
When the guest invalidates the TLB by virtual address we must invalidate...
target-mips: update address space definitions
Target specific usermode cleanup
Disable various target specific code that is only relevant to system emulation.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Remove cpu_get_phys_page_debug from userspace emulation
cpu_get_phys_page_debug makes no sense for userspace emulation, so remove it.
Move TARGET_PHYS_ADDR_SPACE_BITS to target-*/cpu.h.
Removes a set of ifdefs from exec.c.
Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets otherthan Alpha. This will be used for page_find_alloc, which issupposed to be using virtual addresses in the first place....
target-mips: use newer logical ops
target-mips: use setcond when possible
target-mips: fix ROTR and DROTR by zero
target-mips: remove useless sign extension
target-mips: fix CpU exception for coprocessor 0
When we signal a CpU exception for coprocessor 0, we should indicatethat it's for coprocessor 0 instead of coprocessor 1.
target-mips: don't call cpu_loop_exit() from helper.c
In helper.c AREG0 may not correspond do env, so it's not possible tocall cpu_loop_exit() here. Call it from op_helper.c instead.
kill regs_to_env and env_to_regs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
target-mips: No MIPS16 support for 4Kc, 4KEc cores
Fix regression introduced by d19954f46dfc262612c30e9534e660e953049487.
4Kc and 4KEc don't support MIPS16.
target-mips: 4Kc, 4KEc cores do not support MIPS16
4Kc, 4KEc cores do not support MIPS16, so not only theCP0_Config1 had to be fixed (see previous patch),but also MIPS16 instructions must not be executed.
(Hint from Nathan Froyd, thanks).
target-mips: fix user-mode emulation startup
Running programs with the MIPS user-mode emulator fails during dynamicloading, as floating-point instructions are not enabled in inenv->hflags. Move the code for doing so from fpu_init to cpu_reset sothe MIPS_HFLAG_{FPU,F64} setting doesn't get clobbered by cpu_reset...
target-mips: add enums for MIPS16 opcodes
target-mips: add mips16 instruction decoding
There's no good way to add this incrementally, so we do it all at once.The only changes to shared code are in handle_delay_slot. We need toflip ISAMode when doing a jump-and-exchange. We also need to setISAMode the low bit of the target address for jump-to-register....
target-mips: add copyright notice for mips16 work
Also cross off mips16 ASE in TODO.
target-mips: set Config1.CA for MIPS16-aware CPUs
target-mips: add new HFLAGs for JALX and 16/32-bit delay slots
We create separate masks for the "basic" branch hflags and the"extended" branch hflags and define MIPS_HFLAG_BMASK as the logical orof those two. This is done to avoid churning the codebase in lots of...
target-mips: change interrupt bits to be mips16-aware
We need to stash the operating mode into the low bit of the error PC andrestore it on return from interrupts.
target-mips: move ROTR and ROTRV inside gen_shift_{imm, }
It's easier to implement mips16 shift instructions if we're notexamining the opcode inside gen_shift_{imm,}. So move ROTR and ROTRVand do the special-case handling of SRL and SRLV inside decode_opc....
target-mips: make gen_compute_branch 16/32-bit-aware
target-mips: add gen_base_offset_addr
This is a common pattern in existing code. We'll also use it toimplement the mips16 SAVE/RESTORE instructions.
target-mips: split out delay slot handling
Move delay slot handling to common code whose invocation can becontrolled from gen_intermediate_code_internal.
target-mips: use physical address in lladdr
Currently the ll/sc instructions use the virtual address in bothuser and system mode. Use the physical address insteead in systemmode.
target-mips: add a function to do virtual -> physical translations
target-mips: split code raising MMU exception in a separate function
target-mips: factorize load/store code in op_helper.c
target-mips: fix physical address type in MMU functions
target-mips: make CP0_LLAddr register CPU dependent
Depending on the CPU, CP0_LLAddr is either read-only or read-write,and the returned value can be shifted by a variable amount of bits.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
target-mips: rename CP0_LLAddr into lladdr
The variable CP0_LLAddr represent the full lladdr, not the actualregister value, which is only part of this value and depends on theCPU.
target-mips: fix indentation
mips: fix cpu_reset memory leak
Remove cpu_mips_register()- move mmu_init(), fpu_init() and mvp_init() into cpu_mips_init()- move the other parts in cpu_mips_init()
Reported-by: Blue Swirl <blauwirbel@gmail.com>Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Somethinglike this must be presented on the list first so people can provide input...
Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the timebeing.
Signed-off-by: malc <av1474@comtv.ru>
target-mips: make sure constants are in the second argument
mips: Fix spelling in comment
inofficial -> unofficial
Thanks to Blue Swirl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
target-mips: unmatched brackets in if 0
Fix unmatched braket in commented out code
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
target-mips: log instructions start in TCG code
target-mips: remove MAX_OP_PER_INSTR workaround
Now that MAX_OP_PER_INSTR has been increased to a safer value, removedthe target-mips specific workaround.
Add 'static' to please Sparse